This patchset adds some missing register offsets for the v6 and v6.20,
as well as the new v7 ones. These register offsets are used by the
new Qualcomm Snapdragon X Elite (X1E80100) platform.
Signed-off-by: Abel Vesa <[email protected]>
---
Changes in v2:
- added Dmitry's R-b tag to patches no. 1, 2 and 6
- dropped the duplicates of PCS v7 offsets from USB PCS v7 header, like Dmitry suggested
- fixed comment to suggest v7 (instead of v6) in qserdes com v7 and pcs
v7 header files, like Dmitry suggested
- renamed PCS v7 RX_CONFIG to CDR_RESET_TIME, which is the correct name
- dropped the "_USB" substring from the include guard of phy-qcom-qmp-qserdes-txrx-v7.h
- reordered the SO_GAIN_RATE_2 offset in the phy-qcom-qmp-qserdes-txrx-v6_20.h
- Link to v1: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v1-0-d9340d362664@linaro.org
---
Abel Vesa (7):
phy: qcom-qmp: qserdes-com: Add some more v6 register offsets
phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets
phy: qcom-qmp: pcs: Add v7 register offsets
phy: qcom-qmp: pcs-usb: Add v7 register offsets
phy: qcom-qmp: qserdes-com: Add v7 register offsets
phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets
phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h | 15 ++++
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h | 28 +++++++
drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 5 ++
drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v7.h | 86 ++++++++++++++++++++++
.../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h | 1 +
.../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h | 4 +
.../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h | 51 +++++++++++++
.../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h | 78 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 6 ++
9 files changed, 274 insertions(+)
---
base-commit: 629a3b49f3f957e975253c54846090b8d5ed2e9b
change-id: 20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-5ed528c88f62
Best regards,
--
Abel Vesa <[email protected]>
Add some missing V6 registers offsets that are needed by the new
Snapdragon X Elite (X1E80100) platform.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 5 +++++
drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
index f420f8faf16a..ec7291424dd1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
@@ -22,6 +22,8 @@
#define QSERDES_V6_COM_DIV_FRAC_START2_MODE1 0x34
#define QSERDES_V6_COM_DIV_FRAC_START3_MODE1 0x38
#define QSERDES_V6_COM_HSCLK_SEL_1 0x3c
+#define QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE1 0x40
+#define QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE1 0x44
#define QSERDES_V6_COM_VCO_TUNE1_MODE1 0x48
#define QSERDES_V6_COM_VCO_TUNE2_MODE1 0x4c
#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x50
@@ -48,6 +50,7 @@
#define QSERDES_V6_COM_VCO_TUNE2_MODE0 0xac
#define QSERDES_V6_COM_BG_TIMER 0xbc
#define QSERDES_V6_COM_SSC_EN_CENTER 0xc0
+#define QSERDES_V6_COM_SSC_ADJ_PER1 0xc4
#define QSERDES_V6_COM_SSC_PER1 0xcc
#define QSERDES_V6_COM_SSC_PER2 0xd0
#define QSERDES_V6_COM_PLL_POST_DIV_MUX 0xd8
@@ -56,6 +59,7 @@
#define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4
#define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8
#define QSERDES_V6_COM_PLL_IVCO 0xf4
+#define QSERDES_V6_COM_PLL_IVCO_MODE1 0xf8
#define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110
#define QSERDES_V6_COM_RESETSM_CNTRL 0x118
#define QSERDES_V6_COM_LOCK_CMP_EN 0x120
@@ -63,6 +67,7 @@
#define QSERDES_V6_COM_VCO_TUNE_CTRL 0x13c
#define QSERDES_V6_COM_VCO_TUNE_MAP 0x140
#define QSERDES_V6_COM_VCO_TUNE_INITVAL2 0x148
+#define QSERDES_V6_COM_VCO_TUNE_MAXVAL2 0x158
#define QSERDES_V6_COM_CLK_SELECT 0x164
#define QSERDES_V6_COM_CORE_CLK_EN 0x170
#define QSERDES_V6_COM_CMN_CONFIG_1 0x174
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h
index 8883e1de730e..23ffcfae9efa 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h
@@ -23,6 +23,7 @@
#define QSERDES_V6_TX_PARRATE_REC_DETECT_IDLE_EN 0x60
#define QSERDES_V6_TX_BIST_PATTERN7 0x7c
#define QSERDES_V6_TX_LANE_MODE_1 0x84
+#define QSERDES_V6_TX_LANE_MODE_2 0x88
#define QSERDES_V6_TX_LANE_MODE_3 0x8c
#define QSERDES_V6_TX_LANE_MODE_4 0x90
#define QSERDES_V6_TX_LANE_MODE_5 0x94
--
2.34.1
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB,
and PCIe. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h | 28 ++++++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++
2 files changed, 30 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h
new file mode 100644
index 000000000000..1967cfe595b5
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V7_H_
+#define QCOM_PHY_QMP_PCS_V7_H_
+
+/* Only for QMP V7 PHY - USB/PCIe PCS registers */
+
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG1 0xc4
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG2 0xc8
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG3 0xcc
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG6 0xd8
+#define QPHY_V7_PCS_REFGEN_REQ_CONFIG1 0xdc
+#define QPHY_V7_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
+#define QPHY_V7_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V7_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG2 0x1c4
+#define QPHY_V7_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_V7_PCS_EQ_CONFIG1 0x1dc
+#define QPHY_V7_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V7_PCS_EQ_CONFIG5 0x1ec
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 71f063f4a56e..21f6a56e7ae3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -44,6 +44,8 @@
#include "phy-qcom-qmp-pcs-v6_20.h"
+#include "phy-qcom-qmp-pcs-v7.h"
+
/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
--
2.34.1
Add some missing v6.20 registers offsets that are needed by the new
Snapdragon X Elite (X1E80100) platform.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
index 5385a8b60970..6ed5339fd2ea 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -15,10 +15,13 @@
#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08
#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c
+#define QSERDES_V6_20_RX_UCDR_SO_GAIN_RATE_2 0x18
#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20
#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34
#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c
#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0
+#define QSERDES_V6_20_RX_DFE_1 0xac
+#define QSERDES_V6_20_RX_DFE_2 0xb0
#define QSERDES_V6_20_RX_DFE_3 0xb4
#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8
#define QSERDES_V6_20_RX_GM_CAL 0x10c
@@ -41,5 +44,6 @@
#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220
#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224
#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228
+#define QSERDES_V6_20_RX_BKUP_CTRL1 0x22c
#endif
--
2.34.1
There is a variant of V6 offsets that are different, the QMP PHY N4,
and it is found on the X1E80100 platform.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
---
.../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h | 51 ++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 52 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
new file mode 100644
index 000000000000..a814ad11af07
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+
+#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX 0x30
+#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_V6_N4_TX_LANE_MODE_1 0x78
+#define QSERDES_V6_N4_TX_LANE_MODE_2 0x7c
+#define QSERDES_V6_N4_TX_LANE_MODE_3 0x80
+
+#define QSERDES_V6_N4_RX_UCDR_FO_GAIN_RATE2 0x8
+#define QSERDES_V6_N4_RX_UCDR_SO_GAIN_RATE2 0x18
+#define QSERDES_V6_N4_RX_UCDR_PI_CONTROLS 0x20
+#define QSERDES_V6_N4_RX_IVCM_CAL_CODE_OVERRIDE 0x94
+#define QSERDES_V6_N4_RX_RX_IVCM_CAL_CTRL2 0x9c
+#define QSERDES_V6_N4_RX_RX_IVCM_POSTCAL_OFFSET 0xa0
+#define QSERDES_V6_N4_RX_DFE_3 0xb4
+#define QSERDES_V6_N4_RX_VGA_CAL_CNTRL1 0xe0
+#define QSERDES_V6_N4_RX_VGA_CAL_MAN_VAL 0xe8
+#define QSERDES_V6_N4_RX_GM_CAL 0x10c
+#define QSERDES_V6_N4_RX_SIGDET_ENABLES 0x148
+#define QSERDES_V6_N4_RX_SIGDET_CNTRL 0x14c
+#define QSERDES_V6_N4_RX_SIGDET_DEGLITCH_CNTRL 0x154
+#define QSERDES_V6_N4_RX_DFE_CTLE_POST_CAL_OFFSET 0x194
+#define QSERDES_V6_N4_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc
+#define QSERDES_V6_N4_RX_UCDR_PI_CTRL1 0x23c
+#define QSERDES_V6_N4_RX_UCDR_PI_CTRL2 0x240
+#define QSERDES_V6_N4_RX_UCDR_SB2_GAIN2_RATE2 0x27c
+#define QSERDES_V6_N4_RX_DFE_DAC_ENABLE1 0x298
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B0 0x2b8
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B1 0x2bc
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B2 0x2c0
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B3 0x2c4
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B4 0x2c8
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B5 0x2cc
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B6 0x2d0
+#define QSERDES_V6_N4_RX_MODE_RATE2_B0 0x2d4
+#define QSERDES_V6_N4_RX_MODE_RATE2_B1 0x2d8
+#define QSERDES_V6_N4_RX_MODE_RATE2_B2 0x2dc
+#define QSERDES_V6_N4_RX_MODE_RATE2_B3 0x2e0
+#define QSERDES_V6_N4_RX_MODE_RATE2_B4 0x2e4
+#define QSERDES_V6_N4_RX_MODE_RATE2_B5 0x2e8
+#define QSERDES_V6_N4_RX_MODE_RATE2_B6 0x2ec
+#define QSERDES_V6_N4_RX_RX_SUMMER_CAL_SPD_MODE 0x30c
+#define QSERDES_V6_N4_RX_RX_BKUP_CTRL1 0x310
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 3a0512c3e07a..63b3cbfcb50f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_n4.h"
#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
#include "phy-qcom-qmp-qserdes-com-v7.h"
--
2.34.1
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB.
Add the new PCS USB specific offsets in a dedicated header file.
Signed-off-by: Abel Vesa <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h
new file mode 100644
index 000000000000..6e785c73f4da
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_USB_V7_H_
+#define QCOM_PHY_QMP_PCS_USB_V7_H_
+
+/* Only for QMP V7 PHY - USB3 have different offsets than V6 */
+#define QPHY_V7_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18
+#define QPHY_V7_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c
+#define QPHY_V7_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
+#define QPHY_V7_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44
+
+#endif
--
2.34.1
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB and PCIE.
Add the new qserdes TX RX offsets in a dedicated header file.
Signed-off-by: Abel Vesa <[email protected]>
---
.../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h | 78 ++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 79 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h
new file mode 100644
index 000000000000..91f865b11347
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V7_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V7_H_
+
+#define QSERDES_V7_TX_CLKBUF_ENABLE 0x08
+#define QSERDES_V7_TX_RESET_TSYNC_EN 0x1c
+#define QSERDES_V7_TX_PRE_STALL_LDO_BOOST_EN 0x20
+#define QSERDES_V7_TX_TX_BAND 0x24
+#define QSERDES_V7_TX_INTERFACE_SELECT 0x2c
+#define QSERDES_V7_TX_RES_CODE_LANE_TX 0x34
+#define QSERDES_V7_TX_RES_CODE_LANE_RX 0x38
+#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_TX 0x3c
+#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_RX 0x40
+#define QSERDES_V7_TX_PARRATE_REC_DETECT_IDLE_EN 0x60
+#define QSERDES_V7_TX_BIST_PATTERN7 0x7c
+#define QSERDES_V7_TX_LANE_MODE_1 0x84
+#define QSERDES_V7_TX_LANE_MODE_2 0x88
+#define QSERDES_V7_TX_LANE_MODE_3 0x8c
+#define QSERDES_V7_TX_LANE_MODE_4 0x90
+#define QSERDES_V7_TX_LANE_MODE_5 0x94
+#define QSERDES_V7_TX_RCV_DETECT_LVL_2 0xa4
+#define QSERDES_V7_TX_TRAN_DRVR_EMP_EN 0xc0
+#define QSERDES_V7_TX_TX_INTERFACE_MODE 0xc4
+#define QSERDES_V7_TX_VMODE_CTRL1 0xc8
+#define QSERDES_V7_TX_PI_QEC_CTRL 0xe4
+
+#define QSERDES_V7_RX_UCDR_FO_GAIN 0x08
+#define QSERDES_V7_RX_UCDR_SO_GAIN 0x14
+#define QSERDES_V7_RX_UCDR_FASTLOCK_FO_GAIN 0x30
+#define QSERDES_V7_RX_UCDR_SO_SATURATION_AND_ENABLE 0x34
+#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_LOW 0x3c
+#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_HIGH 0x40
+#define QSERDES_V7_RX_UCDR_PI_CONTROLS 0x44
+#define QSERDES_V7_RX_UCDR_SB2_THRESH1 0x4c
+#define QSERDES_V7_RX_UCDR_SB2_THRESH2 0x50
+#define QSERDES_V7_RX_UCDR_SB2_GAIN1 0x54
+#define QSERDES_V7_RX_UCDR_SB2_GAIN2 0x58
+#define QSERDES_V7_RX_AUX_DATA_TCOARSE_TFINE 0x60
+#define QSERDES_V7_RX_TX_ADAPT_POST_THRESH 0xcc
+#define QSERDES_V7_RX_VGA_CAL_CNTRL1 0xd4
+#define QSERDES_V7_RX_VGA_CAL_CNTRL2 0xd8
+#define QSERDES_V7_RX_GM_CAL 0xdc
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL2 0xec
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL3 0xf0
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL4 0xf4
+#define QSERDES_V7_RX_RX_IDAC_TSETTLE_LOW 0xf8
+#define QSERDES_V7_RX_RX_IDAC_TSETTLE_HIGH 0xfc
+#define QSERDES_V7_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
+#define QSERDES_V7_RX_SIDGET_ENABLES 0x118
+#define QSERDES_V7_RX_SIGDET_CNTRL 0x11c
+#define QSERDES_V7_RX_SIGDET_DEGLITCH_CNTRL 0x124
+#define QSERDES_V7_RX_RX_MODE_00_LOW 0x15c
+#define QSERDES_V7_RX_RX_MODE_00_HIGH 0x160
+#define QSERDES_V7_RX_RX_MODE_00_HIGH2 0x164
+#define QSERDES_V7_RX_RX_MODE_00_HIGH3 0x168
+#define QSERDES_V7_RX_RX_MODE_00_HIGH4 0x16c
+#define QSERDES_V7_RX_RX_MODE_01_LOW 0x170
+#define QSERDES_V7_RX_RX_MODE_01_HIGH 0x174
+#define QSERDES_V7_RX_RX_MODE_01_HIGH2 0x178
+#define QSERDES_V7_RX_RX_MODE_01_HIGH3 0x17c
+#define QSERDES_V7_RX_RX_MODE_01_HIGH4 0x180
+#define QSERDES_V7_RX_RX_MODE_10_LOW 0x184
+#define QSERDES_V7_RX_RX_MODE_10_HIGH 0x188
+#define QSERDES_V7_RX_RX_MODE_10_HIGH2 0x18c
+#define QSERDES_V7_RX_RX_MODE_10_HIGH3 0x190
+#define QSERDES_V7_RX_RX_MODE_10_HIGH4 0x194
+#define QSERDES_V7_RX_DFE_EN_TIMER 0x1a0
+#define QSERDES_V7_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4
+#define QSERDES_V7_RX_DCC_CTRL1 0x1a8
+#define QSERDES_V7_RX_VTH_CODE 0x1b0
+#define QSERDES_V7_RX_SIGDET_CAL_CTRL1 0x1e4
+#define QSERDES_V7_RX_SIGDET_CAL_TRIM 0x1f8
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 63b3cbfcb50f..6923496cbfee 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -28,6 +28,7 @@
#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
#include "phy-qcom-qmp-qserdes-com-v7.h"
+#include "phy-qcom-qmp-qserdes-txrx-v7.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB
and PCIE g3x2. Add the new qserdes com offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v7.h | 86 ++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 +
2 files changed, 88 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v7.h
new file mode 100644
index 000000000000..9fe7326e4190
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v7.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_COM_V7_H_
+#define QCOM_PHY_QMP_QSERDES_COM_V7_H_
+
+/* Only for QMP V7 PHY - QSERDES COM registers */
+
+#define QSERDES_V7_COM_SSC_STEP_SIZE1_MODE1 0x00
+#define QSERDES_V7_COM_SSC_STEP_SIZE2_MODE1 0x04
+#define QSERDES_V7_COM_CP_CTRL_MODE1 0x10
+#define QSERDES_V7_COM_PLL_RCTRL_MODE1 0x14
+#define QSERDES_V7_COM_PLL_CCTRL_MODE1 0x18
+#define QSERDES_V7_COM_CORECLK_DIV_MODE1 0x1c
+#define QSERDES_V7_COM_LOCK_CMP1_MODE1 0x20
+#define QSERDES_V7_COM_LOCK_CMP2_MODE1 0x24
+#define QSERDES_V7_COM_DEC_START_MODE1 0x28
+#define QSERDES_V7_COM_DEC_START_MSB_MODE1 0x2c
+#define QSERDES_V7_COM_DIV_FRAC_START1_MODE1 0x30
+#define QSERDES_V7_COM_DIV_FRAC_START2_MODE1 0x34
+#define QSERDES_V7_COM_DIV_FRAC_START3_MODE1 0x38
+#define QSERDES_V7_COM_HSCLK_SEL_1 0x3c
+#define QSERDES_V7_COM_INTEGLOOP_GAIN0_MODE1 0x40
+#define QSERDES_V7_COM_INTEGLOOP_GAIN1_MODE1 0x44
+#define QSERDES_V7_COM_VCO_TUNE1_MODE1 0x48
+#define QSERDES_V7_COM_VCO_TUNE2_MODE1 0x4c
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x50
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x54
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x58
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x5c
+#define QSERDES_V7_COM_SSC_STEP_SIZE1_MODE0 0x60
+#define QSERDES_V7_COM_SSC_STEP_SIZE2_MODE0 0x64
+#define QSERDES_V7_COM_CP_CTRL_MODE0 0x70
+#define QSERDES_V7_COM_PLL_RCTRL_MODE0 0x74
+#define QSERDES_V7_COM_PLL_CCTRL_MODE0 0x78
+#define QSERDES_V7_COM_PLL_CORE_CLK_DIV_MODE0 0x7c
+#define QSERDES_V7_COM_LOCK_CMP1_MODE0 0x80
+#define QSERDES_V7_COM_LOCK_CMP2_MODE0 0x84
+#define QSERDES_V7_COM_DEC_START_MODE0 0x88
+#define QSERDES_V7_COM_DEC_START_MSB_MODE0 0x8c
+#define QSERDES_V7_COM_DIV_FRAC_START1_MODE0 0x90
+#define QSERDES_V7_COM_DIV_FRAC_START2_MODE0 0x94
+#define QSERDES_V7_COM_DIV_FRAC_START3_MODE0 0x98
+#define QSERDES_V7_COM_HSCLK_HS_SWITCH_SEL_1 0x9c
+#define QSERDES_V7_COM_INTEGLOOP_GAIN0_MODE0 0xa0
+#define QSERDES_V7_COM_INTEGLOOP_GAIN1_MODE0 0xa4
+#define QSERDES_V7_COM_VCO_TUNE1_MODE0 0xa8
+#define QSERDES_V7_COM_VCO_TUNE2_MODE0 0xac
+#define QSERDES_V7_COM_BG_TIMER 0xbc
+#define QSERDES_V7_COM_SSC_EN_CENTER 0xc0
+#define QSERDES_V7_COM_SSC_PER1 0xcc
+#define QSERDES_V7_COM_SSC_PER2 0xd0
+#define QSERDES_V7_COM_PLL_POST_DIV_MUX 0xd8
+#define QSERDES_V7_COM_PLL_BIAS_EN_CLK_BUFLR_EN 0xdc
+#define QSERDES_V7_COM_CLK_ENABLE1 0xe0
+#define QSERDES_V7_COM_SYS_CLK_CTRL 0xe4
+#define QSERDES_V7_COM_SYSCLK_BUF_ENABLE 0xe8
+#define QSERDES_V7_COM_PLL_IVCO 0xf4
+#define QSERDES_V7_COM_PLL_IVCO_MODE1 0xf8
+#define QSERDES_V7_COM_SYSCLK_EN_SEL 0x110
+#define QSERDES_V7_COM_RESETSM_CNTRL 0x118
+#define QSERDES_V7_COM_LOCK_CMP_EN 0x120
+#define QSERDES_V7_COM_LOCK_CMP_CFG 0x124
+#define QSERDES_V7_COM_VCO_TUNE_CTRL 0x13c
+#define QSERDES_V7_COM_VCO_TUNE_MAP 0x140
+#define QSERDES_V7_COM_VCO_TUNE_INITVAL2 0x148
+#define QSERDES_V7_COM_VCO_TUNE_MAXVAL2 0x158
+#define QSERDES_V7_COM_CLK_SELECT 0x164
+#define QSERDES_V7_COM_CORE_CLK_EN 0x170
+#define QSERDES_V7_COM_CMN_CONFIG_1 0x174
+#define QSERDES_V7_COM_SVS_MODE_CLK_SEL 0x17c
+#define QSERDES_V7_COM_CMN_MISC_1 0x184
+#define QSERDES_V7_COM_CMN_MODE 0x188
+#define QSERDES_V7_COM_PLL_VCO_DC_LEVEL_CTRL 0x198
+#define QSERDES_V7_COM_AUTO_GAIN_ADJ_CTRL_1 0x1a4
+#define QSERDES_V7_COM_AUTO_GAIN_ADJ_CTRL_2 0x1a8
+#define QSERDES_V7_COM_AUTO_GAIN_ADJ_CTRL_3 0x1ac
+#define QSERDES_V7_COM_ADDITIONAL_MISC 0x1b4
+#define QSERDES_V7_COM_ADDITIONAL_MISC_2 0x1b8
+#define QSERDES_V7_COM_ADDITIONAL_MISC_3 0x1bc
+#define QSERDES_V7_COM_CMN_STATUS 0x1d0
+#define QSERDES_V7_COM_C_READY_STATUS 0x1f8
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 21f6a56e7ae3..3a0512c3e07a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -26,6 +26,8 @@
#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
+#include "phy-qcom-qmp-qserdes-com-v7.h"
+
#include "phy-qcom-qmp-qserdes-pll.h"
#include "phy-qcom-qmp-pcs-v2.h"
--
2.34.1
On Mon, 4 Dec 2023 at 15:08, Abel Vesa <[email protected]> wrote:
>
> The X1E80100 platform bumps the HW version of QMP phy to v7 for USB and PCIE.
> Add the new qserdes TX RX offsets in a dedicated header file.
>
> Signed-off-by: Abel Vesa <[email protected]>
> ---
> .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h | 78 ++++++++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
> 2 files changed, 79 insertions(+)
Reviewed-by: Dmitry Baryshkov <[email protected]>
--
With best wishes
Dmitry