From: Francesco Dolcini <[email protected]>
Add Toradex Verdin IMX8MP Mallow carrier board support. Mallow is a
low-cost carrier board in the Verdin family with a small form factor and
build for volume production making it ideal for industrial and embedded
applications.
https://www.toradex.com/products/carrier-board/mallow-carrier-board
v1:
- https://lore.kernel.org/all/[email protected]/
v2:
- remove dt nodes: eeprom_display_adapter, hwmon
- add Acked-by: Krzysztof
- correct hwmon_temp node compatible to "ti,tmp1075"
Joao Paulo Goncalves (2):
dt-bindings: arm: fsl: add verdin imx8mp mallow board
arm64: dts: freescale: verdin-imx8mp: add support to mallow board
.../devicetree/bindings/arm/fsl.yaml | 2 +
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../dts/freescale/imx8mp-verdin-mallow.dtsi | 199 ++++++++++++++++++
.../imx8mp-verdin-nonwifi-mallow.dts | 18 ++
.../freescale/imx8mp-verdin-wifi-mallow.dts | 18 ++
5 files changed, 239 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
--
2.25.1
From: Joao Paulo Goncalves <[email protected]>
Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin
IMX8MP SoM. Mallow is a low-cost carrier board in the Verdin family with
a small form factor and build for volume production making it ideal for
industrial and embedded applications.
https://www.toradex.com/products/carrier-board/mallow-carrier-board
Signed-off-by: Joao Paulo Goncalves <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
v2:
- add Acked-by: Krzysztof
---
Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 32b195852a75..e2e9a443937d 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1100,6 +1100,7 @@ properties:
- enum:
- toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
- toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board
+ - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow
- toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia
- const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
@@ -1110,6 +1111,7 @@ properties:
- enum:
- toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
- toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+ - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow
- toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
- const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
--
2.25.1
On Fri, Dec 01, 2023 at 04:39:27PM +0100, Francesco Dolcini wrote:
> From: Francesco Dolcini <[email protected]>
>
> Add Toradex Verdin IMX8MP Mallow carrier board support. Mallow is a
> low-cost carrier board in the Verdin family with a small form factor and
> build for volume production making it ideal for industrial and embedded
> applications.
>
> https://www.toradex.com/products/carrier-board/mallow-carrier-board
>
> v1:
> - https://lore.kernel.org/all/[email protected]/
> v2:
> - remove dt nodes: eeprom_display_adapter, hwmon
> - add Acked-by: Krzysztof
> - correct hwmon_temp node compatible to "ti,tmp1075"
>
> Joao Paulo Goncalves (2):
> dt-bindings: arm: fsl: add verdin imx8mp mallow board
> arm64: dts: freescale: verdin-imx8mp: add support to mallow board
Ok, applied this version instead.
It would be helpful if you drop a note on the previous version when you
discard it with a new one.
Shawn