From: Hugo Villeneuve <[email protected]>
Use preferred spi_get_device_match_data() instead of
device_get_match_data() and spi_get_device_id() to get the driver match
data.
Suggested-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hugo Villeneuve <[email protected]>
---
drivers/tty/serial/sc16is7xx.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 597280a5d0f3..8cbf54d0a16c 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1742,14 +1742,10 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
if (ret)
return ret;
- if (spi->dev.of_node) {
- devtype = device_get_match_data(&spi->dev);
- if (!devtype)
- return -ENODEV;
- } else {
- const struct spi_device_id *id_entry = spi_get_device_id(spi);
-
- devtype = (struct sc16is7xx_devtype *)id_entry->driver_data;
+ devtype = (struct sc16is7xx_devtype *)spi_get_device_match_data(spi);
+ if (!devtype) {
+ dev_err(&spi->dev, "Failed to match device\n");
+ return -ENODEV;
}
for (i = 0; i < devtype->nr_uart; i++) {
--
2.39.2
On Tue, Dec 19, 2023 at 12:18:50PM -0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <[email protected]>
>
> Use preferred spi_get_device_match_data() instead of
> device_get_match_data() and spi_get_device_id() to get the driver match
> data.
...
> + devtype = (struct sc16is7xx_devtype *)spi_get_device_match_data(spi);
Nice one, but drop the casting. (Yes, make sure the assignee is const. It might
require an additional change.)
> + if (!devtype) {
> + dev_err(&spi->dev, "Failed to match device\n");
> + return -ENODEV;
return dev_err_probe(...);
?
> }
--
With Best Regards,
Andy Shevchenko
On Wed, 20 Dec 2023 17:44:52 +0200
Andy Shevchenko <[email protected]> wrote:
> On Tue, Dec 19, 2023 at 12:18:50PM -0500, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <[email protected]>
> >
> > Use preferred spi_get_device_match_data() instead of
> > device_get_match_data() and spi_get_device_id() to get the driver match
> > data.
>
> ...
>
> > + devtype = (struct sc16is7xx_devtype *)spi_get_device_match_data(spi);
>
> Nice one, but drop the casting. (Yes, make sure the assignee is const. It might
> require an additional change.)
Done, devtype was already const.
>
> > + if (!devtype) {
> > + dev_err(&spi->dev, "Failed to match device\n");
> > + return -ENODEV;
>
> return dev_err_probe(...);
>
> ?
Yes, done for V2.
Also done the same two changes for the I2C part.
Hugo.