2023-12-08 06:26:19

by Sneh Shah

[permalink] [raw]
Subject: [PATCH net v3] net: stmmac: update Rx clk divider for 10M SGMII

SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
Update configure SGMII function with rx clk divider programming.

Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Signed-off-by: Sneh Shah <[email protected]>
---
v3 changelog:
- Added comment to explain why MAC needs to be reconfigured for SGMII
v2 changelog:
- Use FIELD_PREP to prepare bifield values in place of GENMASK
- Add fixes tag
---
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index d3bf42d0fceb..ab2245995bc6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -34,6 +34,7 @@
#define RGMII_CONFIG_LOOPBACK_EN BIT(2)
#define RGMII_CONFIG_PROG_SWAP BIT(1)
#define RGMII_CONFIG_DDR_MODE BIT(0)
+#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)

/* SDCC_HC_REG_DLL_CONFIG fields */
#define SDCC_DLL_CONFIG_DLL_RST BIT(30)
@@ -598,6 +599,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
return 0;
}

+/* On interface toggle MAC registetrs gets reset.
+ * Configure MAC block for SGMII on ethernet phy link up
+ */
static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
{
int val;
@@ -617,6 +621,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
case SPEED_10:
val |= ETHQOS_MAC_CTRL_PORT_SEL;
val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
+ rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
+ FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),
+ RGMII_IO_MACRO_CONFIG);
break;
}

--
2.17.1


2023-12-08 20:20:47

by Andrew Halaney

[permalink] [raw]
Subject: Re: [PATCH net v3] net: stmmac: update Rx clk divider for 10M SGMII

On Fri, Dec 08, 2023 at 11:55:02AM +0530, Sneh Shah wrote:
> SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
> Update configure SGMII function with rx clk divider programming.
>
> Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")

You didn't add my:

Tested-by: Andrew Halaney <[email protected]>

from the last version. Typically that's fine to do even if you post a
new version as long as the changes are minor (in your case it's just the
comment that was added since I tested, so definitely fine to do).

> Signed-off-by: Sneh Shah <[email protected]>
> ---
> v3 changelog:
> - Added comment to explain why MAC needs to be reconfigured for SGMII
> v2 changelog:
> - Use FIELD_PREP to prepare bifield values in place of GENMASK
> - Add fixes tag
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index d3bf42d0fceb..ab2245995bc6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -34,6 +34,7 @@
> #define RGMII_CONFIG_LOOPBACK_EN BIT(2)
> #define RGMII_CONFIG_PROG_SWAP BIT(1)
> #define RGMII_CONFIG_DDR_MODE BIT(0)
> +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)
>
> /* SDCC_HC_REG_DLL_CONFIG fields */
> #define SDCC_DLL_CONFIG_DLL_RST BIT(30)
> @@ -598,6 +599,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
> return 0;
> }
>
> +/* On interface toggle MAC registetrs gets reset.
> + * Configure MAC block for SGMII on ethernet phy link up
> + */

s/registetrs/registers/

> static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> {
> int val;
> @@ -617,6 +621,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> case SPEED_10:
> val |= ETHQOS_MAC_CTRL_PORT_SEL;
> val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
> + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
> + FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),
> + RGMII_IO_MACRO_CONFIG);
> break;
> }
>
> --
> 2.17.1
>

2023-12-09 04:20:25

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH net v3] net: stmmac: update Rx clk divider for 10M SGMII

On Fri, Dec 08, 2023 at 11:55:02AM +0530, Sneh Shah wrote:
> SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
> Update configure SGMII function with rx clk divider programming.

Are you trying saying that the RX clock is completely wrong in 10MBps
mode? Or is the RX clock good, but without some division of some other
clock signal you loose some packets now and then?

Please write your commit message such that it describe the actual
problem you're having. This will help others to know if this fix is
applicable to some issue they are seeing on their hardware, now and in
the future.

>
> Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
> Signed-off-by: Sneh Shah <[email protected]>
> ---
> v3 changelog:
> - Added comment to explain why MAC needs to be reconfigured for SGMII
> v2 changelog:
> - Use FIELD_PREP to prepare bifield values in place of GENMASK
> - Add fixes tag
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index d3bf42d0fceb..ab2245995bc6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -34,6 +34,7 @@
> #define RGMII_CONFIG_LOOPBACK_EN BIT(2)
> #define RGMII_CONFIG_PROG_SWAP BIT(1)
> #define RGMII_CONFIG_DDR_MODE BIT(0)
> +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)

This new bitfield overlaps with existing fields, is it the same
register? Did the fields move? Is it applicable to all versions?

What will existing writes to RGMII_IO_MACRO_CONFIG do to this new
layout? What will the new write do to hardware with the existing field
layout?

>
> /* SDCC_HC_REG_DLL_CONFIG fields */
> #define SDCC_DLL_CONFIG_DLL_RST BIT(30)
> @@ -598,6 +599,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
> return 0;
> }
>
> +/* On interface toggle MAC registetrs gets reset.
> + * Configure MAC block for SGMII on ethernet phy link up
> + */
> static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> {
> int val;
> @@ -617,6 +621,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> case SPEED_10:
> val |= ETHQOS_MAC_CTRL_PORT_SEL;
> val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
> + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
> + FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),

Is this just a magic constant, or does 0x31 of some convenient unit?
Could we give it name/define?

Regards,
Bjorn

> + RGMII_IO_MACRO_CONFIG);
> break;
> }
>
> --
> 2.17.1
>
>

2023-12-11 08:41:38

by Sneh Shah

[permalink] [raw]
Subject: Re: [PATCH net v3] net: stmmac: update Rx clk divider for 10M SGMII



On 12/9/2023 9:54 AM, Bjorn Andersson wrote:
> On Fri, Dec 08, 2023 at 11:55:02AM +0530, Sneh Shah wrote:
>> SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
>> Update configure SGMII function with rx clk divider programming.
>
> Are you trying saying that the RX clock is completely wrong in 10MBps
> mode? Or is the RX clock good, but without some division of some other
> clock signal you loose some packets now and then?

Without the divider, Rx clock is completely wrong. All the packets will dropped.
>
> Please write your commit message such that it describe the actual
> problem you're having. This will help others to know if this fix is
> applicable to some issue they are seeing on their hardware, now and in
> the future.
>
Rx clock divider is must for 10M SGMII to work for my hardware. Hence, It was mentioned that SGMII needs Rx clock divider for 10MBPS to work.
Will update the commit message to emphasize on how rx clock is completely wrong without this.
>>
>> Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
>> Signed-off-by: Sneh Shah <[email protected]>
>> ---
>> v3 changelog:
>> - Added comment to explain why MAC needs to be reconfigured for SGMII
>> v2 changelog:
>> - Use FIELD_PREP to prepare bifield values in place of GENMASK
>> - Add fixes tag
>> ---
>> drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
>> index d3bf42d0fceb..ab2245995bc6 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
>> @@ -34,6 +34,7 @@
>> #define RGMII_CONFIG_LOOPBACK_EN BIT(2)
>> #define RGMII_CONFIG_PROG_SWAP BIT(1)
>> #define RGMII_CONFIG_DDR_MODE BIT(0)
>> +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)
>
> This new bitfield overlaps with existing fields, is it the same
> register? Did the fields move? Is it applicable to all versions?
>
It is same register but bitfield is moved for new SGMII based HW version. Not applicable to older version. few bitfields of older HW version's RGMII register are repurposed in the new hw version for SGMII config.

> What will existing writes to RGMII_IO_MACRO_CONFIG do to this new
> layout? What will the new write do to hardware with the existing field
> layout?
>
we have two functions to configure MAC IOMACRO interface.
1. ethqos_configure_sgmii( this used this new bifield) 2. ethqos_configure_rgmii ( this used old layout)
Old HW version uses ethqos_configure_rgmii only. New HW version used ethqos_configure_sgmii only.

Old HW version is not going to use this new layout. New HW version is not going to use old layout configuration.

>>
>> /* SDCC_HC_REG_DLL_CONFIG fields */
>> #define SDCC_DLL_CONFIG_DLL_RST BIT(30)
>> @@ -598,6 +599,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
>> return 0;
>> }
>>
>> +/* On interface toggle MAC registetrs gets reset.
>> + * Configure MAC block for SGMII on ethernet phy link up
>> + */
>> static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
>> {
>> int val;
>> @@ -617,6 +621,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
>> case SPEED_10:
>> val |= ETHQOS_MAC_CTRL_PORT_SEL;
>> val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
>> + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
>> + FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),
>
> Is this just a magic constant, or does 0x31 of some convenient unit?
> Could we give it name/define?
>
It is just a constant based on programming guide of HW. Will add a #define for it.
> Regards,
> Bjorn
>
>> + RGMII_IO_MACRO_CONFIG);
>> break;
>> }
>>
>> --
>> 2.17.1
>>
>>

2023-12-11 10:00:46

by Serge Semin

[permalink] [raw]
Subject: Re: [PATCH net v3] net: stmmac: update Rx clk divider for 10M SGMII

On Fri, Dec 08, 2023 at 11:55:02AM +0530, Sneh Shah wrote:
> SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
> Update configure SGMII function with rx clk divider programming.

One more time:

> [PATCH v3] net: stmmac: update Rx clk divider for 10M SGMII

It would be better to add "dwmac-qcom-ethqos" prefix to the subject
since the patch concerns the Qualcomm Eth MAC only. This time don't
forget to do that on v4.

-Serge(y)

>
> Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
> Signed-off-by: Sneh Shah <[email protected]>
> ---
> v3 changelog:
> - Added comment to explain why MAC needs to be reconfigured for SGMII
> v2 changelog:
> - Use FIELD_PREP to prepare bifield values in place of GENMASK
> - Add fixes tag
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index d3bf42d0fceb..ab2245995bc6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -34,6 +34,7 @@
> #define RGMII_CONFIG_LOOPBACK_EN BIT(2)
> #define RGMII_CONFIG_PROG_SWAP BIT(1)
> #define RGMII_CONFIG_DDR_MODE BIT(0)
> +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)
>
> /* SDCC_HC_REG_DLL_CONFIG fields */
> #define SDCC_DLL_CONFIG_DLL_RST BIT(30)
> @@ -598,6 +599,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
> return 0;
> }
>
> +/* On interface toggle MAC registetrs gets reset.
> + * Configure MAC block for SGMII on ethernet phy link up
> + */
> static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> {
> int val;
> @@ -617,6 +621,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> case SPEED_10:
> val |= ETHQOS_MAC_CTRL_PORT_SEL;
> val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
> + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
> + FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),
> + RGMII_IO_MACRO_CONFIG);
> break;
> }
>
> --
> 2.17.1
>
>