2023-10-27 01:14:49

by Sebastian Reichel

Subject: [PATCH v3 2/4] media: dt-bindings: gc0308: add binding

Add DT binding for GalaxyCore GC0308 camera sensor.

Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
---
.../bindings/media/i2c/galaxycore,gc0308.yaml | 108 ++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
new file mode 100644
index 000000000000..f81e7daed67b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxycore GC0308 and GC0309 Image Sensors
+
+maintainers:
+ - Sebastian Reichel <[email protected]>
+
+description: |
+ The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors
+ programmable through an I2C interface and connected via parallel bus.
+ They include an ISP capable of auto exposure and auto white balance.
+
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: galaxycore,gc0308
+ - items:
+ - const: galaxycore,gc0309
+ - const: galaxycore,gc0308
+
+ reg:
+ const: 0x21
+
+ clocks:
+ description: Reference to the xclk clock.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO descriptor for the reset pin.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO descriptor for the powerdown pin.
+ maxItems: 1
+
+ vdd28-supply:
+ description: 2.8V supply
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: |
+ Video output port.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-width: true
+ data-shift: true
+ hsync-active: true
+ vsync-active: true
+ data-active: true
+ pclk-sample: true
+
+ required:
+ - bus-width
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - powerdown-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera-sensor@21 {
+ compatible = "galaxycore,gc0308";
+ reg = <0x21>;
+ clocks = <&camera_clk>;
+ powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ vdd28-supply = <&vdd28>;
+
+ port {
+ gc0308_ep: endpoint {
+ remote-endpoint = <&parallel_from_gc0308>;
+ bus-width = <8>;
+ data-shift = <2>; /* lines 9:2 are used */
+ hsync-active = <1>; /* active high */
+ vsync-active = <1>; /* active high */
+ data-active = <1>; /* active high */
+ pclk-sample = <1>; /* sample on rising edge */
+ };
+ };
+ };
+ };
+
+...
--
2.42.0