When adding a proper schema for the Marvell mx88e6xxx switch,
the scripts start complaining about this embedded example:
dtschema/dtc warnings/errors:
net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
Fix this up by extending the example with those properties in
the ports node.
While we are at it, rename "ports" to "ethernet-ports" and rename
"switch" to "ethernet-switch" as this is recommended practice.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
---
Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 3a3325168048..ab838c1ffeed 100644
--- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -50,11 +50,14 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0x0>;
- ports {
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
/* Port definitions */
};
--
2.34.1
On Mon, 23 Oct 2023 09:18:53 +0200, Linus Walleij wrote:
> When adding a proper schema for the Marvell mx88e6xxx switch,
> the scripts start complaining about this embedded example:
>
> dtschema/dtc warnings/errors:
> net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
> is a required property
> from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
> net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
> is a required property
> from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
>
> Fix this up by extending the example with those properties in
> the ports node.
>
> While we are at it, rename "ports" to "ethernet-ports" and rename
> "switch" to "ethernet-switch" as this is recommended practice.
>
> Reviewed-by: Andrew Lunn <[email protected]>
> Reviewed-by: Vladimir Oltean <[email protected]>
> Signed-off-by: Linus Walleij <[email protected]>
> ---
> Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
Reviewed-by: Rob Herring <[email protected]>