There are two typos in this dtsi, so fix it.
classis -> chassis.
80700000 -> 80600000
Signed-off-by: Jianhua Lu <[email protected]>
---
No changes in v2.
arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3dc91e..3d4ea428e4cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -23,7 +23,7 @@
/delete-node/ &xbl_aop_mem;
/ {
- classis-type = "tablet";
+ chassis-type = "tablet";
/* required for bootloader to select correct board */
qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +114,7 @@ vreg_s6c_0p88: smpc6-regulator {
};
reserved-memory {
- xbl_aop_mem: xbl-aop@80700000 {
+ xbl_aop_mem: xbl-aop@80600000 {
reg = <0x0 0x80600000 0x0 0x260000>;
no-map;
};
--
2.41.0
Change dr_mode to otg and set usb_role_swith property to enable
usb otg.
Signed-off-by: Jianhua Lu <[email protected]>
---
Changes in v2:
1. a new patch that I missed to generate.
arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index ba2119da1979..6abca574398d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -696,11 +696,12 @@ &usb_1 {
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
maximum-speed = "high-speed";
/* Remove USB3 phy */
phys = <&usb_1_hsphy>;
phy-names = "usb2-phy";
+ usb-role-switch;
};
&usb_1_hsphy {
--
2.41.0
Add type-c node to feature otg function.
Signed-off-by: Jianhua Lu <[email protected]>
---
No changes in v2.
.../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 3d4ea428e4cb..ba2119da1979 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
@@ -627,6 +628,37 @@ vol_up_n: vol-up-n-state {
};
};
+&pm8150b_typec {
+ vdd-pdphy-supply = <&vreg_l2a_3p1>;
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pm8150b_role_switch_in: endpoint {
+ remote-endpoint = <&usb_1_role_switch_out>;
+ };
+ };
+ };
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -678,6 +710,10 @@ &usb_1_hsphy {
status = "okay";
};
+&usb_1_role_switch_out {
+ remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
&ufs_mem_hc {
vcc-supply = <&vreg_l17a_3p0>;
vcc-max-microamp = <800000>;
--
2.41.0
On 25.11.2023 03:33, Jianhua Lu wrote:
> There are two typos in this dtsi, so fix it.
> classis -> chassis.
> 80700000 -> 80600000
>
> Signed-off-by: Jianhua Lu <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On 25.11.2023 03:33, Jianhua Lu wrote:
> Add type-c node to feature otg function.
>
> Signed-off-by: Jianhua Lu <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On 25.11.2023 03:33, Jianhua Lu wrote:
> Change dr_mode to otg and set usb_role_swith property to enable
switch
> usb otg.
>
> Signed-off-by: Jianhua Lu <[email protected]>
> ---
Guess this should be squashed with p1 but okay..
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad