In view of adding support for at least one other chip,
change the driver to move chip-specific properties and
values in a common structure.
No functional changes.
Signed-off-by: Vincent Knecht <[email protected]>
---
drivers/media/i2c/ak7375.c | 110 ++++++++++++++++++++++---------------
1 file changed, 66 insertions(+), 44 deletions(-)
diff --git a/drivers/media/i2c/ak7375.c b/drivers/media/i2c/ak7375.c
index 463b51d46320..3a14eff41531 100644
--- a/drivers/media/i2c/ak7375.c
+++ b/drivers/media/i2c/ak7375.c
@@ -10,30 +10,45 @@
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
-#define AK7375_MAX_FOCUS_POS 4095
-/*
- * This sets the minimum granularity for the focus positions.
- * A value of 1 gives maximum accuracy for a desired focus position
- */
-#define AK7375_FOCUS_STEPS 1
-/*
- * This acts as the minimum granularity of lens movement.
- * Keep this value power of 2, so the control steps can be
- * uniformly adjusted for gradual lens movement, with desired
- * number of control steps.
- */
-#define AK7375_CTRL_STEPS 64
-#define AK7375_CTRL_DELAY_US 1000
-/*
- * The vcm may take up 10 ms (tDELAY) to power on and start taking
- * I2C messages. Based on AK7371 datasheet.
- */
-#define AK7375_POWER_DELAY_US 10000
+struct ak73xx_chipdef {
+ u8 reg_position;
+ u8 reg_cont;
+ u8 shift_pos;
+ u8 mode_active;
+ u8 mode_standby;
+ u16 focus_pos_max;
+ /*
+ * This sets the minimum granularity for the focus positions.
+ * A value of 1 gives maximum accuracy for a desired focus position
+ */
+ u16 focus_steps;
+ /*
+ * This acts as the minimum granularity of lens movement.
+ * Keep this value power of 2, so the control steps can be
+ * uniformly adjusted for gradual lens movement, with desired
+ * number of control steps.
+ */
+ u16 ctrl_steps;
+ u16 ctrl_delay_us;
+ /*
+ * The vcm may take time (tDELAY) to power on and start taking
+ * I2C messages.
+ */
+ u16 power_delay_us;
+};
-#define AK7375_REG_POSITION 0x0
-#define AK7375_REG_CONT 0x2
-#define AK7375_MODE_ACTIVE 0x0
-#define AK7375_MODE_STANDBY 0x40
+static const struct ak73xx_chipdef ak7375_cdef = {
+ .reg_position = 0x0,
+ .reg_cont = 0x2,
+ .shift_pos = 4, /* 12 bits position values, need to << 4 */
+ .mode_active = 0x0,
+ .mode_standby = 0x40,
+ .focus_pos_max = 4095,
+ .focus_steps = 1,
+ .ctrl_steps = 64,
+ .ctrl_delay_us = 1000,
+ .power_delay_us = 10000,
+};
static const char * const ak7375_supply_names[] = {
"vdd",
@@ -42,6 +57,7 @@ static const char * const ak7375_supply_names[] = {
/* ak7375 device structure */
struct ak7375_device {
+ const struct ak73xx_chipdef *cdef;
struct v4l2_ctrl_handler ctrls_vcm;
struct v4l2_subdev sd;
struct v4l2_ctrl *focus;
@@ -86,10 +102,11 @@ static int ak7375_i2c_write(struct ak7375_device *ak7375,
static int ak7375_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct ak7375_device *dev_vcm = to_ak7375_vcm(ctrl);
+ const struct ak73xx_chipdef *cdef = dev_vcm->cdef;
if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE)
- return ak7375_i2c_write(dev_vcm, AK7375_REG_POSITION,
- ctrl->val << 4, 2);
+ return ak7375_i2c_write(dev_vcm, cdef->reg_position,
+ ctrl->val << cdef->shift_pos, 2);
return -EINVAL;
}
@@ -128,11 +145,12 @@ static int ak7375_init_controls(struct ak7375_device *dev_vcm)
{
struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm;
const struct v4l2_ctrl_ops *ops = &ak7375_vcm_ctrl_ops;
+ const struct ak73xx_chipdef *cdef = dev_vcm->cdef;
v4l2_ctrl_handler_init(hdl, 1);
dev_vcm->focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
- 0, AK7375_MAX_FOCUS_POS, AK7375_FOCUS_STEPS, 0);
+ 0, cdef->focus_pos_max, cdef->focus_steps, 0);
if (hdl->error)
dev_err(dev_vcm->sd.dev, "%s fail error: 0x%x\n",
@@ -153,6 +171,8 @@ static int ak7375_probe(struct i2c_client *client)
if (!ak7375_dev)
return -ENOMEM;
+ ak7375_dev->cdef = device_get_match_data(&client->dev);
+
for (i = 0; i < ARRAY_SIZE(ak7375_supply_names); i++)
ak7375_dev->supplies[i].supply = ak7375_supply_names[i];
@@ -206,30 +226,31 @@ static void ak7375_remove(struct i2c_client *client)
/*
* This function sets the vcm position, so it consumes least current
- * The lens position is gradually moved in units of AK7375_CTRL_STEPS,
+ * The lens position is gradually moved in units of ctrl_steps,
* to make the movements smoothly.
*/
static int __maybe_unused ak7375_vcm_suspend(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ak7375_device *ak7375_dev = sd_to_ak7375_vcm(sd);
+ const struct ak73xx_chipdef *cdef = ak7375_dev->cdef;
int ret, val;
if (!ak7375_dev->active)
return 0;
- for (val = ak7375_dev->focus->val & ~(AK7375_CTRL_STEPS - 1);
- val >= 0; val -= AK7375_CTRL_STEPS) {
- ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_POSITION,
- val << 4, 2);
+ for (val = ak7375_dev->focus->val & ~(cdef->ctrl_steps - 1);
+ val >= 0; val -= cdef->ctrl_steps) {
+ ret = ak7375_i2c_write(ak7375_dev, cdef->reg_position,
+ val << cdef->shift_pos, 2);
if (ret)
dev_err_once(dev, "%s I2C failure: %d\n",
__func__, ret);
- usleep_range(AK7375_CTRL_DELAY_US, AK7375_CTRL_DELAY_US + 10);
+ usleep_range(cdef->ctrl_delay_us, cdef->ctrl_delay_us + 10);
}
- ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_CONT,
- AK7375_MODE_STANDBY, 1);
+ ret = ak7375_i2c_write(ak7375_dev, cdef->reg_cont,
+ cdef->mode_standby, 1);
if (ret)
dev_err(dev, "%s I2C failure: %d\n", __func__, ret);
@@ -246,13 +267,14 @@ static int __maybe_unused ak7375_vcm_suspend(struct device *dev)
/*
* This function sets the vcm position to the value set by the user
* through v4l2_ctrl_ops s_ctrl handler
- * The lens position is gradually moved in units of AK7375_CTRL_STEPS,
+ * The lens position is gradually moved in units of ctrl_steps,
* to make the movements smoothly.
*/
static int __maybe_unused ak7375_vcm_resume(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ak7375_device *ak7375_dev = sd_to_ak7375_vcm(sd);
+ const struct ak73xx_chipdef *cdef = ak7375_dev->cdef;
int ret, val;
if (ak7375_dev->active)
@@ -264,24 +286,24 @@ static int __maybe_unused ak7375_vcm_resume(struct device *dev)
return ret;
/* Wait for vcm to become ready */
- usleep_range(AK7375_POWER_DELAY_US, AK7375_POWER_DELAY_US + 500);
+ usleep_range(cdef->power_delay_us, cdef->power_delay_us + 500);
- ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_CONT,
- AK7375_MODE_ACTIVE, 1);
+ ret = ak7375_i2c_write(ak7375_dev, cdef->reg_cont,
+ cdef->mode_active, 1);
if (ret) {
dev_err(dev, "%s I2C failure: %d\n", __func__, ret);
return ret;
}
- for (val = ak7375_dev->focus->val % AK7375_CTRL_STEPS;
+ for (val = ak7375_dev->focus->val % cdef->ctrl_steps;
val <= ak7375_dev->focus->val;
- val += AK7375_CTRL_STEPS) {
- ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_POSITION,
- val << 4, 2);
+ val += cdef->ctrl_steps) {
+ ret = ak7375_i2c_write(ak7375_dev, cdef->reg_position,
+ val << cdef->shift_pos, 2);
if (ret)
dev_err_ratelimited(dev, "%s I2C failure: %d\n",
__func__, ret);
- usleep_range(AK7375_CTRL_DELAY_US, AK7375_CTRL_DELAY_US + 10);
+ usleep_range(cdef->ctrl_delay_us, cdef->ctrl_delay_us + 10);
}
ak7375_dev->active = true;
@@ -290,7 +312,7 @@ static int __maybe_unused ak7375_vcm_resume(struct device *dev)
}
static const struct of_device_id ak7375_of_table[] = {
- { .compatible = "asahi-kasei,ak7375" },
+ { .compatible = "asahi-kasei,ak7375", .data = &ak7375_cdef, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ak7375_of_table);
--
2.41.0