This patchset adds mipi dphy tx support for the StarFive JH7110 SoC.
It is used to transfer DSI data. The series has been tested on
the VisionFive 2 board.
changes since v1:
- Rebased on tag v6.7.
patch 1:
- Drop 'dphy_'prefix.
- Drop DSI reset.
- Drop unnecessary resets.
patch 2:
- Changed the commit message.
- Use dev_err_probe() and PTR_ERR() in probing.
- Drop DSI reset operation.
- Drop unnecessary resets operation.
- Add configs in array for full support of the module
- Changed 'void *io_addr' to 'void __iomem *io_addr'.
v1: https://patchwork.kernel.org/project/linux-phy/cover/[email protected]/
Shengyang Chen (2):
dt-bindings: phy: Add starfive,jh7110-dphy-tx
phy: starfive: Add mipi dphy tx support
.../bindings/phy/starfive,jh7110-dphy-tx.yaml | 68 ++
MAINTAINERS | 7 +
drivers/phy/starfive/Kconfig | 10 +
drivers/phy/starfive/Makefile | 1 +
drivers/phy/starfive/phy-jh7110-dphy-tx.c | 651 ++++++++++++++++++
5 files changed, 737 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml
create mode 100644 drivers/phy/starfive/phy-jh7110-dphy-tx.c
--
2.17.1