This series adds DT bindings and dts descriptions for SolidRun AM642
based SoM and Hummingboard EVB.
Additionally a commit from downstream vendor kernel are included,
enhancing support for pru based ethernet.
I wasn't sure how to properly annotate it in commit description /
signed-off area ...:
1. add description for "Industrial Ethernet Peripherals" (IEP) to am64
https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm64/boot/dts/ti/k3-am64-main.dtsi?h=ti-linux-6.1.y-cicd&id=5afb73d82a014b59462162d960b350b8c58e5ae6
IEP is already supported in-tree by a driver, and used in
k3-am65-main.dtsi.
Unfortunately dtbs_check reported many problems, I put them up as rfc in
the commit description of patch #2.
Signed-off-by: Josua Mayer <[email protected]>
---
Josua Mayer (4):
dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
arm64: dts: add description for solidrun am642 som and evaluation board
arm64: dts: ti: hummingboard-t: add descriptions for m.2 pci-e and usb-3
arm64: dts: ti: am642-sr-som: enable iep for pru ethernet ports
Suman Anna (1):
arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes
Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 +
arch/arm64/boot/dts/ti/Makefile | 3 +
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 24 +
.../boot/dts/ti/k3-am642-hummingboard-t-pcie.dts | 31 +
.../boot/dts/ti/k3-am642-hummingboard-t-usb3.dts | 37 ++
arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts | 333 +++++++++++
arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi | 639 +++++++++++++++++++++
7 files changed, 1074 insertions(+)
---
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
change-id: 20240101-add-am64-som-51a1ca47edf3
Sincerely,
--
Josua Mayer <[email protected]>