Without this fix the 5120x1440@240 timing of these monitors
leads to screen flickering.
Cc: [email protected] # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1442
Co-developed-by: Harry Wentland <[email protected]>
Signed-off-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
---
drivers/gpu/drm/drm_edid.c | 47 +++++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index bca2af4fe1fc..3fdb8907f66b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -89,6 +89,8 @@ static int oui(u8 first, u8 second, u8 third)
#define EDID_QUIRK_NON_DESKTOP (1 << 12)
/* Cap the DSC target bitrate to 15bpp */
#define EDID_QUIRK_CAP_DSC_15BPP (1 << 13)
+/* Fix up a particular 5120x1440@240Hz timing */
+#define EDID_QUIRK_FIXUP_5120_1440_240 (1 << 14)
#define MICROSOFT_IEEE_OUI 0xca125c
@@ -170,6 +172,12 @@ static const struct edid_quirk {
EDID_QUIRK('S', 'A', 'M', 596, EDID_QUIRK_PREFER_LARGE_60),
EDID_QUIRK('S', 'A', 'M', 638, EDID_QUIRK_PREFER_LARGE_60),
+ /* Samsung C49G95T */
+ EDID_QUIRK('S', 'A', 'M', 0x7053, EDID_QUIRK_FIXUP_5120_1440_240),
+
+ /* Samsung S49AG95 */
+ EDID_QUIRK('S', 'A', 'M', 0x71ac, EDID_QUIRK_FIXUP_5120_1440_240),
+
/* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
EDID_QUIRK('S', 'N', 'Y', 0x2541, EDID_QUIRK_FORCE_12BPC),
@@ -6586,7 +6594,37 @@ static void update_display_info(struct drm_connector *connector,
drm_edid_to_eld(connector, drm_edid);
}
-static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
+static void drm_mode_displayid_detailed_edid_quirks(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ unsigned int hsync_width;
+ unsigned int vsync_width;
+
+ if (connector->display_info.quirks & EDID_QUIRK_FIXUP_5120_1440_240) {
+ if (mode->hdisplay == 5120 && mode->vdisplay == 1440 &&
+ mode->clock == 1939490) {
+ hsync_width = mode->hsync_end - mode->hsync_start;
+ vsync_width = mode->vsync_end - mode->vsync_start;
+
+ mode->clock = 2018490;
+ mode->hdisplay = 5120;
+ mode->hsync_start = 5120 + 8;
+ mode->hsync_end = 5120 + 8 + hsync_width;
+ mode->htotal = 5200;
+
+ mode->vdisplay = 1440;
+ mode->vsync_start = 1440 + 165;
+ mode->vsync_end = 1440 + 165 + vsync_width;
+ mode->vtotal = 1619;
+
+ drm_dbg_kms(connector->dev,
+ "[CONNECTOR:%d:%s] Samsung 240Hz mode quirk applied\n",
+ connector->base.id, connector->name);
+ }
+ }
+}
+
+static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_connector *connector,
struct displayid_detailed_timings_1 *timings,
bool type_7)
{
@@ -6605,7 +6643,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
bool hsync_positive = (timings->hsync[1] >> 7) & 0x1;
bool vsync_positive = (timings->vsync[1] >> 7) & 0x1;
- mode = drm_mode_create(dev);
+ mode = drm_mode_create(connector->dev);
if (!mode)
return NULL;
@@ -6628,6 +6666,9 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
if (timings->flags & 0x80)
mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_displayid_detailed_edid_quirks(connector, mode);
+
drm_mode_set_name(mode);
return mode;
@@ -6650,7 +6691,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
for (i = 0; i < num_timings; i++) {
struct displayid_detailed_timings_1 *timings = &det->timings[i];
- newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7);
+ newmode = drm_mode_displayid_detailed(connector, timings, type_7);
if (!newmode)
continue;
--
2.42.0
On Wed, Nov 1, 2023 at 5:01 PM Hamza Mahfooz <[email protected]> wrote:
>
> Without this fix the 5120x1440@240 timing of these monitors
> leads to screen flickering.
>
> Cc: [email protected] # 6.1+
> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1442
> Co-developed-by: Harry Wentland <[email protected]>
> Signed-off-by: Harry Wentland <[email protected]>
> Signed-off-by: Hamza Mahfooz <[email protected]>
> ---
> drivers/gpu/drm/drm_edid.c | 47 +++++++++++++++++++++++++++++++++++---
> 1 file changed, 44 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index bca2af4fe1fc..3fdb8907f66b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -89,6 +89,8 @@ static int oui(u8 first, u8 second, u8 third)
> #define EDID_QUIRK_NON_DESKTOP (1 << 12)
> /* Cap the DSC target bitrate to 15bpp */
> #define EDID_QUIRK_CAP_DSC_15BPP (1 << 13)
> +/* Fix up a particular 5120x1440@240Hz timing */
> +#define EDID_QUIRK_FIXUP_5120_1440_240 (1 << 14)
What is wrong with the original timing that needs to be fixed?
Alex
>
> #define MICROSOFT_IEEE_OUI 0xca125c
>
> @@ -170,6 +172,12 @@ static const struct edid_quirk {
> EDID_QUIRK('S', 'A', 'M', 596, EDID_QUIRK_PREFER_LARGE_60),
> EDID_QUIRK('S', 'A', 'M', 638, EDID_QUIRK_PREFER_LARGE_60),
>
> + /* Samsung C49G95T */
> + EDID_QUIRK('S', 'A', 'M', 0x7053, EDID_QUIRK_FIXUP_5120_1440_240),
> +
> + /* Samsung S49AG95 */
> + EDID_QUIRK('S', 'A', 'M', 0x71ac, EDID_QUIRK_FIXUP_5120_1440_240),
> +
> /* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
> EDID_QUIRK('S', 'N', 'Y', 0x2541, EDID_QUIRK_FORCE_12BPC),
>
> @@ -6586,7 +6594,37 @@ static void update_display_info(struct drm_connector *connector,
> drm_edid_to_eld(connector, drm_edid);
> }
>
> -static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
> +static void drm_mode_displayid_detailed_edid_quirks(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
> + unsigned int hsync_width;
> + unsigned int vsync_width;
> +
> + if (connector->display_info.quirks & EDID_QUIRK_FIXUP_5120_1440_240) {
> + if (mode->hdisplay == 5120 && mode->vdisplay == 1440 &&
> + mode->clock == 1939490) {
> + hsync_width = mode->hsync_end - mode->hsync_start;
> + vsync_width = mode->vsync_end - mode->vsync_start;
> +
> + mode->clock = 2018490;
> + mode->hdisplay = 5120;
> + mode->hsync_start = 5120 + 8;
> + mode->hsync_end = 5120 + 8 + hsync_width;
> + mode->htotal = 5200;
> +
> + mode->vdisplay = 1440;
> + mode->vsync_start = 1440 + 165;
> + mode->vsync_end = 1440 + 165 + vsync_width;
> + mode->vtotal = 1619;
> +
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] Samsung 240Hz mode quirk applied\n",
> + connector->base.id, connector->name);
> + }
> + }
> +}
> +
> +static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_connector *connector,
> struct displayid_detailed_timings_1 *timings,
> bool type_7)
> {
> @@ -6605,7 +6643,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
> bool hsync_positive = (timings->hsync[1] >> 7) & 0x1;
> bool vsync_positive = (timings->vsync[1] >> 7) & 0x1;
>
> - mode = drm_mode_create(dev);
> + mode = drm_mode_create(connector->dev);
> if (!mode)
> return NULL;
>
> @@ -6628,6 +6666,9 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
>
> if (timings->flags & 0x80)
> mode->type |= DRM_MODE_TYPE_PREFERRED;
> +
> + drm_mode_displayid_detailed_edid_quirks(connector, mode);
> +
> drm_mode_set_name(mode);
>
> return mode;
> @@ -6650,7 +6691,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
> for (i = 0; i < num_timings; i++) {
> struct displayid_detailed_timings_1 *timings = &det->timings[i];
>
> - newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7);
> + newmode = drm_mode_displayid_detailed(connector, timings, type_7);
> if (!newmode)
> continue;
>
> --
> 2.42.0
>
On Wed, 01 Nov 2023, Alex Deucher <[email protected]> wrote:
> On Wed, Nov 1, 2023 at 5:01 PM Hamza Mahfooz <[email protected]> wrote:
>>
>> Without this fix the 5120x1440@240 timing of these monitors
>> leads to screen flickering.
>>
>> Cc: [email protected] # 6.1+
>> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1442
>> Co-developed-by: Harry Wentland <[email protected]>
>> Signed-off-by: Harry Wentland <[email protected]>
>> Signed-off-by: Hamza Mahfooz <[email protected]>
>> ---
>> drivers/gpu/drm/drm_edid.c | 47 +++++++++++++++++++++++++++++++++++---
>> 1 file changed, 44 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>> index bca2af4fe1fc..3fdb8907f66b 100644
>> --- a/drivers/gpu/drm/drm_edid.c
>> +++ b/drivers/gpu/drm/drm_edid.c
>> @@ -89,6 +89,8 @@ static int oui(u8 first, u8 second, u8 third)
>> #define EDID_QUIRK_NON_DESKTOP (1 << 12)
>> /* Cap the DSC target bitrate to 15bpp */
>> #define EDID_QUIRK_CAP_DSC_15BPP (1 << 13)
>> +/* Fix up a particular 5120x1440@240Hz timing */
>> +#define EDID_QUIRK_FIXUP_5120_1440_240 (1 << 14)
>
> What is wrong with the original timing that needs to be fixed?
Indeed. I'd be wary of applying this quirk as-is, because it'll impact
all drivers and all connectors.
The bug report does not have a single EDID from the affected displays
attached.
The quirk sets mode members that apparently do not need to be modified.
Cc: Ville
BR,
Jani.
>
> Alex
>
>
>>
>> #define MICROSOFT_IEEE_OUI 0xca125c
>>
>> @@ -170,6 +172,12 @@ static const struct edid_quirk {
>> EDID_QUIRK('S', 'A', 'M', 596, EDID_QUIRK_PREFER_LARGE_60),
>> EDID_QUIRK('S', 'A', 'M', 638, EDID_QUIRK_PREFER_LARGE_60),
>>
>> + /* Samsung C49G95T */
>> + EDID_QUIRK('S', 'A', 'M', 0x7053, EDID_QUIRK_FIXUP_5120_1440_240),
>> +
>> + /* Samsung S49AG95 */
>> + EDID_QUIRK('S', 'A', 'M', 0x71ac, EDID_QUIRK_FIXUP_5120_1440_240),
>> +
>> /* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
>> EDID_QUIRK('S', 'N', 'Y', 0x2541, EDID_QUIRK_FORCE_12BPC),
>>
>> @@ -6586,7 +6594,37 @@ static void update_display_info(struct drm_connector *connector,
>> drm_edid_to_eld(connector, drm_edid);
>> }
>>
>> -static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
>> +static void drm_mode_displayid_detailed_edid_quirks(struct drm_connector *connector,
>> + struct drm_display_mode *mode)
>> +{
>> + unsigned int hsync_width;
>> + unsigned int vsync_width;
>> +
>> + if (connector->display_info.quirks & EDID_QUIRK_FIXUP_5120_1440_240) {
>> + if (mode->hdisplay == 5120 && mode->vdisplay == 1440 &&
>> + mode->clock == 1939490) {
>> + hsync_width = mode->hsync_end - mode->hsync_start;
>> + vsync_width = mode->vsync_end - mode->vsync_start;
>> +
>> + mode->clock = 2018490;
>> + mode->hdisplay = 5120;
>> + mode->hsync_start = 5120 + 8;
>> + mode->hsync_end = 5120 + 8 + hsync_width;
>> + mode->htotal = 5200;
>> +
>> + mode->vdisplay = 1440;
>> + mode->vsync_start = 1440 + 165;
>> + mode->vsync_end = 1440 + 165 + vsync_width;
>> + mode->vtotal = 1619;
>> +
>> + drm_dbg_kms(connector->dev,
>> + "[CONNECTOR:%d:%s] Samsung 240Hz mode quirk applied\n",
>> + connector->base.id, connector->name);
>> + }
>> + }
>> +}
>> +
>> +static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_connector *connector,
>> struct displayid_detailed_timings_1 *timings,
>> bool type_7)
>> {
>> @@ -6605,7 +6643,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
>> bool hsync_positive = (timings->hsync[1] >> 7) & 0x1;
>> bool vsync_positive = (timings->vsync[1] >> 7) & 0x1;
>>
>> - mode = drm_mode_create(dev);
>> + mode = drm_mode_create(connector->dev);
>> if (!mode)
>> return NULL;
>>
>> @@ -6628,6 +6666,9 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
>>
>> if (timings->flags & 0x80)
>> mode->type |= DRM_MODE_TYPE_PREFERRED;
>> +
>> + drm_mode_displayid_detailed_edid_quirks(connector, mode);
>> +
>> drm_mode_set_name(mode);
>>
>> return mode;
>> @@ -6650,7 +6691,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
>> for (i = 0; i < num_timings; i++) {
>> struct displayid_detailed_timings_1 *timings = &det->timings[i];
>>
>> - newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7);
>> + newmode = drm_mode_displayid_detailed(connector, timings, type_7);
>> if (!newmode)
>> continue;
>>
>> --
>> 2.42.0
>>
--
Jani Nikula, Intel
On 11/1/23 17:36, Alex Deucher wrote:
> On Wed, Nov 1, 2023 at 5:01 PM Hamza Mahfooz <[email protected]> wrote:
>>
>> Without this fix the 5120x1440@240 timing of these monitors
>> leads to screen flickering.
>>
>> Cc: [email protected] # 6.1+
>> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1442
>> Co-developed-by: Harry Wentland <[email protected]>
>> Signed-off-by: Harry Wentland <[email protected]>
>> Signed-off-by: Hamza Mahfooz <[email protected]>
>> ---
>> drivers/gpu/drm/drm_edid.c | 47 +++++++++++++++++++++++++++++++++++---
>> 1 file changed, 44 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>> index bca2af4fe1fc..3fdb8907f66b 100644
>> --- a/drivers/gpu/drm/drm_edid.c
>> +++ b/drivers/gpu/drm/drm_edid.c
>> @@ -89,6 +89,8 @@ static int oui(u8 first, u8 second, u8 third)
>> #define EDID_QUIRK_NON_DESKTOP (1 << 12)
>> /* Cap the DSC target bitrate to 15bpp */
>> #define EDID_QUIRK_CAP_DSC_15BPP (1 << 13)
>> +/* Fix up a particular 5120x1440@240Hz timing */
>> +#define EDID_QUIRK_FIXUP_5120_1440_240 (1 << 14)
>
> What is wrong with the original timing that needs to be fixed?
Apparently, all of timing values for the 5120x1440@240 mode of these
monitors aren't set correctly (they are all lower than they should be)
in their EDIDs. For what it's worth, the windows driver has had a quirk
similar the one proposed in this patch for ~2 years.
>
> Alex
>
>
>>
>> #define MICROSOFT_IEEE_OUI 0xca125c
>>
>> @@ -170,6 +172,12 @@ static const struct edid_quirk {
>> EDID_QUIRK('S', 'A', 'M', 596, EDID_QUIRK_PREFER_LARGE_60),
>> EDID_QUIRK('S', 'A', 'M', 638, EDID_QUIRK_PREFER_LARGE_60),
>>
>> + /* Samsung C49G95T */
>> + EDID_QUIRK('S', 'A', 'M', 0x7053, EDID_QUIRK_FIXUP_5120_1440_240),
>> +
>> + /* Samsung S49AG95 */
>> + EDID_QUIRK('S', 'A', 'M', 0x71ac, EDID_QUIRK_FIXUP_5120_1440_240),
>> +
>> /* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
>> EDID_QUIRK('S', 'N', 'Y', 0x2541, EDID_QUIRK_FORCE_12BPC),
>>
>> @@ -6586,7 +6594,37 @@ static void update_display_info(struct drm_connector *connector,
>> drm_edid_to_eld(connector, drm_edid);
>> }
>>
>> -static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
>> +static void drm_mode_displayid_detailed_edid_quirks(struct drm_connector *connector,
>> + struct drm_display_mode *mode)
>> +{
>> + unsigned int hsync_width;
>> + unsigned int vsync_width;
>> +
>> + if (connector->display_info.quirks & EDID_QUIRK_FIXUP_5120_1440_240) {
>> + if (mode->hdisplay == 5120 && mode->vdisplay == 1440 &&
>> + mode->clock == 1939490) {
>> + hsync_width = mode->hsync_end - mode->hsync_start;
>> + vsync_width = mode->vsync_end - mode->vsync_start;
>> +
>> + mode->clock = 2018490;
>> + mode->hdisplay = 5120;
>> + mode->hsync_start = 5120 + 8;
>> + mode->hsync_end = 5120 + 8 + hsync_width;
>> + mode->htotal = 5200;
>> +
>> + mode->vdisplay = 1440;
>> + mode->vsync_start = 1440 + 165;
>> + mode->vsync_end = 1440 + 165 + vsync_width;
>> + mode->vtotal = 1619;
>> +
>> + drm_dbg_kms(connector->dev,
>> + "[CONNECTOR:%d:%s] Samsung 240Hz mode quirk applied\n",
>> + connector->base.id, connector->name);
>> + }
>> + }
>> +}
>> +
>> +static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_connector *connector,
>> struct displayid_detailed_timings_1 *timings,
>> bool type_7)
>> {
>> @@ -6605,7 +6643,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
>> bool hsync_positive = (timings->hsync[1] >> 7) & 0x1;
>> bool vsync_positive = (timings->vsync[1] >> 7) & 0x1;
>>
>> - mode = drm_mode_create(dev);
>> + mode = drm_mode_create(connector->dev);
>> if (!mode)
>> return NULL;
>>
>> @@ -6628,6 +6666,9 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
>>
>> if (timings->flags & 0x80)
>> mode->type |= DRM_MODE_TYPE_PREFERRED;
>> +
>> + drm_mode_displayid_detailed_edid_quirks(connector, mode);
>> +
>> drm_mode_set_name(mode);
>>
>> return mode;
>> @@ -6650,7 +6691,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
>> for (i = 0; i < num_timings; i++) {
>> struct displayid_detailed_timings_1 *timings = &det->timings[i];
>>
>> - newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7);
>> + newmode = drm_mode_displayid_detailed(connector, timings, type_7);
>> if (!newmode)
>> continue;
>>
>> --
>> 2.42.0
>>
--
Hamza
On Thu, Nov 2, 2023 at 3:00 PM Hamza Mahfooz <[email protected]> wrote:
>
> On 11/1/23 17:36, Alex Deucher wrote:
> > On Wed, Nov 1, 2023 at 5:01 PM Hamza Mahfooz <[email protected]> wrote:
> >>
> >> Without this fix the 5120x1440@240 timing of these monitors
> >> leads to screen flickering.
> >>
> >> Cc: [email protected] # 6.1+
> >> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1442
> >> Co-developed-by: Harry Wentland <[email protected]>
> >> Signed-off-by: Harry Wentland <[email protected]>
> >> Signed-off-by: Hamza Mahfooz <[email protected]>
> >> ---
> >> drivers/gpu/drm/drm_edid.c | 47 +++++++++++++++++++++++++++++++++++---
> >> 1 file changed, 44 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> >> index bca2af4fe1fc..3fdb8907f66b 100644
> >> --- a/drivers/gpu/drm/drm_edid.c
> >> +++ b/drivers/gpu/drm/drm_edid.c
> >> @@ -89,6 +89,8 @@ static int oui(u8 first, u8 second, u8 third)
> >> #define EDID_QUIRK_NON_DESKTOP (1 << 12)
> >> /* Cap the DSC target bitrate to 15bpp */
> >> #define EDID_QUIRK_CAP_DSC_15BPP (1 << 13)
> >> +/* Fix up a particular 5120x1440@240Hz timing */
> >> +#define EDID_QUIRK_FIXUP_5120_1440_240 (1 << 14)
> >
> > What is wrong with the original timing that needs to be fixed?
>
> Apparently, all of timing values for the 5120x1440@240 mode of these
> monitors aren't set correctly (they are all lower than they should be)
> in their EDIDs. For what it's worth, the windows driver has had a quirk
> similar the one proposed in this patch for ~2 years.
It would be good to at least include the original mode timings from
the EDID and the new ones added by the quirk in the commit message and
a description of why they are problematic and why the new ones work.
Alex
>
> >
> > Alex
> >
> >
> >>
> >> #define MICROSOFT_IEEE_OUI 0xca125c
> >>
> >> @@ -170,6 +172,12 @@ static const struct edid_quirk {
> >> EDID_QUIRK('S', 'A', 'M', 596, EDID_QUIRK_PREFER_LARGE_60),
> >> EDID_QUIRK('S', 'A', 'M', 638, EDID_QUIRK_PREFER_LARGE_60),
> >>
> >> + /* Samsung C49G95T */
> >> + EDID_QUIRK('S', 'A', 'M', 0x7053, EDID_QUIRK_FIXUP_5120_1440_240),
> >> +
> >> + /* Samsung S49AG95 */
> >> + EDID_QUIRK('S', 'A', 'M', 0x71ac, EDID_QUIRK_FIXUP_5120_1440_240),
> >> +
> >> /* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
> >> EDID_QUIRK('S', 'N', 'Y', 0x2541, EDID_QUIRK_FORCE_12BPC),
> >>
> >> @@ -6586,7 +6594,37 @@ static void update_display_info(struct drm_connector *connector,
> >> drm_edid_to_eld(connector, drm_edid);
> >> }
> >>
> >> -static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
> >> +static void drm_mode_displayid_detailed_edid_quirks(struct drm_connector *connector,
> >> + struct drm_display_mode *mode)
> >> +{
> >> + unsigned int hsync_width;
> >> + unsigned int vsync_width;
> >> +
> >> + if (connector->display_info.quirks & EDID_QUIRK_FIXUP_5120_1440_240) {
> >> + if (mode->hdisplay == 5120 && mode->vdisplay == 1440 &&
> >> + mode->clock == 1939490) {
> >> + hsync_width = mode->hsync_end - mode->hsync_start;
> >> + vsync_width = mode->vsync_end - mode->vsync_start;
> >> +
> >> + mode->clock = 2018490;
> >> + mode->hdisplay = 5120;
> >> + mode->hsync_start = 5120 + 8;
> >> + mode->hsync_end = 5120 + 8 + hsync_width;
> >> + mode->htotal = 5200;
> >> +
> >> + mode->vdisplay = 1440;
> >> + mode->vsync_start = 1440 + 165;
> >> + mode->vsync_end = 1440 + 165 + vsync_width;
> >> + mode->vtotal = 1619;
> >> +
> >> + drm_dbg_kms(connector->dev,
> >> + "[CONNECTOR:%d:%s] Samsung 240Hz mode quirk applied\n",
> >> + connector->base.id, connector->name);
> >> + }
> >> + }
> >> +}
> >> +
> >> +static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_connector *connector,
> >> struct displayid_detailed_timings_1 *timings,
> >> bool type_7)
> >> {
> >> @@ -6605,7 +6643,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
> >> bool hsync_positive = (timings->hsync[1] >> 7) & 0x1;
> >> bool vsync_positive = (timings->vsync[1] >> 7) & 0x1;
> >>
> >> - mode = drm_mode_create(dev);
> >> + mode = drm_mode_create(connector->dev);
> >> if (!mode)
> >> return NULL;
> >>
> >> @@ -6628,6 +6666,9 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
> >>
> >> if (timings->flags & 0x80)
> >> mode->type |= DRM_MODE_TYPE_PREFERRED;
> >> +
> >> + drm_mode_displayid_detailed_edid_quirks(connector, mode);
> >> +
> >> drm_mode_set_name(mode);
> >>
> >> return mode;
> >> @@ -6650,7 +6691,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
> >> for (i = 0; i < num_timings; i++) {
> >> struct displayid_detailed_timings_1 *timings = &det->timings[i];
> >>
> >> - newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7);
> >> + newmode = drm_mode_displayid_detailed(connector, timings, type_7);
> >> if (!newmode)
> >> continue;
> >>
> >> --
> >> 2.42.0
> >>
> --
> Hamza
>