From: Claudiu Beznea <[email protected]>
Add support for reading the frequency of PLL1/4/6 available on RZ/G3S.
The computation formula for PLL frequency is as follows:
Fout = (nir + nfr / 4096) * Fin / (mr * pr)
Signed-off-by: Claudiu Beznea <[email protected]>
---
Changes in v2:
- added GENMASK() defines for DIV_P, DIV_M, DIV_NI, DIV_NF
- used mul_u64_u32_shr() as suggested by Geert on v1
- s/CLK_TYPE_G3S_SAM_PLL/CLK_TYPE_G3S_PLL/g
drivers/clk/renesas/rzg2l-cpg.c | 49 ++++++++++++++++++++++++++++++---
drivers/clk/renesas/rzg2l-cpg.h | 3 ++
2 files changed, 48 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index d936832e098f..02058a2d39ca 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -47,6 +47,11 @@
#define PDIV(val) FIELD_GET(GENMASK(5, 0), val)
#define SDIV(val) FIELD_GET(GENMASK(2, 0), val)
+#define RZG3S_DIV_P GENMASK(28, 26)
+#define RZG3S_DIV_M GENMASK(25, 22)
+#define RZG3S_DIV_NI GENMASK(21, 13)
+#define RZG3S_DIV_NF GENMASK(12, 1)
+
#define CLK_ON_R(reg) (reg)
#define CLK_MON_R(reg) (0x180 + (reg))
#define CLK_RST_R(reg) (reg)
@@ -713,11 +718,43 @@ static const struct clk_ops rzg2l_cpg_pll_ops = {
.recalc_rate = rzg2l_cpg_pll_clk_recalc_rate,
};
+static unsigned long rzg3s_cpg_pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct pll_clk *pll_clk = to_pll(hw);
+ struct rzg2l_cpg_priv *priv = pll_clk->priv;
+ u32 nir, nfr, mr, pr, val;
+ u64 rate;
+
+ if (pll_clk->type != CLK_TYPE_G3S_PLL)
+ return parent_rate;
+
+ val = readl(priv->base + GET_REG_SAMPLL_CLK1(pll_clk->conf));
+
+ pr = 1 << FIELD_GET(RZG3S_DIV_P, val);
+ /* Hardware interprets values higher than 8 as p = 16. */
+ if (pr > 8)
+ pr = 16;
+
+ mr = FIELD_GET(RZG3S_DIV_M, val) + 1;
+ nir = FIELD_GET(RZG3S_DIV_NI, val) + 1;
+ nfr = FIELD_GET(RZG3S_DIV_NF, val);
+
+ rate = mul_u64_u32_shr(parent_rate, 4096 * nir + nfr, 12);
+
+ return DIV_ROUND_CLOSEST_ULL(rate, (mr * pr));
+}
+
+static const struct clk_ops rzg3s_cpg_pll_ops = {
+ .recalc_rate = rzg3s_cpg_pll_clk_recalc_rate,
+};
+
static struct clk * __init
rzg2l_cpg_pll_clk_register(const struct cpg_core_clk *core,
struct clk **clks,
void __iomem *base,
- struct rzg2l_cpg_priv *priv)
+ struct rzg2l_cpg_priv *priv,
+ const struct clk_ops *ops)
{
struct device *dev = priv->dev;
const struct clk *parent;
@@ -735,7 +772,7 @@ rzg2l_cpg_pll_clk_register(const struct cpg_core_clk *core,
parent_name = __clk_get_name(parent);
init.name = core->name;
- init.ops = &rzg2l_cpg_pll_ops;
+ init.ops = ops;
init.flags = 0;
init.parent_names = &parent_name;
init.num_parents = 1;
@@ -830,8 +867,12 @@ rzg2l_cpg_register_core_clk(const struct cpg_core_clk *core,
core->mult, div);
break;
case CLK_TYPE_SAM_PLL:
- clk = rzg2l_cpg_pll_clk_register(core, priv->clks,
- priv->base, priv);
+ clk = rzg2l_cpg_pll_clk_register(core, priv->clks, priv->base, priv,
+ &rzg2l_cpg_pll_ops);
+ break;
+ case CLK_TYPE_G3S_PLL:
+ clk = rzg2l_cpg_pll_clk_register(core, priv->clks, priv->base, priv,
+ &rzg3s_cpg_pll_ops);
break;
case CLK_TYPE_SIPLL5:
clk = rzg2l_cpg_sipll5_register(core, priv->clks, priv);
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index 097fd8f61680..20da0c620b90 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -102,6 +102,7 @@ enum clk_types {
CLK_TYPE_IN, /* External Clock Input */
CLK_TYPE_FF, /* Fixed Factor Clock */
CLK_TYPE_SAM_PLL,
+ CLK_TYPE_G3S_PLL,
/* Clock with divider */
CLK_TYPE_DIV,
@@ -129,6 +130,8 @@ enum clk_types {
DEF_TYPE(_name, _id, _type, .parent = _parent)
#define DEF_SAMPLL(_name, _id, _parent, _conf) \
DEF_TYPE(_name, _id, CLK_TYPE_SAM_PLL, .parent = _parent, .conf = _conf)
+#define DEF_G3S_PLL(_name, _id, _parent, _conf) \
+ DEF_TYPE(_name, _id, CLK_TYPE_G3S_PLL, .parent = _parent, .conf = _conf)
#define DEF_INPUT(_name, _id) \
DEF_TYPE(_name, _id, CLK_TYPE_IN)
#define DEF_FIXED(_name, _id, _parent, _mult, _div) \
--
2.39.2
On Fri, Sep 29, 2023 at 7:39 AM Claudiu <[email protected]> wrote:
> From: Claudiu Beznea <[email protected]>
>
> Add support for reading the frequency of PLL1/4/6 available on RZ/G3S.
> The computation formula for PLL frequency is as follows:
> Fout = (nir + nfr / 4096) * Fin / (mr * pr)
>
> Signed-off-by: Claudiu Beznea <[email protected]>
> ---
>
> Changes in v2:
> - added GENMASK() defines for DIV_P, DIV_M, DIV_NI, DIV_NF
> - used mul_u64_u32_shr() as suggested by Geert on v1
> - s/CLK_TYPE_G3S_SAM_PLL/CLK_TYPE_G3S_PLL/g
Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in renesas-clk-for-v6.7.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds