Changes since v4:
- Add Reviewed-by tag from Conor to dt-bindings.
- Add Documentation/admin-guide/perf/starfive_starlink_pmu.rst.
- Rework starfive_starlink_pmu.c based on Jonathan's comment.
Changes since v3:
- Change dt-bindings filename along with the compatible field to
"starfive,jh8100-starlink-pmu" with SOC specific naming
convention.
- Drop unused label defined in examples section in dt-bindings.
- Update compatible field in starfive_starlink_pmu.c to the
aforementioned.
Changes since v2:
- Change compatible field from generic "starfive,starlink-pmu"
to "starfive,starlink-500-pmu" with specific IP versioning
in bindings and driver.
- Fix warning '-Wmissing-prototypes' reported by kernel test robot,
by appending static to starlink_pmu_set_event_period() in
starfive_starlink_pmu.c.
Changes since v1:
- Change 'depends on SOC_STARFIVE' to 'depends on ARCH_STARFIVE'
in Kconfig
----
This patch series adds support for StarFive's Starlink Performance
Monitor Unit(PMU).
StarFive's StarLink PMU integrates one or more CPU cores with
a shared L3 memory system. The PMU supports overflow interrupt,
up to 16 programmable 64bit event counters, and an independent
64bit cycle counter.
StarLink PMU is accessed via MMIO.
Example Perf stat output:
[root@user]# perf stat -a -e /starfive_starlink_pmu/cycles/ \
-e /starfive_starlink_pmu/read_miss/ \
-e /starfive_starlink_pmu/read_hit/ \
-e /starfive_starlink_pmu/release_request/ \
-e /starfive_starlink_pmu/write_hit/ \
-e /starfive_starlink_pmu/write_miss/ \
-e /starfive_starlink_pmu/write_request/ \
-e /starfive_starlink_pmu/writeback/ \
-e /starfive_starlink_pmu/read_request/ \
-- openssl speed rsa2048
Doing 2048 bits private rsa's for 10s: 5 2048 bits private RSA's in
2.84s
Doing 2048 bits public rsa's for 10s: 169 2048 bits public RSA's in
2.42s
version: 3.0.11
built on: Tue Sep 19 13:02:31 2023 UTC
options: bn(64,64)
CPUINFO: N/A
sign verify sign/s verify/s
rsa 2048 bits 0.568000s 0.014320s 1.8 69.8
/////////
Performance counter stats for 'system wide':
649991998 starfive_starlink_pmu/cycles/
1009690 starfive_starlink_pmu/read_miss/
1079750 starfive_starlink_pmu/read_hit/
2089405 starfive_starlink_pmu/release_request/
129 starfive_starlink_pmu/write_hit/
70 starfive_starlink_pmu/write_miss/
194 starfive_starlink_pmu/write_request/
150080 starfive_starlink_pmu/writeback/
2089423 starfive_starlink_pmu/read_request/
27.062755678 seconds time elapsed
Ji Sheng Teoh (3):
perf: starfive: Add StarLink PMU support
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
Documentation/admin-guide/perf/index.rst | 1 +
.../perf/starfive_starlink_pmu.rst | 46 ++
.../perf/starfive,jh8100-starlink-pmu.yaml | 46 ++
drivers/perf/Kconfig | 9 +
drivers/perf/Makefile | 1 +
drivers/perf/starfive_starlink_pmu.c | 643 ++++++++++++++++++
6 files changed, 746 insertions(+)
create mode 100644 Documentation/admin-guide/perf/starfive_starlink_pmu.rst
create mode 100644 Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml
create mode 100644 drivers/perf/starfive_starlink_pmu.c
--
2.25.1
This patch adds support for StarFive's StarLink PMU (Performance
Monitor Unit). StarLink PMU integrates one or more CPU cores with
a shared L3 memory system. The PMU supports overflow interrupt,
up to 16 programmable 64bit event counters, and an independent
64bit cycle counter. StarLink PMU is accessed via MMIO.
Example Perf stat output:
[root@user]# perf stat -a -e /starfive_starlink_pmu/cycles/ \
-e /starfive_starlink_pmu/read_miss/ \
-e /starfive_starlink_pmu/read_hit/ \
-e /starfive_starlink_pmu/release_request/ \
-e /starfive_starlink_pmu/write_hit/ \
-e /starfive_starlink_pmu/write_miss/ \
-e /starfive_starlink_pmu/write_request/ \
-e /starfive_starlink_pmu/writeback/ \
-e /starfive_starlink_pmu/read_request/ \
-- openssl speed rsa2048
Doing 2048 bits private rsa's for 10s: 5 2048 bits private RSA's in
2.84s
Doing 2048 bits public rsa's for 10s: 169 2048 bits public RSA's in
2.42s
version: 3.0.11
built on: Tue Sep 19 13:02:31 2023 UTC
options: bn(64,64)
CPUINFO: N/A
sign verify sign/s verify/s
rsa 2048 bits 0.568000s 0.014320s 1.8 69.8
/////////
Performance counter stats for 'system wide':
649991998 starfive_starlink_pmu/cycles/
1009690 starfive_starlink_pmu/read_miss/
1079750 starfive_starlink_pmu/read_hit/
2089405 starfive_starlink_pmu/release_request/
129 starfive_starlink_pmu/write_hit/
70 starfive_starlink_pmu/write_miss/
194 starfive_starlink_pmu/write_request/
150080 starfive_starlink_pmu/writeback/
2089423 starfive_starlink_pmu/read_request/
27.062755678 seconds time elapsed
Signed-off-by: Ji Sheng Teoh <[email protected]>
---
drivers/perf/Kconfig | 9 +
drivers/perf/Makefile | 1 +
drivers/perf/starfive_starlink_pmu.c | 643 +++++++++++++++++++++++++++
3 files changed, 653 insertions(+)
create mode 100644 drivers/perf/starfive_starlink_pmu.c
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 273d67ecf6d2..41278742ef88 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -86,6 +86,15 @@ config RISCV_PMU_SBI
full perf feature support i.e. counter overflow, privilege mode
filtering, counter configuration.
+config STARFIVE_STARLINK_PMU
+ depends on ARCH_STARFIVE
+ bool "StarFive StarLink PMU"
+ help
+ Provide support for StarLink Performance Monitor Unit.
+ StarLink Performance Monitor Unit integrates one or more cores with
+ an L3 memory system. The L3 cache events are added into perf event
+ subsystem, allowing monitoring of various L3 cache perf events.
+
config ARM_PMU_ACPI
depends on ARM_PMU && ACPI
def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 16b3ec4db916..e2153aee1e04 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
obj-$(CONFIG_RISCV_PMU_LEGACY) += riscv_pmu_legacy.o
obj-$(CONFIG_RISCV_PMU_SBI) += riscv_pmu_sbi.o
+obj-$(CONFIG_STARFIVE_STARLINK_PMU) += starfive_starlink_pmu.o
obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
diff --git a/drivers/perf/starfive_starlink_pmu.c b/drivers/perf/starfive_starlink_pmu.c
new file mode 100644
index 000000000000..2447ca09a471
--- /dev/null
+++ b/drivers/perf/starfive_starlink_pmu.c
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * StarFive's StarLink PMU driver
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ *
+ * Author: Ji Sheng Teoh <[email protected]>
+ *
+ */
+
+#define STARLINK_PMU_PDEV_NAME "starfive_starlink_pmu"
+#define pr_fmt(fmt) STARLINK_PMU_PDEV_NAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/sysfs.h>
+
+#define STARLINK_PMU_MAX_COUNTERS 64
+#define STARLINK_PMU_NUM_COUNTERS 16
+#define STARLINK_PMU_IDX_CYCLE_COUNTER 63
+
+#define STARLINK_PMU_EVENT_SELECT 0x060
+#define STARLINK_PMU_EVENT_COUNTER 0x160
+#define STARLINK_PMU_COUNTER_MASK GENMASK_ULL(63, 0)
+#define STARLINK_PMU_CYCLE_COUNTER 0x058
+
+#define STARLINK_PMU_CONTROL 0x040
+#define STARLINK_PMU_GLOBAL_ENABLE BIT(0)
+
+#define STARLINK_PMU_INTERRUPT_ENABLE 0x050
+#define STARLINK_PMU_COUNTER_OVERFLOW_STATUS 0x048
+#define STARLINK_PMU_CYCLE_OVERFLOW_MASK BIT(63)
+
+#define STARLINK_CYCLES 0x058
+#define CACHE_READ_REQUEST 0x04000701
+#define CACHE_WRITE_REQUEST 0x03000001
+#define CACHE_RELEASE_REQUEST 0x0003e001
+#define CACHE_READ_HIT 0x00901202
+#define CACHE_READ_MISS 0x04008002
+#define CACHE_WRITE_HIT 0x006c0002
+#define CACHE_WRITE_MISS 0x03000002
+#define CACHE_WRITEBACK 0x00000403
+
+#define to_starlink_pmu(p) (container_of(p, struct starlink_pmu, pmu))
+
+#define STARLINK_FORMAT_ATTR(_name, _config) \
+ (&((struct dev_ext_attribute[]) { \
+ { .attr = __ATTR(_name, 0444, starlink_pmu_sysfs_format_show, NULL), \
+ .var = (void *)_config, } \
+ })[0].attr.attr)
+
+#define STARLINK_EVENT_ATTR(_name, _id) \
+ PMU_EVENT_ATTR_ID(_name, starlink_pmu_sysfs_event_show, _id)
+
+static int starlink_pmu_cpuhp_state;
+
+struct starlink_hw_events {
+ struct perf_event *events[STARLINK_PMU_MAX_COUNTERS];
+ DECLARE_BITMAP(used_mask, STARLINK_PMU_MAX_COUNTERS);
+};
+
+struct starlink_pmu {
+ struct pmu pmu;
+ struct starlink_hw_events __percpu *hw_events;
+ struct hlist_node node;
+ struct notifier_block starlink_pmu_pm_nb;
+ void __iomem *pmu_base;
+ cpumask_t cpumask;
+ int irq;
+};
+
+static ssize_t
+starlink_pmu_sysfs_format_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+
+ return sysfs_emit(buf, "%s\n", (char *)eattr->var);
+}
+
+static struct attribute *starlink_pmu_format_attrs[] = {
+ STARLINK_FORMAT_ATTR(event, "config:0-31"),
+ NULL
+};
+
+static const struct attribute_group starlink_pmu_format_attr_group = {
+ .name = "format",
+ .attrs = starlink_pmu_format_attrs,
+};
+
+static ssize_t
+starlink_pmu_sysfs_event_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct perf_pmu_events_attr *eattr = container_of(attr,
+ struct perf_pmu_events_attr, attr);
+
+ return sysfs_emit(buf, "event=0x%02llx\n", eattr->id);
+}
+
+static struct attribute *starlink_pmu_event_attrs[] = {
+ STARLINK_EVENT_ATTR(cycles, STARLINK_CYCLES),
+ STARLINK_EVENT_ATTR(read_request, CACHE_READ_REQUEST),
+ STARLINK_EVENT_ATTR(write_request, CACHE_WRITE_REQUEST),
+ STARLINK_EVENT_ATTR(release_request, CACHE_RELEASE_REQUEST),
+ STARLINK_EVENT_ATTR(read_hit, CACHE_READ_HIT),
+ STARLINK_EVENT_ATTR(read_miss, CACHE_READ_MISS),
+ STARLINK_EVENT_ATTR(write_hit, CACHE_WRITE_HIT),
+ STARLINK_EVENT_ATTR(write_miss, CACHE_WRITE_MISS),
+ STARLINK_EVENT_ATTR(writeback, CACHE_WRITEBACK),
+ NULL
+};
+
+static const struct attribute_group starlink_pmu_events_attr_group = {
+ .name = "events",
+ .attrs = starlink_pmu_event_attrs,
+};
+
+static ssize_t
+cpumask_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(dev_get_drvdata(dev));
+
+ return cpumap_print_to_pagebuf(true, buf, &starlink_pmu->cpumask);
+}
+
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *starlink_pmu_cpumask_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL
+};
+
+static const struct attribute_group starlink_pmu_cpumask_attr_group = {
+ .attrs = starlink_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *starlink_pmu_attr_groups[] = {
+ &starlink_pmu_format_attr_group,
+ &starlink_pmu_events_attr_group,
+ &starlink_pmu_cpumask_attr_group,
+ NULL
+};
+
+static void starlink_pmu_set_event_period(struct perf_event *event)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = event->hw.idx;
+
+ /*
+ * Program counter to half of it's max count to handle
+ * cases of extreme interrupt latency.
+ */
+ u64 val = STARLINK_PMU_COUNTER_MASK >> 1;
+
+ local64_set(&hwc->prev_count, val);
+ if (hwc->config == STARLINK_CYCLES)
+ writeq(val, starlink_pmu->pmu_base + STARLINK_PMU_CYCLE_COUNTER);
+ else
+ writeq(val, starlink_pmu->pmu_base + STARLINK_PMU_EVENT_COUNTER +
+ idx * sizeof(u64));
+}
+
+static void starlink_pmu_counter_start(struct perf_event *event,
+ struct starlink_pmu *starlink_pmu)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = event->hw.idx;
+ u64 val;
+
+ /*
+ * Enable counter overflow interrupt[63:0],
+ * which is mapped as follow:
+ *
+ * event counter 0 - Bit [0]
+ * event counter 1 - Bit [1]
+ * ...
+ * cycle counter - Bit [63]
+ */
+ val = readq(starlink_pmu->pmu_base + STARLINK_PMU_INTERRUPT_ENABLE);
+
+ if (hwc->config == STARLINK_CYCLES) {
+ /*
+ * Cycle count has its dedicated register, and it starts
+ * counting as soon as STARLINK_PMU_GLOBAL_ENABLE is set.
+ */
+ val |= STARLINK_PMU_CYCLE_OVERFLOW_MASK;
+ } else {
+ writeq(event->hw.config, starlink_pmu->pmu_base +
+ STARLINK_PMU_EVENT_SELECT + idx * sizeof(u64));
+
+ val |= (1 << idx);
+ }
+
+ writeq(val, starlink_pmu->pmu_base + STARLINK_PMU_INTERRUPT_ENABLE);
+
+ writeq(STARLINK_PMU_GLOBAL_ENABLE, starlink_pmu->pmu_base +
+ STARLINK_PMU_CONTROL);
+}
+
+static void starlink_pmu_counter_stop(struct perf_event *event,
+ struct starlink_pmu *starlink_pmu)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = event->hw.idx;
+ u64 val;
+
+ val = readq(starlink_pmu->pmu_base + STARLINK_PMU_CONTROL);
+ val &= ~STARLINK_PMU_GLOBAL_ENABLE;
+ writeq(val, starlink_pmu->pmu_base + STARLINK_PMU_CONTROL);
+
+ val = readq(starlink_pmu->pmu_base + STARLINK_PMU_INTERRUPT_ENABLE);
+ if (hwc->config == STARLINK_CYCLES)
+ val &= ~STARLINK_PMU_CYCLE_OVERFLOW_MASK;
+ else
+ val &= ~(1 << idx);
+
+ writeq(val, starlink_pmu->pmu_base + STARLINK_PMU_INTERRUPT_ENABLE);
+}
+
+static void starlink_pmu_update(struct perf_event *event)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+ u64 prev_raw_count, new_raw_count;
+ u64 oldval;
+ u64 delta;
+
+ do {
+ prev_raw_count = local64_read(&hwc->prev_count);
+ if (hwc->config == STARLINK_CYCLES)
+ new_raw_count = readq(starlink_pmu->pmu_base +
+ STARLINK_PMU_CYCLE_COUNTER);
+ else
+ new_raw_count = readq(starlink_pmu->pmu_base +
+ STARLINK_PMU_EVENT_COUNTER +
+ idx * sizeof(u64));
+ oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count);
+ } while (oldval != prev_raw_count);
+
+ delta = (new_raw_count - prev_raw_count) & STARLINK_PMU_COUNTER_MASK;
+ local64_add(delta, &event->count);
+}
+
+static void starlink_pmu_start(struct perf_event *event, int flags)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
+ return;
+
+ if (flags & PERF_EF_RELOAD)
+ WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+ hwc->state = 0;
+
+ starlink_pmu_set_event_period(event);
+ starlink_pmu_counter_start(event, starlink_pmu);
+
+ perf_event_update_userpage(event);
+}
+
+static void starlink_pmu_stop(struct perf_event *event, int flags)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
+
+ starlink_pmu_counter_stop(event, starlink_pmu);
+ starlink_pmu_update(event);
+ hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+}
+
+static int starlink_pmu_add(struct perf_event *event, int flags)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct starlink_hw_events *hw_events =
+ this_cpu_ptr(starlink_pmu->hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ unsigned long *used_mask = hw_events->used_mask;
+ u32 n_events = STARLINK_PMU_NUM_COUNTERS;
+ int idx;
+
+ /*
+ * Cycle counter has dedicated register to hold counter value.
+ * Event other than cycle count has to be enabled through
+ * event select register, and assigned with independent counter
+ * as they appear.
+ */
+
+ if (hwc->config == STARLINK_CYCLES) {
+ idx = STARLINK_PMU_IDX_CYCLE_COUNTER;
+ } else {
+ idx = find_first_zero_bit(used_mask, n_events);
+ /* All counter are in use */
+ if (idx < 0)
+ return idx;
+
+ set_bit(idx, used_mask);
+ }
+
+ hwc->idx = idx;
+ hw_events->events[idx] = event;
+ hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+ if (flags & PERF_EF_START)
+ starlink_pmu_start(event, PERF_EF_RELOAD);
+
+ perf_event_update_userpage(event);
+
+ return 0;
+}
+
+static void starlink_pmu_del(struct perf_event *event, int flags)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct starlink_hw_events *hw_events =
+ this_cpu_ptr(starlink_pmu->hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+
+ starlink_pmu_stop(event, PERF_EF_UPDATE);
+ hw_events->events[hwc->idx] = NULL;
+ clear_bit(hwc->idx, hw_events->used_mask);
+
+ perf_event_update_userpage(event);
+}
+
+static bool starlink_pmu_validate_event_group(struct perf_event *event)
+{
+ struct perf_event *leader = event->group_leader;
+ struct perf_event *sibling;
+ int counter = 1;
+
+ /*
+ * Ensure hardware events in the group are on the same PMU,
+ * software events are acceptable.
+ */
+ if (event->group_leader->pmu != event->pmu &&
+ !is_software_event(event->group_leader))
+ return false;
+
+ for_each_sibling_event(sibling, leader) {
+ if (sibling->pmu != event->pmu && !is_software_event(sibling))
+ return false;
+
+ counter++;
+ }
+
+ return counter <= STARLINK_PMU_NUM_COUNTERS;
+}
+
+static int starlink_pmu_event_init(struct perf_event *event)
+{
+ struct starlink_pmu *starlink_pmu = to_starlink_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ /*
+ * Sampling is not supported, as counters are shared
+ * by all CPU.
+ */
+ if (hwc->sample_period)
+ return -EOPNOTSUPP;
+
+ /*
+ * Per-task and attach to a task are not supported,
+ * as uncore events are not specific to any CPU.
+ */
+ if (event->cpu < 0 || event->attach_state & PERF_ATTACH_TASK)
+ return -EOPNOTSUPP;
+
+ if (!starlink_pmu_validate_event_group(event))
+ return -EINVAL;
+
+ hwc->idx = -1;
+ hwc->config = event->attr.config;
+ event->cpu = cpumask_first(&starlink_pmu->cpumask);
+
+ return 0;
+}
+
+static irqreturn_t starlink_pmu_handle_irq(int irq_num, void *data)
+{
+ struct starlink_pmu *starlink_pmu = data;
+ struct starlink_hw_events *hw_events =
+ this_cpu_ptr(starlink_pmu->hw_events);
+ bool handled = false;
+ int idx;
+ u64 overflow_status;
+
+ for (idx = 0; idx < STARLINK_PMU_MAX_COUNTERS; idx++) {
+ struct perf_event *event = hw_events->events[idx];
+
+ if (!event)
+ continue;
+
+ overflow_status = readq(starlink_pmu->pmu_base +
+ STARLINK_PMU_COUNTER_OVERFLOW_STATUS);
+ if (!(overflow_status & BIT(idx)))
+ continue;
+
+ writeq(1 << idx, starlink_pmu->pmu_base +
+ STARLINK_PMU_COUNTER_OVERFLOW_STATUS);
+
+ starlink_pmu_update(event);
+ starlink_pmu_set_event_period(event);
+ handled = true;
+ }
+ return IRQ_RETVAL(handled);
+}
+
+static int starlink_setup_irqs(struct starlink_pmu *starlink_pmu,
+ struct platform_device *pdev)
+{
+ int ret, irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -EINVAL;
+
+ ret = devm_request_irq(&pdev->dev, irq, starlink_pmu_handle_irq,
+ 0, STARLINK_PMU_PDEV_NAME, starlink_pmu);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "Failed to request IRQ\n");
+
+ starlink_pmu->irq = irq;
+
+ return 0;
+}
+
+static int starlink_pmu_pm_notify(struct notifier_block *b,
+ unsigned long cmd, void *v)
+{
+ struct starlink_pmu *starlink_pmu = container_of(b, struct starlink_pmu,
+ starlink_pmu_pm_nb);
+ struct starlink_hw_events *hw_events =
+ this_cpu_ptr(starlink_pmu->hw_events);
+ int enabled = bitmap_weight(hw_events->used_mask,
+ STARLINK_PMU_MAX_COUNTERS);
+ struct perf_event *event;
+ int idx;
+
+ if (!enabled)
+ return NOTIFY_OK;
+
+ for (idx = 0; idx < STARLINK_PMU_MAX_COUNTERS; idx++) {
+ event = hw_events->events[idx];
+ if (!event)
+ continue;
+
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ /* Stop and update the counter */
+ starlink_pmu_stop(event, PERF_EF_UPDATE);
+ break;
+ case CPU_PM_EXIT:
+ case CPU_PM_ENTER_FAILED:
+ /* Restore and enable the counter */
+ starlink_pmu_start(event, PERF_EF_RELOAD);
+ break;
+ default:
+ break;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static int starlink_pmu_pm_register(struct starlink_pmu *starlink_pmu)
+{
+ if (!IS_ENABLED(CONFIG_CPU_PM))
+ return 0;
+
+ starlink_pmu->starlink_pmu_pm_nb.notifier_call = starlink_pmu_pm_notify;
+ return cpu_pm_register_notifier(&starlink_pmu->starlink_pmu_pm_nb);
+}
+
+static void starlink_pmu_pm_unregister(struct starlink_pmu *starlink_pmu)
+{
+ if (!IS_ENABLED(CONFIG_CPU_PM))
+ return;
+
+ cpu_pm_unregister_notifier(&starlink_pmu->starlink_pmu_pm_nb);
+}
+
+static void starlink_pmu_destroy(struct starlink_pmu *starlink_pmu)
+{
+ starlink_pmu_pm_unregister(starlink_pmu);
+ cpuhp_state_remove_instance(starlink_pmu_cpuhp_state,
+ &starlink_pmu->node);
+}
+
+static int starlink_pmu_probe(struct platform_device *pdev)
+{
+ struct starlink_pmu *starlink_pmu;
+ struct starlink_hw_events *hw_events;
+ struct resource *res;
+ int cpuid, i, ret;
+
+ starlink_pmu = devm_kzalloc(&pdev->dev, sizeof(*starlink_pmu), GFP_KERNEL);
+ if (!starlink_pmu)
+ return -ENOMEM;
+
+ starlink_pmu->pmu_base =
+ devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(starlink_pmu->pmu_base))
+ return PTR_ERR(starlink_pmu->pmu_base);
+
+ starlink_pmu->hw_events = alloc_percpu_gfp(struct starlink_hw_events,
+ GFP_KERNEL);
+ if (!starlink_pmu->hw_events) {
+ dev_err(&pdev->dev, "Failed to allocate per-cpu PMU data\n");
+ kfree(starlink_pmu);
+ return -ENOMEM;
+ }
+
+ for_each_possible_cpu(cpuid) {
+ hw_events = per_cpu_ptr(starlink_pmu->hw_events, cpuid);
+ for (i = 0; i < STARLINK_PMU_MAX_COUNTERS; i++)
+ hw_events->events[i] = NULL;
+ }
+
+ ret = starlink_setup_irqs(starlink_pmu, pdev);
+ if (ret)
+ return ret;
+
+ ret = cpuhp_state_add_instance(starlink_pmu_cpuhp_state,
+ &starlink_pmu->node);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register hotplug\n");
+ return ret;
+ }
+
+ ret = starlink_pmu_pm_register(starlink_pmu);
+ if (ret) {
+ cpuhp_state_remove_instance(starlink_pmu_cpuhp_state,
+ &starlink_pmu->node);
+ return ret;
+ }
+
+ starlink_pmu->pmu = (struct pmu) {
+ .task_ctx_nr = perf_invalid_context,
+ .event_init = starlink_pmu_event_init,
+ .add = starlink_pmu_add,
+ .del = starlink_pmu_del,
+ .start = starlink_pmu_start,
+ .stop = starlink_pmu_stop,
+ .read = starlink_pmu_update,
+ .attr_groups = starlink_pmu_attr_groups,
+ };
+
+ ret = perf_pmu_register(&starlink_pmu->pmu, STARLINK_PMU_PDEV_NAME, -1);
+ if (ret)
+ starlink_pmu_destroy(starlink_pmu);
+
+ return ret;
+}
+
+static const struct of_device_id starlink_pmu_of_match[] = {
+ { .compatible = "starfive,jh8100-starlink-pmu" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, starlink_pmu_of_match);
+
+static struct platform_driver starlink_pmu_driver = {
+ .driver = {
+ .name = STARLINK_PMU_PDEV_NAME,
+ .of_match_table = starlink_pmu_of_match,
+ .suppress_bind_attrs = true,
+ },
+ .probe = starlink_pmu_probe,
+};
+
+static int
+starlink_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct starlink_pmu *starlink_pmu = hlist_entry_safe(node,
+ struct starlink_pmu,
+ node);
+
+ if (cpumask_empty(&starlink_pmu->cpumask))
+ cpumask_set_cpu(cpu, &starlink_pmu->cpumask);
+
+ WARN_ON(irq_set_affinity(starlink_pmu->irq, cpumask_of(cpu)));
+
+ return 0;
+}
+
+static int
+starlink_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct starlink_pmu *starlink_pmu = hlist_entry_safe(node,
+ struct starlink_pmu,
+ node);
+ unsigned int target;
+
+ if (!cpumask_test_and_clear_cpu(cpu, &starlink_pmu->cpumask))
+ return 0;
+
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target >= nr_cpu_ids)
+ return 0;
+
+ perf_pmu_migrate_context(&starlink_pmu->pmu, cpu, target);
+
+ cpumask_set_cpu(target, &starlink_pmu->cpumask);
+ WARN_ON(irq_set_affinity(starlink_pmu->irq, cpumask_of(target)));
+
+ return 0;
+}
+
+static int __init starlink_pmu_init(void)
+{
+ int ret;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+ "soc/starfive/starlink_pmu:online",
+ starlink_pmu_online_cpu,
+ starlink_pmu_offline_cpu);
+ if (ret < 0)
+ return ret;
+
+ starlink_pmu_cpuhp_state = ret;
+
+ return platform_driver_register(&starlink_pmu_driver);
+}
+
+device_initcall(starlink_pmu_init);
--
2.25.1
Add device tree binding for StarFive's JH8100 StarLink PMU (Performance
Monitor Unit).
Signed-off-by: Ji Sheng Teoh <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
.../perf/starfive,jh8100-starlink-pmu.yaml | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml
diff --git a/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml b/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml
new file mode 100644
index 000000000000..915c6b814026
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH8100 StarLink PMU
+
+maintainers:
+ - Ji Sheng Teoh <[email protected]>
+
+description:
+ StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a
+ shared L3 memory system. The PMU support overflow interrupt, up to
+ 16 programmable 64bit event counters, and an independent 64bit cycle
+ counter. StarFive's JH8100 StarLink PMU is accessed via MMIO.
+
+properties:
+ compatible:
+ const: starfive,jh8100-starlink-pmu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pmu@12900000 {
+ compatible = "starfive,jh8100-starlink-pmu";
+ reg = <0x0 0x12900000 0x0 0x10000>;
+ interrupts = <34>;
+ };
+ };
--
2.25.1
StarFive StarLink PMU support monitoring L3 memory system PMU events.
Add documentation to describe StarFive StarLink PMU support and it's
usage.
Signed-off-by: Ji Sheng Teoh <[email protected]>
---
Documentation/admin-guide/perf/index.rst | 1 +
.../perf/starfive_starlink_pmu.rst | 46 +++++++++++++++++++
2 files changed, 47 insertions(+)
create mode 100644 Documentation/admin-guide/perf/starfive_starlink_pmu.rst
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
index a2e6f2c81146..c5de7579a71b 100644
--- a/Documentation/admin-guide/perf/index.rst
+++ b/Documentation/admin-guide/perf/index.rst
@@ -13,6 +13,7 @@ Performance monitor support
imx-ddr
qcom_l2_pmu
qcom_l3_pmu
+ starfive_starlink_pmu
arm-ccn
arm-cmn
xgene-pmu
diff --git a/Documentation/admin-guide/perf/starfive_starlink_pmu.rst b/Documentation/admin-guide/perf/starfive_starlink_pmu.rst
new file mode 100644
index 000000000000..2932ddb4eb76
--- /dev/null
+++ b/Documentation/admin-guide/perf/starfive_starlink_pmu.rst
@@ -0,0 +1,46 @@
+================================================
+StarFive StarLink Performance Monitor Unit (PMU)
+================================================
+
+StarFive StarLink Performance Monitor Unit (PMU) exists within the
+StarLink Coherent Network on Chip (CNoC) that connects multiple CPU
+clusters with an L3 memory system.
+
+The uncore PMU supports overflow interrupt, up to 16 programmable 64bit
+event counters, and an independent 64bit cycle counter.
+The PMU can only be accessed via Memory Mapped I/O and are common to the
+cores connected to the same PMU.
+
+Driver exposes supported PMU events in sysfs "events" directory under::
+
+ /sys/bus/event_source/devices/starfive_starlink_pmu/events/
+
+Driver exposes cpu used to handle PMU events in sysfs "cpumask" directory
+under::
+
+ /sys/bus/event_source/devices/starfive_starlink_pmu/cpumask/
+
+Driver describes the format of config (event ID) in sysfs "format" directory
+under::
+
+ /sys/bus/event_source/devices/starfive_starlink_pmu/format/
+
+Example of perf usage::
+
+ $ perf list
+
+ starfive_starlink_pmu/cycles/ [Kernel PMU event]
+ starfive_starlink_pmu/read_hit/ [Kernel PMU event]
+ starfive_starlink_pmu/read_miss/ [Kernel PMU event]
+ starfive_starlink_pmu/read_request/ [Kernel PMU event]
+ starfive_starlink_pmu/release_request/ [Kernel PMU event]
+ starfive_starlink_pmu/write_hit/ [Kernel PMU event]
+ starfive_starlink_pmu/write_miss/ [Kernel PMU event]
+ starfive_starlink_pmu/write_request/ [Kernel PMU event]
+ starfive_starlink_pmu/writeback/ [Kernel PMU event]
+
+
+ $ perf stat -a -e /starfive_starlink_pmu/cycles/ sleep 1
+
+Sampling is not supported. As a result, "perf record" is not supported.
+Attaching to a task is not supported, only system-wide counting is supported.
--
2.25.1