Convert the lm87 hwmon sensor bindings to DT schema
Signed-off-by: Li peiyu <[email protected]>
---
.../devicetree/bindings/hwmon/lm87.txt | 30 ----------
.../devicetree/bindings/hwmon/lm87.yaml | 59 +++++++++++++++++++
2 files changed, 59 insertions(+), 30 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
- "ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
- remote temperature sensing channel. By default the pins
- are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
- in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
- in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
- configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
- compatible = "ti,lm87";
- reg = <0x2e>;
- has-temp3;
- vcc-supply = <®_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.yaml b/Documentation/devicetree/bindings/hwmon/lm87.yaml
new file mode 100644
index 000000000000..54d6ef6700ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm87.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM87 hwmon sensor
+
+maintainers:
+ - Jean Delvare <[email protected]>
+ - Guenter Roeck <[email protected]>
+
+properties:
+ compatible:
+ const: ti,lm87
+
+ reg:
+ maxItems: 1
+
+ has-temp3:
+ description: |
+ This configures pins 18 and 19 to be used as a second remote
+ temperature sensing channel. By default the pins are configured
+ as voltage input pins in0 and in5.
+
+ has-in6:
+ description: |
+ When set, pin 5 is configured to be used as voltage input in6.
+ Otherwise the pin is set as FAN1 input.
+
+ has-in7:
+ description: |
+ When set, pin 6 is configured to be used as voltage input in7.
+ Otherwise the pin is set as FAN2 input.
+
+ vcc-supply:
+ description: |
+ a Phandle for the regulator supplying power, can be configured to
+ measure 5.0V power supply. Default is 3.3V.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lm87@2e {
+ compatible = "ti,lm87";
+ reg = <0x2e>;
+ has-temp3;
+ vcc-supply = <®_5v0>;
+ };
+ };
--
2.34.1
On 25/10/2023 13:00, Li peiyu wrote:
> Convert the lm87 hwmon sensor bindings to DT schema
>
> Signed-off-by: Li peiyu <[email protected]>
> ---
Missing proper patch versioning (git format-patch -v2), missing
changelog, this is not a v1.
> .../devicetree/bindings/hwmon/lm87.txt | 30 ----------
> .../devicetree/bindings/hwmon/lm87.yaml | 59 +++++++++++++++++++
I don't see my comment addressed.
This is a friendly reminder during the review process.
It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.
> 2 files changed, 59 insertions(+), 30 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
> deleted file mode 100644
> index 758ff398b67b..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/lm87.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -*LM87 hwmon sensor.
> -
> -Required properties:
> -- compatible: Should be
> - "ti,lm87"
> -
> -- reg: I2C address
> -
> -optional properties:
> -- has-temp3: This configures pins 18 and 19 to be used as a second
> - remote temperature sensing channel. By default the pins
> - are configured as voltage input pins in0 and in5.
> -
> -- has-in6: When set, pin 5 is configured to be used as voltage input
> - in6. Otherwise the pin is set as FAN1 input.
> -
> -- has-in7: When set, pin 6 is configured to be used as voltage input
> - in7. Otherwise the pin is set as FAN2 input.
> -
> -- vcc-supply: a Phandle for the regulator supplying power, can be
> - configured to measure 5.0V power supply. Default is 3.3V.
> -
> -Example:
> -
> -lm87@2e {
> - compatible = "ti,lm87";
> - reg = <0x2e>;
> - has-temp3;
> - vcc-supply = <®_5v0>;
> -};
> diff --git a/Documentation/devicetree/bindings/hwmon/lm87.yaml b/Documentation/devicetree/bindings/hwmon/lm87.yaml
> new file mode 100644
> index 000000000000..54d6ef6700ef
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/lm87.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/lm87.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LM87 hwmon sensor
> +
> +maintainers:
> + - Jean Delvare <[email protected]>
> + - Guenter Roeck <[email protected]>
> +
> +properties:
> + compatible:
> + const: ti,lm87
> +
> + reg:
> + maxItems: 1
> +
> + has-temp3:
It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.
> + description: |
> + This configures pins 18 and 19 to be used as a second remote
> + temperature sensing channel. By default the pins are configured
> + as voltage input pins in0 and in5.
> +
> + has-in6:
> + description: |
> + When set, pin 5 is configured to be used as voltage input in6.
> + Otherwise the pin is set as FAN1 input.
> +
> + has-in7:
> + description: |
> + When set, pin 6 is configured to be used as voltage input in7.
> + Otherwise the pin is set as FAN2 input.
> +
> + vcc-supply:
> + description: |
> + a Phandle for the regulator supplying power, can be configured to
> + measure 5.0V power supply. Default is 3.3V.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + lm87@2e {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "ti,lm87";
> + reg = <0x2e>;
> + has-temp3;
> + vcc-supply = <®_5v0>;
Messed indentation. Use 4 spaces for example indentation.
Best regards,
Krzysztof
On Wed, 25 Oct 2023 19:00:03 +0800, Li peiyu wrote:
> Convert the lm87 hwmon sensor bindings to DT schema
>
> Signed-off-by: Li peiyu <[email protected]>
> ---
> .../devicetree/bindings/hwmon/lm87.txt | 30 ----------
> .../devicetree/bindings/hwmon/lm87.yaml | 59 +++++++++++++++++++
> 2 files changed, 59 insertions(+), 30 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/hwmon/lm87.yaml:57:1: [error] syntax error: found character '\t' that cannot start any token (syntax)
dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/hwmon/lm87.example.dts'
Documentation/devicetree/bindings/hwmon/lm87.yaml:57:1: found a tab character where an indentation space is expected
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/hwmon/lm87.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/hwmon/lm87.yaml:57:1: found a tab character where an indentation space is expected
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/lm87.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.