From: Alisa-Dariana Roman <[email protected]>
Hello,
Here is the updated patch that adds fast settling support for AD7193. I
also added 2 commits to clean up the driver that should be applied
beforehand.
Please consider applying the patches in order.
Thank you!
v3 -> v4
- two commits from the previous series were already applied to
the tree
- add two new commits for cleaning up
- use standard ABI for fast settling feature instead of creating
new attributes
Link: https://lore.kernel.org/all/[email protected]/
v2 -> v3
- move comment line above
- correct FIELD_PREP to FIELD_GET where needed
- remove unnecessary !!
- "rms" -> "RMS"
Link: https://lore.kernel.org/all/[email protected]/
v1 -> v2
- replace old macros with FIELD_PREP() in commit "Use bitfield
access macros"
- update the other commits accordingly
Link: https://lore.kernel.org/all/[email protected]/
Kind regards,
Alisa-Dariana Roman (3):
iio: adc: ad7192: Organize chip info
iio: adc: ad7192: Remove unused member
iio: adc: ad7192: Add fast settling support
drivers/iio/adc/ad7192.c | 156 +++++++++++++++++++++++++--------------
1 file changed, 100 insertions(+), 56 deletions(-)
--
2.34.1
From: Alisa-Dariana Roman <[email protected]>
Move all chip specific data into chip_info structure.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
---
drivers/iio/adc/ad7192.c | 45 ++++++++++++++++------------------------
1 file changed, 18 insertions(+), 27 deletions(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index e0be394ccb34..d72a190c5109 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -171,6 +171,9 @@ enum {
struct ad7192_chip_info {
unsigned int chip_id;
const char *name;
+ const struct iio_chan_spec *channels;
+ u8 num_channels;
+ const struct iio_info *info;
};
struct ad7192_state {
@@ -964,39 +967,33 @@ static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
[ID_AD7190] = {
.chip_id = CHIPID_AD7190,
.name = "ad7190",
+ .channels = ad7192_channels,
+ .num_channels = ARRAY_SIZE(ad7192_channels),
+ .info = &ad7192_info,
},
[ID_AD7192] = {
.chip_id = CHIPID_AD7192,
.name = "ad7192",
+ .channels = ad7192_channels,
+ .num_channels = ARRAY_SIZE(ad7192_channels),
+ .info = &ad7192_info,
},
[ID_AD7193] = {
.chip_id = CHIPID_AD7193,
.name = "ad7193",
+ .channels = ad7193_channels,
+ .num_channels = ARRAY_SIZE(ad7193_channels),
+ .info = &ad7192_info,
},
[ID_AD7195] = {
.chip_id = CHIPID_AD7195,
.name = "ad7195",
+ .channels = ad7192_channels,
+ .num_channels = ARRAY_SIZE(ad7192_channels),
+ .info = &ad7195_info,
},
};
-static int ad7192_channels_config(struct iio_dev *indio_dev)
-{
- struct ad7192_state *st = iio_priv(indio_dev);
-
- switch (st->chip_info->chip_id) {
- case CHIPID_AD7193:
- indio_dev->channels = ad7193_channels;
- indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
- break;
- default:
- indio_dev->channels = ad7192_channels;
- indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
- break;
- }
-
- return 0;
-}
-
static void ad7192_reg_disable(void *reg)
{
regulator_disable(reg);
@@ -1051,15 +1048,9 @@ static int ad7192_probe(struct spi_device *spi)
st->chip_info = (void *)spi_get_device_id(spi)->driver_data;
indio_dev->name = st->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
-
- ret = ad7192_channels_config(indio_dev);
- if (ret < 0)
- return ret;
-
- if (st->chip_info->chip_id == CHIPID_AD7195)
- indio_dev->info = &ad7195_info;
- else
- indio_dev->info = &ad7192_info;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+ indio_dev->info = st->chip_info->info;
ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info);
if (ret)
--
2.34.1
From: Alisa-Dariana Roman <[email protected]>
Remove extend_name from channel macro since it is not used anywhere.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
---
drivers/iio/adc/ad7192.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index d72a190c5109..fe47ef43b3d7 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -895,8 +895,8 @@ static const struct iio_info ad7195_info = {
.update_scan_mode = ad7192_update_scan_mode,
};
-#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \
- _type, _mask_type_av, _ext_info) \
+#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _type, \
+ _mask_type_av, _ext_info) \
{ \
.type = (_type), \
.differential = ((_channel2) == -1 ? 0 : 1), \
@@ -904,7 +904,6 @@ static const struct iio_info ad7195_info = {
.channel = (_channel1), \
.channel2 = (_channel2), \
.address = (_address), \
- .extend_name = (_extend_name), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_OFFSET), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
@@ -922,16 +921,15 @@ static const struct iio_info ad7195_info = {
}
#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
- __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \
- IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \
- ad7192_calibsys_ext_info)
+ __AD719x_CHANNEL(_si, _channel1, _channel2, _address, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
#define AD719x_CHANNEL(_si, _channel1, _address) \
- __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \
+ __AD719x_CHANNEL(_si, _channel1, -1, _address, IIO_VOLTAGE, \
BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
#define AD719x_TEMP_CHANNEL(_si, _address) \
- __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL)
+ __AD719x_CHANNEL(_si, 0, -1, _address, IIO_TEMP, 0, NULL)
static const struct iio_chan_spec ad7192_channels[] = {
AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
--
2.34.1
From: Alisa-Dariana Roman <[email protected]>
Add fast settling mode support for AD7193.
Add two new device specific attributes: oversampling_ratio and
oversampling_ratio_available.
For AD7193 the user can set the average factor by writing to
oversampling_ratio. The possible values are exposed when reading
oversampling_ratio_available.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
---
drivers/iio/adc/ad7192.c | 107 +++++++++++++++++++++++++++++----------
1 file changed, 81 insertions(+), 26 deletions(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index fe47ef43b3d7..954093ee0fbd 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -60,6 +60,8 @@
#define AD7192_MODE_SEL_MASK GENMASK(23, 21) /* Operation Mode Select Mask */
#define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */
#define AD7192_MODE_CLKSRC_MASK GENMASK(19, 18) /* Clock Source Select Mask */
+#define AD7192_MODE_AVG_MASK GENMASK(17, 16)
+ /* Fast Settling Filter Average Select Mask (AD7193 only) */
#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */
#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */
#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
@@ -185,6 +187,7 @@ struct ad7192_state {
u32 mode;
u32 conf;
u32 scale_avail[8][2];
+ u32 oversampling_ratio_avail[4];
u8 gpocon;
u8 clock_sel;
struct mutex lock; /* protect sensor state */
@@ -462,6 +465,11 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
st->scale_avail[i][0] = scale_uv;
}
+ st->oversampling_ratio_avail[0] = 1;
+ st->oversampling_ratio_avail[1] = 2;
+ st->oversampling_ratio_avail[2] = 8;
+ st->oversampling_ratio_avail[3] = 16;
+
return 0;
}
@@ -531,15 +539,21 @@ static ssize_t ad7192_set(struct device *dev,
return ret ? ret : len;
}
-static int ad7192_compute_f_order(bool sinc3_en, bool chop_en)
+static int ad7192_compute_f_order(struct ad7192_state *st, bool sinc3_en, bool chop_en)
{
- if (!chop_en)
+ u8 avg_factor_selected, oversampling_ratio;
+
+ avg_factor_selected = FIELD_GET(AD7192_MODE_AVG_MASK, st->mode);
+
+ if (!avg_factor_selected && !chop_en)
return 1;
+ oversampling_ratio = st->oversampling_ratio_avail[avg_factor_selected];
+
if (sinc3_en)
- return AD7192_SYNC3_FILTER;
+ return AD7192_SYNC3_FILTER + oversampling_ratio - 1;
- return AD7192_SYNC4_FILTER;
+ return AD7192_SYNC4_FILTER + oversampling_ratio - 1;
}
static int ad7192_get_f_order(struct ad7192_state *st)
@@ -549,13 +563,13 @@ static int ad7192_get_f_order(struct ad7192_state *st)
sinc3_en = FIELD_GET(AD7192_MODE_SINC3, st->mode);
chop_en = FIELD_GET(AD7192_CONF_CHOP, st->conf);
- return ad7192_compute_f_order(sinc3_en, chop_en);
+ return ad7192_compute_f_order(st, sinc3_en, chop_en);
}
static int ad7192_compute_f_adc(struct ad7192_state *st, bool sinc3_en,
bool chop_en)
{
- unsigned int f_order = ad7192_compute_f_order(sinc3_en, chop_en);
+ unsigned int f_order = ad7192_compute_f_order(st, sinc3_en, chop_en);
return DIV_ROUND_CLOSEST(st->fclk,
f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
@@ -753,6 +767,9 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
*val = ad7192_get_3db_filter_freq(st);
*val2 = 1000;
return IIO_VAL_FRACTIONAL;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = st->oversampling_ratio_avail[FIELD_GET(AD7192_MODE_AVG_MASK, st->mode)];
+ return IIO_VAL_INT;
}
return -EINVAL;
@@ -810,6 +827,23 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000);
break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = -EINVAL;
+ mutex_lock(&st->lock);
+ for (i = 0; i < ARRAY_SIZE(st->oversampling_ratio_avail); i++)
+ if (val == st->oversampling_ratio_avail[i]) {
+ ret = 0;
+ tmp = st->mode;
+ st->mode &= ~AD7192_MODE_AVG_MASK;
+ st->mode |= FIELD_PREP(AD7192_MODE_AVG_MASK, i);
+ if (tmp == st->mode)
+ break;
+ ad_sd_write_reg(&st->sd, AD7192_REG_MODE,
+ 3, st->mode);
+ break;
+ }
+ mutex_unlock(&st->lock);
+ break;
default:
ret = -EINVAL;
}
@@ -830,6 +864,8 @@ static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return IIO_VAL_INT;
default:
return -EINVAL;
}
@@ -849,6 +885,12 @@ static int ad7192_read_avail(struct iio_dev *indio_dev,
/* Values are stored in a 2D matrix */
*length = ARRAY_SIZE(st->scale_avail) * 2;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *vals = (int *)st->oversampling_ratio_avail;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(st->oversampling_ratio_avail);
+
return IIO_AVAIL_LIST;
}
@@ -896,7 +938,7 @@ static const struct iio_info ad7195_info = {
};
#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _type, \
- _mask_type_av, _ext_info) \
+ _mask_all, _mask_type_av, _mask_all_av, _ext_info) \
{ \
.type = (_type), \
.differential = ((_channel2) == -1 ? 0 : 1), \
@@ -908,8 +950,10 @@ static const struct iio_info ad7195_info = {
BIT(IIO_CHAN_INFO_OFFSET), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
- BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
+ (_mask_all), \
.info_mask_shared_by_type_available = (_mask_type_av), \
+ .info_mask_shared_by_all_available = (_mask_all_av), \
.ext_info = (_ext_info), \
.scan_index = (_si), \
.scan_type = { \
@@ -921,15 +965,26 @@ static const struct iio_info ad7195_info = {
}
#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
- __AD719x_CHANNEL(_si, _channel1, _channel2, _address, IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
+ __AD719x_CHANNEL(_si, _channel1, _channel2, _address, IIO_VOLTAGE, 0, \
+ BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info)
#define AD719x_CHANNEL(_si, _channel1, _address) \
- __AD719x_CHANNEL(_si, _channel1, -1, _address, IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
+ __AD719x_CHANNEL(_si, _channel1, -1, _address, IIO_VOLTAGE, 0, \
+ BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info)
#define AD719x_TEMP_CHANNEL(_si, _address) \
- __AD719x_CHANNEL(_si, 0, -1, _address, IIO_TEMP, 0, NULL)
+ __AD719x_CHANNEL(_si, 0, -1, _address, IIO_TEMP, 0, 0, 0, NULL)
+
+#define AD7193_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
+ __AD719x_CHANNEL(_si, _channel1, _channel2, _address, \
+ IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ ad7192_calibsys_ext_info)
+
+#define AD7193_CHANNEL(_si, _channel1, _address) \
+ AD7193_DIFF_CHANNEL(_si, _channel1, -1, _address)
static const struct iio_chan_spec ad7192_channels[] = {
AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
@@ -944,20 +999,20 @@ static const struct iio_chan_spec ad7192_channels[] = {
};
static const struct iio_chan_spec ad7193_channels[] = {
- AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M),
- AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M),
- AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
- AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
+ AD7193_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M),
+ AD7193_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M),
+ AD7193_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
+ AD7193_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP),
- AD719x_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M),
- AD719x_CHANNEL(6, 1, AD7193_CH_AIN1),
- AD719x_CHANNEL(7, 2, AD7193_CH_AIN2),
- AD719x_CHANNEL(8, 3, AD7193_CH_AIN3),
- AD719x_CHANNEL(9, 4, AD7193_CH_AIN4),
- AD719x_CHANNEL(10, 5, AD7193_CH_AIN5),
- AD719x_CHANNEL(11, 6, AD7193_CH_AIN6),
- AD719x_CHANNEL(12, 7, AD7193_CH_AIN7),
- AD719x_CHANNEL(13, 8, AD7193_CH_AIN8),
+ AD7193_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M),
+ AD7193_CHANNEL(6, 1, AD7193_CH_AIN1),
+ AD7193_CHANNEL(7, 2, AD7193_CH_AIN2),
+ AD7193_CHANNEL(8, 3, AD7193_CH_AIN3),
+ AD7193_CHANNEL(9, 4, AD7193_CH_AIN4),
+ AD7193_CHANNEL(10, 5, AD7193_CH_AIN5),
+ AD7193_CHANNEL(11, 6, AD7193_CH_AIN6),
+ AD7193_CHANNEL(12, 7, AD7193_CH_AIN7),
+ AD7193_CHANNEL(13, 8, AD7193_CH_AIN8),
IIO_CHAN_SOFT_TIMESTAMP(14),
};
--
2.34.1
On Tue, 10 Oct 2023 15:49:23 +0300
[email protected] wrote:
> From: Alisa-Dariana Roman <[email protected]>
>
> Hello,
>
> Here is the updated patch that adds fast settling support for AD7193. I
> also added 2 commits to clean up the driver that should be applied
> beforehand.
>
> Please consider applying the patches in order.
Looks good to me.
Series applied to the togreg branch of iio.git and pushed out as testing
for 0-day to see if it can find anything we missed.
Thanks,
Jonathan
>
> Thank you!
>
> v3 -> v4
> - two commits from the previous series were already applied to
> the tree
> - add two new commits for cleaning up
> - use standard ABI for fast settling feature instead of creating
> new attributes
> Link: https://lore.kernel.org/all/[email protected]/
>
> v2 -> v3
> - move comment line above
> - correct FIELD_PREP to FIELD_GET where needed
> - remove unnecessary !!
> - "rms" -> "RMS"
> Link: https://lore.kernel.org/all/[email protected]/
>
> v1 -> v2
> - replace old macros with FIELD_PREP() in commit "Use bitfield
> access macros"
> - update the other commits accordingly
> Link: https://lore.kernel.org/all/[email protected]/
>
> Kind regards,
>
> Alisa-Dariana Roman (3):
> iio: adc: ad7192: Organize chip info
> iio: adc: ad7192: Remove unused member
> iio: adc: ad7192: Add fast settling support
>
> drivers/iio/adc/ad7192.c | 156 +++++++++++++++++++++++++--------------
> 1 file changed, 100 insertions(+), 56 deletions(-)
>