When built-in to the kernel, the corsair-psu driver fails to register with
the following message:
"Driver 'corsair-psu' was unable to register with bus_type 'hid'
because the bus was not initialized."
Fix this by initializing the driver after the HID bus using
late_initcall(), as hwmon is built before HID.
Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
Signed-off-by: Aleksa Savic <[email protected]>
---
drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index 904890598c11..48831a528965 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
.reset_resume = corsairpsu_resume,
#endif
};
-module_hid_driver(corsairpsu_driver);
+
+static int __init corsairpsu_hid_init(void)
+{
+ return hid_register_driver(&corsairpsu_driver);
+}
+
+static void __exit corsairpsu_hid_exit(void)
+{
+ hid_unregister_driver(&corsairpsu_driver);
+}
+
+/* When compiled into the kernel, initialize after the hid bus */
+late_initcall(corsairpsu_hid_init);
+module_exit(corsairpsu_hid_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Wilken Gottwalt <[email protected]>");
--
2.43.0
On 2023-12-08 14:07:10 GMT+01:00, Aleksa Savic wrote:
> When built-in to the kernel, the corsair-psu driver fails to register with
> the following message:
>
> "Driver 'corsair-psu' was unable to register with bus_type 'hid'
> because the bus was not initialized."
>
> Fix this by initializing the driver after the HID bus using
> late_initcall(), as hwmon is built before HID.
>
> Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
> Signed-off-by: Aleksa Savic <[email protected]>
> ---
> drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> index 904890598c11..48831a528965 100644
> --- a/drivers/hwmon/corsair-psu.c
> +++ b/drivers/hwmon/corsair-psu.c
> @@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
> .reset_resume = corsairpsu_resume,
> #endif
> };
> -module_hid_driver(corsairpsu_driver);
> +
> +static int __init corsairpsu_hid_init(void)
> +{
> + return hid_register_driver(&corsairpsu_driver);
> +}
> +
> +static void __exit corsairpsu_hid_exit(void)
> +{
> + hid_unregister_driver(&corsairpsu_driver);
> +}
> +
> +/* When compiled into the kernel, initialize after the hid bus */
> +late_initcall(corsairpsu_hid_init);
> +module_exit(corsairpsu_hid_exit);
>
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Wilken Gottwalt <[email protected]>");
Woops! Just saw that the same fix was sent yesterday. Please disregard, sorry!
Aleksa
On Fri, 8 Dec 2023 14:11:44 +0100
Aleksa Savic <[email protected]> wrote:
> On 2023-12-08 14:07:10 GMT+01:00, Aleksa Savic wrote:
> > When built-in to the kernel, the corsair-psu driver fails to register with
> > the following message:
> >
> > "Driver 'corsair-psu' was unable to register with bus_type 'hid'
> > because the bus was not initialized."
> >
> > Fix this by initializing the driver after the HID bus using
> > late_initcall(), as hwmon is built before HID.
> >
> > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
> > Signed-off-by: Aleksa Savic <[email protected]>
> > ---
> > drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
> > 1 file changed, 14 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> > index 904890598c11..48831a528965 100644
> > --- a/drivers/hwmon/corsair-psu.c
> > +++ b/drivers/hwmon/corsair-psu.c
> > @@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
> > .reset_resume = corsairpsu_resume,
> > #endif
> > };
> > -module_hid_driver(corsairpsu_driver);
> > +
> > +static int __init corsairpsu_hid_init(void)
> > +{
> > + return hid_register_driver(&corsairpsu_driver);
> > +}
> > +
> > +static void __exit corsairpsu_hid_exit(void)
> > +{
> > + hid_unregister_driver(&corsairpsu_driver);
> > +}
> > +
> > +/* When compiled into the kernel, initialize after the hid bus */
> > +late_initcall(corsairpsu_hid_init);
> > +module_exit(corsairpsu_hid_exit);
> >
> > MODULE_LICENSE("GPL");
> > MODULE_AUTHOR("Wilken Gottwalt <[email protected]>");
>
>
> Woops! Just saw that the same fix was sent yesterday. Please disregard, sorry!
>
> Aleksa
It is fine. I just start to wonder if there was a change in the subsystem. I
used the driver as built-in in the past for several months and never had that
issue. And now it is a real flood of reports.
greetings,
Will
On 12/8/23 05:57, Wilken Gottwalt wrote:
> On Fri, 8 Dec 2023 14:11:44 +0100
> Aleksa Savic <[email protected]> wrote:
>
>> On 2023-12-08 14:07:10 GMT+01:00, Aleksa Savic wrote:
>>> When built-in to the kernel, the corsair-psu driver fails to register with
>>> the following message:
>>>
>>> "Driver 'corsair-psu' was unable to register with bus_type 'hid'
>>> because the bus was not initialized."
>>>
>>> Fix this by initializing the driver after the HID bus using
>>> late_initcall(), as hwmon is built before HID.
>>>
>>> Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
>>> Signed-off-by: Aleksa Savic <[email protected]>
>>> ---
>>> drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
>>> 1 file changed, 14 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
>>> index 904890598c11..48831a528965 100644
>>> --- a/drivers/hwmon/corsair-psu.c
>>> +++ b/drivers/hwmon/corsair-psu.c
>>> @@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
>>> .reset_resume = corsairpsu_resume,
>>> #endif
>>> };
>>> -module_hid_driver(corsairpsu_driver);
>>> +
>>> +static int __init corsairpsu_hid_init(void)
>>> +{
>>> + return hid_register_driver(&corsairpsu_driver);
>>> +}
>>> +
>>> +static void __exit corsairpsu_hid_exit(void)
>>> +{
>>> + hid_unregister_driver(&corsairpsu_driver);
>>> +}
>>> +
>>> +/* When compiled into the kernel, initialize after the hid bus */
>>> +late_initcall(corsairpsu_hid_init);
>>> +module_exit(corsairpsu_hid_exit);
>>>
>>> MODULE_LICENSE("GPL");
>>> MODULE_AUTHOR("Wilken Gottwalt <[email protected]>");
>>
>>
>> Woops! Just saw that the same fix was sent yesterday. Please disregard, sorry!
>>
>> Aleksa
>
> It is fine. I just start to wonder if there was a change in the subsystem. I
> used the driver as built-in in the past for several months and never had that
> issue. And now it is a real flood of reports.
>
Maybe there was a change in the build order, or some subtle change
in driver registration code. Question though is _when_ this changed.
It would be great if someone could bisect it. For example, bus registration
code has been changed significantly in v6.3. I am copying linux-input
and the hid maintainers for feedback.
Either case, I now have two patches and at least the first one was actually
tested, but no Reviewed-by: or Tested-by: for either of them. While that is
of course a formality, it would still be useful to show that it is not just
a random change.
Thanks,
Guenter
On 2023-12-08 16:43:07 GMT+01:00, Guenter Roeck wrote:
> On 12/8/23 05:57, Wilken Gottwalt wrote:
>> On Fri, 8 Dec 2023 14:11:44 +0100
>> Aleksa Savic <[email protected]> wrote:
>>
>>> On 2023-12-08 14:07:10 GMT+01:00, Aleksa Savic wrote:
>>>> When built-in to the kernel, the corsair-psu driver fails to register with
>>>> the following message:
>>>>
>>>> "Driver 'corsair-psu' was unable to register with bus_type 'hid'
>>>> because the bus was not initialized."
>>>>
>>>> Fix this by initializing the driver after the HID bus using
>>>> late_initcall(), as hwmon is built before HID.
>>>>
>>>> Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
>>>> Signed-off-by: Aleksa Savic <[email protected]>
>>>> ---
>>>> drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
>>>> 1 file changed, 14 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
>>>> index 904890598c11..48831a528965 100644
>>>> --- a/drivers/hwmon/corsair-psu.c
>>>> +++ b/drivers/hwmon/corsair-psu.c
>>>> @@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
>>>> .reset_resume = corsairpsu_resume,
>>>> #endif
>>>> };
>>>> -module_hid_driver(corsairpsu_driver);
>>>> +
>>>> +static int __init corsairpsu_hid_init(void)
>>>> +{
>>>> + return hid_register_driver(&corsairpsu_driver);
>>>> +}
>>>> +
>>>> +static void __exit corsairpsu_hid_exit(void)
>>>> +{
>>>> + hid_unregister_driver(&corsairpsu_driver);
>>>> +}
>>>> +
>>>> +/* When compiled into the kernel, initialize after the hid bus */
>>>> +late_initcall(corsairpsu_hid_init);
>>>> +module_exit(corsairpsu_hid_exit);
>>>> MODULE_LICENSE("GPL");
>>>> MODULE_AUTHOR("Wilken Gottwalt <[email protected]>");
>>>
>>>
>>> Woops! Just saw that the same fix was sent yesterday. Please disregard, sorry!
>>>
>>> Aleksa
>>
>> It is fine. I just start to wonder if there was a change in the subsystem. I
>> used the driver as built-in in the past for several months and never had that
>> issue. And now it is a real flood of reports.
>>
>
> Maybe there was a change in the build order, or some subtle change
> in driver registration code. Question though is _when_ this changed.
> It would be great if someone could bisect it. For example, bus registration
> code has been changed significantly in v6.3. I am copying linux-input
> and the hid maintainers for feedback.
The late_initcall() was also needed in 2020. when corsair-cpro was added in
40c3a4454225 ("hwmon: add Corsair Commander Pro driver").
There was also discussion on the list about it:
https://lore.kernel.org/all/3864498.z6qT3ff8q6@marius/
nzxt-smart2 (from the tail of 2021.) also has a comment about the message.
(Just providing references.)
Aleksa
>
> Either case, I now have two patches and at least the first one was actually
> tested, but no Reviewed-by: or Tested-by: for either of them. While that is
> of course a formality, it would still be useful to show that it is not just
> a random change.
>
> Thanks,
> Guenter
>
On 12/8/23 08:52, Aleksa Savic wrote:
> On 2023-12-08 16:43:07 GMT+01:00, Guenter Roeck wrote:
>> On 12/8/23 05:57, Wilken Gottwalt wrote:
>>> On Fri, 8 Dec 2023 14:11:44 +0100
>>> Aleksa Savic <[email protected]> wrote:
>>>
>>>> On 2023-12-08 14:07:10 GMT+01:00, Aleksa Savic wrote:
>>>>> When built-in to the kernel, the corsair-psu driver fails to register with
>>>>> the following message:
>>>>>
>>>>> "Driver 'corsair-psu' was unable to register with bus_type 'hid'
>>>>> because the bus was not initialized."
>>>>>
>>>>> Fix this by initializing the driver after the HID bus using
>>>>> late_initcall(), as hwmon is built before HID.
>>>>>
>>>>> Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
>>>>> Signed-off-by: Aleksa Savic <[email protected]>
>>>>> ---
>>>>> drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
>>>>> 1 file changed, 14 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
>>>>> index 904890598c11..48831a528965 100644
>>>>> --- a/drivers/hwmon/corsair-psu.c
>>>>> +++ b/drivers/hwmon/corsair-psu.c
>>>>> @@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
>>>>> .reset_resume = corsairpsu_resume,
>>>>> #endif
>>>>> };
>>>>> -module_hid_driver(corsairpsu_driver);
>>>>> +
>>>>> +static int __init corsairpsu_hid_init(void)
>>>>> +{
>>>>> + return hid_register_driver(&corsairpsu_driver);
>>>>> +}
>>>>> +
>>>>> +static void __exit corsairpsu_hid_exit(void)
>>>>> +{
>>>>> + hid_unregister_driver(&corsairpsu_driver);
>>>>> +}
>>>>> +
>>>>> +/* When compiled into the kernel, initialize after the hid bus */
>>>>> +late_initcall(corsairpsu_hid_init);
>>>>> +module_exit(corsairpsu_hid_exit);
>>>>> MODULE_LICENSE("GPL");
>>>>> MODULE_AUTHOR("Wilken Gottwalt <[email protected]>");
>>>>
>>>>
>>>> Woops! Just saw that the same fix was sent yesterday. Please disregard, sorry!
>>>>
>>>> Aleksa
>>>
>>> It is fine. I just start to wonder if there was a change in the subsystem. I
>>> used the driver as built-in in the past for several months and never had that
>>> issue. And now it is a real flood of reports.
>>>
>>
>> Maybe there was a change in the build order, or some subtle change
>> in driver registration code. Question though is _when_ this changed.
>> It would be great if someone could bisect it. For example, bus registration
>> code has been changed significantly in v6.3. I am copying linux-input
>> and the hid maintainers for feedback.
>
> The late_initcall() was also needed in 2020. when corsair-cpro was added in
> 40c3a4454225 ("hwmon: add Corsair Commander Pro driver").
>
> There was also discussion on the list about it:
>
> https://lore.kernel.org/all/3864498.z6qT3ff8q6@marius/
>
> nzxt-smart2 (from the tail of 2021.) also has a comment about the message.
>
> (Just providing references.)
>
Ah yes, thanks for the reminder. We actually had a similar problem with
watchdog drivers and worked around it by deferring watchdog driver registration
until the watchdog core is initialized. That is of course just a kludge.
No idea if a clean(er) solution is even possible.
Guenter