Added 'mask' parameter to the shutdown_write() function. Now it can
either write or update bits, depending on the value of mask. This is
needed, because for alarms a write is necessary, but for resolution only
the resolution bits should be updated.
Signed-off-by: Daniel Matyas <[email protected]>
---
v4 -> v6: No change.
v4: Added patch.
drivers/hwmon/max31827.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c
index 738ce5ca6e39..41e4f716605a 100644
--- a/drivers/hwmon/max31827.c
+++ b/drivers/hwmon/max31827.c
@@ -80,7 +80,7 @@ static const struct regmap_config max31827_regmap = {
};
static int shutdown_write(struct max31827_state *st, unsigned int reg,
- unsigned int val)
+ unsigned int mask, unsigned int val)
{
unsigned int cfg;
unsigned int cnv_rate;
@@ -97,7 +97,10 @@ static int shutdown_write(struct max31827_state *st, unsigned int reg,
mutex_lock(&st->lock);
if (!st->enable) {
- ret = regmap_write(st->regmap, reg, val);
+ if (!mask)
+ ret = regmap_write(st->regmap, reg, val);
+ else
+ ret = regmap_update_bits(st->regmap, reg, mask, val);
goto unlock;
}
@@ -112,7 +115,11 @@ static int shutdown_write(struct max31827_state *st, unsigned int reg,
if (ret)
goto unlock;
- ret = regmap_write(st->regmap, reg, val);
+ if (!mask)
+ ret = regmap_write(st->regmap, reg, val);
+ else
+ ret = regmap_update_bits(st->regmap, reg, mask, val);
+
if (ret)
goto unlock;
@@ -130,7 +137,7 @@ static int write_alarm_val(struct max31827_state *st, unsigned int reg,
{
val = MAX31827_M_DGR_TO_16_BIT(val);
- return shutdown_write(st, reg, val);
+ return shutdown_write(st, reg, 0, val);
}
static umode_t max31827_is_visible(const void *state,
--
2.34.1