fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such.
Use matching property syntax and allow correct validation.
No functional changes.
Signed-off-by: David Heidelberg <[email protected]>
---
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 79 ++++++++---------
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 87 ++++++++++---------
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 81 ++++++++---------
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 74 ++++++++--------
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 74 ++++++++--------
.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 73 ++++++++--------
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 +-
7 files changed, 238 insertions(+), 234 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index d0733451d3ce..1e3fe3897b52 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -307,45 +307,46 @@ tmu: tmu@1f00000 {
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
- fsl,tmu-calibration = <0x00000000 0x00000025
- 0x00000001 0x0000002c
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004c
- 0x00000007 0x00000053
- 0x00000008 0x00000059
- 0x00000009 0x0000005f
- 0x0000000a 0x00000066
- 0x0000000b 0x0000006c
-
- 0x00010000 0x00000026
- 0x00010001 0x0000002d
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004d
- 0x00010006 0x00000055
- 0x00010007 0x0000005d
- 0x00010008 0x00000065
- 0x00010009 0x0000006d
-
- 0x00020000 0x00000026
- 0x00020001 0x00000030
- 0x00020002 0x0000003a
- 0x00020003 0x00000044
- 0x00020004 0x0000004e
- 0x00020005 0x00000059
- 0x00020006 0x00000063
-
- 0x00030000 0x00000014
- 0x00030001 0x00000021
- 0x00030002 0x0000002e
- 0x00030003 0x0000003a
- 0x00030004 0x00000047
- 0x00030005 0x00000053
- 0x00030006 0x00000060>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000025>,
+ <0x00000001 0x0000002c>,
+ <0x00000002 0x00000032>,
+ <0x00000003 0x00000039>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000046>,
+ <0x00000006 0x0000004c>,
+ <0x00000007 0x00000053>,
+ <0x00000008 0x00000059>,
+ <0x00000009 0x0000005f>,
+ <0x0000000a 0x00000066>,
+ <0x0000000b 0x0000006c>,
+
+ <0x00010000 0x00000026>,
+ <0x00010001 0x0000002d>,
+ <0x00010002 0x00000035>,
+ <0x00010003 0x0000003d>,
+ <0x00010004 0x00000045>,
+ <0x00010005 0x0000004d>,
+ <0x00010006 0x00000055>,
+ <0x00010007 0x0000005d>,
+ <0x00010008 0x00000065>,
+ <0x00010009 0x0000006d>,
+
+ <0x00020000 0x00000026>,
+ <0x00020001 0x00000030>,
+ <0x00020002 0x0000003a>,
+ <0x00020003 0x00000044>,
+ <0x00020004 0x0000004e>,
+ <0x00020005 0x00000059>,
+ <0x00020006 0x00000063>,
+
+ <0x00030000 0x00000014>,
+ <0x00030001 0x00000021>,
+ <0x00030002 0x0000002e>,
+ <0x00030003 0x0000003a>,
+ <0x00030004 0x00000047>,
+ <0x00030005 0x00000053>,
+ <0x00030006 0x00000060>;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eefe3577d94e..ae534c23b970 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1026,49 +1026,50 @@ tmu: tmu@1f80000 {
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
- fsl,tmu-calibration = <0x00000000 0x00000024
- 0x00000001 0x0000002b
- 0x00000002 0x00000031
- 0x00000003 0x00000038
- 0x00000004 0x0000003f
- 0x00000005 0x00000045
- 0x00000006 0x0000004c
- 0x00000007 0x00000053
- 0x00000008 0x00000059
- 0x00000009 0x00000060
- 0x0000000a 0x00000066
- 0x0000000b 0x0000006d
-
- 0x00010000 0x0000001c
- 0x00010001 0x00000024
- 0x00010002 0x0000002c
- 0x00010003 0x00000035
- 0x00010004 0x0000003d
- 0x00010005 0x00000045
- 0x00010006 0x0000004d
- 0x00010007 0x00000055
- 0x00010008 0x0000005e
- 0x00010009 0x00000066
- 0x0001000a 0x0000006e
-
- 0x00020000 0x00000018
- 0x00020001 0x00000022
- 0x00020002 0x0000002d
- 0x00020003 0x00000038
- 0x00020004 0x00000043
- 0x00020005 0x0000004d
- 0x00020006 0x00000058
- 0x00020007 0x00000063
- 0x00020008 0x0000006e
-
- 0x00030000 0x00000010
- 0x00030001 0x0000001c
- 0x00030002 0x00000029
- 0x00030003 0x00000036
- 0x00030004 0x00000042
- 0x00030005 0x0000004f
- 0x00030006 0x0000005b
- 0x00030007 0x00000068>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000024>,
+ <0x00000001 0x0000002b>,
+ <0x00000002 0x00000031>,
+ <0x00000003 0x00000038>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000045>,
+ <0x00000006 0x0000004c>,
+ <0x00000007 0x00000053>,
+ <0x00000008 0x00000059>,
+ <0x00000009 0x00000060>,
+ <0x0000000a 0x00000066>,
+ <0x0000000b 0x0000006d>,
+
+ <0x00010000 0x0000001c>,
+ <0x00010001 0x00000024>,
+ <0x00010002 0x0000002c>,
+ <0x00010003 0x00000035>,
+ <0x00010004 0x0000003d>,
+ <0x00010005 0x00000045>,
+ <0x00010006 0x0000004d>,
+ <0x00010007 0x00000055>,
+ <0x00010008 0x0000005e>,
+ <0x00010009 0x00000066>,
+ <0x0001000a 0x0000006e>,
+
+ <0x00020000 0x00000018>,
+ <0x00020001 0x00000022>,
+ <0x00020002 0x0000002d>,
+ <0x00020003 0x00000038>,
+ <0x00020004 0x00000043>,
+ <0x00020005 0x0000004d>,
+ <0x00020006 0x00000058>,
+ <0x00020007 0x00000063>,
+ <0x00020008 0x0000006e>,
+
+ <0x00030000 0x00000010>,
+ <0x00030001 0x0000001c>,
+ <0x00030002 0x00000029>,
+ <0x00030003 0x00000036>,
+ <0x00030004 0x00000042>,
+ <0x00030005 0x0000004f>,
+ <0x00030006 0x0000005b>,
+ <0x00030007 0x00000068>;
little-endian;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 229bb4bebe42..d333b773bc45 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -447,46 +447,47 @@ tmu: tmu@1f00000 {
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
- fsl,tmu-calibration = <0x00000000 0x00000023
- 0x00000001 0x0000002a
- 0x00000002 0x00000031
- 0x00000003 0x00000037
- 0x00000004 0x0000003e
- 0x00000005 0x00000044
- 0x00000006 0x0000004b
- 0x00000007 0x00000051
- 0x00000008 0x00000058
- 0x00000009 0x0000005e
- 0x0000000a 0x00000065
- 0x0000000b 0x0000006b
-
- 0x00010000 0x00000023
- 0x00010001 0x0000002b
- 0x00010002 0x00000033
- 0x00010003 0x0000003b
- 0x00010004 0x00000043
- 0x00010005 0x0000004b
- 0x00010006 0x00000054
- 0x00010007 0x0000005c
- 0x00010008 0x00000064
- 0x00010009 0x0000006c
-
- 0x00020000 0x00000021
- 0x00020001 0x0000002c
- 0x00020002 0x00000036
- 0x00020003 0x00000040
- 0x00020004 0x0000004b
- 0x00020005 0x00000055
- 0x00020006 0x0000005f
-
- 0x00030000 0x00000013
- 0x00030001 0x0000001d
- 0x00030002 0x00000028
- 0x00030003 0x00000032
- 0x00030004 0x0000003d
- 0x00030005 0x00000047
- 0x00030006 0x00000052
- 0x00030007 0x0000005c>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000023>,
+ <0x00000001 0x0000002a>,
+ <0x00000002 0x00000031>,
+ <0x00000003 0x00000037>,
+ <0x00000004 0x0000003e>,
+ <0x00000005 0x00000044>,
+ <0x00000006 0x0000004b>,
+ <0x00000007 0x00000051>,
+ <0x00000008 0x00000058>,
+ <0x00000009 0x0000005e>,
+ <0x0000000a 0x00000065>,
+ <0x0000000b 0x0000006b>,
+
+ <0x00010000 0x00000023>,
+ <0x00010001 0x0000002b>,
+ <0x00010002 0x00000033>,
+ <0x00010003 0x0000003b>,
+ <0x00010004 0x00000043>,
+ <0x00010005 0x0000004b>,
+ <0x00010006 0x00000054>,
+ <0x00010007 0x0000005c>,
+ <0x00010008 0x00000064>,
+ <0x00010009 0x0000006c>,
+
+ <0x00020000 0x00000021>,
+ <0x00020001 0x0000002c>,
+ <0x00020002 0x00000036>,
+ <0x00020003 0x00000040>,
+ <0x00020004 0x0000004b>,
+ <0x00020005 0x00000055>,
+ <0x00020006 0x0000005f>,
+
+ <0x00030000 0x00000013>,
+ <0x00030001 0x0000001d>,
+ <0x00030002 0x00000028>,
+ <0x00030003 0x00000032>,
+ <0x00030004 0x0000003d>,
+ <0x00030005 0x00000047>,
+ <0x00030006 0x00000052>,
+ <0x00030007 0x0000005c>;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 50f68ca5a9af..1515cec23147 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -445,46 +445,46 @@ tmu: tmu@1f00000 {
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000023
- 0x00000001 0x00000029
- 0x00000002 0x0000002f
- 0x00000003 0x00000036
- 0x00000004 0x0000003c
- 0x00000005 0x00000042
- 0x00000006 0x00000049
- 0x00000007 0x0000004f
- 0x00000008 0x00000055
- 0x00000009 0x0000005c
- 0x0000000a 0x00000062
- 0x0000000b 0x00000068
+ <0x00000000 0x00000023>,
+ <0x00000001 0x00000029>,
+ <0x00000002 0x0000002f>,
+ <0x00000003 0x00000036>,
+ <0x00000004 0x0000003c>,
+ <0x00000005 0x00000042>,
+ <0x00000006 0x00000049>,
+ <0x00000007 0x0000004f>,
+ <0x00000008 0x00000055>,
+ <0x00000009 0x0000005c>,
+ <0x0000000a 0x00000062>,
+ <0x0000000b 0x00000068>,
/* Calibration data group 2 */
- 0x00010000 0x00000022
- 0x00010001 0x0000002a
- 0x00010002 0x00000032
- 0x00010003 0x0000003a
- 0x00010004 0x00000042
- 0x00010005 0x0000004a
- 0x00010006 0x00000052
- 0x00010007 0x0000005a
- 0x00010008 0x00000062
- 0x00010009 0x0000006a
+ <0x00010000 0x00000022>,
+ <0x00010001 0x0000002a>,
+ <0x00010002 0x00000032>,
+ <0x00010003 0x0000003a>,
+ <0x00010004 0x00000042>,
+ <0x00010005 0x0000004a>,
+ <0x00010006 0x00000052>,
+ <0x00010007 0x0000005a>,
+ <0x00010008 0x00000062>,
+ <0x00010009 0x0000006a>,
/* Calibration data group 3 */
- 0x00020000 0x00000021
- 0x00020001 0x0000002b
- 0x00020002 0x00000035
- 0x00020003 0x0000003e
- 0x00020004 0x00000048
- 0x00020005 0x00000052
- 0x00020006 0x0000005c
+ <0x00020000 0x00000021>,
+ <0x00020001 0x0000002b>,
+ <0x00020002 0x00000035>,
+ <0x00020003 0x0000003e>,
+ <0x00020004 0x00000048>,
+ <0x00020005 0x00000052>,
+ <0x00020006 0x0000005c>,
/* Calibration data group 4 */
- 0x00030000 0x00000011
- 0x00030001 0x0000001a
- 0x00030002 0x00000024
- 0x00030003 0x0000002e
- 0x00030004 0x00000038
- 0x00030005 0x00000042
- 0x00030006 0x0000004c
- 0x00030007 0x00000056>;
+ <0x00030000 0x00000011>,
+ <0x00030001 0x0000001a>,
+ <0x00030002 0x00000024>,
+ <0x00030003 0x0000002e>,
+ <0x00030004 0x00000038>,
+ <0x00030005 0x00000042>,
+ <0x00030006 0x0000004c>,
+ <0x00030007 0x00000056>;
big-endian;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8f6090a9aef2..8616d5e0c388 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -284,46 +284,46 @@ tmu: tmu@1f80000 {
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000023
- 0x00000001 0x0000002a
- 0x00000002 0x00000030
- 0x00000003 0x00000037
- 0x00000004 0x0000003d
- 0x00000005 0x00000044
- 0x00000006 0x0000004a
- 0x00000007 0x00000051
- 0x00000008 0x00000057
- 0x00000009 0x0000005e
- 0x0000000a 0x00000064
- 0x0000000b 0x0000006b
+ <0x00000000 0x00000023>,
+ <0x00000001 0x0000002a>,
+ <0x00000002 0x00000030>,
+ <0x00000003 0x00000037>,
+ <0x00000004 0x0000003d>,
+ <0x00000005 0x00000044>,
+ <0x00000006 0x0000004a>,
+ <0x00000007 0x00000051>,
+ <0x00000008 0x00000057>,
+ <0x00000009 0x0000005e>,
+ <0x0000000a 0x00000064>,
+ <0x0000000b 0x0000006b>,
/* Calibration data group 2 */
- 0x00010000 0x00000022
- 0x00010001 0x0000002a
- 0x00010002 0x00000032
- 0x00010003 0x0000003a
- 0x00010004 0x00000042
- 0x00010005 0x0000004a
- 0x00010006 0x00000052
- 0x00010007 0x0000005a
- 0x00010008 0x00000062
- 0x00010009 0x0000006a
+ <0x00010000 0x00000022>,
+ <0x00010001 0x0000002a>,
+ <0x00010002 0x00000032>,
+ <0x00010003 0x0000003a>,
+ <0x00010004 0x00000042>,
+ <0x00010005 0x0000004a>,
+ <0x00010006 0x00000052>,
+ <0x00010007 0x0000005a>,
+ <0x00010008 0x00000062>,
+ <0x00010009 0x0000006a>,
/* Calibration data group 3 */
- 0x00020000 0x00000021
- 0x00020001 0x0000002b
- 0x00020002 0x00000035
- 0x00020003 0x00000040
- 0x00020004 0x0000004a
- 0x00020005 0x00000054
- 0x00020006 0x0000005e
+ <0x00020000 0x00000021>,
+ <0x00020001 0x0000002b>,
+ <0x00020002 0x00000035>,
+ <0x00020003 0x00000040>,
+ <0x00020004 0x0000004a>,
+ <0x00020005 0x00000054>,
+ <0x00020006 0x0000005e>,
/* Calibration data group 4 */
- 0x00030000 0x00000010
- 0x00030001 0x0000001c
- 0x00030002 0x00000027
- 0x00030003 0x00000032
- 0x00030004 0x0000003e
- 0x00030005 0x00000049
- 0x00030006 0x00000054
- 0x00030007 0x00000060>;
+ <0x00030000 0x00000010>,
+ <0x00030001 0x0000001c>,
+ <0x00030002 0x00000027>,
+ <0x00030003 0x00000032>,
+ <0x00030004 0x0000003e>,
+ <0x00030005 0x00000049>,
+ <0x00030006 0x00000054>,
+ <0x00030007 0x00000060>;
little-endian;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 717288bbdb8b..0b7292835906 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -321,42 +321,43 @@ tmu: tmu@1f80000 {
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000026>,
+ <0x00000001 0x0000002d>,
+ <0x00000002 0x00000032>,
+ <0x00000003 0x00000039>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000046>,
+ <0x00000006 0x0000004d>,
+ <0x00000007 0x00000054>,
+ <0x00000008 0x0000005a>,
+ <0x00000009 0x00000061>,
+ <0x0000000a 0x0000006a>,
+ <0x0000000b 0x00000071>,
+
+ <0x00010000 0x00000025>,
+ <0x00010001 0x0000002c>,
+ <0x00010002 0x00000035>,
+ <0x00010003 0x0000003d>,
+ <0x00010004 0x00000045>,
+ <0x00010005 0x0000004e>,
+ <0x00010006 0x00000057>,
+ <0x00010007 0x00000061>,
+ <0x00010008 0x0000006b>,
+ <0x00010009 0x00000076>,
+
+ <0x00020000 0x00000029>,
+ <0x00020001 0x00000033>,
+ <0x00020002 0x0000003d>,
+ <0x00020003 0x00000049>,
+ <0x00020004 0x00000056>,
+ <0x00020005 0x00000061>,
+ <0x00020006 0x0000006d>,
+
+ <0x00030000 0x00000021>,
+ <0x00030001 0x0000002a>,
+ <0x00030002 0x0000003c>,
+ <0x00030003 0x0000004e>;
little-endian;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index f176ca2e244e..6640b49670ae 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -732,9 +732,9 @@ tmu: tmu@1f80000 {
fsl,tmu-range = <0x800000e6 0x8001017d>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000035
+ <0x00000000 0x00000035>,
/* Calibration data group 2 */
- 0x00000001 0x00000154>;
+ <0x00000001 0x00000154>;
little-endian;
#thermal-sensor-cells = <1>;
};
--
2.43.0
On Sat, Dec 16, 2023 at 12:07:35AM +0100, David Heidelberg wrote:
> fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such.
>
> Use matching property syntax and allow correct validation.
>
> No functional changes.
>
> Signed-off-by: David Heidelberg <[email protected]>
Applied, thanks!