Current driver is supports up to 16 buses. The following code fixes
to support up to 256 buses.
update "NWL_ECAM_VALUE_DEFAULT " to 16 can access up to 256MB ECAM
region to detect 256 buses.
Update ecam size to 256MB in device tree binding example.
Remove unwanted code.
Thippeswamy Havalige (4):
PCI: xilinx-nwl: Remove unnecessary code which updates primary,
secondary and sub-ordinate bus numbers
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in example
PCI: xilinx-nwl: Rename ECAM size default macro
PCI: xilinx-nwl: Increase ECAM size to accommodate 256 buses
.../devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 2 +-
drivers/pci/controller/pcie-xilinx-nwl.c | 18 +++---------------
2 files changed, 4 insertions(+), 16 deletions(-)
--
2.25.1
Rename "NWL_ECAM_VALUE_DEFAULT" to a suitable macro name and remove
redundant code
Signed-off-by: Thippeswamy Havalige <[email protected]>
---
changes in v5:
Remove period at end of subject line.
---
drivers/pci/controller/pcie-xilinx-nwl.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index d8a3a08be1d5..8fe0e8a325b0 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -126,7 +126,7 @@
#define E_ECAM_CR_ENABLE BIT(0)
#define E_ECAM_SIZE_LOC GENMASK(20, 16)
#define E_ECAM_SIZE_SHIFT 16
-#define NWL_ECAM_VALUE_DEFAULT 12
+#define NWL_ECAM_MAX_SIZE 12
#define CFG_DMA_REG_BAR GENMASK(2, 0)
#define CFG_PCIE_CACHE GENMASK(7, 0)
@@ -165,7 +165,6 @@ struct nwl_pcie {
u32 ecam_size;
int irq_intx;
int irq_misc;
- u32 ecam_value;
struct nwl_msi msi;
struct irq_domain *legacy_irq_domain;
struct clk *clk;
@@ -674,7 +673,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
- (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
+ (NWL_ECAM_MAX_SIZE << E_ECAM_SIZE_SHIFT),
E_ECAM_CONTROL);
nwl_bridge_writel(pcie, lower_32_bits(pcie->phys_ecam_base),
@@ -782,7 +781,6 @@ static int nwl_pcie_probe(struct platform_device *pdev)
pcie = pci_host_bridge_priv(bridge);
pcie->dev = dev;
- pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
err = nwl_pcie_parse_dt(pcie, pdev);
if (err) {
--
2.25.1
Our controller is expecting ECAM size to be programmed by software. By
programming "NWL_ECAM_VALUE_DEFAULT 12" controller can access up to 16MB
ECAM region which is used to detect 16 buses, so by updating
"NWL_ECAM_VALUE_DEFAULT" to 16 so that controller can access up to 256MB
ECAM region to detect 256 buses.
Signed-off-by: Thippeswamy Havalige <[email protected]>
---
changes in v5:
None.
---
drivers/pci/controller/pcie-xilinx-nwl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 8fe0e8a325b0..e307aceba5c9 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -126,7 +126,7 @@
#define E_ECAM_CR_ENABLE BIT(0)
#define E_ECAM_SIZE_LOC GENMASK(20, 16)
#define E_ECAM_SIZE_SHIFT 16
-#define NWL_ECAM_MAX_SIZE 12
+#define NWL_ECAM_MAX_SIZE 16
#define CFG_DMA_REG_BAR GENMASK(2, 0)
#define CFG_PCIE_CACHE GENMASK(7, 0)
--
2.25.1
The primary,secondary and sub-ordinate bus number registers are updated by
Linux PCI core, so remove code which updates respective fields of type 1
header.
Signed-off-by: Thippeswamy Havalige <[email protected]>
---
changes in v5:
- None
changes in v4:
- None
changes in v3:
- Remove unnecessary period at end of subject line.
- Updated commit message.
changes in v2:
- Code increasing ECAM Size value is added into a seperate patch.
- Modified commit messages.
changes in v1:
- Modified commit messages.
---
drivers/pci/controller/pcie-xilinx-nwl.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 176686bdb15c..d8a3a08be1d5 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -166,7 +166,6 @@ struct nwl_pcie {
int irq_intx;
int irq_misc;
u32 ecam_value;
- u8 last_busno;
struct nwl_msi msi;
struct irq_domain *legacy_irq_domain;
struct clk *clk;
@@ -625,7 +624,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
{
struct device *dev = pcie->dev;
struct platform_device *pdev = to_platform_device(dev);
- u32 breg_val, ecam_val, first_busno = 0;
+ u32 breg_val, ecam_val;
int err;
breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
@@ -683,15 +682,6 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
nwl_bridge_writel(pcie, upper_32_bits(pcie->phys_ecam_base),
E_ECAM_BASE_HI);
- /* Get bus range */
- ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
- pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
- /* Write primary, secondary and subordinate bus numbers */
- ecam_val = first_busno;
- ecam_val |= (first_busno + 1) << 8;
- ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
- writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
-
if (nwl_pcie_link_up(pcie))
dev_info(dev, "Link is UP\n");
else
--
2.25.1
Update ECAM size in example to discover up to 256 buses.
Signed-off-by: Thippeswamy Havalige <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
changes in v5:
None
changes in v4:
None
changes in v3:
Remove period at end of subject line
changes in v2:
None.
changes in v1:
None.
---
Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
index 897602559b37..426f90a47f35 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -118,7 +118,7 @@ examples:
compatible = "xlnx,nwl-pcie-2.11";
reg = <0x0 0xfd0e0000 0x0 0x1000>,
<0x0 0xfd480000 0x0 0x1000>,
- <0x80 0x00000000 0x0 0x1000000>;
+ <0x80 0x00000000 0x0 0x10000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
<0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
--
2.25.1