From: Rafał Miłecki <[email protected]>
Use order described as preferred in DTS Coding Style. Mostly just move
"compatible", "reg" and "ranges" properties. In two nodes also move
vendor-prefixed props down.
Signed-off-by: Rafał Miłecki <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 67 ++++++++++++-----------
1 file changed, 34 insertions(+), 33 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index fc751e049953..23feeff881de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -27,34 +27,34 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
- device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
cpu1: cpu@1 {
- device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
cpu2: cpu@2 {
- device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x2>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
cpu3: cpu@3 {
- device_type = "cpu";
- enable-method = "psci";
compatible = "arm,cortex-a53";
reg = <0x3>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
};
@@ -131,22 +131,22 @@ timer {
};
soc {
- #address-cells = <2>;
- #size-cells = <2>;
compatible = "simple-bus";
ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- interrupt-controller;
reg = <0 0x0c000000 0 0x10000>, /* GICD */
<0 0x0c080000 0 0x80000>, /* GICR */
<0 0x0c400000 0 0x2000>, /* GICC */
<0 0x0c410000 0 0x1000>, /* GICH */
<0 0x0c420000 0 0x2000>; /* GICV */
+ interrupt-parent = <&gic>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
};
infracfg: infracfg@10001000 {
@@ -311,9 +311,9 @@ i2c0: i2c@11008000 {
spi0: spi@1100a000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x1100a000 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0 0x1100a000 0 0x100>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_MPLL_D2>,
<&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +325,9 @@ spi0: spi@1100a000 {
spi1: spi@1100b000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x1100b000 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0 0x1100b000 0 0x100>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_MPLL_D2>,
<&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -389,7 +389,6 @@ mmc0: mmc@11230000 {
};
thermal: thermal@1100c800 {
- #thermal-sensor-cells = <1>;
compatible = "mediatek,mt7986-thermal";
reg = <0 0x1100c800 0 0x800>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -397,30 +396,30 @@ thermal: thermal@1100c800 {
<&infracfg CLK_INFRA_ADC_26M_CK>,
<&infracfg CLK_INFRA_ADC_FRC_CK>;
clock-names = "therm", "auxadc", "adc_32k";
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
nvmem-cells = <&thermal_calibration>;
nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
};
pcie: pcie@11280000 {
compatible = "mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
+ reg = <0x00 0x11280000 0x00 0x4000>;
+ reg-names = "pcie-mac";
+ ranges = <0x82000000 0x00 0x20000000 0x00
+ 0x20000000 0x00 0x10000000>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
- reg = <0x00 0x11280000 0x00 0x4000>;
- reg-names = "pcie-mac";
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0x00 0x20000000 0x00
- 0x20000000 0x00 0x10000000>;
clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
<&infracfg CLK_INFRA_IPCIE_CK>,
<&infracfg CLK_INFRA_IPCIER_CK>,
<&infracfg CLK_INFRA_IPCIEB_CK>;
clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
- status = "disabled";
phys = <&pcie_port PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
@@ -431,6 +430,8 @@ pcie: pcie@11280000 {
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ status = "disabled";
+
pcie_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -441,9 +442,9 @@ pcie_intc: interrupt-controller {
pcie_phy: t-phy {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
status = "disabled";
pcie_port: pcie-phy@11c00000 {
@@ -468,9 +469,9 @@ thermal_calibration: calib@274 {
usb_phy: t-phy@11e10000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
+ ranges = <0 0 0x11e10000 0x1700>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 0x11e10000 0x1700>;
status = "disabled";
u2port0: usb-phy@0 {
@@ -498,11 +499,11 @@ u2port1: usb-phy@1000 {
};
ethsys: syscon@15000000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "mediatek,mt7986-ethsys",
"syscon";
reg = <0 0x15000000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -579,26 +580,26 @@ eth: ethernet@15100000 {
<&topckgen CLK_TOP_SGM_325M_SEL>;
assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
<&apmixedsys CLK_APMIXED_SGMPLL>;
+ #reset-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
mediatek,ethsys = <ðsys>;
mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
mediatek,wed-pcie = <&wed_pcie>;
mediatek,wed = <&wed0>, <&wed1>;
- #reset-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
wifi: wifi@18000000 {
compatible = "mediatek,mt7986-wmac";
+ reg = <0 0x18000000 0 0x1000000>,
+ <0 0x10003000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>;
resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
reset-names = "consys";
clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
<&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
clock-names = "mcu", "ap2conn";
- reg = <0 0x18000000 0 0x1000000>,
- <0 0x10003000 0 0x1000>,
- <0 0x11d10000 0 0x1000>;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
--
2.35.3
From: Rafał Miłecki <[email protected]>
Use order described as preferred in DTS Coding Style:
1. Sort bus nodes by unit address
2. Use alpha-numerical order for the rest
Signed-off-by: Rafał Miłecki <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 118 +++++++++++-----------
1 file changed, 59 insertions(+), 59 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 23feeff881de..a0f28b9ada18 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -16,13 +16,6 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- clk40m: oscillator-40m {
- compatible = "fixed-clock";
- clock-frequency = <40000000>;
- #clock-cells = <0>;
- clock-output-names = "clkxtal";
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -59,6 +52,13 @@ cpu3: cpu@3 {
};
};
+ clk40m: oscillator-40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "clkxtal";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -121,15 +121,6 @@ wo_boot: wo-boot@15194000 {
};
- timer {
- compatible = "arm,armv8-timer";
- interrupt-parent = <&gic>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-
soc {
compatible = "simple-bus";
ranges;
@@ -202,6 +193,20 @@ pio: pinctrl@1001f000 {
#interrupt-cells = <2>;
};
+ pwm: pwm@10048000 {
+ compatible = "mediatek,mt7986-pwm";
+ reg = <0 0x10048000 0 0x1000>;
+ #clock-cells = <1>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&infracfg CLK_INFRA_PWM_STA>,
+ <&infracfg CLK_INFRA_PWM1_CK>,
+ <&infracfg CLK_INFRA_PWM2_CK>;
+ clock-names = "top", "main", "pwm1", "pwm2";
+ status = "disabled";
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
@@ -240,20 +245,6 @@ crypto: crypto@10320000 {
status = "disabled";
};
- pwm: pwm@10048000 {
- compatible = "mediatek,mt7986-pwm";
- reg = <0 0x10048000 0 0x1000>;
- #clock-cells = <1>;
- #pwm-cells = <2>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen CLK_TOP_PWM_SEL>,
- <&infracfg CLK_INFRA_PWM_STA>,
- <&infracfg CLK_INFRA_PWM1_CK>,
- <&infracfg CLK_INFRA_PWM2_CK>;
- clock-names = "top", "main", "pwm1", "pwm2";
- status = "disabled";
- };
-
uart0: serial@11002000 {
compatible = "mediatek,mt7986-uart",
"mediatek,mt6577-uart";
@@ -337,6 +328,21 @@ spi1: spi@1100b000 {
status = "disabled";
};
+ thermal: thermal@1100c800 {
+ compatible = "mediatek,mt7986-thermal";
+ reg = <0 0x1100c800 0 0x800>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_THERM_CK>,
+ <&infracfg CLK_INFRA_ADC_26M_CK>,
+ <&infracfg CLK_INFRA_ADC_FRC_CK>;
+ clock-names = "therm", "auxadc", "adc_32k";
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ };
+
auxadc: adc@1100d000 {
compatible = "mediatek,mt7986-auxadc";
reg = <0 0x1100d000 0 0x1000>;
@@ -388,21 +394,6 @@ mmc0: mmc@11230000 {
status = "disabled";
};
- thermal: thermal@1100c800 {
- compatible = "mediatek,mt7986-thermal";
- reg = <0 0x1100c800 0 0x800>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg CLK_INFRA_THERM_CK>,
- <&infracfg CLK_INFRA_ADC_26M_CK>,
- <&infracfg CLK_INFRA_ADC_FRC_CK>;
- clock-names = "therm", "auxadc", "adc_32k";
- nvmem-cells = <&thermal_calibration>;
- nvmem-cell-names = "calibration-data";
- #thermal-sensor-cells = <1>;
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
- };
-
pcie: pcie@11280000 {
compatible = "mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
@@ -534,20 +525,6 @@ wed1: wed@15011000 {
mediatek,wo-ccif = <&wo_ccif1>;
};
- wo_ccif0: syscon@151a5000 {
- compatible = "mediatek,mt7986-wo-ccif", "syscon";
- reg = <0 0x151a5000 0 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- wo_ccif1: syscon@151ad000 {
- compatible = "mediatek,mt7986-wo-ccif", "syscon";
- reg = <0 0x151ad000 0 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
- };
-
eth: ethernet@15100000 {
compatible = "mediatek,mt7986-eth";
reg = <0 0x15100000 0 0x80000>;
@@ -590,6 +567,20 @@ eth: ethernet@15100000 {
status = "disabled";
};
+ wo_ccif0: syscon@151a5000 {
+ compatible = "mediatek,mt7986-wo-ccif", "syscon";
+ reg = <0 0x151a5000 0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ wo_ccif1: syscon@151ad000 {
+ compatible = "mediatek,mt7986-wo-ccif", "syscon";
+ reg = <0 0x151ad000 0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
wifi: wifi@18000000 {
compatible = "mediatek,mt7986-wmac";
reg = <0 0x18000000 0 0x1000000>,
@@ -647,4 +638,13 @@ cpu_trip_active_low: active-low {
};
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
};
--
2.35.3