Add Quirks and driver properties for Dell models.
Driver properties are required since these models do not have _DSD.
Additionally, some laptops, including some of these, have an issue
with their BIOS which causes the SPI speed to be set too slow.
To ensure a decent performance for laptops with this slow speed,
disable firmware loading. Running without firmware results in lower
volume.
Changes since v1:
- Rebased onto for-linus
Stefan Binding (3):
ALSA: hda: cs35l41: Support additional Dell models without _DSD
ALSA: hda: cs35l41: Prevent firmware load if SPI speed too low
ALSA: hda/realtek: Add quirks for Dell models
sound/pci/hda/cs35l41_hda.c | 25 ++++++++--
sound/pci/hda/cs35l41_hda.h | 12 ++++-
sound/pci/hda/cs35l41_hda_i2c.c | 2 +-
sound/pci/hda/cs35l41_hda_property.c | 74 +++++++++++++++-------------
sound/pci/hda/cs35l41_hda_spi.c | 2 +-
sound/pci/hda/patch_realtek.c | 13 +++++
6 files changed, 87 insertions(+), 41 deletions(-)
--
2.34.1
These models use 2 or 4 CS35L41 amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Signed-off-by: Stefan Binding <[email protected]>
---
sound/pci/hda/patch_realtek.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c3a756528886..19040887ff67 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6956,6 +6956,11 @@ static void cs35l41_fixup_i2c_two(struct hda_codec *cdc, const struct hda_fixup
cs35l41_generic_fixup(cdc, action, "i2c", "CSC3551", 2);
}
+static void cs35l41_fixup_i2c_four(struct hda_codec *cdc, const struct hda_fixup *fix, int action)
+{
+ cs35l41_generic_fixup(cdc, action, "i2c", "CSC3551", 4);
+}
+
static void cs35l41_fixup_spi_two(struct hda_codec *codec, const struct hda_fixup *fix, int action)
{
cs35l41_generic_fixup(codec, action, "spi", "CSC3551", 2);
@@ -7441,6 +7446,7 @@ enum {
ALC287_FIXUP_LEGION_16ACHG6,
ALC287_FIXUP_CS35L41_I2C_2,
ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED,
+ ALC287_FIXUP_CS35L41_I2C_4,
ALC245_FIXUP_CS35L41_SPI_2,
ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED,
ALC245_FIXUP_CS35L41_SPI_4,
@@ -9427,6 +9433,10 @@ static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC285_FIXUP_HP_MUTE_LED,
},
+ [ALC287_FIXUP_CS35L41_I2C_4] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = cs35l41_fixup_i2c_four,
+ },
[ALC245_FIXUP_CS35L41_SPI_2] = {
.type = HDA_FIXUP_FUNC,
.v.func = cs35l41_fixup_spi_two,
@@ -9703,6 +9713,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0b19, "Dell XPS 15 9520", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x0b1a, "Dell Precision 5570", ALC289_FIXUP_DUAL_SPK),
+ SND_PCI_QUIRK(0x1028, 0x0b27, "Dell", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x1028, 0x0b28, "Dell", ALC245_FIXUP_CS35L41_SPI_2),
SND_PCI_QUIRK(0x1028, 0x0b37, "Dell Inspiron 16 Plus 7620 2-in-1", ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS),
SND_PCI_QUIRK(0x1028, 0x0b71, "Dell Inspiron 16 Plus 7620", ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS),
SND_PCI_QUIRK(0x1028, 0x0beb, "Dell XPS 15 9530 (2023)", ALC289_FIXUP_DELL_CS35L41_SPI_2),
@@ -9713,6 +9725,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x0c1c, "Dell Precision 3540", ALC236_FIXUP_DELL_DUAL_CODECS),
SND_PCI_QUIRK(0x1028, 0x0c1d, "Dell Precision 3440", ALC236_FIXUP_DELL_DUAL_CODECS),
SND_PCI_QUIRK(0x1028, 0x0c1e, "Dell Precision 3540", ALC236_FIXUP_DELL_DUAL_CODECS),
+ SND_PCI_QUIRK(0x1028, 0x0c4d, "Dell", ALC287_FIXUP_CS35L41_I2C_4),
SND_PCI_QUIRK(0x1028, 0x0cbd, "Dell Oasis 13 CS MTL-U", ALC289_FIXUP_DELL_CS35L41_SPI_2),
SND_PCI_QUIRK(0x1028, 0x0cbe, "Dell Oasis 13 2-IN-1 MTL-U", ALC289_FIXUP_DELL_CS35L41_SPI_2),
SND_PCI_QUIRK(0x1028, 0x0cbf, "Dell Oasis 13 Low Weight MTU-L", ALC289_FIXUP_DELL_CS35L41_SPI_2),
--
2.34.1
Add new model entries into configuration table.
Signed-off-by: Stefan Binding <[email protected]>
---
sound/pci/hda/cs35l41_hda_property.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 194e1179a253..5eab2de0d4bb 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -35,6 +35,10 @@ struct cs35l41_config {
};
static const struct cs35l41_config cs35l41_config_table[] = {
+ { "10280B27", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10280B28", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10280BEB", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
+ { "10280C4D", I2C, 4, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, CS35L41_LEFT, CS35L41_RIGHT }, 0, 1, -1, 1000, 4500, 24 },
/*
* Device 103C89C6 does have _DSD, however it is setup to use the wrong boost type.
* We can override the _DSD to correct the boost type here.
@@ -347,6 +351,10 @@ struct cs35l41_prop_model {
static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
{ "CLSA0100", NULL, lenovo_legion_no_acpi },
{ "CLSA0101", NULL, lenovo_legion_no_acpi },
+ { "CSC3551", "10280B27", generic_dsd_config },
+ { "CSC3551", "10280B28", generic_dsd_config },
+ { "CSC3551", "10280BEB", generic_dsd_config },
+ { "CSC3551", "10280C4D", generic_dsd_config },
{ "CSC3551", "103C89C6", generic_dsd_config },
{ "CSC3551", "104312AF", generic_dsd_config },
{ "CSC3551", "10431433", generic_dsd_config },
--
2.34.1
Some laptops without _DSD have the SPI speed set very low in the BIOS.
Since the SPI controller uses this speed as its max speed, the SPI
transactions are very slow. Firmware download writes to many registers,
and if the SPI speed is too slow, it can take a long time to download.
For this reason, disable firmware loading if the maximum SPI speed is
too low. Without Firmware, audio playback will work, but the volume
will be low to ensure safe operation of the CS35L41.
Signed-off-by: Stefan Binding <[email protected]>
---
sound/pci/hda/cs35l41_hda.c | 25 ++++++++--
sound/pci/hda/cs35l41_hda.h | 12 ++++-
sound/pci/hda/cs35l41_hda_i2c.c | 2 +-
sound/pci/hda/cs35l41_hda_property.c | 74 +++++++++++++---------------
sound/pci/hda/cs35l41_hda_spi.c | 2 +-
5 files changed, 70 insertions(+), 45 deletions(-)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 92ca2b3b6c92..d3fa6e136744 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -12,6 +12,7 @@
#include <sound/hda_codec.h>
#include <sound/soc.h>
#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
#include "hda_local.h"
#include "hda_auto_parser.h"
#include "hda_jack.h"
@@ -996,6 +997,11 @@ static int cs35l41_smart_amp(struct cs35l41_hda *cs35l41)
__be32 halo_sts;
int ret;
+ if (cs35l41->bypass_fw) {
+ dev_warn(cs35l41->dev, "Bypassing Firmware.\n");
+ return 0;
+ }
+
ret = cs35l41_init_dsp(cs35l41);
if (ret) {
dev_warn(cs35l41->dev, "Cannot Initialize Firmware. Error: %d\n", ret);
@@ -1588,6 +1594,7 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
u32 values[HDA_MAX_COMPONENTS];
struct acpi_device *adev;
struct device *physdev;
+ struct spi_device *spi;
const char *sub;
char *property;
size_t nval;
@@ -1610,7 +1617,7 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
ret = cs35l41_add_dsd_properties(cs35l41, physdev, id, hid);
if (!ret) {
dev_info(cs35l41->dev, "Using extra _DSD properties, bypassing _DSD in ACPI\n");
- goto put_physdev;
+ goto out;
}
property = "cirrus,dev-index";
@@ -1701,8 +1708,20 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
hw_cfg->bst_type = CS35L41_EXT_BOOST;
hw_cfg->valid = true;
+out:
put_device(physdev);
+ cs35l41->bypass_fw = false;
+ if (cs35l41->control_bus == SPI) {
+ spi = to_spi_device(cs35l41->dev);
+ if (spi->max_speed_hz < CS35L41_MAX_ACCEPTABLE_SPI_SPEED_HZ) {
+ dev_warn(cs35l41->dev,
+ "SPI speed is too slow to support firmware download: %d Hz.\n",
+ spi->max_speed_hz);
+ cs35l41->bypass_fw = true;
+ }
+ }
+
return 0;
err:
@@ -1711,14 +1730,13 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
hw_cfg->gpio1.valid = false;
hw_cfg->gpio2.valid = false;
acpi_dev_put(cs35l41->dacpi);
-put_physdev:
put_device(physdev);
return ret;
}
int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int irq,
- struct regmap *regmap)
+ struct regmap *regmap, enum control_bus control_bus)
{
unsigned int regid, reg_revid;
struct cs35l41_hda *cs35l41;
@@ -1737,6 +1755,7 @@ int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int i
cs35l41->dev = dev;
cs35l41->irq = irq;
cs35l41->regmap = regmap;
+ cs35l41->control_bus = control_bus;
dev_set_drvdata(dev, cs35l41);
ret = cs35l41_hda_read_acpi(cs35l41, device_name, id);
diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
index 3d925d677213..43d55292b327 100644
--- a/sound/pci/hda/cs35l41_hda.h
+++ b/sound/pci/hda/cs35l41_hda.h
@@ -20,6 +20,8 @@
#include <linux/firmware/cirrus/cs_dsp.h>
#include <linux/firmware/cirrus/wmfw.h>
+#define CS35L41_MAX_ACCEPTABLE_SPI_SPEED_HZ 1000000
+
struct cs35l41_amp_cal_data {
u32 calTarget[2];
u32 calTime[2];
@@ -46,6 +48,11 @@ enum cs35l41_hda_gpio_function {
CS35l41_SYNC,
};
+enum control_bus {
+ I2C,
+ SPI
+};
+
struct cs35l41_hda {
struct device *dev;
struct regmap *regmap;
@@ -74,6 +81,9 @@ struct cs35l41_hda {
struct cs_dsp cs_dsp;
struct acpi_device *dacpi;
bool mute_override;
+ enum control_bus control_bus;
+ bool bypass_fw;
+
};
enum halo_state {
@@ -85,7 +95,7 @@ enum halo_state {
extern const struct dev_pm_ops cs35l41_hda_pm_ops;
int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int irq,
- struct regmap *regmap);
+ struct regmap *regmap, enum control_bus control_bus);
void cs35l41_hda_remove(struct device *dev);
int cs35l41_get_speaker_id(struct device *dev, int amp_index, int num_amps, int fixed_gpio_id);
diff --git a/sound/pci/hda/cs35l41_hda_i2c.c b/sound/pci/hda/cs35l41_hda_i2c.c
index b44536fbba17..603e9bff3a71 100644
--- a/sound/pci/hda/cs35l41_hda_i2c.c
+++ b/sound/pci/hda/cs35l41_hda_i2c.c
@@ -30,7 +30,7 @@ static int cs35l41_hda_i2c_probe(struct i2c_client *clt)
return -ENODEV;
return cs35l41_hda_probe(&clt->dev, device_name, clt->addr, clt->irq,
- devm_regmap_init_i2c(clt, &cs35l41_regmap_i2c));
+ devm_regmap_init_i2c(clt, &cs35l41_regmap_i2c), I2C);
}
static void cs35l41_hda_i2c_remove(struct i2c_client *clt)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 5eab2de0d4bb..be2b01b596c2 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -16,10 +16,6 @@
struct cs35l41_config {
const char *ssid;
- enum {
- SPI,
- I2C
- } bus;
int num_amps;
enum {
INTERNAL,
@@ -35,46 +31,46 @@ struct cs35l41_config {
};
static const struct cs35l41_config cs35l41_config_table[] = {
- { "10280B27", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10280B28", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10280BEB", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
- { "10280C4D", I2C, 4, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, CS35L41_LEFT, CS35L41_RIGHT }, 0, 1, -1, 1000, 4500, 24 },
+ { "10280B27", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10280B28", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10280BEB", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
+ { "10280C4D", 4, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, CS35L41_LEFT, CS35L41_RIGHT }, 0, 1, -1, 1000, 4500, 24 },
/*
* Device 103C89C6 does have _DSD, however it is setup to use the wrong boost type.
* We can override the _DSD to correct the boost type here.
* Since this laptop has valid ACPI, we do not need to handle cs-gpios, since that already exists
* in the ACPI. The Reset GPIO is also valid, so we can use the Reset defined in _DSD.
*/
- { "103C89C6", SPI, 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 },
- { "104312AF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431433", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431463", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431473", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
- { "10431483", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
- { "10431493", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "104314D3", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "104314E3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431503", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431533", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431573", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431663", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
- { "104316D3", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
- { "104316F3", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
- { "104317F3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431863", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "104318D3", I2C, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
- { "10431C9F", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431CAF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431CCF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431CDF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431CEF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
- { "10431D1F", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431DA2", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
- { "10431E02", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
- { "10431EE2", I2C, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 },
- { "10431F12", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
- { "10431F1F", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
- { "10431F62", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
+ { "103C89C6", 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 },
+ { "104312AF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431433", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431463", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431473", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
+ { "10431483", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
+ { "10431493", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "104314D3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "104314E3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431503", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431533", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431573", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431663", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
+ { "104316D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
+ { "104316F3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
+ { "104317F3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431863", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "104318D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
+ { "10431C9F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431CAF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431CCF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431CDF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431CEF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
+ { "10431D1F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431DA2", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
+ { "10431E02", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
+ { "10431EE2", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 },
+ { "10431F12", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
+ { "10431F1F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
+ { "10431F62", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
{}
};
@@ -212,7 +208,7 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
"_DSD already exists.\n");
}
- if (cfg->bus == SPI) {
+ if (cs35l41->control_bus == SPI) {
cs35l41->index = id;
#if IS_ENABLED(CONFIG_SPI)
diff --git a/sound/pci/hda/cs35l41_hda_spi.c b/sound/pci/hda/cs35l41_hda_spi.c
index eb287aa5f782..b76c0dfd5fef 100644
--- a/sound/pci/hda/cs35l41_hda_spi.c
+++ b/sound/pci/hda/cs35l41_hda_spi.c
@@ -26,7 +26,7 @@ static int cs35l41_hda_spi_probe(struct spi_device *spi)
return -ENODEV;
return cs35l41_hda_probe(&spi->dev, device_name, spi_get_chipselect(spi, 0), spi->irq,
- devm_regmap_init_spi(spi, &cs35l41_regmap_spi));
+ devm_regmap_init_spi(spi, &cs35l41_regmap_spi), SPI);
}
static void cs35l41_hda_spi_remove(struct spi_device *spi)
--
2.34.1
On Thu, 21 Dec 2023 14:25:15 +0100,
Stefan Binding wrote:
>
> Add Quirks and driver properties for Dell models.
> Driver properties are required since these models do not have _DSD.
> Additionally, some laptops, including some of these, have an issue
> with their BIOS which causes the SPI speed to be set too slow.
> To ensure a decent performance for laptops with this slow speed,
> disable firmware loading. Running without firmware results in lower
> volume.
>
> Changes since v1:
> - Rebased onto for-linus
>
> Stefan Binding (3):
> ALSA: hda: cs35l41: Support additional Dell models without _DSD
> ALSA: hda: cs35l41: Prevent firmware load if SPI speed too low
> ALSA: hda/realtek: Add quirks for Dell models
Applied to topic/cs35l41 branch, which is merged to for-next (for
6.8).
thanks,
Takashi