Use @ and - to conform with kernel-doc style.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Sean Anderson <[email protected]>
---
I have no idea what phase of release the kernel is in. If it is too
late/early in the cycle, please just review this at the appropriate
time. This patch is unlikely to need rebasing, and I am unlikely to
remember to send it later.
drivers/tty/serial/uartlite.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 404c14acafa5..e586d7aeac98 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -62,11 +62,11 @@ static struct uart_port *console_port;
#endif
/**
- * struct uartlite_data: Driver private data
- * reg_ops: Functions to read/write registers
- * clk: Our parent clock, if present
- * baud: The baud rate configured when this device was synthesized
- * cflags: The cflags for parity and data bits
+ * struct uartlite_data - Driver private data
+ * @reg_ops: Functions to read/write registers
+ * @clk: Our parent clock, if present
+ * @baud: The baud rate configured when this device was synthesized
+ * @cflags: The cflags for parity and data bits
*/
struct uartlite_data {
const struct uartlite_reg_ops *reg_ops;
--
2.35.1.1320.gc452695387.dirty
On 11/6/23 07:24, Sean Anderson wrote:
> Use @ and - to conform with kernel-doc style.
>
> Reported-by: kernel test robot <[email protected]>
> Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Thanks.
Greg will probably just wait to apply it sometime after the current
merge window closes. At least that's been my experience.
> ---
> I have no idea what phase of release the kernel is in. If it is too
> late/early in the cycle, please just review this at the appropriate
> time. This patch is unlikely to need rebasing, and I am unlikely to
> remember to send it later.
>
> drivers/tty/serial/uartlite.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
> index 404c14acafa5..e586d7aeac98 100644
> --- a/drivers/tty/serial/uartlite.c
> +++ b/drivers/tty/serial/uartlite.c
> @@ -62,11 +62,11 @@ static struct uart_port *console_port;
> #endif
>
> /**
> - * struct uartlite_data: Driver private data
> - * reg_ops: Functions to read/write registers
> - * clk: Our parent clock, if present
> - * baud: The baud rate configured when this device was synthesized
> - * cflags: The cflags for parity and data bits
> + * struct uartlite_data - Driver private data
> + * @reg_ops: Functions to read/write registers
> + * @clk: Our parent clock, if present
> + * @baud: The baud rate configured when this device was synthesized
> + * @cflags: The cflags for parity and data bits
> */
> struct uartlite_data {
> const struct uartlite_reg_ops *reg_ops;
--
~Randy
On Mon, Nov 6, 2023 at 8:55 PM Sean Anderson <[email protected]> wrote:
>
> Use @ and - to conform with kernel-doc style.
>
> Reported-by: kernel test robot <[email protected]>
> Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Shubhrajyoti Datta <[email protected]>