Regulator drivers were modified to use asynchronous device probe. Since
then, the board .init_late hook fails to acquire a GPIO based fixed
regulator needed by an on-board voice MODEM device, and unregisters the
MODEM. That in turn triggers a so far not discovered bug of device
unregister function called for a device with no associated release() op.
[ 6.823917][ T1] serial8250 serial8250.1: incomplete constraints, dummy supplies not allowed
[ 6.874117][ T1] ------------[ cut here ]------------
[ 6.893918][ T1] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:2486 device_release+0x98/0xa8
[ 6.930626][ T1] Device 'serial8250.1' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.
[ 6.972106][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 6.6.0-rc4-amsdelta+ #66
[ 7.007183][ T1] Hardware name: Amstrad E3 (Delta)
[ 7.026405][ T1] unwind_backtrace from show_stack+0x10/0x18
[ 7.046645][ T1] show_stack from dump_stack_lvl+0x28/0x34
[ 7.066573][ T1] dump_stack_lvl from __warn+0x6c/0xb8
[ 7.085835][ T1] __warn from warn_slowpath_fmt+0x90/0x110
[ 7.105292][ T1] warn_slowpath_fmt from device_release+0x98/0xa8
[ 7.125325][ T1] device_release from kobject_put+0x94/0xe0
[ 7.144741][ T1] kobject_put from put_device+0x10/0x18
[ 7.163623][ T1] put_device from platform_device_put+0x1c/0x24
[ 7.183053][ T1] platform_device_put from ams_delta_init_late+0x4c/0x68
[ 7.203244][ T1] ams_delta_init_late from init_machine_late+0x1c/0x94
[ 7.223197][ T1] init_machine_late from do_one_initcall+0x60/0x1d4
[ 7.242769][ T1] do_one_initcall from kernel_init_freeable+0x19c/0x1d8
[ 7.262608][ T1] kernel_init_freeable from kernel_init+0x10/0x10c
[ 7.281897][ T1] kernel_init from ret_from_fork+0x14/0x38
[ 7.300107][ T1] Exception stack(0xc082bfb0 to 0xc082bff8)
[ 7.318004][ T1] bfa0: 00000000 00000000 00000000 00000000
[ 7.350150][ T1] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.382391][ T1] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 7.413505][ T1] ---[ end trace 0000000000000000 ]---
As a consequence, ASoC codec driver is no longer able to control its
device over the voice MODEM's tty interface.
[ 315.302823][ T822] cx20442-codec cx20442-codec: ASoC: error at soc_component_write_no_lock on cx20442-codec for register: [0x00000000] -5
[ 315.317308][ T822] cx20442-codec cx20442-codec: ASoC: error at snd_soc_component_update_bits_legacy on cx20442-codec for register: [0x00000000] -5
[ 315.332809][ T822] cx20442-codec cx20442-codec: ASoC: error at snd_soc_component_update_bits on cx20442-codec for register: [0x00000000] -5
The regulator hangs of a GPIO pin controlled by basic-mmio-gpio driver.
Unlike most GPIO drivers, that driver doesn't probe for devices before
device_initcall, then GPIO pins under its control are not availabele to
majority of devices probed at that phase, including regulators. On the
other hand, serial8250 driver used by the MODEM device neither accepts via
platform data nor handles regulators, then the board file is not able to
teach that driver to return -EPROBE_DEFER when the regulator is not ready
so the failed probe is retried after late_initcall.
Resolve the issue by extending description of the MODEM device with a
dedicated power management domain. Acquire the regulator from the
domain's .activate hook and return -EPROBE_DEFER if the regulator is not
available. Having that under control, add the regulator device
description to the list of platform devices initialized from .init_machine
and drop the no longer needed custom .init_late hook.
Fixes: 259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Cc: [email protected] # v6.4+
---
arch/arm/mach-omap1/board-ams-delta.c | 60 +++++++--------------------
1 file changed, 16 insertions(+), 44 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 9808cd27e2cf..67de96c7717d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -550,6 +550,7 @@ static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_nand_device,
&ams_delta_lcd_device,
&cx20442_codec_device,
+ &modem_nreset_device,
};
static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
@@ -782,26 +783,28 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = {
{ },
};
+static int ams_delta_modem_pm_activate(struct device *dev)
+{
+ modem_priv.regulator = regulator_get(dev, "RESET#");
+ if (IS_ERR(modem_priv.regulator))
+ return -EPROBE_DEFER;
+
+ return 0;
+}
+
+static struct dev_pm_domain ams_delta_modem_pm_domain = {
+ .activate = ams_delta_modem_pm_activate,
+};
+
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
+ .pm_domain = &ams_delta_modem_pm_domain,
},
};
-static int __init modem_nreset_init(void)
-{
- int err;
-
- err = platform_device_register(&modem_nreset_device);
- if (err)
- pr_err("Couldn't register the modem regulator device\n");
-
- return err;
-}
-
-
/*
* This function expects MODEM IRQ number already assigned to the port.
* The MODEM device requires its RESET# pin kept high during probe.
@@ -833,37 +836,6 @@ static int __init ams_delta_modem_init(void)
}
arch_initcall_sync(ams_delta_modem_init);
-static int __init late_init(void)
-{
- int err;
-
- err = modem_nreset_init();
- if (err)
- return err;
-
- /*
- * Once the modem device is registered, the modem_nreset
- * regulator can be requested on behalf of that device.
- */
- modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
- "RESET#");
- if (IS_ERR(modem_priv.regulator)) {
- err = PTR_ERR(modem_priv.regulator);
- goto unregister;
- }
- return 0;
-
-unregister:
- platform_device_unregister(&ams_delta_modem_device);
- return err;
-}
-
-static void __init ams_delta_init_late(void)
-{
- omap1_init_late();
- late_init();
-}
-
static void __init ams_delta_map_io(void)
{
omap1_map_io();
@@ -877,7 +849,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
- .init_late = ams_delta_init_late,
+ .init_late = omap1_init_late,
.init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
--
2.42.0
Hi,
* Janusz Krzysztofik <[email protected]> [231008 00:47]:
> [ 6.823917][ T1] serial8250 serial8250.1: incomplete constraints, dummy supplies not allowed
> [ 6.874117][ T1] ------------[ cut here ]------------
> [ 6.893918][ T1] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:2486 device_release+0x98/0xa8
> [ 6.930626][ T1] Device 'serial8250.1' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.
The patch looks OK to me, but can you please trim down the warning for
prettier git log output? At least the timestamps can go, and since
you fixed it, you could trim the message down to something like this:
serial8250 serial8250.1: incomplete constraints, dummy supplies not allowed
WARNING: CPU: 0 PID: 1 at drivers/base/core.c:2486 device_release+0x98/0xa8
Device 'serial8250.1' does not have a release() function, it is broken and
must be fixed. See Documentation/core-api/kobject.rst.
...
put_device from platform_device_put+0x1c/0x24
platform_device_put from ams_delta_init_late+0x4c/0x68
ams_delta_init_late from init_machine_late+0x1c/0x94
init_machine_late from do_one_initcall+0x60/0x1d4
This still allows folks seeing similar errors to find them when searching.
Also the ASoC warnings can be trimmed down a bit, formatting up to you
how you prefer them naturally :)
Thanks,
Tony