This series adds support for:
- DisplayPort for J784S4-EVM
- Displayport and HDMI for AM69-SK platform
NOTE: Patch 4/5 introduces the following dtc warning which can be ignored
since its behind W=1 check:
Warning (graph_child_address): /bus@100000/dss@4a00000/ports: graph node
has single child node 'port@0', #address-cells/#size-cells are not
necessary
(This is more accurate description for port and the dtc check should not
differentiate between port@0 and port@1.[0])
Changelog v10->v11:
- Added comment for disabling serdes-refclk (according to comments of v5)
- Update commit message to document why serdes, wiz nodes (2/5) and mhdp-
bridge, tidss nodes (3/5) are disabled.
- Keep only ports in board files and move common properties to main file
and document why ports are kept empty.
v10: https://lore.kernel.org/all/[email protected]/
Changelog v9->v10:
- Remove duplicate properties from dp0_ports node in main file.
- Add reg for the port even though there is only single port in dss_port
since its more accurate description for the port.
- Carry the R-by tags from v9.
v9: https://lore.kernel.org/all/[email protected]/
Changelog v8->v9:
- Fix compatible of serdes_ln_ctrl node
- Fix extra new lines across nodes
- Fix node-names to keep them generic
v8: https://lore.kernel.org/all/[email protected]/
Changelog v7->v8:
- rebase on tag next-20230731
- add AM69 display support
- fix commit heading for patch [2/5]
v7: https://lore.kernel.org/all/[email protected]/
Changelog v6->v7:
- change compatible for scm_conf to 'simple-bus'
- drop main_cpsw node due to driver dependency on [1]
v6: https://lore.kernel.org/all/[email protected]/
Changelog v5->v6:
- Change header file according to [2].
- Add idle-state property in serdes_ln_ctrl node.
- Fix dtbs_check warning due to clock-frequency property in serdes_refclk
node by disabling the node in main.dtsi and enabling it in board file
when the clock-frequency node is actually added.
v5: https://lore.kernel.org/all/[email protected]/
Changelog v4->v5:
- rebased the patches on linux-next tip.
v4: https://lore.kernel.org/all/[email protected]/
Changelog v3->v4:
- add reg property to serdes_ln_ctrl and fix the node name again to
get rid of dtbs_check error.
- reorder reg, reg-names and ranges property for main_cpsw1.
- correct the order for clocks in serdes_wiz nodes to fix dtbs_check
warnings.
- fix indentation in reg, reg-names and clock property for dss node.
- add comments for the reg type in dss registers.
v3: https://lore.kernel.org/all/[email protected]/
Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
(Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
This refclk is being used by all the instances of serdes_wiz which
are disabled by default. So configuring refclk when the serdes nodes
are used for the first time is okay.
v2: https://lore.kernel.org/all/[email protected]/
Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
(Suggested by Andrew)
v1: https://lore.kernel.org/all/[email protected]/
[0]: <https://lore.kernel.org/all/[email protected]/>
[1]: <https://lore.kernel.org/all/[email protected]/>
[2]: <https://lore.kernel.org/all/[email protected]/>
Dasnavis Sabiya (1):
arm64: dts: ti: k3-am69-sk: Add DP and HDMI support
Rahul T R (2):
arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0
Siddharth Vadapalli (2):
arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
mux
arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 229 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 119 +++++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 276 +++++++++++++++++++++
3 files changed, 624 insertions(+)
--
2.25.1