Hard reset queued prior to error recovery (or) received during
error recovery will make TCPM to prematurely exit error recovery
sequence. Ignore hard resets received during error recovery (or)
port reset sequence.
```
[46505.459688] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS]
[46505.459706] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS]
[46505.460433] disable vbus discharge ret:0
[46505.461226] Setting usb_comm capable false
[46505.467244] Setting voltage/current limit 0 mV 0 mA
[46505.467262] polarity 0
[46505.470695] Requesting mux state 0, usb-role 0, orientation 0
[46505.475621] cc:=0
[46505.476012] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[46505.476020] Received hard reset
[46505.476024] state change PORT_RESET -> HARD_RESET_START [rev3 HARD_RESET]
```
Cc: [email protected]
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 058d5b853b57..b386102f7a3a 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -5391,6 +5391,15 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port)
if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data)
port->tcpc->set_bist_data(port->tcpc, false);
+ switch (port->state) {
+ case ERROR_RECOVERY:
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ return;
+ default:
+ break;
+ }
+
if (port->ams != NONE_AMS)
port->ams = NONE_AMS;
if (port->hard_reset_count < PD_N_HARD_RESET_COUNT)
base-commit: c70793fb7632a153862ee9060e6d48131469a29c
--
2.42.0.820.g83a721a137-goog