From: Philipp Zabel <[email protected]>
Add the missing pinmux setting for alternate function 4 on the
GPIO1_IO03 pin, which muxes the pin as 32 kHz oscillator output.
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Roland Hieber <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
index 69f2c1ec8254..1530631b0d70 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
@@ -33,6 +33,7 @@
#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0
#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3
#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OSC32K_32K_OUT 0x000C 0x003C 0x0000 0x4 0x0
#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0
#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0
#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3
--
2.39.2