Add binding for Power State Change Reason (PSCR) subsystem
Signed-off-by: Oleksij Rempel <[email protected]>
---
.../devicetree/bindings/power/reset/pscr.yaml | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/pscr.yaml
diff --git a/Documentation/devicetree/bindings/power/reset/pscr.yaml b/Documentation/devicetree/bindings/power/reset/pscr.yaml
new file mode 100644
index 000000000000..1ce973f3473c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/pscr.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/state-change/pscr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power State Change Reason (PSCR)
+
+maintainers:
+ - Oleksij Rempel <[email protected]>
+
+description: Binding for devices responsable to store reasons for power state
+ changes such as reboot and power-off. Reasons like unknown, under voltage,
+ and over temperature are captured for diagnostic or automatic recovery
+ purposes.
+
+properties:
+ $nodename:
+ pattern: "^pscr(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+ pscr-unknown:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Value to indicate an unknown reason for the power state change.
+
+ pscr-under-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Value to indicate an under-voltage condition of a system critical
+ regulator as the reason for the power state change.
+
+ pscr-over-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Value to indicate an over-current condition of a system ctitical regulator
+ as the reason for the power state change.
+
+ pscr-regulator-failure:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Value to indicate an unknow, system ctitical regulator related failure
+ as the reason for the power state change.
+
+ pscr-over-temperature:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Value to indicate a system critical over-temperature condition as the
+ reason for the power state change.
+
+additionalProperties: true
+
+...
--
2.39.2
On Fri, 19 Jan 2024 14:25:15 +0100, Oleksij Rempel wrote:
> Add binding for Power State Change Reason (PSCR) subsystem
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> .../devicetree/bindings/power/reset/pscr.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/reset/pscr.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/reset/pscr.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
$id: http://devicetree.org/schemas/power/state-change/pscr.yaml
file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/reset/pscr.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On Fri, Jan 19, 2024 at 02:25:15PM +0100, Oleksij Rempel wrote:
> Add binding for Power State Change Reason (PSCR) subsystem
Why?
How is this different from the reboot reason binding?
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> .../devicetree/bindings/power/reset/pscr.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/reset/pscr.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/reset/pscr.yaml b/Documentation/devicetree/bindings/power/reset/pscr.yaml
> new file mode 100644
> index 000000000000..1ce973f3473c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/pscr.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/state-change/pscr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Power State Change Reason (PSCR)
> +
> +maintainers:
> + - Oleksij Rempel <[email protected]>
> +
> +description: Binding for devices responsable to store reasons for power state
responsible
> + changes such as reboot and power-off. Reasons like unknown, under voltage,
> + and over temperature are captured for diagnostic or automatic recovery
> + purposes.
> +
> +properties:
> + $nodename:
> + pattern: "^pscr(@.*|-([0-9]|[1-9][0-9]+))?$"
Drop. This could be used in any random device.
> +
> + pscr-unknown:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Value to indicate an unknown reason for the power state change.
What's an undocumented value? It would be unknown too, so just drop this
property.
> +
> + pscr-under-voltage:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Value to indicate an under-voltage condition of a system critical
> + regulator as the reason for the power state change.
> +
> + pscr-over-current:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Value to indicate an over-current condition of a system ctitical regulator
> + as the reason for the power state change.
> +
> + pscr-regulator-failure:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Value to indicate an unknow, system ctitical regulator related failure
> + as the reason for the power state change.
> +
> + pscr-over-temperature:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Value to indicate a system critical over-temperature condition as the
> + reason for the power state change.
> +
> +additionalProperties: true
> +
> +...
> --
> 2.39.2
>
On Fri, Jan 19, 2024 at 11:28:38AM -0600, Rob Herring wrote:
> On Fri, Jan 19, 2024 at 02:25:15PM +0100, Oleksij Rempel wrote:
> > Add binding for Power State Change Reason (PSCR) subsystem
>
> Why?
>
> How is this different from the reboot reason binding?
I was not able to find "reboot reason", you probably refer to "reboot
mode".
Reboot Mode:
Purpose: Dictates how the system should reboot (e.g., normal, recovery,
bootloader).
Usage: Provides instructions for the next boot mode.
Scenario: Utilized in planned reboots or software-triggered reset scenarios.
PSCR (Power State Change Reasons):
Purpose: Logs the reason behind a power state change (e.g., voltage drop,
over-temperature).
Usage: Used for rapid logging and post-event analysis, potentially informing
automatic decision-making in subsequent boots.
Scenario: Critical in abrupt power-down situations where immediate, detailed
decision-making is not possible.
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |