Hi,
this series adds initial support for the TQMLX2160A SoM on MBLX2160a
baseboard. The various supported Serdes Configurations are added with
overlay files.
Patch 1 adds the compatible to dt bindings
Patch 2 adds the dts files
---
Gregor Herburger (2):
dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
arm64: dts: freescale: add fsl-lx2160a-mblx2160a board
Documentation/devicetree/bindings/arm/fsl.yaml | 10 +
arch/arm64/boot/dts/freescale/Makefile | 26 ++
.../freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts | 338 +++++++++++++++++++++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso | 29 ++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso | 17 ++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso | 49 +++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso | 55 ++++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso | 47 +++
.../boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi | 97 ++++++
9 files changed, 668 insertions(+)
---
base-commit: 8728c14129df7a6e29188a2e737b4774fb200953
change-id: 20231206-for-ml-tqmlx2160a-68ee235f71cd
Best regards,
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/
Add the different serdes configurations as overlays.
Signed-off-by: Gregor Herburger <[email protected]>
---
arch/arm64/boot/dts/freescale/Makefile | 26 ++
.../freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts | 338 +++++++++++++++++++++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso | 29 ++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso | 17 ++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso | 49 +++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso | 55 ++++
.../fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso | 47 +++
.../boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi | 97 ++++++
8 files changed, 658 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 300049037eb0..cc30e6dc9f64 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -53,6 +53,32 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+ fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 000000000000..da0f58e26b9a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+ model = "TQ Systems GmbH MBLX2160A Starterkit";
+ compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+ "fsl,lx2160a";
+
+ aliases {
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-user1 {
+ label = "button:user1";
+ gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F1>;
+ };
+
+ button-user2 {
+ label = "button:user2";
+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-user1 {
+ gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-user2 {
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sfp_xfi1: sfp-xfi1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&xfi1_i2c>;
+ mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ sfp_xfi2: sfp-xfi2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&xfi2_i2c>;
+ mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&dpmac17 {
+ phy-handle = <&dp83867_2_3>;
+ phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+ phy-handle = <&dp83867_2_4>;
+ phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+ status = "okay";
+
+ dp83867_1_1: ethernet-phy@1 {
+ reg = <1>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_2: ethernet-phy@2 {
+ reg = <2>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_3: ethernet-phy@3 {
+ reg = <3>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_4: ethernet-phy@4 {
+ reg = <4>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_5: ethernet-phy@5 {
+ reg = <5>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_6: ethernet-phy@6 {
+ reg = <6>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+};
+
+&emdio2 {
+ status = "okay";
+
+ dp83867_2_1: ethernet-phy@1 {
+ reg = <1>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_2_2: ethernet-phy@2 {
+ reg = <2>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_2_3: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_2_4: ethernet-phy@4 {
+ reg = <4>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ no-mmc;
+ no-sdio;
+ wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c0 {
+ gpioex3: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ mux@70 {
+ compatible = "nxp,pca9544";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdd-supply = <®_vcc3v3>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpioex0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ gpioex1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ gpioex2: gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ mux@70 {
+ compatible = "nxp,pca9544";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdd-supply = <®_vcc3v3>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ xfi1_i2c: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ xfi2_i2c: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&pcs_mdio17 {
+ status = "okay";
+};
+
+&pcs_mdio18 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_2_0: hub@1 {
+ compatible = "usb451,8142";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb451,8140";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 000000000000..8284a564e20d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+ phy-handle = <&dp83867_2_1>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac10 {
+ phy-handle = <&dp83867_2_2>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+ status = "okay";
+};
+
+&pcs_mdio10 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 000000000000..636b17a383ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+ managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 000000000000..6d0c808cd840
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+ phy-handle = <&dp83867_1_1>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac13 {
+ phy-handle = <&dp83867_1_5>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac14 {
+ phy-handle = <&dp83867_1_6>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac16 {
+ phy-handle = <&dp83867_1_4>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+ status = "okay";
+};
+
+&pcs_mdio13 {
+ status = "okay";
+};
+
+&pcs_mdio14 {
+ status = "okay";
+};
+
+&pcs_mdio16 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 000000000000..db88a86ff69c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+ phy-handle = <&dp83867_1_1>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac13 {
+ sfp = <&sfp_xfi1>;
+ managed = "in-band-status";
+};
+
+&dpmac14 {
+ sfp = <&sfp_xfi2>;
+ managed = "in-band-status";
+};
+
+&dpmac16 {
+ phy-handle = <&dp83867_1_4>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+ status = "okay";
+};
+
+&pcs_mdio13 {
+ status = "okay";
+};
+
+&pcs_mdio14 {
+ status = "okay";
+};
+
+&pcs_mdio16 {
+ status = "okay";
+};
+
+&sfp_xfi1 {
+ status = "okay";
+};
+
+&sfp_xfi2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 000000000000..f6dfa76aa0e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+ sfp = <&sfp_xfi1>;
+ managed = "in-band-status";
+};
+
+&dpmac14 {
+ sfp = <&sfp_xfi2>;
+ managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+ status = "okay";
+};
+
+&pcs_mdio14 {
+ status = "okay";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sfp_xfi1 {
+ status = "okay";
+};
+
+&sfp_xfi2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 000000000000..89a4765737b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <[email protected]>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+
+&emdio1 {
+ status = "okay";
+};
+
+&emdio2 {
+ status = "okay";
+};
+
+&esdhc1 {
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&fspi {
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <10000000>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <10000000>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&i2c0 {
+ scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ sensor0: temperature-sensor@1f {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1f>;
+ };
+
+ eeprom1: eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <12500>;
+ };
+
+ eeprom2: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
--
2.34.1
Hi,
Am Mittwoch, 6. Dezember 2023, 15:01:00 CET schrieb Gregor Herburger:
> Hi,
>
> this series adds initial support for the TQMLX2160A SoM on MBLX2160a
> baseboard. The various supported Serdes Configurations are added with
> overlay files.
>
> Patch 1 adds the compatible to dt bindings
> Patch 2 adds the dts files
>
> ---
> Gregor Herburger (2):
> dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
> arm64: dts: freescale: add fsl-lx2160a-mblx2160a board
For the whole series:
Reviewed-by: Alexander Stein <[email protected]>
> Documentation/devicetree/bindings/arm/fsl.yaml | 10 +
> arch/arm64/boot/dts/freescale/Makefile | 26 ++
> .../freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts | 338
> +++++++++++++++++++++ .../fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso |
> 29 ++
> .../fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso | 17 ++
> .../fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso | 49 +++
> .../fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso | 55 ++++
> .../fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso | 47 +++
> .../boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi | 97 ++++++
> 9 files changed, 668 insertions(+)
> ---
> base-commit: 8728c14129df7a6e29188a2e737b4774fb200953
> change-id: 20231206-for-ml-tqmlx2160a-68ee235f71cd
>
> Best regards,
--
TQ-Systems GmbH | M?hlstra?e 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht M?nchen, HRB 105018
Gesch?ftsf?hrer: Detlef Schneider, R?diger Stahl, Stefan Schneider
http://www.tq-group.com/
On Wed, Dec 06, 2023 at 03:01:00PM +0100, Gregor Herburger wrote:
> Hi,
>
> this series adds initial support for the TQMLX2160A SoM on MBLX2160a
> baseboard. The various supported Serdes Configurations are added with
> overlay files.
>
> Patch 1 adds the compatible to dt bindings
> Patch 2 adds the dts files
>
> ---
> Gregor Herburger (2):
> dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
> arm64: dts: freescale: add fsl-lx2160a-mblx2160a board
Applied both, thanks!