To ensure that all fields (particularly CAL_L and CAL_L_RINGOSC) are
filled properly, use the correct prepare function for OLE PLLs.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/clk/qcom/dispcc-sm8550.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sm8550.c b/drivers/clk/qcom/dispcc-sm8550.c
index 0b8f0904b339..f96d8b81fd9a 100644
--- a/drivers/clk/qcom/dispcc-sm8550.c
+++ b/drivers/clk/qcom/dispcc-sm8550.c
@@ -1774,8 +1774,8 @@ static int disp_cc_sm8550_probe(struct platform_device *pdev)
goto err_put_rpm;
}
- clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
- clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+ clk_lucid_ole_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+ clk_lucid_ole_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
/* Enable clock gating for MDP clocks */
regmap_update_bits(regmap, DISP_CC_MISC_CMD, 0x10, 0x10);
--
2.43.0