Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
instead must use adsp core to play sound. Since otherwise the hardware
is, usually, very similar across the devices on the same platform, it
makes sense to reuse the same boardfile.
This series refactors the sc7180.c slightly and adds the functions to
control clocks via adsp instead of controlling the hardware directly.
Existing google devices should experience no change.
Signed-off-by: Nikita Travkin <[email protected]>
---
Nikita Travkin (2):
ASoC: dt-bindings: qcom,sm8250: Add sc7180-qdsp6-sndcard
ASoC: qcom: sc7180: Add support for qdsp6 baked sound
.../devicetree/bindings/sound/qcom,sm8250.yaml | 1 +
sound/soc/qcom/sc7180.c | 195 ++++++++++++++++++---
2 files changed, 174 insertions(+), 22 deletions(-)
---
base-commit: 2030579113a1b1b5bfd7ff24c0852847836d8fd1
change-id: 20231020-sc7180-qdsp-sndcard-e8067017eb4c
Best regards,
--
Nikita Travkin <[email protected]>
Some sc7180 devices use audio adsp to play sound. The setup for this
adsp is similar to the dirrect lpass usage but requires the use of
different link ids and clocks.
This commit adds support for the qdsp based audio, reusing the common
parts like audio codec setup and jack creation.
Since the setup is mostly generic and codec specific setup is guarded
behind a check, a generic compatible is added, similar to other
platforms. Even though those changes target Acer Aspire 1 as the only
user of the adsp audio on this platform present upstream at the moment
of the commit, those changes should be either dirrectly compatible or
trivially expandable to the other devices that will be added in the
future.
Signed-off-by: Nikita Travkin <[email protected]>
---
sound/soc/qcom/sc7180.c | 195 ++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 173 insertions(+), 22 deletions(-)
diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
index 8e433e309f77..b0320a74d508 100644
--- a/sound/soc/qcom/sc7180.c
+++ b/sound/soc/qcom/sc7180.c
@@ -5,6 +5,7 @@
// sc7180.c -- ALSA SoC Machine driver for SC7180
#include <dt-bindings/sound/sc7180-lpass.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
@@ -19,8 +20,10 @@
#include "../codecs/rt5682.h"
#include "../codecs/rt5682s.h"
#include "common.h"
+#include "qdsp6/q6afe.h"
#define DEFAULT_MCLK_RATE 19200000
+#define MI2S_BCLK_RATE 1536000
#define RT5682_PLL1_FREQ (48000 * 512)
#define DRIVER_NAME "SC7180"
@@ -133,12 +136,28 @@ static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
-static int sc7180_snd_startup(struct snd_pcm_substream *substream)
+static int sc7180_qdsp_init(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_card *card = rtd->card;
- struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+
+ switch (cpu_dai->id) {
+ case PRIMARY_MI2S_RX:
+ return sc7180_headset_init(rtd);
+ case PRIMARY_MI2S_TX:
+ case TERTIARY_MI2S_RX:
+ return 0;
+ case DISPLAY_PORT_RX:
+ return sc7180_hdmi_init(rtd);
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+ cpu_dai->id);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int sc7180_startup_realtek_codec(struct snd_soc_pcm_runtime *rtd)
+{
struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
int pll_id, pll_source, pll_in, pll_out, clk_id, ret;
@@ -154,8 +173,40 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream)
clk_id = RT5682S_SCLK_S_PLL2;
pll_out = RT5682_PLL1_FREQ;
pll_in = DEFAULT_MCLK_RATE;
+ } else {
+ return 0;
+ }
+ snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_BC_FC |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_I2S);
+
+ /* Configure PLL1 for codec */
+ ret = snd_soc_dai_set_pll(codec_dai, pll_id, pll_source,
+ pll_in, pll_out);
+ if (ret) {
+ dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+ return ret;
}
+ /* Configure sysclk for codec */
+ ret = snd_soc_dai_set_sysclk(codec_dai, clk_id, pll_out,
+ SND_SOC_CLOCK_IN);
+ if (ret)
+ dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
+ ret);
+
+ return ret;
+}
+
+static int sc7180_snd_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ int ret;
+
switch (cpu_dai->id) {
case MI2S_PRIMARY:
if (++data->pri_mi2s_clk_count == 1) {
@@ -165,30 +216,66 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream)
SNDRV_PCM_STREAM_PLAYBACK);
}
- snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_BC_FC |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_I2S);
-
- /* Configure PLL1 for codec */
- ret = snd_soc_dai_set_pll(codec_dai, pll_id, pll_source,
- pll_in, pll_out);
- if (ret) {
- dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+ ret = sc7180_startup_realtek_codec(rtd);
+ if (ret)
return ret;
+
+ break;
+ case MI2S_SECONDARY:
+ break;
+ case LPASS_DP_RX:
+ break;
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+ cpu_dai->id);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int sc7180_qdsp_snd_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
+ int ret;
+
+ switch (cpu_dai->id) {
+ case PRIMARY_MI2S_RX:
+ case PRIMARY_MI2S_TX:
+ if (++data->pri_mi2s_clk_count == 1) {
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_MCLK_1,
+ DEFAULT_MCLK_RATE,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT,
+ MI2S_BCLK_RATE,
+ SNDRV_PCM_STREAM_PLAYBACK);
}
- /* Configure sysclk for codec */
- ret = snd_soc_dai_set_sysclk(codec_dai, clk_id, pll_out,
- SND_SOC_CLOCK_IN);
+ snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_BP_FP);
+
+ ret = sc7180_startup_realtek_codec(rtd);
if (ret)
- dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
- ret);
+ return ret;
break;
- case MI2S_SECONDARY:
+ case TERTIARY_MI2S_RX:
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT,
+ MI2S_BCLK_RATE,
+ SNDRV_PCM_STREAM_PLAYBACK);
+
+ snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_BC_FC |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_I2S);
+ snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_BP_FP);
break;
- case LPASS_DP_RX:
+ case DISPLAY_PORT_RX:
break;
default:
dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
@@ -246,6 +333,42 @@ static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
}
}
+static void sc7180_qdsp_snd_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+
+ switch (cpu_dai->id) {
+ case PRIMARY_MI2S_RX:
+ case PRIMARY_MI2S_TX:
+ if (--data->pri_mi2s_clk_count == 0) {
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_MCLK_1,
+ 0,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT,
+ 0,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ }
+ break;
+ case TERTIARY_MI2S_RX:
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT,
+ 0,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ break;
+ case DISPLAY_PORT_RX:
+ break;
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+ cpu_dai->id);
+ break;
+ }
+}
+
static int sc7180_adau7002_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
@@ -294,11 +417,30 @@ static int sc7180_adau7002_snd_startup(struct snd_pcm_substream *substream)
return 0;
}
+static int sc7180_qdsp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_interval *rate = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_RATE);
+ struct snd_interval *channels = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+
+ return 0;
+}
+
static const struct snd_soc_ops sc7180_ops = {
.startup = sc7180_snd_startup,
.shutdown = sc7180_snd_shutdown,
};
+static const struct snd_soc_ops sc7180_qdsp_ops = {
+ .startup = sc7180_qdsp_snd_startup,
+ .shutdown = sc7180_qdsp_snd_shutdown,
+};
+
static const struct snd_soc_ops sc7180_adau7002_ops = {
.startup = sc7180_adau7002_snd_startup,
};
@@ -354,7 +496,7 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
struct snd_soc_dai_link *link;
int ret;
int i;
- bool no_headphone = false;
+ bool qdsp = false, no_headphone = false;
/* Allocate the private data */
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -390,6 +532,8 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
no_headphone = true;
card->dapm_widgets = sc7180_adau7002_snd_widgets;
card->num_dapm_widgets = ARRAY_SIZE(sc7180_adau7002_snd_widgets);
+ } else if (of_device_is_compatible(dev->of_node, "qcom,sc7180-qdsp6-sndcard")) {
+ qdsp = true;
}
ret = qcom_snd_parse_of(card);
@@ -400,6 +544,12 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
if (no_headphone) {
link->ops = &sc7180_adau7002_ops;
link->init = sc7180_adau7002_init;
+ } else if (qdsp) {
+ if (link->no_pcm == 1) {
+ link->ops = &sc7180_qdsp_ops;
+ link->be_hw_params_fixup = sc7180_qdsp_be_hw_params_fixup;
+ link->init = sc7180_qdsp_init;
+ }
} else {
link->ops = &sc7180_ops;
link->init = sc7180_init;
@@ -412,6 +562,7 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
static const struct of_device_id sc7180_snd_device_id[] = {
{.compatible = "google,sc7180-trogdor"},
{.compatible = "google,sc7180-coachz"},
+ {.compatible = "qcom,sc7180-qdsp6-sndcard"},
{},
};
MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
--
2.41.0
On 10/20/23 17:33, Nikita Travkin wrote:
> Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
> instead must use adsp core to play sound. Since otherwise the hardware
> is, usually, very similar across the devices on the same platform, it
> makes sense to reuse the same boardfile.
>
> This series refactors the sc7180.c slightly and adds the functions to
> control clocks via adsp instead of controlling the hardware directly.
>
> Existing google devices should experience no change.
>
> Signed-off-by: Nikita Travkin <[email protected]>
> ---
s/baked/backed, unless it's a nice bread :)
Konrad
Konrad Dybcio писал(а) 21.10.2023 21:17:
> On 10/20/23 17:33, Nikita Travkin wrote:
>> Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
>> instead must use adsp core to play sound. Since otherwise the hardware
>> is, usually, very similar across the devices on the same platform, it
>> makes sense to reuse the same boardfile.
>>
>> This series refactors the sc7180.c slightly and adds the functions to
>> control clocks via adsp instead of controlling the hardware directly.
>>
>> Existing google devices should experience no change.
>>
>> Signed-off-by: Nikita Travkin <[email protected]>
>> ---
> s/baked/backed, unless it's a nice bread :)
At least I was consistent in failing to pick the correct word...
If we get to v2, I will try to remember about those, but if not,
I guess I will accept the chance, that in a couple of years I may
wake up in cold sweat upon realizing that this mistake is forever
immortalized in the Linux git history...
Thanks for noticing this!
Nikita
>
> Konrad
On 10/20/23 18:33, Nikita Travkin wrote:
> Some sc7180 devices use audio adsp to play sound. The setup for this
> adsp is similar to the dirrect lpass usage but requires the use of
> different link ids and clocks.
>
> This commit adds support for the qdsp based audio, reusing the common
> parts like audio codec setup and jack creation.
>
> Since the setup is mostly generic and codec specific setup is guarded
> behind a check, a generic compatible is added, similar to other
> platforms. Even though those changes target Acer Aspire 1 as the only
> user of the adsp audio on this platform present upstream at the moment
> of the commit, those changes should be either dirrectly compatible or
> trivially expandable to the other devices that will be added in the
> future.
>
> Signed-off-by: Nikita Travkin <[email protected]>
Tested that sound still works on lazor chromebook
Tested-by: Anton Bambura <[email protected]>
> ---
> sound/soc/qcom/sc7180.c | 195 ++++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 173 insertions(+), 22 deletions(-)
>
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> index 8e433e309f77..b0320a74d508 100644
> --- a/sound/soc/qcom/sc7180.c
> +++ b/sound/soc/qcom/sc7180.c
> @@ -5,6 +5,7 @@
> // sc7180.c -- ALSA SoC Machine driver for SC7180
>
> #include <dt-bindings/sound/sc7180-lpass.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> #include <linux/gpio.h>
> #include <linux/gpio/consumer.h>
> #include <linux/module.h>
> @@ -19,8 +20,10 @@
> #include "../codecs/rt5682.h"
> #include "../codecs/rt5682s.h"
> #include "common.h"
> +#include "qdsp6/q6afe.h"
>
> #define DEFAULT_MCLK_RATE 19200000
> +#define MI2S_BCLK_RATE 1536000
> #define RT5682_PLL1_FREQ (48000 * 512)
>
> #define DRIVER_NAME "SC7180"
> @@ -133,12 +136,28 @@ static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> return 0;
> }
>
> -static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +static int sc7180_qdsp_init(struct snd_soc_pcm_runtime *rtd)
> {
> - struct snd_soc_pcm_runtime *rtd = substream->private_data;
> - struct snd_soc_card *card = rtd->card;
> - struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
> +
> + switch (cpu_dai->id) {
> + case PRIMARY_MI2S_RX:
> + return sc7180_headset_init(rtd);
> + case PRIMARY_MI2S_TX:
> + case TERTIARY_MI2S_RX:
> + return 0;
> + case DISPLAY_PORT_RX:
> + return sc7180_hdmi_init(rtd);
> + default:
> + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> + cpu_dai->id);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int sc7180_startup_realtek_codec(struct snd_soc_pcm_runtime *rtd)
> +{
> struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
> int pll_id, pll_source, pll_in, pll_out, clk_id, ret;
>
> @@ -154,8 +173,40 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> clk_id = RT5682S_SCLK_S_PLL2;
> pll_out = RT5682_PLL1_FREQ;
> pll_in = DEFAULT_MCLK_RATE;
> + } else {
> + return 0;
> + }
> + snd_soc_dai_set_fmt(codec_dai,
> + SND_SOC_DAIFMT_BC_FC |
> + SND_SOC_DAIFMT_NB_NF |
> + SND_SOC_DAIFMT_I2S);
> +
> + /* Configure PLL1 for codec */
> + ret = snd_soc_dai_set_pll(codec_dai, pll_id, pll_source,
> + pll_in, pll_out);
> + if (ret) {
> + dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> + return ret;
> }
>
> + /* Configure sysclk for codec */
> + ret = snd_soc_dai_set_sysclk(codec_dai, clk_id, pll_out,
> + SND_SOC_CLOCK_IN);
> + if (ret)
> + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> + ret);
> +
> + return ret;
> +}
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
> + int ret;
> +
> switch (cpu_dai->id) {
> case MI2S_PRIMARY:
> if (++data->pri_mi2s_clk_count == 1) {
> @@ -165,30 +216,66 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> SNDRV_PCM_STREAM_PLAYBACK);
> }
>
> - snd_soc_dai_set_fmt(codec_dai,
> - SND_SOC_DAIFMT_BC_FC |
> - SND_SOC_DAIFMT_NB_NF |
> - SND_SOC_DAIFMT_I2S);
> -
> - /* Configure PLL1 for codec */
> - ret = snd_soc_dai_set_pll(codec_dai, pll_id, pll_source,
> - pll_in, pll_out);
> - if (ret) {
> - dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> + ret = sc7180_startup_realtek_codec(rtd);
> + if (ret)
> return ret;
> +
> + break;
> + case MI2S_SECONDARY:
> + break;
> + case LPASS_DP_RX:
> + break;
> + default:
> + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> + cpu_dai->id);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int sc7180_qdsp_snd_startup(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
> + struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
> + int ret;
> +
> + switch (cpu_dai->id) {
> + case PRIMARY_MI2S_RX:
> + case PRIMARY_MI2S_TX:
> + if (++data->pri_mi2s_clk_count == 1) {
> + snd_soc_dai_set_sysclk(cpu_dai,
> + Q6AFE_LPASS_CLK_ID_MCLK_1,
> + DEFAULT_MCLK_RATE,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + snd_soc_dai_set_sysclk(cpu_dai,
> + Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT,
> + MI2S_BCLK_RATE,
> + SNDRV_PCM_STREAM_PLAYBACK);
> }
>
> - /* Configure sysclk for codec */
> - ret = snd_soc_dai_set_sysclk(codec_dai, clk_id, pll_out,
> - SND_SOC_CLOCK_IN);
> + snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_BP_FP);
> +
> + ret = sc7180_startup_realtek_codec(rtd);
> if (ret)
> - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> - ret);
> + return ret;
>
> break;
> - case MI2S_SECONDARY:
> + case TERTIARY_MI2S_RX:
> + snd_soc_dai_set_sysclk(cpu_dai,
> + Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT,
> + MI2S_BCLK_RATE,
> + SNDRV_PCM_STREAM_PLAYBACK);
> +
> + snd_soc_dai_set_fmt(codec_dai,
> + SND_SOC_DAIFMT_BC_FC |
> + SND_SOC_DAIFMT_NB_NF |
> + SND_SOC_DAIFMT_I2S);
> + snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_BP_FP);
> break;
> - case LPASS_DP_RX:
> + case DISPLAY_PORT_RX:
> break;
> default:
> dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> @@ -246,6 +333,42 @@ static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> }
> }
>
> +static void sc7180_qdsp_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
> +
> + switch (cpu_dai->id) {
> + case PRIMARY_MI2S_RX:
> + case PRIMARY_MI2S_TX:
> + if (--data->pri_mi2s_clk_count == 0) {
> + snd_soc_dai_set_sysclk(cpu_dai,
> + Q6AFE_LPASS_CLK_ID_MCLK_1,
> + 0,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + snd_soc_dai_set_sysclk(cpu_dai,
> + Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT,
> + 0,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + }
> + break;
> + case TERTIARY_MI2S_RX:
> + snd_soc_dai_set_sysclk(cpu_dai,
> + Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT,
> + 0,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + break;
> + case DISPLAY_PORT_RX:
> + break;
> + default:
> + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> + cpu_dai->id);
> + break;
> + }
> +}
> +
> static int sc7180_adau7002_init(struct snd_soc_pcm_runtime *rtd)
> {
> struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
> @@ -294,11 +417,30 @@ static int sc7180_adau7002_snd_startup(struct snd_pcm_substream *substream)
> return 0;
> }
>
> +static int sc7180_qdsp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_interval *rate = hw_param_interval(params,
> + SNDRV_PCM_HW_PARAM_RATE);
> + struct snd_interval *channels = hw_param_interval(params,
> + SNDRV_PCM_HW_PARAM_CHANNELS);
> +
> + rate->min = rate->max = 48000;
> + channels->min = channels->max = 2;
> +
> + return 0;
> +}
> +
> static const struct snd_soc_ops sc7180_ops = {
> .startup = sc7180_snd_startup,
> .shutdown = sc7180_snd_shutdown,
> };
>
> +static const struct snd_soc_ops sc7180_qdsp_ops = {
> + .startup = sc7180_qdsp_snd_startup,
> + .shutdown = sc7180_qdsp_snd_shutdown,
> +};
> +
> static const struct snd_soc_ops sc7180_adau7002_ops = {
> .startup = sc7180_adau7002_snd_startup,
> };
> @@ -354,7 +496,7 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
> struct snd_soc_dai_link *link;
> int ret;
> int i;
> - bool no_headphone = false;
> + bool qdsp = false, no_headphone = false;
>
> /* Allocate the private data */
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> @@ -390,6 +532,8 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
> no_headphone = true;
> card->dapm_widgets = sc7180_adau7002_snd_widgets;
> card->num_dapm_widgets = ARRAY_SIZE(sc7180_adau7002_snd_widgets);
> + } else if (of_device_is_compatible(dev->of_node, "qcom,sc7180-qdsp6-sndcard")) {
> + qdsp = true;
> }
>
> ret = qcom_snd_parse_of(card);
> @@ -400,6 +544,12 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
> if (no_headphone) {
> link->ops = &sc7180_adau7002_ops;
> link->init = sc7180_adau7002_init;
> + } else if (qdsp) {
> + if (link->no_pcm == 1) {
> + link->ops = &sc7180_qdsp_ops;
> + link->be_hw_params_fixup = sc7180_qdsp_be_hw_params_fixup;
> + link->init = sc7180_qdsp_init;
> + }
> } else {
> link->ops = &sc7180_ops;
> link->init = sc7180_init;
> @@ -412,6 +562,7 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
> static const struct of_device_id sc7180_snd_device_id[] = {
> {.compatible = "google,sc7180-trogdor"},
> {.compatible = "google,sc7180-coachz"},
> + {.compatible = "qcom,sc7180-qdsp6-sndcard"},
> {},
> };
> MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
>
On Fri, 20 Oct 2023 20:33:45 +0500, Nikita Travkin wrote:
> Some devices, such as Acer Aspire 1, can't use lpass dirrectly, but
> instead must use adsp core to play sound. Since otherwise the hardware
> is, usually, very similar across the devices on the same platform, it
> makes sense to reuse the same boardfile.
>
> This series refactors the sc7180.c slightly and adds the functions to
> control clocks via adsp instead of controlling the hardware directly.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: dt-bindings: qcom,sm8250: Add sc7180-qdsp6-sndcard
commit: 5443d186163c6ab0084a5b23c901e0f9ba792463
[2/2] ASoC: qcom: sc7180: Add support for qdsp6 baked sound
commit: 4531f512e3ef147f07d47bceb256c0af5ab130b7
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark