2024-01-04 18:22:43

by Werner Sembach

[permalink] [raw]
Subject: [PATCH v3 0/2] i8042: Add forcenorestore quirk to leave controller

v2: Just a typo fix in commit message
v3: Another typo fix in commit message




2024-01-04 18:22:43

by Werner Sembach

[permalink] [raw]
Subject: [PATCH v3 1/2] i8042: Add forcenorestore quirk to leave controller untouched even on s3

On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuses the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.

These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.

This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.

This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.

Signed-off-by: Werner Sembach <[email protected]>
Cc: [email protected]
---
drivers/input/serio/i8042-acpipnpio.h | 10 +++++++---
drivers/input/serio/i8042.c | 10 +++++++---
2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index b585b1dab870e..10ec4534e5e14 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -83,6 +83,7 @@ static inline void i8042_write_command(int val)
#define SERIO_QUIRK_KBDRESET BIT(12)
#define SERIO_QUIRK_DRITEK BIT(13)
#define SERIO_QUIRK_NOPNP BIT(14)
+#define SERIO_QUIRK_FORCENORESTORE BIT(15)

/* Quirk table for different mainboards. Options similar or identical to i8042
* module parameters.
@@ -1657,6 +1658,8 @@ static void __init i8042_check_quirks(void)
if (quirks & SERIO_QUIRK_NOPNP)
i8042_nopnp = true;
#endif
+ if (quirks & SERIO_QUIRK_FORCENORESTORE)
+ i8042_forcenorestore = true;
}
#else
static inline void i8042_check_quirks(void) {}
@@ -1690,7 +1693,7 @@ static int __init i8042_platform_init(void)

i8042_check_quirks();

- pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+ pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
i8042_nokbd ? " nokbd" : "",
i8042_noaux ? " noaux" : "",
i8042_nomux ? " nomux" : "",
@@ -1710,10 +1713,11 @@ static int __init i8042_platform_init(void)
"",
#endif
#ifdef CONFIG_PNP
- i8042_nopnp ? " nopnp" : "");
+ i8042_nopnp ? " nopnp" : "",
#else
- "");
+ "",
#endif
+ i8042_forcenorestore ? " forcenorestore" : "");

retval = i8042_pnp_init();
if (retval)
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 9fbb8d31575ae..2233d93f90e81 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -115,6 +115,10 @@ module_param_named(nopnp, i8042_nopnp, bool, 0);
MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
#endif

+static bool i8042_forcenorestore;
+module_param_named(forcenorestore, i8042_forcenorestore, bool, 0);
+MODULE_PARM_DESC(forcenorestore, "Force no restore on s3 resume, copying s2idle behaviour");
+
#define DEBUG
#ifdef DEBUG
static bool i8042_debug;
@@ -1232,7 +1236,7 @@ static int i8042_pm_suspend(struct device *dev)
{
int i;

- if (pm_suspend_via_firmware())
+ if (!i8042_forcenorestore && pm_suspend_via_firmware())
i8042_controller_reset(true);

/* Set up serio interrupts for system wakeup. */
@@ -1248,7 +1252,7 @@ static int i8042_pm_suspend(struct device *dev)

static int i8042_pm_resume_noirq(struct device *dev)
{
- if (!pm_resume_via_firmware())
+ if (i8042_forcenorestore || !pm_resume_via_firmware())
i8042_interrupt(0, NULL);

return 0;
@@ -1271,7 +1275,7 @@ static int i8042_pm_resume(struct device *dev)
* not restore the controller state to whatever it had been at boot
* time, so we do not need to do anything.
*/
- if (!pm_suspend_via_firmware())
+ if (i8042_forcenorestore || !pm_suspend_via_firmware())
return 0;

/*
--
2.34.1


2024-01-04 18:22:50

by Werner Sembach

[permalink] [raw]
Subject: [PATCH v3 2/2] i8042: Use new forcenorestore quirk to replace old buggy quirk combination

The old quirk combination sometimes cause a laggy keyboard after boot. With
the new quirk the initial issue of an unresponsive keyboard after s3 resume
is also fixed, but it doesn't have the negative side effect of the
sometimes laggy keyboard.

Signed-off-by: Werner Sembach <[email protected]>
Cc: [email protected]
---
drivers/input/serio/i8042-acpipnpio.h | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 10ec4534e5e14..e631a26394e92 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1142,18 +1142,10 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
},
{
- /*
- * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
- * the keyboard very laggy for ~5 seconds after boot and
- * sometimes also after resume.
- * However both are required for the keyboard to not fail
- * completely sometimes after boot or resume.
- */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "N150CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
--
2.34.1