Hello,
Small series to convert some of the board files in the mach-pxa directory
to use the new GPIO descriptor interface.
Most notably, the am200epd, am300epd and Spitz matrix keypad among
others are not converted in this series.
Signed-off-by: Duje Mihanović <[email protected]>
---
Changes in v2:
- Address maintainer comments:
- Change mentions of function to function()
- Drop cast in OHCI driver dev_warn() call
- Use %pe in OHCI and reset drivers
- Use GPIO _optional() API in OHCI driver
- Drop unnecessary not-null check in OHCI driver
- Use pr_err() instead of printk() in reset driver
- Rebase on v6.6-rc3
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Duje Mihanović (6):
ARM: pxa: Convert Spitz OHCI to GPIO descriptors
ARM: pxa: Convert Spitz LEDs to GPIO descriptors
ARM: pxa: Convert Spitz CF power control to GPIO descriptors
ARM: pxa: Convert reset driver to GPIO descriptors
ARM: pxa: Convert Spitz hsync to GPIO descriptors
ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors
arch/arm/mach-pxa/gumstix.c | 24 ++++++++-------
arch/arm/mach-pxa/reset.c | 39 ++++++++---------------
arch/arm/mach-pxa/reset.h | 3 +-
arch/arm/mach-pxa/spitz.c | 70 +++++++++++++++++++++++++++++++++---------
drivers/usb/host/ohci-pxa27x.c | 7 +++++
5 files changed, 90 insertions(+), 53 deletions(-)
---
base-commit: 6465e260f48790807eef06b583b38ca9789b6072
change-id: 20230807-pxa-gpio-3ce25d574814
Best regards,
--
Duje Mihanović <[email protected]>