From: Elad Nachman <[email protected]>
Add support for CN9130 and CN9131 COM Express Type 7 CPU
module boards by Marvell.
Define these COM Express CPU modules as dtsi and
provide a dtsi file for a carrier board (Marvell AC5X RD
COM Express type 7 carrier board).
This Carrier board only utilizes the PCIe link, hence no
special device / driver support is provided by this dtsi file.
Finally, provide a dts file for the com express carrier and
CPU module combination.
These COM Express boards differ from the existing CN913x DB
boards by the type of ethernet connection (RGMII),
the type of voltage regulators (not i2c expander based)
and the USB phy (not UTMI based).
Note - PHY + RGMII connector is OOB on CPU module.
CN9131 COM Express board is basically CN9130 COM Express board
with an additional CP115 I/O co-processor, which in this case
provides an additional USB host controller on the board.
Signed-off-by: Elad Nachman <[email protected]>
---
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../marvell/ac5x-rd-carrier-with-cn9131.dts | 25 ++++
.../boot/dts/marvell/ac5x-rd-carrier.dtsi | 14 +++
.../dts/marvell/cn9130-db-comexpress.dtsi | 96 ++++++++++++++++
.../dts/marvell/cn9131-db-comexpress.dtsi | 108 ++++++++++++++++++
5 files changed, 244 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier-with-cn9131.dts
create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..88c0f357a778 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-with-cn9131.dtb
dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-with-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-with-cn9131.dts
new file mode 100644
index 000000000000..9ca8af11ac87
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-with-cn9131.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific board only maintains a PCIe link with the CPU CPU module
+ * module, which does not require any special DTS definitions.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+ model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+ compatible = "marvell,ac5x-car-with-cn9131", "marvell,rd-ac5x-carrier",
+ "marvell,cn9131-cpu-module", "marvell,cn9131",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x2 0x00000000>;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 000000000000..fd45d5582233
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board only maintains a PCIe link with the CPU CPU module
+ * module, which does not require any special DTS definitions.
+ */
+
+/ {
+ model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+ compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000000..028496ebc473
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+ compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+ regulator-max-microvolt = <1800000>;
+ states = <1800000 0x1 1800000 0x0>;
+ /delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+ status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+ status = "disabled";
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_eth0 {
+ status = "disabled";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ status = "disabled";
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ phy0: ethernet-phy@0 {
+ status = "okay";
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+ };
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_spi1 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000000..6f3914bcfd01
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+ compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+ regulator-max-microvolt = <1800000>;
+ states = <1800000 0x1 1800000 0x0>;
+ /delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+ /delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+ status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+ status = "disabled";
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_eth0 {
+ status = "disabled";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ status = "disabled";
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ phy0: ethernet-phy@0 {
+ status = "okay";
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+ };
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_spi1 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp1_usb3_0_phy0>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy3 1>;
+ phy-names = "usb";
+};
--
2.25.1