The function phydev_id_is_qca808x is applicable to the
PHY qca8081 and qca8084.
Signed-off-by: Luo Jie <[email protected]>
---
drivers/net/phy/at803x.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 8dfdf2ff56a5..143f0d2e36a6 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1165,6 +1165,12 @@ static void at803x_link_change_notify(struct phy_device *phydev)
}
}
+static bool phydev_id_is_qca808x(struct phy_device *phydev)
+{
+ return phydev_id_compare(phydev, QCA8081_PHY_ID) ||
+ phydev_id_compare(phydev, QCA8084_PHY_ID);
+}
+
static int at803x_read_specific_status(struct phy_device *phydev)
{
int ss;
@@ -1184,8 +1190,8 @@ static int at803x_read_specific_status(struct phy_device *phydev)
if (sfc < 0)
return sfc;
- /* qca8081 takes the different bits for speed value from at803x */
- if (phydev->drv->phy_id == QCA8081_PHY_ID)
+ /* qca808x takes the different bits for speed value from at803x */
+ if (phydev_id_is_qca808x(phydev))
speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss);
else
speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss);
@@ -1316,7 +1322,7 @@ static int at803x_config_aneg(struct phy_device *phydev)
*/
ret = 0;
- if (phydev->drv->phy_id == QCA8081_PHY_ID) {
+ if (phydev_id_is_qca808x(phydev)) {
int phy_ctrl = 0;
/* The reg MII_BMCR also needs to be configured for force mode, the
@@ -1470,8 +1476,8 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
{
u16 cdt;
- /* qca8081 takes the different bit 15 to enable CDT test */
- if (phydev->drv->phy_id == QCA8081_PHY_ID)
+ /* qca808x takes the different bit 15 to enable CDT test */
+ if (phydev_id_is_qca808x(phydev))
cdt = QCA808X_CDT_ENABLE_TEST |
QCA808X_CDT_LENGTH_UNIT |
QCA808X_CDT_INTER_CHECK_DIS;
@@ -1487,7 +1493,7 @@ static int at803x_cdt_wait_for_completion(struct phy_device *phydev)
int val, ret;
u16 cdt_en;
- if (phydev->drv->phy_id == QCA8081_PHY_ID)
+ if (phydev_id_is_qca808x(phydev))
cdt_en = QCA808X_CDT_ENABLE_TEST;
else
cdt_en = AT803X_CDT_ENABLE_TEST;
--
2.42.0