On 08.01.2024 10:36, Dimitri Fedrau wrote:
> Changes in v2:
> - used defines MDIO_CTRL1_LPOWER and MDIO_PMA_CTRL1_SPEED1000
> in mv88q222x_config_aneg_preinit
> - use genphy_c45_loopback
> - mv88q2xxx_read_status reads speed, master or slave state when
> autonegotiation is enabled
> - added defines for magic values in mv88q222x_get_sqi
>
> Changes in v3:
> - mv88q2xxx_read_status includes autonegotiation case
> - add support for 100BT1 and 1000BT1 linkmode advertisement
> - use mv88q2xxx_get_sqi and mv88q2xxx_get_sqi_max, remove
> mv88q222x_get_sqi and mv88q222x_get_sqi_max
> - fix typo: rename mv88q2xxxx_get_sqi and mv88q2xxxx_get_sqi_max to
> mv88q2xxx_get_sqi and mv88q2xxx_get_sqi
> - add define MDIO_MMD_PCS_MV_RX_STAT for magic value 0x8230, documented
> in latest datasheets for both PHYs
>
> Changes in V4:
> - clean up init sequence
> - separate patch for fixing typos in upstreamed code
>
> Dimitri Fedrau (5):
> net: phy: Add BaseT1 auto-negotiation constants
> net: phy: Support 100/1000BT1 linkmode advertisements
> net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
> net: phy: marvell-88q2xxx: fix typos
> net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
>
> drivers/net/phy/marvell-88q2xxx.c | 234 +++++++++++++++++++++++++++---
> drivers/net/phy/phy-c45.c | 3 +-
> include/linux/marvell_phy.h | 1 +
> include/linux/mdio.h | 8 +
> include/uapi/linux/mdio.h | 2 +
> 5 files changed, 230 insertions(+), 18 deletions(-)
>
net-next is closed. Let's see whether the maintainers still accept your series.
Otherwise you may have to resubmit once net-next opens again.
Am Mon, Jan 08, 2024 at 12:18:30PM +0100 schrieb Heiner Kallweit:
> On 08.01.2024 10:36, Dimitri Fedrau wrote:
> > Changes in v2:
> > - used defines MDIO_CTRL1_LPOWER and MDIO_PMA_CTRL1_SPEED1000
> > in mv88q222x_config_aneg_preinit
> > - use genphy_c45_loopback
> > - mv88q2xxx_read_status reads speed, master or slave state when
> > autonegotiation is enabled
> > - added defines for magic values in mv88q222x_get_sqi
> >
> > Changes in v3:
> > - mv88q2xxx_read_status includes autonegotiation case
> > - add support for 100BT1 and 1000BT1 linkmode advertisement
> > - use mv88q2xxx_get_sqi and mv88q2xxx_get_sqi_max, remove
> > mv88q222x_get_sqi and mv88q222x_get_sqi_max
> > - fix typo: rename mv88q2xxxx_get_sqi and mv88q2xxxx_get_sqi_max to
> > mv88q2xxx_get_sqi and mv88q2xxx_get_sqi
> > - add define MDIO_MMD_PCS_MV_RX_STAT for magic value 0x8230, documented
> > in latest datasheets for both PHYs
> >
> > Changes in V4:
> > - clean up init sequence
> > - separate patch for fixing typos in upstreamed code
> >
> > Dimitri Fedrau (5):
> > net: phy: Add BaseT1 auto-negotiation constants
> > net: phy: Support 100/1000BT1 linkmode advertisements
> > net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
> > net: phy: marvell-88q2xxx: fix typos
> > net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
> >
> > drivers/net/phy/marvell-88q2xxx.c | 234 +++++++++++++++++++++++++++---
> > drivers/net/phy/phy-c45.c | 3 +-
> > include/linux/marvell_phy.h | 1 +
> > include/linux/mdio.h | 8 +
> > include/uapi/linux/mdio.h | 2 +
> > 5 files changed, 230 insertions(+), 18 deletions(-)
> >
> net-next is closed. Let's see whether the maintainers still accept your series.
> Otherwise you may have to resubmit once net-next opens again.
>
Hi Heiner,
thanks for the information, next time I will check if net-next is
closed.
Best regards,
Dimitri Fedrau
On 08.01.2024 12:24, Dimitri Fedrau wrote:
> Am Mon, Jan 08, 2024 at 12:18:30PM +0100 schrieb Heiner Kallweit:
>> On 08.01.2024 10:36, Dimitri Fedrau wrote:
>>> Changes in v2:
>>> - used defines MDIO_CTRL1_LPOWER and MDIO_PMA_CTRL1_SPEED1000
>>> in mv88q222x_config_aneg_preinit
>>> - use genphy_c45_loopback
>>> - mv88q2xxx_read_status reads speed, master or slave state when
>>> autonegotiation is enabled
>>> - added defines for magic values in mv88q222x_get_sqi
>>>
>>> Changes in v3:
>>> - mv88q2xxx_read_status includes autonegotiation case
>>> - add support for 100BT1 and 1000BT1 linkmode advertisement
>>> - use mv88q2xxx_get_sqi and mv88q2xxx_get_sqi_max, remove
>>> mv88q222x_get_sqi and mv88q222x_get_sqi_max
>>> - fix typo: rename mv88q2xxxx_get_sqi and mv88q2xxxx_get_sqi_max to
>>> mv88q2xxx_get_sqi and mv88q2xxx_get_sqi
>>> - add define MDIO_MMD_PCS_MV_RX_STAT for magic value 0x8230, documented
>>> in latest datasheets for both PHYs
>>>
>>> Changes in V4:
>>> - clean up init sequence
>>> - separate patch for fixing typos in upstreamed code
>>>
>>> Dimitri Fedrau (5):
>>> net: phy: Add BaseT1 auto-negotiation constants
>>> net: phy: Support 100/1000BT1 linkmode advertisements
>>> net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
>>> net: phy: marvell-88q2xxx: fix typos
>>> net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
>>>
>>> drivers/net/phy/marvell-88q2xxx.c | 234 +++++++++++++++++++++++++++---
>>> drivers/net/phy/phy-c45.c | 3 +-
>>> include/linux/marvell_phy.h | 1 +
>>> include/linux/mdio.h | 8 +
>>> include/uapi/linux/mdio.h | 2 +
>>> 5 files changed, 230 insertions(+), 18 deletions(-)
>>>
>> net-next is closed. Let's see whether the maintainers still accept your series.
>> Otherwise you may have to resubmit once net-next opens again.
>>
> Hi Heiner,
>
> thanks for the information, next time I will check if net-next is
> closed.
>
https://lwn.net/Articles/727558/
> Best regards,
> Dimitri Fedrau