On several QUSB2 Targets, the hs_phy_irq mentioned is actually
qusb2_phy interrupt specific to QUSB2 Phy's. Rename hs_phy_irq
to qusb_phy for such targets.
In actuality, the hs_phy_irq is also present in these targets, but
kept in for debug purposes in hw test environments. This is not
triggered by default and its functionality is mutually exclusive
to that of qusb2_phy interrupt.
Add missing hs_phy_irq's, pwr_event irq's for qusb2 phy targets.
Signed-off-by: Krishna Kurapati <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/qcom/msm8953.dtsi | 7 +++++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 19 ++++++++++++++-----
arch/arm64/boot/dts/qcom/msm8998.dtsi | 7 +++++--
arch/arm64/boot/dts/qcom/sdm630.dtsi | 19 ++++++++++++++-----
arch/arm64/boot/dts/qcom/sm6115.dtsi | 9 +++++++--
arch/arm64/boot/dts/qcom/sm6125.dtsi | 9 +++++++++
8 files changed, 82 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9aec89d5e095..4edad51e0481 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -395,7 +395,7 @@ tcsr: syscon@1937000 {
};
usb2: usb@70f8800 {
- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+ compatible = "qcom,ipq6018-dwc3-sec", "qcom,dwc3";
reg = <0x0 0x070f8800 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
@@ -411,6 +411,12 @@ usb2: usb@70f8800 {
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
assigned-clock-rates = <133330000>,
<24000000>;
+
+ interrupts-extended = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy";
+
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
@@ -559,6 +565,13 @@ usb3: usb@8af8800 {
<133330000>,
<20000000>;
+ interrupts-extended = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
+
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 5d05819f356d..2977ef424986 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -619,6 +619,13 @@ usb_0: usb@8af8800 {
<133330000>,
<19200000>;
+ interrupts-extended = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
+
power-domains = <&gcc USB0_GDSC>;
resets = <&gcc GCC_USB0_BCR>;
@@ -661,6 +668,13 @@ usb_1: usb@8cf8800 {
<133330000>,
<19200000>;
+ interrupts-extended = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
+
power-domains = <&gcc USB1_GDSC>;
resets = <&gcc GCC_USB1_BCR>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index e7de7632669a..29a6f9ad3df3 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1118,9 +1118,12 @@ usb3: usb@70f8800 {
#size-cells = <1>;
ranges;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6ba9da9e6a8b..a5400d7dfb9c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3026,9 +3026,14 @@ usb3: usb@6af8800 {
#size-cells = <1>;
ranges;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "hs_phy_irq",
+ "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
@@ -3382,14 +3387,18 @@ blsp2_spi6: spi@75ba000 {
};
usb2: usb@76f8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ compatible = "qcom,msm8996-dwc3-sec", "qcom,dwc3";
reg = <0x076f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq",
+ "pwr_event",
+ "qusb2_phy";
clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
<&gcc GCC_USB20_MASTER_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b485bf925ce6..9b7d22c4f197 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2135,9 +2135,12 @@ usb3: usb@a8f8800 {
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <120000000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 775700f78e0f..5be337c07393 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1303,9 +1303,14 @@ usb3: usb@a8f8800 {
assigned-clock-rates = <19200000>, <120000000>,
<19200000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "hs_phy_irq",
+ "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
qcom,select-utmi-as-pipe-clk;
@@ -1467,7 +1472,7 @@ opp-384000000 {
};
usb2: usb@c2f8800 {
- compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+ compatible = "qcom,sdm660-dwc3-sec", "qcom,dwc3";
reg = <0x0c2f8800 0x400>;
status = "disabled";
#address-cells = <1>;
@@ -1485,8 +1490,12 @@ usb2: usb@c2f8800 {
<&gcc GCC_USB20_MASTER_CLK>;
assigned-clock-rates = <19200000>, <60000000>;
- interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq",
+ "pwr_event",
+ "qusb2_phy";
qcom,select-utmi-as-pipe-clk;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351240..748dfb4dc6c7 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1301,9 +1301,14 @@ usb: usb@4ef8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <66666667>;
- interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "hs_phy_irq",
+ "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
resets = <&gcc GCC_USB30_PRIM_BCR>;
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index eb07eca3a48d..d5b6ee4e104c 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1185,6 +1185,15 @@ usb3: usb@4ef8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <66666667>;
+ interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq",
+ "pwr_event",
+ "qusb2_phy",
+ "ss_phy_irq";
+
power-domains = <&gcc USB30_PRIM_GDSC>;
qcom,select-utmi-as-pipe-clk;
status = "disabled";
--
2.42.0