eDMAv3 patch was accepted.
https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next
This is dts parts.
Add 8qxp edma support and enable lpuart1..3 dma support.
Change from v1 to v2
- rebase scu-pd.c to 6.6rc1
- change "F" to "f"
- Add 8qm edma dts change.
- Add lpuart0 dma setting (console tty will disable dma)
Frank Li (7):
genpd: imx: scu-pd: fixed dma2-ch domain defination
arm64: dts: imx8: add edma[0..3]
arm64: dts: imx8: add edma for uart[0..3]
arm64: dts: imx8qm: Update edma channel for uart[0..3]
arm64: dts: imx8: update lpuart[0..3] irq number
arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3
arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3
.../boot/dts/freescale/imx8-ss-audio.dtsi | 88 +++++++++++++++++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 78 +++++++++++++++-
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 30 +++++++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 26 ++++++
.../boot/dts/freescale/imx8qm-ss-dma.dtsi | 56 ++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 ++++++
drivers/genpd/imx/scu-pd.c | 3 +-
7 files changed, 302 insertions(+), 5 deletions(-)
--
2.34.1
edma<n> is missed, add them.
Signed-off-by: Frank Li <[email protected]>
---
.../boot/dts/freescale/imx8-ss-audio.dtsi | 88 +++++++++++++++++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 62 +++++++++++++
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 30 +++++++
.../boot/dts/freescale/imx8qm-ss-dma.dtsi | 52 +++++++++++
4 files changed, 232 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index f248e78fb1e0..9d75ce467569 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -20,6 +20,63 @@ audio_subsys: bus@59000000 {
#size-cells = <1>;
ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+ edma0: dma-controller@591f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x591f0000 0x190000>;
+ #dma-cells = <3>;
+ shared-interrupt;
+ dma-channels = <24>;
+ dma-channel-mask = <0x5c0c00>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, /* 1 */
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, /* 2 */
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, /* 3 */
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, /* 4 */
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, /* 5 */
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 6 esai0 */
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 7 */
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* 8 spdif0 */
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, /* 9 */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 10 unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 11 unused */
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 12 sai0 */
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 13 */
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 14 sai1 */
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 15 */
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* 16 sai2 */
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* 17 sai3 */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 18 unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 19 unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 20 unused */
+ <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, /* 21 */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 22 unused */
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; /* 23 unused */
+ power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+ <&pd IMX_SC_R_DMA_0_CH1>,
+ <&pd IMX_SC_R_DMA_0_CH2>,
+ <&pd IMX_SC_R_DMA_0_CH3>,
+ <&pd IMX_SC_R_DMA_0_CH4>,
+ <&pd IMX_SC_R_DMA_0_CH5>,
+ <&pd IMX_SC_R_DMA_0_CH6>,
+ <&pd IMX_SC_R_DMA_0_CH7>,
+ <&pd IMX_SC_R_DMA_0_CH8>,
+ <&pd IMX_SC_R_DMA_0_CH9>,
+ <&pd IMX_SC_R_DMA_0_CH10>,
+ <&pd IMX_SC_R_DMA_0_CH11>,
+ <&pd IMX_SC_R_DMA_0_CH12>,
+ <&pd IMX_SC_R_DMA_0_CH13>,
+ <&pd IMX_SC_R_DMA_0_CH14>,
+ <&pd IMX_SC_R_DMA_0_CH15>,
+ <&pd IMX_SC_R_DMA_0_CH16>,
+ <&pd IMX_SC_R_DMA_0_CH17>,
+ <&pd IMX_SC_R_DMA_0_CH18>,
+ <&pd IMX_SC_R_DMA_0_CH19>,
+ <&pd IMX_SC_R_DMA_0_CH20>,
+ <&pd IMX_SC_R_DMA_0_CH21>,
+ <&pd IMX_SC_R_DMA_0_CH22>,
+ <&pd IMX_SC_R_DMA_0_CH23>;
+ };
+
dsp_lpcg: clock-controller@59580000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x59580000 0x10000>;
@@ -65,4 +122,35 @@ dsp: dsp@596e8000 {
memory-region = <&dsp_reserved>;
status = "disabled";
};
+
+ edma1: dma-controller@599f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x599f0000 0xc0000>;
+ #dma-cells = <3>;
+ shared-interrupt;
+ dma-channels = <11>;
+ dma-channel-mask = <0xc0>;
+ interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, /* 1 */
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, /* 2 */
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, /* 3 */
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, /* 4 */
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, /* 5 */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 6 unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 7 unused */
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+ power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
+ <&pd IMX_SC_R_DMA_1_CH1>,
+ <&pd IMX_SC_R_DMA_1_CH2>,
+ <&pd IMX_SC_R_DMA_1_CH3>,
+ <&pd IMX_SC_R_DMA_1_CH4>,
+ <&pd IMX_SC_R_DMA_1_CH5>,
+ <&pd IMX_SC_R_DMA_1_CH6>,
+ <&pd IMX_SC_R_DMA_1_CH7>,
+ <&pd IMX_SC_R_DMA_1_CH8>,
+ <&pd IMX_SC_R_DMA_1_CH9>,
+ <&pd IMX_SC_R_DMA_1_CH10>;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index a206526665d6..0519edd3f520 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -145,6 +145,68 @@ adma_pwm: pwm@5a190000 {
power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
};
+ edma2: dma-controller@5a1f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x5a1f0000 0x170000>;
+ #dma-cells = <3>;
+ dma-channels = <16>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+ <&pd IMX_SC_R_DMA_2_CH1>,
+ <&pd IMX_SC_R_DMA_2_CH2>,
+ <&pd IMX_SC_R_DMA_2_CH3>,
+ <&pd IMX_SC_R_DMA_2_CH4>,
+ <&pd IMX_SC_R_DMA_2_CH5>,
+ <&pd IMX_SC_R_DMA_2_CH6>,
+ <&pd IMX_SC_R_DMA_2_CH7>,
+ <&pd IMX_SC_R_DMA_2_CH8>,
+ <&pd IMX_SC_R_DMA_2_CH9>,
+ <&pd IMX_SC_R_DMA_2_CH10>,
+ <&pd IMX_SC_R_DMA_2_CH11>,
+ <&pd IMX_SC_R_DMA_2_CH12>,
+ <&pd IMX_SC_R_DMA_2_CH13>,
+ <&pd IMX_SC_R_DMA_2_CH14>,
+ <&pd IMX_SC_R_DMA_2_CH15>;
+ };
+
+ edma3: dma-controller@5a9f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x5a9f0000 0x90000>;
+ #dma-cells = <3>;
+ dma-channels = <8>;
+ interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+ <&pd IMX_SC_R_DMA_3_CH1>,
+ <&pd IMX_SC_R_DMA_3_CH2>,
+ <&pd IMX_SC_R_DMA_3_CH3>,
+ <&pd IMX_SC_R_DMA_3_CH4>,
+ <&pd IMX_SC_R_DMA_3_CH5>,
+ <&pd IMX_SC_R_DMA_3_CH6>,
+ <&pd IMX_SC_R_DMA_3_CH7>;
+ };
+
spi0_lpcg: clock-controller@5a400000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a400000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
index a9095964ac91..0a477f6318f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -15,6 +15,36 @@ &adc0 {
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
};
+&edma2 {
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&edma3 {
+ interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&i2c0 {
compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index e9b198c13b2f..297ad4ef4a78 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -44,6 +44,58 @@ can2_lpcg: clock-controller@5acf0000 {
};
};
+&edma2 {
+ reg = <0x5a1f0000 0x170000>;
+ #dma-cells = <3>;
+ dma-channels = <22>;
+ dma-channel-mask = <0xf00>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+ <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+ <&pd IMX_SC_R_DMA_0_CH1>,
+ <&pd IMX_SC_R_DMA_0_CH2>,
+ <&pd IMX_SC_R_DMA_0_CH3>,
+ <&pd IMX_SC_R_DMA_0_CH4>,
+ <&pd IMX_SC_R_DMA_0_CH5>,
+ <&pd IMX_SC_R_DMA_0_CH6>,
+ <&pd IMX_SC_R_DMA_0_CH7>,
+ <&pd IMX_SC_R_DMA_0_CH8>,
+ <&pd IMX_SC_R_DMA_0_CH9>,
+ <&pd IMX_SC_R_DMA_0_CH10>,
+ <&pd IMX_SC_R_DMA_0_CH11>,
+ <&pd IMX_SC_R_DMA_0_CH12>,
+ <&pd IMX_SC_R_DMA_0_CH13>,
+ <&pd IMX_SC_R_DMA_0_CH14>,
+ <&pd IMX_SC_R_DMA_0_CH15>,
+ <&pd IMX_SC_R_DMA_0_CH16>,
+ <&pd IMX_SC_R_DMA_0_CH17>,
+ <&pd IMX_SC_R_DMA_0_CH18>,
+ <&pd IMX_SC_R_DMA_0_CH19>,
+ <&pd IMX_SC_R_DMA_0_CH20>,
+ <&pd IMX_SC_R_DMA_0_CH21>;
+ status = "okay";
+};
+
&flexcan1 {
fsl,clk-source = /bits/ 8 <1>;
};
--
2.34.1
Split the 'dma2-ch' resource into two parts due to a gap between
IMX_SC_R_DMA_2_CH4(258) and IMX_SC_R_DMA_2_CH5(427).
Fixes: d4ea45e8a603 ("dt-bindings: imx: add scu resource id headfile")
Signed-off-by: Frank Li <[email protected]>
---
drivers/genpd/imx/scu-pd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/genpd/imx/scu-pd.c b/drivers/genpd/imx/scu-pd.c
index 2f693b67ddb4..891c1d925a9d 100644
--- a/drivers/genpd/imx/scu-pd.c
+++ b/drivers/genpd/imx/scu-pd.c
@@ -150,7 +150,8 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
{ "mclk-out-1", IMX_SC_R_MCLK_OUT_1, 1, false, 0 },
{ "dma0-ch", IMX_SC_R_DMA_0_CH0, 32, true, 0 },
{ "dma1-ch", IMX_SC_R_DMA_1_CH0, 16, true, 0 },
- { "dma2-ch", IMX_SC_R_DMA_2_CH0, 32, true, 0 },
+ { "dma2-ch-0", IMX_SC_R_DMA_2_CH0, 5, true, 0 },
+ { "dma2-ch-1", IMX_SC_R_DMA_2_CH5, 27, true, 0 },
{ "dma3-ch", IMX_SC_R_DMA_3_CH0, 32, true, 0 },
{ "asrc0", IMX_SC_R_ASRC_0, 1, false, 0 },
{ "asrc1", IMX_SC_R_ASRC_1, 1, false, 0 },
--
2.34.1
Enable uart2 and uart3 for imx8qm-mek board.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 26 ++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 0b34cc2250e1..6d50838ad17d 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -47,6 +47,18 @@ &lpuart0 {
status = "okay";
};
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart2>;
+ status = "okay";
+};
+
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart3>;
+ status = "okay";
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
@@ -118,6 +130,20 @@ IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020
>;
};
+ pinctrl_lpuart2: lpuart2grp {
+ fsl,pins = <
+ IMX8QM_UART0_RTS_B_DMA_UART2_RX 0x06000020
+ IMX8QM_UART0_CTS_B_DMA_UART2_TX 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart3: lpuart3grp {
+ fsl,pins = <
+ IMX8QM_M41_GPIO0_00_DMA_UART3_RX 0x06000020
+ IMX8QM_M41_GPIO0_01_DMA_UART3_TX 0x06000020
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
--
2.34.1
Enable uart2 and uart3 for imx8qxp-mek board.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 7924b0969ad8..99611729943c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -187,6 +187,18 @@ &lpuart0 {
status = "okay";
};
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart2>;
+ status = "okay";
+};
+
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart3>;
+ status = "okay";
+};
+
&mu_m0 {
status = "okay";
};
@@ -340,6 +352,20 @@ IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
+ pinctrl_lpuart2: lpuart2grp {
+ fsl,pins = <
+ IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020
+ IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart3: lpuart3grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020
+ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021
--
2.34.1
imx8qm have difference dma channel number for uart[0..3].
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 297ad4ef4a78..01539df335f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -116,18 +116,22 @@ &flexcan3 {
&lpuart0 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+ dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
};
&lpuart1 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+ dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
};
&lpuart2 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+ dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
};
&lpuart3 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+ dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
};
&i2c0 {
--
2.34.1
Add dma support uart[0..3].
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 0519edd3f520..8fd924dfb029 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -93,6 +93,8 @@ lpuart0: serial@5a060000 {
assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_0>;
+ dma-names = "tx","rx";
+ dmas = <&edma2 9 0 0>, <&edma2 8 0 1>;
status = "disabled";
};
@@ -105,6 +107,8 @@ lpuart1: serial@5a070000 {
assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_1>;
+ dma-names = "tx","rx";
+ dmas = <&edma2 11 0 0>, <&edma2 10 0 1>;
status = "disabled";
};
@@ -117,6 +121,8 @@ lpuart2: serial@5a080000 {
assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_2>;
+ dma-names = "tx","rx";
+ dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
status = "disabled";
};
@@ -129,6 +135,8 @@ lpuart3: serial@5a090000 {
assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_3>;
+ dma-names = "tx","rx";
+ dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
status = "disabled";
};
--
2.34.1
Original irq number combined UART irq and DMA irq. These doesn't match
uart driver and dma engine's expection.
Update to the irq numbers, which just uart can trigger.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 8fd924dfb029..ce66d30a4839 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -86,7 +86,7 @@ lpspi3: spi@5a030000 {
lpuart0: serial@5a060000 {
reg = <0x5a060000 0x1000>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
<&uart0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
@@ -100,7 +100,7 @@ lpuart0: serial@5a060000 {
lpuart1: serial@5a070000 {
reg = <0x5a070000 0x1000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
<&uart1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
@@ -114,7 +114,7 @@ lpuart1: serial@5a070000 {
lpuart2: serial@5a080000 {
reg = <0x5a080000 0x1000>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
<&uart2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
@@ -128,7 +128,7 @@ lpuart2: serial@5a080000 {
lpuart3: serial@5a090000 {
reg = <0x5a090000 0x1000>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
<&uart3_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
--
2.34.1
On Mon, Sep 25, 2023 at 04:49:06PM -0400, Frank Li wrote:
> eDMAv3 patch was accepted.
> https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next
>
> This is dts parts.
>
> Add 8qxp edma support and enable lpuart1..3 dma support.
>
> Change from v1 to v2
> - rebase scu-pd.c to 6.6rc1
> - change "F" to "f"
> - Add 8qm edma dts change.
> - Add lpuart0 dma setting (console tty will disable dma)
>
> Frank Li (7):
> genpd: imx: scu-pd: fixed dma2-ch domain defination
> arm64: dts: imx8: add edma[0..3]
> arm64: dts: imx8: add edma for uart[0..3]
> arm64: dts: imx8qm: Update edma channel for uart[0..3]
> arm64: dts: imx8: update lpuart[0..3] irq number
> arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3
> arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3
Applied 2/7 ~ 7/7, thanks!