This series adds the initial (clocks, pinctrl, rpmhpd, regulator, interconnect,
CPU, SoC and board compatibles) device tree support to boot to shell on the
Qualcomm X1E80100 platform, aka Snapdragon X Elite.
Our v1 post of the patchsets adding support for Snapdragon X Elite SoC had
the part number sc8380xp which is now updated to the new part number x1e80100
based on the new branding scheme and refers to the exact same SoC.
v2:
* Update the part number from sc8380xp to x1e80100.
* Fixup ordering in the SoC/board bindings. [Krzysztof]
* Add pdc node and add wakeup tlmm parent. [Rajendra]
* Add cpu/cluster idle states. [Bjorn]
* Document reserved gpios. [Konrad]
* Remove L1 and add missing props to L2. [Konrad]
* Remove region suffix. [Konrad]
* Append digits to gcc node. [Konrad]
* Add ICC_TAGS instead of leaving it unspecified. [Konrad]
* Remove double space. [Konrad]
* Leave the size index of memory node untouched. [Konrad]
* Override the serial uart with "qcom,geni-debug-uart" in the board files. [Rajendra]
* Add additional details to patch 5 commit message. [Konrad/Krzysztof]
Dependencies:
clks: https://lore.kernel.org/lkml/[email protected]/
interconnect: https://lore.kernel.org/lkml/[email protected]/
llcc: https://lore.kernel.org/lkml/[email protected]/
misc-bindings: https://lore.kernel.org/lkml/[email protected]/
pinctrl: https://lore.kernel.org/lkml/[email protected]/
rpmhpd: https://lore.kernel.org/lkml/[email protected]/
Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat
Rajendra Nayak (4):
dt-bindings: arm: cpus: Add qcom,oryon compatible
dt-bindings: arm: qcom: Document X1E80100 SoC and boards
arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts
arm64: defconfig: Enable X1E80100 SoC base configs
Sibi Sankar (1):
arm64: dts: qcom: x1e80100: Add Compute Reference Device
.../devicetree/bindings/arm/cpus.yaml | 1 +
.../devicetree/bindings/arm/qcom.yaml | 8 +
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 425 ++
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 400 ++
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 3509 +++++++++++++++++
arch/arm64/configs/defconfig | 3 +
7 files changed, 4348 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-crd.dts
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100.dtsi
--
2.17.1
From: Rajendra Nayak <[email protected]>
Document the X1E80100 SoC binding and also the boards using it.
Also document the new board id qcp (Qualcomm Compute Platform).
Signed-off-by: Rajendra Nayak <[email protected]>
Co-developed-by: Sibi Sankar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
v2:
* Update the part number from sc8380xp to x1e80100.
* Fixup ordering in the SoC/board bindings. [Krzysztof]
Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 88b84035e7b1..6458ed828819 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -87,6 +87,7 @@ description: |
sm8350
sm8450
sm8550
+ x1e80100
The 'board' element must be one of the following strings:
@@ -110,6 +111,7 @@ description: |
liquid
rdp432-c2
mtp
+ qcp
qrd
rb2
ride
@@ -1044,6 +1046,12 @@ properties:
- qcom,sm8550-qrd
- const: qcom,sm8550
+ - items:
+ - enum:
+ - qcom,x1e80100-crd
+ - qcom,x1e80100-qcp
+ - const: qcom,x1e80100
+
# Board compatibles go above
qcom,msm-id:
--
2.17.1
Add basic support for X1E80100 CRD board dts, which allows it to boot
to a shell.
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
v2:
* Update the part number from sc8380xp to x1e80100.
* Override the serial uart with "qcom,geni-debug-uart" in the board files. [Rajendra]
* Document reserved gpios. [Konrad]
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 425 ++++++++++++++++++++++
2 files changed, 426 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-crd.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 43bd9fcf35e5..e3ab1c91307a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -231,4 +231,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
new file mode 100644
index 000000000000..82d1ecac0ec9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+ compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l4-supply = <&vreg_s4c_1p8>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, <44 4>, /* SPI (TPM) */
+ <238 1>; /* UFS Reset */
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
--
2.17.1
From: Rajendra Nayak <[email protected]>
Enable GCC, Pinctrl and Interconnect configs for Qualcomm's X1E80100 SoC
which is required to boot X1E80100 QCP/CRD boards to a console shell. The
configs are required to be marked as builtin and not modules due to the
console driver dependencies.
Signed-off-by: Rajendra Nayak <[email protected]>
Co-developed-by: Sibi Sankar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
v2:
* Update the part number from sc8380xp to x1e80100.
* Add additional details to patch 5 commit message. [Konrad/Krzysztof]
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index b60aa1f89343..013b22dd12c9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -614,6 +614,7 @@ CONFIG_PINCTRL_SM8450_LPASS_LPI=m
CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
CONFIG_PINCTRL_SM8550=y
CONFIG_PINCTRL_SM8550_LPASS_LPI=m
+CONFIG_PINCTRL_X1E80100=y
CONFIG_PINCTRL_LPASS_LPI=m
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_ALTERA=m
@@ -1266,6 +1267,7 @@ CONFIG_SM_GPUCC_6115=m
CONFIG_SM_GPUCC_8150=y
CONFIG_SM_GPUCC_8250=y
CONFIG_SM_VIDEOCC_8250=y
+CONFIG_X1E_GCC_80100=y
CONFIG_QCOM_HFPLL=y
CONFIG_CLK_GFM_LPASS_SM8250=m
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
@@ -1524,6 +1526,7 @@ CONFIG_INTERCONNECT_QCOM_SM8250=m
CONFIG_INTERCONNECT_QCOM_SM8350=m
CONFIG_INTERCONNECT_QCOM_SM8450=y
CONFIG_INTERCONNECT_QCOM_SM8550=y
+CONFIG_INTERCONNECT_QCOM_X1E80100=y
CONFIG_COUNTER=m
CONFIG_RZ_MTU3_CNT=m
CONFIG_HTE=y
--
2.17.1
From: Rajendra Nayak <[email protected]>
These are the CPU cores in Qualcomm's X1E80100 SoC.
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
v2:
* Update the part number from sc8380xp to x1e80100.
Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index ffd526363fda..cc5a21b47e26 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -198,6 +198,7 @@ properties:
- qcom,kryo660
- qcom,kryo685
- qcom,kryo780
+ - qcom,oryon
- qcom,scorpion
enable-method:
--
2.17.1
From: Rajendra Nayak <[email protected]>
Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
X1E80100 SoC, describing the CPUs, GCC and RPMHCC clock controllers,
geni UART, interrupt controller, TLMM, reserved memory, interconnects,
SMMU and LLCC nodes.
Co-developed-by: Abel Vesa <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Co-developed-by: Sibi Sankar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
v2:
* Update the part number from sc8380xp to x1e80100.
* Add cpu/cluster idle states.
* Document reserved gpios. [Konrad]
* Remove L1 and add missing props to L2. [Konrad]
* Remove region suffix. [Konrad]
* Append digits to gcc node. [Konrad]
* Add ICC_TAGS instead of leaving it unspecified. [Konrad]
* Remove double space. [Konrad]
* Leave the size index of memory node untouched. [Konrad]
* Add pdc node and add tlmm wakeup parent. [Rajendra]
* Override the serial uart with "qcom,geni-debug-uart" in the board files. [Rajendra]
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 400 +++
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 3509 +++++++++++++++++++++
3 files changed, 3910 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..43bd9fcf35e5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -231,3 +231,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
new file mode 100644
index 000000000000..7e4d464e19e1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+ compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l4-supply = <&vreg_s4c_1p8>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vph_pwr>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vph_pwr>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <33 3>, <44 4>, /* SPI (TPM) */
+ <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
new file mode 100644
index 000000000000..05869dc0779d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -0,0 +1,3509 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <76800000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ bi_tcxo_div2: bi-tcxo-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+
+ L2_0: l2-cache-0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU4: cpu@10000 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10000>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+
+ L2_1: l2-cache-1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ CPU5: cpu@10100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU6: cpu@10200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU7: cpu@10300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU8: cpu@20000 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20000>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD8>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+
+ L2_2: l2-cache-2 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ CPU9: cpu@20100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD9>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU10: cpu@20200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD10>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU11: cpu@20300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD11>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+
+ core1 {
+ cpu = <&CPU9>;
+ };
+
+ core2 {
+ cpu = <&CPU10>;
+ };
+
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CLUSTER_C4: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "ret";
+ arm,psci-suspend-param = <0x00000004>;
+ entry-latency-us = <180>;
+ exit-latency-us = <320>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_CL4: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "l2-ret";
+ arm,psci-suspend-param = <0x01000044>;
+ entry-latency-us = <350>;
+ exit-latency-us = <500>;
+ min-residency-us = <2500>;
+ };
+
+ CLUSTER_CL5: cluster-sleep-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "ret-pll-off";
+ arm,psci-suspend-param = <0x01000054>;
+ entry-latency-us = <2200>;
+ exit-latency-us = <2500>;
+ min-residency-us = <7000>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-x1e80100", "qcom,scm";
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ };
+ };
+
+ clk_virt: interconnect-0 {
+ compatible = "qcom,x1e80100-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,x1e80100-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD4: power-domain-cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD5: power-domain-cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD6: power-domain-cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD7: power-domain-cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD8: power-domain-cpu8 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD9: power-domain-cpu9 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD10: power-domain-cpu10 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CPU_PD11: power-domain-cpu11 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
+ CLUSTER_PD: power-domain-cpu-cluster {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gunyah_hyp_mem: gunyah-hyp@80000000 {
+ reg = <0x0 0x80000000 0x0 0x800000>;
+ no-map;
+ };
+
+ hyp_elf_package_mem: hyp-elf_package@80800000 {
+ reg = <0x0 0x80800000 0x0 0x200000>;
+ no-map;
+ };
+
+ ncc_mem: ncc@80a00000 {
+ reg = <0x0 0x80a00000 0x0 0x400000>;
+ no-map;
+ };
+
+ cpucp_log_mem: cpucp-log@80e00000 {
+ reg = <0x0 0x80e00000 0x0 0x40000>;
+ no-map;
+ };
+
+ cpucp_mem: cpucp@80e40000 {
+ reg = <0x0 0x80e40000 0x0 0x540000>;
+ no-map;
+ };
+
+ reserved-region@81380000 {
+ reg = <0x0 0x81380000 0x0 0x80000>;
+ no-map;
+ };
+
+ tags_mem: tags-region@81400000 {
+ reg = <0x0 0x81400000 0x0 0x1a0000>;
+ no-map;
+ };
+
+ xbl_dtlog_mem: xbl-dtlog@81a00000 {
+ reg = <0x0 0x81a00000 0x0 0x40000>;
+ no-map;
+ };
+
+ xbl_ramdump_mem: xbl-ramdump@81a40000 {
+ reg = <0x0 0x81a40000 0x0 0x1c0000>;
+ no-map;
+ };
+
+ aop_image_mem: aop-image@81c00000 {
+ reg = <0x0 0x81c00000 0x0 0x60000>;
+ no-map;
+ };
+
+ aop_cmd_db_mem: aop-cmd-db@81c60000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x81c60000 0x0 0x20000>;
+ no-map;
+ };
+
+ aop_config_mem: aop-config@81c80000 {
+ reg = <0x0 0x81c80000 0x0 0x20000>;
+ no-map;
+ };
+
+ tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+ reg = <0x0 0x81ca0000 0x0 0x40000>;
+ no-map;
+ };
+
+ tme_log_mem: tme-log@81ce0000 {
+ reg = <0x0 0x81ce0000 0x0 0x4000>;
+ no-map;
+ };
+
+ uefi_log_mem: uefi-log@81ce4000 {
+ reg = <0x0 0x81ce4000 0x0 0x10000>;
+ no-map;
+ };
+
+ secdata_apss_mem: secdata-apss@81cff000 {
+ reg = <0x0 0x81cff000 0x0 0x1000>;
+ no-map;
+ };
+
+ pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+ reg = <0x0 0x81e00000 0x0 0x100000>;
+ no-map;
+ };
+
+ gpu_prr_mem: gpu-prr@81f00000 {
+ reg = <0x0 0x81f00000 0x0 0x10000>;
+ no-map;
+ };
+
+ tpm_control_mem: tpm-control@81f10000 {
+ reg = <0x0 0x81f10000 0x0 0x10000>;
+ no-map;
+ };
+
+ usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+ reg = <0x0 0x81f20000 0x0 0x10000>;
+ no-map;
+ };
+
+ pld_pep_mem: pld-pep@81f30000 {
+ reg = <0x0 0x81f30000 0x0 0x6000>;
+ no-map;
+ };
+
+ pld_gmu_mem: pld-gmu@81f36000 {
+ reg = <0x0 0x81f36000 0x0 0x1000>;
+ no-map;
+ };
+
+ pld_pdp_mem: pld-pdp@81f37000 {
+ reg = <0x0 0x81f37000 0x0 0x1000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@82700000 {
+ reg = <0x0 0x82700000 0x0 0x100000>;
+ no-map;
+ };
+
+ xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+ reg = <0x0 0x82800000 0x0 0xc00000>;
+ no-map;
+ };
+
+ adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+ reg = <0x0 0x84b00000 0x0 0x800000>;
+ no-map;
+ };
+
+ spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+ reg = <0x0 0x85300000 0x0 0x80000>;
+ no-map;
+ };
+
+ adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+ reg = <0x0 0x866c0000 0x0 0x40000>;
+ no-map;
+ };
+
+ spss_region_mem: spss-region@86700000 {
+ reg = <0x0 0x86700000 0x0 0x400000>;
+ no-map;
+ };
+
+ adsp_boot_mem: adsp-boot@86b00000 {
+ reg = <0x0 0x86b00000 0x0 0xc00000>;
+ no-map;
+ };
+
+ video_mem: video@87700000 {
+ reg = <0x0 0x87700000 0x0 0x700000>;
+ no-map;
+ };
+
+ adspslpi_mem: adspslpi@87e00000 {
+ reg = <0x0 0x87e00000 0x0 0x3a00000>;
+ no-map;
+ };
+
+ q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0x80000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@8b900000 {
+ reg = <0x0 0x8b900000 0x0 0x2000000>;
+ no-map;
+ };
+
+ q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+ reg = <0x0 0x8d900000 0x0 0x80000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@8d9fe000 {
+ reg = <0x0 0x8d9fe000 0x0 0x2000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@8da00000 {
+ reg = <0x0 0x8da00000 0x0 0x700000>;
+ no-map;
+ };
+
+ camera_mem: camera@8e100000 {
+ reg = <0x0 0x8e100000 0x0 0x800000>;
+ no-map;
+ };
+
+ av1_encoder_mem: av1-encoder@8e900000 {
+ reg = <0x0 0x8e900000 0x0 0x700000>;
+ no-map;
+ };
+
+ reserved-region@8f000000 {
+ reg = <0x0 0x8f000000 0x0 0xa00000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@8fa00000 {
+ reg = <0x0 0x8fa00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+ reg = <0x0 0x91300000 0x0 0x80000>;
+ no-map;
+ };
+
+ xbl_sc_mem: xbl-sc@d8000000 {
+ reg = <0x0 0xd8000000 0x0 0x40000>;
+ no-map;
+ };
+
+ reserved-region@d8040000 {
+ reg = <0x0 0xd8040000 0x0 0xa0000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@d80e0000 {
+ reg = <0x0 0xd80e0000 0x0 0x520000>;
+ no-map;
+ };
+
+ ta_mem: ta@d8600000 {
+ reg = <0x0 0xd8600000 0x0 0x8a00000>;
+ no-map;
+ };
+
+ tags_mem1: tags@e1000000 {
+ reg = <0x0 0xe1000000 0x0 0x26a0000>;
+ no-map;
+ };
+
+ llcc_lpi_mem: llcc-lpi@ff800000 {
+ reg = <0x0 0xff800000 0x0 0x600000>;
+ no-map;
+ };
+
+ smem_mem: smem@ffe00000 {
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ ranges = <0 0 0 0 0x10 0>;
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,x1e80100-gcc";
+ reg = <0 0x00100000 0 0x200000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
+
+ interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x436 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x423 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c16: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c16_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi16: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c17: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c17_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi17: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c18: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c18_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi18: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c19: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c19_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi19: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c20: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c20_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi20: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c21: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c21_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi21: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart21: serial@894000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart21_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c22: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c22_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi22: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c23: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c23_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi23: spi@89c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x136 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x123 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi13: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c14: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c14_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi14: spi@a98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c15: i2c@a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi15: spi@a9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma0: dma-controller@b00000 {
+ compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00b00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x456 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_0: geniqup@bc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00bc0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x443 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c0: i2c@b80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xb80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@b80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@b84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi1: spi@b84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@b88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@b88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xb88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@b8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi3: spi@b8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@b90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xb90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi4: spi@b90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c5: i2c@b94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi5: spi@b94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c6: i2c@b98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi6: spi@b98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c7: i2c@b9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi7: spi@b9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ cnoc_main: interconnect@1500000 {
+ compatible = "qcom,x1e80100-cnoc-main";
+ reg = <0 0x1500000 0 0x14400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ config_noc: interconnect@1600000 {
+ compatible = "qcom,x1e80100-cnoc-cfg";
+ reg = <0 0x1600000 0 0x6600>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,x1e80100-system-noc";
+ reg = <0 0x1680000 0 0x1c080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_south_anoc: interconnect@16c0000 {
+ compatible = "qcom,x1e80100-pcie-south-anoc";
+ reg = <0 0x16c0000 0 0xd080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_center_anoc: interconnect@16d0000 {
+ compatible = "qcom,x1e80100-pcie-center-anoc";
+ reg = <0 0x16d0000 0 0x7000>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,x1e80100-aggre1-noc";
+ reg = <0 0x16E0000 0 0x14400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,x1e80100-aggre2-noc";
+ reg = <0 0x1700000 0 0x1c400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_north_anoc: interconnect@1740000 {
+ compatible = "qcom,x1e80100-pcie-north-anoc";
+ reg = <0 0x1740000 0 0x9080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_center_anoc: interconnect@1750000 {
+ compatible = "qcom,x1e80100-usb-center-anoc";
+ reg = <0 0x1750000 0 0x8800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_north_anoc: interconnect@1760000 {
+ compatible = "qcom,x1e80100-usb-north-anoc";
+ reg = <0 0x1760000 0 0x7080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_south_anoc: interconnect@1770000 {
+ compatible = "qcom,x1e80100-usb-south-anoc";
+ reg = <0 0x1770000 0 0xf080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ mmss_noc: interconnect@1780000 {
+ compatible = "qcom,x1e80100-mmss-noc";
+ reg = <0 0x1780000 0 0x5B800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ gem_noc: interconnect@26400000 {
+ compatible = "qcom,x1e80100-gem-noc";
+ reg = <0 0x26400000 0 0x311200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ nsp_noc: interconnect@320c0000 {
+ compatible = "qcom,x1e80100-nsp-noc";
+ reg = <0 0x320C0000 0 0xE080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_ag_noc: interconnect@7e40000 {
+ compatible = "qcom,x1e80100-lpass-ag-noc";
+ reg = <0 0x7e40000 0 0xE080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_lpiaon_noc: interconnect@7400000 {
+ compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+ reg = <0 0x7400000 0 0x19080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_lpicx_noc: interconnect@7430000 {
+ compatible = "qcom,x1e80100-lpass-lpicx-noc";
+ reg = <0 0x7430000 0 0x3A200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+ qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+ <47 522 52>, <99 609 32>,
+ <131 717 12>, <143 816 19>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,x1e80100-tlmm";
+ reg = <0 0x0f100000 0 0xf00000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 239>;
+ wakeup-parent = <&pdc>;
+
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio0", "gpio1";
+ function = "qup0_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio4", "gpio5";
+ function = "qup0_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio8", "gpio9";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio12", "gpio13";
+ function = "qup0_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio16", "gpio17";
+ function = "qup0_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio20", "gpio21";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio24", "gpio25";
+ function = "qup0_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio14", "gpio15";
+ function = "qup0_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio32", "gpio33";
+ function = "qup1_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio36", "gpio37";
+ function = "qup1_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio40", "gpio41";
+ function = "qup1_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio44", "gpio45";
+ function = "qup1_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio52", "gpio53";
+ function = "qup1_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio56", "gpio57";
+ function = "qup1_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio54", "gpio55";
+ function = "qup1_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio64", "gpio65";
+ function = "qup2_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio68", "gpio69";
+ function = "qup2_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio72", "gpio73";
+ function = "qup2_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio76", "gpio77";
+ function = "qup2_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio80", "gpio81";
+ function = "qup2_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio84", "gpio85";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio88", "gpio89";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio86", "gpio87";
+ function = "qup2_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio3";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_cs: qup-spi1-cs-state {
+ pins = "gpio7";
+ function = "qup0_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio4", "gpio5", "gpio6";
+ function = "qup0_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio11";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_cs: qup-spi3-cs-state {
+ pins = "gpio15";
+ function = "qup0_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio12", "gpio13", "gpio14";
+ function = "qup0_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_cs: qup-spi4-cs-state {
+ pins = "gpio19";
+ function = "qup0_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio16", "gpio17", "gpio18";
+ function = "qup0_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_cs: qup-spi5-cs-state {
+ pins = "gpio23";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio27";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio24", "gpio25", "gpio26";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio13";
+ function = "qup0_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio14", "gpio15", "gpio12";
+ function = "qup0_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_cs: qup-spi8-cs-state {
+ pins = "gpio35";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio32", "gpio33", "gpio34";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_cs: qup-spi9-cs-state {
+ pins = "gpio39";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio36", "gpio37", "gpio38";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_cs: qup-spi10-cs-state {
+ pins = "gpio43";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio40", "gpio41", "gpio42";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_cs: qup-spi11-cs-state {
+ pins = "gpio47";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio44", "gpio45", "gpio46";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_cs: qup-spi12-cs-state {
+ pins = "gpio51";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio48", "gpio49", "gpio50";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_cs: qup-spi13-cs-state {
+ pins = "gpio55";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_cs: qup-spi14-cs-state {
+ pins = "gpio59";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio56", "gpio57", "gpio58";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi15_cs: qup-spi15-cs-state {
+ pins = "gpio53";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi15_data_clk: qup-spi15-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio54", "gpio55", "gpio52";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi16_cs: qup-spi16-cs-state {
+ pins = "gpio67";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi16_data_clk: qup-spi16-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio64", "gpio65", "gpio66";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi17_cs: qup-spi17-cs-state {
+ pins = "gpio71";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi17_data_clk: qup-spi17-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio68", "gpio69", "gpio70";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_cs: qup-spi18-cs-state {
+ pins = "gpio75";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_data_clk: qup-spi18-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio72", "gpio73", "gpio74";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_cs: qup-spi19-cs-state {
+ pins = "gpio79";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_data_clk: qup-spi19-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio76", "gpio77", "gpio78";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_cs: qup-spi20-cs-state {
+ pins = "gpio83";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_data_clk: qup-spi20-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio80", "gpio81", "gpio82";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi21_cs: qup-spi21-cs-state {
+ pins = "gpio87";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi21_data_clk: qup-spi21-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio84", "gpio85", "gpio86";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi22_cs: qup-spi22-cs-state {
+ pins = "gpio91";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi22_data_clk: qup-spi22-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio88", "gpio89", "gpio90";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi23_cs: qup-spi23-cs-state {
+ pins = "gpio85";
+ function = "qup2_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi23_data_clk: qup-spi23-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio86", "gpio87", "gpio84";
+ function = "qup2_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_uart21_default: qup-uart21-default-state {
+ /* TX, RX */
+ pins = "gpio86", "gpio87";
+ function = "qup2_se5";
+ drive-strength= <2>;
+ bias-disable;
+ };
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ };
+
+ intc: interrupt-controller@17000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x17000000 0 0x10000>, /* GICD */
+ <0 0x17080000 0 0x480000>; /* GICR * 12 */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ #interrupt-cells = <3>;
+ interrupt-controller;
+
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@17040000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0 0x17040000 0 0x40000>;
+
+ msi-controller;
+ #msi-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17500000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0 0x17500000 0 0x10000>,
+ <0 0x17510000 0 0x10000>,
+ <0 0x17520000 0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ qcom,drv-count = <3>;
+
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 0>;
+
+ label = "apps_rsc";
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,x1e80100-rpmh-clk";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ #clock-cells = <1>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,x1e80100-rpmhpd";
+
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ #power-domain-cells = <1>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp-16 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp-48 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_d2: opp-52 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+
+ rpmhpd_opp_low_svs_d1: opp-56 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ rpmhpd_opp_low_svs_d0: opp-60 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ rpmhpd_opp_low_svs: opp-64 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_l1: opp-80 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs: opp-128 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l0: opp-144 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ rpmhpd_opp_svs_l1: opp-192 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp-256 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp-320 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp-336 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp-384 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp-416 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ timer@17800000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0 0x17800000 0 0x1000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ frame@17801000 {
+ reg = <0 0x17801000 0 0x1000>,
+ <0 0x17802000 0 0x1000>;
+
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <0>;
+ };
+
+ frame@17803000 {
+ reg = <0 0x17803000 0 0x1000>;
+
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <1>;
+
+ status = "disabled";
+ };
+
+ frame@17805000 {
+ reg = <0 0x17805000 0 0x1000>;
+
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <2>;
+
+ status = "disabled";
+ };
+
+ frame@17807000 {
+ reg = <0 0x17807000 0 0x1000>;
+
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <3>;
+
+ status = "disabled";
+ };
+
+ frame@17809000 {
+ reg = <0 0x17809000 0 0x1000>;
+
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <4>;
+
+ status = "disabled";
+ };
+
+ frame@1780b000 {
+ reg = <0 0x1780b000 0 0x1000>;
+
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <5>;
+
+ status = "disabled";
+ };
+
+ frame@1780d000 {
+ reg = <0 0x1780d000 0 0x1000>;
+
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <6>;
+
+ status = "disabled";
+ };
+ };
+
+ system-cache-controller@25000000 {
+ compatible = "qcom,x1e80100-llcc";
+ reg = <0 0x25000000 0 0x200000>,
+ <0 0x25200000 0 0x200000>,
+ <0 0x25400000 0 0x200000>,
+ <0 0x25600000 0 0x200000>,
+ <0 0x25800000 0 0x200000>,
+ <0 0x25a00000 0 0x200000>,
+ <0 0x25c00000 0 0x200000>,
+ <0 0x25e00000 0 0x200000>,
+ <0 0x26000000 0 0x200000>;
+ reg-names = "llcc0_base",
+ "llcc1_base",
+ "llcc2_base",
+ "llcc3_base",
+ "llcc4_base",
+ "llcc5_base",
+ "llcc6_base",
+ "llcc7_base",
+ "llcc_broadcast_base";
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--
2.17.1
On 17.11.2023 12:39, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
> X1E80100 SoC, describing the CPUs, GCC and RPMHCC clock controllers,
> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
> SMMU and LLCC nodes.
>
> Co-developed-by: Abel Vesa <[email protected]>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Co-developed-by: Sibi Sankar <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
[...]
> +&tlmm {
> + gpio-reserved-ranges = <33 3>, <44 4>, /* SPI (TPM) */
Surely SPI doesn't use 7 wires! :D
[...]
> + L2_0: l2-cache-0 {
the cache device is distinguishable by its parent, so "l2-cache" is enough
> + compatible = "cache";
> + cache-level = <2>;
> + cache-unified;
> + };
> + };
> +
[...]
> + idle-states {
> + entry-method = "psci";
> +
> + CLUSTER_C4: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "ret";
> + arm,psci-suspend-param = <0x00000004>;
These suspend parameters look funky.. is this just a PSCI sleep
implementation that strays far away from Arm's suggested guidelines?
[...]
> + CPU_PD11: power-domain-cpu11 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + };
> +
> + CLUSTER_PD: power-domain-cpu-cluster {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
> + };
So, can the 3 clusters not shut down their L2 and PLLs (if separate?)
on their own?
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gunyah_hyp_mem: gunyah-hyp@80000000 {
> + reg = <0x0 0x80000000 0x0 0x800000>;
> + no-map;
> + };
> +
> + hyp_elf_package_mem: hyp-elf_package@80800000 {
no underscores in node names, use hyphens
The rest looks OK I think
Konrad
On 17.11.2023 12:39, Sibi Sankar wrote:
> Add basic support for X1E80100 CRD board dts, which allows it to boot
> to a shell.
>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
pretty much just the same question about pins <34 2>
otherwise
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On Fri, Nov 17, 2023 at 05:09:27PM +0530, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> These are the CPU cores in Qualcomm's X1E80100 SoC.
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
>
> v2:
> * Update the part number from sc8380xp to x1e80100.
>
> Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index ffd526363fda..cc5a21b47e26 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -198,6 +198,7 @@ properties:
> - qcom,kryo660
> - qcom,kryo685
> - qcom,kryo780
> + - qcom,oryon
Wasn't it previously said 'oryon' is not specific enough?
Also, please describe what oryon is in the commit msg.
Rob
Hey Rob,
Thanks for taking time to review the series.
On 11/19/23 21:29, Rob Herring wrote:
> On Fri, Nov 17, 2023 at 05:09:27PM +0530, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> These are the CPU cores in Qualcomm's X1E80100 SoC.
>>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
>>
>> v2:
>> * Update the part number from sc8380xp to x1e80100.
>>
>> Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
>> index ffd526363fda..cc5a21b47e26 100644
>> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
>> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
>> @@ -198,6 +198,7 @@ properties:
>> - qcom,kryo660
>> - qcom,kryo685
>> - qcom,kryo780
>> + - qcom,oryon
>
> Wasn't it previously said 'oryon' is not specific enough?
>
> Also, please describe what oryon is in the commit msg.
ack. Will add more details in the next re-spin.
-Sibi
>
> Rob
Hey Konrad,
Thanks for taking time to review the series.
On 11/18/23 06:37, Konrad Dybcio wrote:
> On 17.11.2023 12:39, Sibi Sankar wrote:
>> Add basic support for X1E80100 CRD board dts, which allows it to boot
>> to a shell.
>>
>> Signed-off-by: Abel Vesa <[email protected]>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
> pretty much just the same question about pins <34 2>
The reference docs mark it that way, it probably includes some
redundancies (given that on of those is marked as non-secure
and used in touch screen for the CRD). Anyway let me confirm
the same.
-Sibi
>
> otherwise
>
> Reviewed-by: Konrad Dybcio <[email protected]>
>
> Konrad
On 23-11-17 17:09:30, Sibi Sankar wrote:
> Add basic support for X1E80100 CRD board dts, which allows it to boot
> to a shell.
>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
You dropped the initial authorship here. Please fix and re-send.
Thanks,
Abel
>
> v2:
> * Update the part number from sc8380xp to x1e80100.
> * Override the serial uart with "qcom,geni-debug-uart" in the board files. [Rajendra]
> * Document reserved gpios. [Konrad]
>
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 425 ++++++++++++++++++++++
> 2 files changed, 426 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-crd.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 43bd9fcf35e5..e3ab1c91307a 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -231,4 +231,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> new file mode 100644
> index 000000000000..82d1ecac0ec9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -0,0 +1,425 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "x1e80100.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. X1E80100 CRD";
> + compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
> +
> + aliases {
> + serial0 = &uart21;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vreg_edp_3p3: regulator-edp-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_EDP_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&edp_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8550-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + vdd-l1-supply = <&vreg_s4c_1p8>;
> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> + vdd-l4-supply = <&vreg_s4c_1p8>;
> + vdd-l5-l16-supply = <&vreg_bob1>;
> + vdd-l6-l7-supply = <&vreg_bob2>;
> + vdd-l8-l9-supply = <&vreg_bob1>;
> + vdd-l10-supply = <&vreg_s4c_1p8>;
> + vdd-l12-supply = <&vreg_s5j_1p2>;
> + vdd-l15-supply = <&vreg_s4c_1p8>;
> + vdd-l17-supply = <&vreg_bob2>;
> +
> + vreg_bob1: bob1 {
> + regulator-name = "vreg_bob1";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob2: bob2 {
> + regulator-name = "vreg_bob2";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1b_1p8: ldo1 {
> + regulator-name = "vreg_l1b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p0: ldo2 {
> + regulator-name = "vreg_l2b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4b_1p8: ldo4 {
> + regulator-name = "vreg_l4b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5b_3p0: ldo5 {
> + regulator-name = "vreg_l5b_3p0";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p8: ldo6 {
> + regulator-name = "vreg_l6b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p8: ldo7 {
> + regulator-name = "vreg_l7b_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_3p0: ldo8 {
> + regulator-name = "vreg_l8b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_2p9: ldo9 {
> + regulator-name = "vreg_l9b_2p9";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10b_1p8: ldo10 {
> + regulator-name = "vreg_l10b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_1p2: ldo12 {
> + regulator-name = "vreg_l12b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_3p0: ldo13 {
> + regulator-name = "vreg_l13b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_3p0: ldo14 {
> + regulator-name = "vreg_l14b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_1p8: ldo15 {
> + regulator-name = "vreg_l15b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_2p9: ldo16 {
> + regulator-name = "vreg_l16b_2p9";
> + regulator-min-microvolt = <2912000>;
> + regulator-max-microvolt = <2912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_2p5: ldo17 {
> + regulator-name = "vreg_l17b_2p5";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-l1-supply = <&vreg_s5j_1p2>;
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s4-supply = <&vph_pwr>;
> +
> + vreg_s4c_1p8: smps4 {
> + regulator-name = "vreg_s4c_1p8";
> + regulator-min-microvolt = <1856000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1c_1p2: ldo1 {
> + regulator-name = "vreg_l1c_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_0p8: ldo2 {
> + regulator-name = "vreg_l2c_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_0p8: ldo3 {
> + regulator-name = "vreg_l3c_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-2 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + vdd-l1-supply = <&vreg_s1f_0p7>;
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s4c_1p8>;
> + vdd-s1-supply = <&vph_pwr>;
> +
> + vreg_l1d_0p8: ldo1 {
> + regulator-name = "vreg_l1d_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2d_0p9: ldo2 {
> + regulator-name = "vreg_l2d_0p9";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3d_1p8: ldo3 {
> + regulator-name = "vreg_l3d_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-3 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s5j_1p2>;
> +
> + vreg_l2e_0p8: ldo2 {
> + regulator-name = "vreg_l2e_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3e_1p2: ldo3 {
> + regulator-name = "vreg_l3e_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-4 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + vdd-l1-supply = <&vreg_s5j_1p2>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s5j_1p2>;
> + vdd-s1-supply = <&vph_pwr>;
> +
> + vreg_s1f_0p7: smps1 {
> + regulator-name = "vreg_s1f_0p7";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1f_1p0: ldo1 {
> + regulator-name = "vreg_l1f_1p0";
> + regulator-min-microvolt = <1024000>;
> + regulator-max-microvolt = <1024000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2f_1p0: ldo2 {
> + regulator-name = "vreg_l2f_1p0";
> + regulator-min-microvolt = <1024000>;
> + regulator-max-microvolt = <1024000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3f_1p0: ldo3 {
> + regulator-name = "vreg_l3f_1p0";
> + regulator-min-microvolt = <1024000>;
> + regulator-max-microvolt = <1024000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-6 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "i";
> +
> + vdd-l1-supply = <&vreg_s4c_1p8>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> +
> + vreg_s1i_0p9: smps1 {
> + regulator-name = "vreg_s1i_0p9";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s2i_1p0: smps2 {
> + regulator-name = "vreg_s2i_1p0";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1i_1p8: ldo1 {
> + regulator-name = "vreg_l1i_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2i_1p2: ldo2 {
> + regulator-name = "vreg_l2i_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3i_0p8: ldo3 {
> + regulator-name = "vreg_l3i_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-7 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "j";
> +
> + vdd-l1-supply = <&vreg_s1f_0p7>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s5-supply = <&vph_pwr>;
> +
> + vreg_s5j_1p2: smps5 {
> + regulator-name = "vreg_s5j_1p2";
> + regulator-min-microvolt = <1256000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1j_0p8: ldo1 {
> + regulator-name = "vreg_l1j_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2j_1p2: ldo2 {
> + regulator-name = "vreg_l2j_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3j_0p8: ldo3 {
> + regulator-name = "vreg_l3j_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&qupv3_2 {
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <34 2>, <44 4>, /* SPI (TPM) */
> + <238 1>; /* UFS Reset */
> +
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio70";
> + function = "gpio";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +};
> +
> +&uart21 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> +};
> --
> 2.17.1
>
On 17/11/2023 12:39, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Document the X1E80100 SoC binding and also the boards using it.
> Also document the new board id qcp (Qualcomm Compute Platform).
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Co-developed-by: Sibi Sankar <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 17/11/2023 12:39, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Enable GCC, Pinctrl and Interconnect configs for Qualcomm's X1E80100 SoC
> which is required to boot X1E80100 QCP/CRD boards to a console shell. The
> configs are required to be marked as builtin and not modules due to the
> console driver dependencies.
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Co-developed-by: Sibi Sankar <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
>
> v2:
> * Update the part number from sc8380xp to x1e80100.
> * Add additional details to patch 5 commit message. [Konrad/Krzysztof]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 20.11.2023 07:51, Sibi Sankar wrote:
> Hey Konrad,
> Thanks for taking time to review the series.
While it's rude to complain about somebody saying kind things, I have to
do it :D
top-posting (replying at the beginning of email) is discouraged and will
earn you grumpy replies, see the beginning of this message from GK-H:
https://lore.kernel.org/linux-nfs/YH%2FfM%[email protected]/
Konrad
Hi Sibi,
kernel test robot noticed the following build errors:
[auto build test ERROR on v6.7-rc1]
[also build test ERROR on linus/master next-20231121]
[cannot apply to robh/for-next arm64/for-next/core]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Sibi-Sankar/dt-bindings-arm-cpus-Add-qcom-oryon-compatible/20231117-194253
base: v6.7-rc1
patch link: https://lore.kernel.org/r/20231117113931.26660-4-quic_sibis%40quicinc.com
patch subject: [PATCH V2 3/5] arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20231121/[email protected]/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231121/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from arch/arm64/boot/dts/qcom/x1e80100-qcp.dts:10:
>> arch/arm64/boot/dts/qcom/x1e80100.dtsi:7:10: fatal error: dt-bindings/clock/qcom,x1e80100-gcc.h: No such file or directory
7 | #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
vim +7 arch/arm64/boot/dts/qcom/x1e80100.dtsi
> 7 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
8 #include <dt-bindings/dma/qcom-gpi.h>
9 #include <dt-bindings/interconnect/qcom,icc.h>
10 #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/power/qcom,rpmhpd.h>
13 #include <dt-bindings/power/qcom-rpmpd.h>
14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
15
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Hi Sibi,
kernel test robot noticed the following build errors:
[auto build test ERROR on v6.7-rc1]
[also build test ERROR on linus/master next-20231121]
[cannot apply to robh/for-next arm64/for-next/core]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Sibi-Sankar/dt-bindings-arm-cpus-Add-qcom-oryon-compatible/20231117-194253
base: v6.7-rc1
patch link: https://lore.kernel.org/r/20231117113931.26660-4-quic_sibis%40quicinc.com
patch subject: [PATCH V2 3/5] arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts
config: arm64-allmodconfig (https://download.01.org/0day-ci/archive/20231121/[email protected]/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231121/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from arch/arm64/boot/dts/qcom/x1e80100-qcp.dts:10:
>> arch/arm64/boot/dts/qcom/x1e80100.dtsi:7:10: fatal error: 'dt-bindings/clock/qcom,x1e80100-gcc.h' file not found
7 | #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
vim +7 arch/arm64/boot/dts/qcom/x1e80100.dtsi
> 7 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
8 #include <dt-bindings/dma/qcom-gpi.h>
9 #include <dt-bindings/interconnect/qcom,icc.h>
10 #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/power/qcom,rpmhpd.h>
13 #include <dt-bindings/power/qcom-rpmpd.h>
14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
15
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On 11/18/23 06:36, Konrad Dybcio wrote:
> On 17.11.2023 12:39, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
>> X1E80100 SoC, describing the CPUs, GCC and RPMHCC clock controllers,
>> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
>> SMMU and LLCC nodes.
>>
>> Co-developed-by: Abel Vesa <[email protected]>
>> Signed-off-by: Abel Vesa <[email protected]>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Co-developed-by: Sibi Sankar <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
> [...]
>
>> +&tlmm {
>> + gpio-reserved-ranges = <33 3>, <44 4>, /* SPI (TPM) */
> Surely SPI doesn't use 7 wires! :D
yeah, they are just secure reserved unused gpios.
>
> [...]
>
>> + L2_0: l2-cache-0 {
> the cache device is distinguishable by its parent, so "l2-cache" is enough
thanks will fix ^^
>
>
>> + compatible = "cache";
>> + cache-level = <2>;
>> + cache-unified;
>> + };
>> + };
>> +
> [...]
>
>> + idle-states {
>> + entry-method = "psci";
>> +
>> + CLUSTER_C4: cpu-sleep-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "ret";
>> + arm,psci-suspend-param = <0x00000004>;
> These suspend parameters look funky.. is this just a PSCI sleep
> implementation that strays far away from Arm's suggested guidelines?
not really! it's just that 30th bit is set according to spec i.e
it's marked as a retention state.
>
> [...]
>
>
>> + CPU_PD11: power-domain-cpu11 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + };
>> +
>> + CLUSTER_PD: power-domain-cpu-cluster {
>> + #power-domain-cells = <0>;
>> + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
>> + };
> So, can the 3 clusters not shut down their L2 and PLLs (if separate?)
> on their own?
on CL5 the clusters are expected to shutdown their l2 and PLL on their
own.
>
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + gunyah_hyp_mem: gunyah-hyp@80000000 {
>> + reg = <0x0 0x80000000 0x0 0x800000>;
>> + no-map;
>> + };
>> +
>> + hyp_elf_package_mem: hyp-elf_package@80800000 {
> no underscores in node names, use hyphens
ack
-Sibi
>
> The rest looks OK I think
>
> Konrad
On 11/20/23 12:14, Sibi Sankar wrote:
> Hey Rob,
>
> Thanks for taking time to review the series.
>
> On 11/19/23 21:29, Rob Herring wrote:
>> On Fri, Nov 17, 2023 at 05:09:27PM +0530, Sibi Sankar wrote:
>>> From: Rajendra Nayak <[email protected]>
>>>
>>> These are the CPU cores in Qualcomm's X1E80100 SoC.
>>>
>>> Signed-off-by: Rajendra Nayak <[email protected]>
>>> Signed-off-by: Sibi Sankar <[email protected]>
>>> ---
>>>
>>> v2:
>>> * Update the part number from sc8380xp to x1e80100.
>>>
>>> Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml
>>> b/Documentation/devicetree/bindings/arm/cpus.yaml
>>> index ffd526363fda..cc5a21b47e26 100644
>>> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
>>> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
>>> @@ -198,6 +198,7 @@ properties:
>>> - qcom,kryo660
>>> - qcom,kryo685
>>> - qcom,kryo780
>>> + - qcom,oryon
>>
>> Wasn't it previously said 'oryon' is not specific enough?
https://lore.kernel.org/lkml/[email protected]/
The cpu part numbers were indeed different in engineering samples
which has now been fixed in the production version.
-Sibi
>>
>> Also, please describe what oryon is in the commit msg.
>
> ack. Will add more details in the next re-spin.
>
> -Sibi
>
>>
>> Rob