Add node to support the QUP5 SPI controller inside of IPQ6018.
Some routers use this bus to connect SPI TPM chips.
Signed-off-by: Chukun Pan <[email protected]>
---
Changes in v2:
* No changes, resend due to error link to other threads.
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index ec0a0ce1849e..2399d16f147e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -527,6 +527,20 @@ blsp1_spi2: spi@78b6000 {
status = "disabled";
};
+ blsp1_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x078b9000 0x0 0x600>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
blsp1_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
--
2.25.1
On 03/12/2023 16:40, Chukun Pan wrote:
> Add node to support the QUP5 SPI controller inside of IPQ6018.
> Some routers use this bus to connect SPI TPM chips.
>
> Signed-off-by: Chukun Pan <[email protected]>
> ---
> Changes in v2:
> * No changes, resend due to error link to other threads.
Why are you sending this separately from the UART patch?
Best regards,
Krzysztof
> Why are you sending this separately from the UART patch?
Because they are independent and have no dependencies.
Should I send these in the same thread?
Thanks,
Chukun
--
2.25.1
On Sun, 03 Dec 2023 23:40:03 +0800, Chukun Pan wrote:
> Add node to support the QUP5 SPI controller inside of IPQ6018.
> Some routers use this bus to connect SPI TPM chips.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: ipq6018: Add QUP5 SPI node
commit: 2e16f9dc9be07f08442d63d682cdf89d6321b408
Best regards,
--
Bjorn Andersson <[email protected]>