2023-09-29 12:48:32

by Luca Weiss

[permalink] [raw]
Subject: [PATCH] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node

Add the USB3+DP Combo QMP PHY port subnodes in the SC7280 SoC DTSI to
avoid duplication in the devices DTs.

Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..4e34d00e246b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3399,6 +3399,32 @@ usb_1_qmpphy: phy@88e8000 {

#clock-cells = <1>;
#phy-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};

usb_2: usb@8cf8800 {

---
base-commit: df964ce9ef9fea10cf131bf6bad8658fde7956f6
change-id: 20230929-sc7280-qmpphy-ports-20afd4212470

Best regards,
--
Luca Weiss <[email protected]>


2023-09-29 20:21:35

by Luca Weiss

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node

On Fri Sep 29, 2023 at 1:44 PM CEST, Konrad Dybcio wrote:
> On 29.09.2023 09:31, Luca Weiss wrote:
> > Add the USB3+DP Combo QMP PHY port subnodes in the SC7280 SoC DTSI to
> > avoid duplication in the devices DTs.
> The rationale here is to make describing the connections between
> certain hw blocks possible. Defining it in the soc dtsi gives us
> a very cool side-effect of not having to repeat this, but it's not
> the main point here

Commit message is copy-pasted from sm8550 commit with has your R-b ;)

But I'll change it for this commit since your comment makes sense.

>
> With the commit msg amended:
>
> Reviewed-by: Konrad Dybcio <[email protected]>
>
> Konrad

2023-09-29 22:06:41

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node

On 29.09.2023 09:31, Luca Weiss wrote:
> Add the USB3+DP Combo QMP PHY port subnodes in the SC7280 SoC DTSI to
> avoid duplication in the devices DTs.
The rationale here is to make describing the connections between
certain hw blocks possible. Defining it in the soc dtsi gives us
a very cool side-effect of not having to repeat this, but it's not
the main point here

With the commit msg amended:

Reviewed-by: Konrad Dybcio <[email protected]>

Konrad