From: Kieran Bingham <[email protected]>
Add the bindings for the supply references used on the IMX335.
Reviewed-by: Umang Jain <[email protected]>
Reviewed-by: Marco Felsch <[email protected]>
Signed-off-by: Kieran Bingham <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
.../devicetree/bindings/media/i2c/sony,imx335.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index a167dcdb3a32..106c36ee966d 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -32,6 +32,15 @@ properties:
description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
maxItems: 1
+ avdd-supply:
+ description: Analog power supply (2.9V)
+
+ ovdd-supply:
+ description: Interface power supply (1.8V)
+
+ dvdd-supply:
+ description: Digital power supply (1.2V)
+
reset-gpios:
description: Reference to the GPIO connected to the XCLR pin, if any.
maxItems: 1
@@ -79,6 +88,10 @@ examples:
assigned-clock-parents = <&imx335_clk_parent>;
assigned-clock-rates = <24000000>;
+ avdd-supply = <&camera_vdda_2v9>;
+ ovdd-supply = <&camera_vddo_1v8>;
+ dvdd-supply = <&camera_vddd_1v2>;
+
port {
imx335: endpoint {
remote-endpoint = <&cam>;
--
2.41.0