The CSI IP found inside the Renesas RZ/V2M SoC can also work
in SPI target mode.
When working in target mode, the IP will make use of the SS
(Slave Selection) pin, with "low" as default active level.
The active level of SS can be changed to "high" upon setting
property "spi-cs-high" to true.
By default, the SS will be used in target mode, unless property
"renesas,csi-no-ss" is set to true, in which case data will be
shifted in and out purely based on clock activity, and the
logic level of the SS pin will be completely ignored.
Signed-off-by: Fabrizio Castro <[email protected]>
---
v1->v2: I have dropped properties renesas,csi-ss and
renesas,csi-ss-high. I have added property
renesas,csi-no-ss, and to configure SS as active
high one now needs to use property spi-cs-high.
I have also reworded the changelog to use a more
modern terminology (host and target as opposed to
master and slave).
.../devicetree/bindings/spi/renesas,rzv2m-csi.yaml | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
index e59183e53690..bed829837df1 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
@@ -39,6 +39,12 @@ properties:
power-domains:
maxItems: 1
+ renesas,csi-no-ss:
+ type: boolean
+ description:
+ The CSI Slave Selection (SS) pin won't be used to enable transmission and
+ reception. Only available when in target mode.
+
required:
- compatible
- reg
@@ -50,6 +56,9 @@ required:
- '#address-cells'
- '#size-cells'
+dependencies:
+ renesas,csi-no-ss: [ spi-slave ]
+
unevaluatedProperties: false
examples:
--
2.34.1
On Wed, 27 Sep 2023 17:25:07 +0100, Fabrizio Castro wrote:
> The CSI IP found inside the Renesas RZ/V2M SoC can also work
> in SPI target mode.
> When working in target mode, the IP will make use of the SS
> (Slave Selection) pin, with "low" as default active level.
> The active level of SS can be changed to "high" upon setting
> property "spi-cs-high" to true.
> By default, the SS will be used in target mode, unless property
> "renesas,csi-no-ss" is set to true, in which case data will be
> shifted in and out purely based on clock activity, and the
> logic level of the SS pin will be completely ignored.
>
> Signed-off-by: Fabrizio Castro <[email protected]>
> ---
> v1->v2: I have dropped properties renesas,csi-ss and
> renesas,csi-ss-high. I have added property
> renesas,csi-no-ss, and to configure SS as active
> high one now needs to use property spi-cs-high.
> I have also reworded the changelog to use a more
> modern terminology (host and target as opposed to
> master and slave).
>
> .../devicetree/bindings/spi/renesas,rzv2m-csi.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
Reviewed-by: Rob Herring <[email protected]>