Support for Avago APDS9306 Ambient Light Sensor
Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel approximates the response of the human-eye providing direct
read out where the output count is proportional to ambient light levels.
It is internally temperature compensated and rejects 50Hz and 60Hz flicker
caused by artificial light sources. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.
This driver also uses the IIO GTS (Gain Time Scale) Helpers Namespace for
Scales, Gains and Integration time implementation.
Link: https://docs.broadcom.com/doc/AV02-4755EN
Following features are supported:
- I2C interface
- 2 channels - als and clear
- Raw data for als and clear channels
- Up to 20 bit resolution
- 20 bit data register for each channel
- Common Configurable items for both channels
- Integration Time
- Scale
- Interrupt (event) interface
- High and Low threshold interrupts for each channel
- Selection of interrupt channels - als or clear
- Selection of interrupt mode - threshold or adaptive
- Level selection for adaptive threshold interrupts
- Persistence (Period) level selection for interrupts
root@stm32mp1:~# tree -I 'dev|name|of_node|power|subsystem|uevent' \
/sys/bus/iio/devices/iio:device0/
|-- events
| |-- in_illuminance_thresh_either_en
| |-- in_intensity_clear_thresh_either_en
| |-- thresh_adaptive_either_en
| |-- thresh_adaptive_either_value
| |-- thresh_adaptive_either_values_available
| |-- thresh_either_period
| |-- thresh_either_period_available
| |-- thresh_falling_value
| `-- thresh_rising_value
|-- in_illuminance_raw
|-- in_illuminance_scale
|-- in_illuminance_scale_available
|-- in_intensity_clear_raw
|-- integration_time
|-- integration_time_available
|-- sampling_frequency
|-- sampling_frequency_available
`-- waiting_for_supplier
1 directory, 18 files
v2 -> v5:
- Bumped up the version:
RFC->v0->v1->v2->v3 (Earlier scheme)
v1->v2->v3->v4->v5 (Scheme after review) (Current scheme)
Link: https://lore.kernel.org/all/20231028143631.2545f93e@jic23-huawei/
- Added separate patch to merge schemas for APDS9300 and APDS9906. Added
APDS9306 support on top of that.
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
- Removed scale attribute for Intensity channel:
Link: https://lore.kernel.org/all/20231204095108.22f89718@jic23-huawei/
- Dropped caching of hardware gain, repeat rate and integration time and
updated code as per earlier reviews.
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
- Added descriptive commit messages
- Fixed wrongly formatted commit messages
- Added changelog in right positions
- Link to v2:
https://lore.kernel.org/lkml/[email protected]/
v2 -> v5 Bindings:
- Removed 'required' for Interrupts and 'oneOf' for compatibility strings
as per below reviews:
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
Link: https://lore.kernel.org/lkml/[email protected]/
- Implemented changes as per previous reviews:
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
Link: https://lore.kernel.org/lkml/[email protected]/
Subhajit Ghosh (3):
dt-bindings: iio: light: Squash APDS9300 and APDS9960 schemas
dt-bindings: iio: light: Avago APDS9306
iio: light: Add support for APDS9306 Light Sensor
.../bindings/iio/light/avago,apds9300.yaml | 20 +-
.../bindings/iio/light/avago,apds9960.yaml | 44 -
drivers/iio/light/Kconfig | 12 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/apds9306.c | 1315 +++++++++++++++++
5 files changed, 1343 insertions(+), 49 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
create mode 100644 drivers/iio/light/apds9306.c
base-commit: 9d1694dc91ce7b80bc96d6d8eaf1a1eca668d847
--
2.34.1
Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel approximates the response of the human-eye providing direct
read out where the output count is proportional to ambient light levels.
It is internally temperature compensated and rejects 50Hz and 60Hz flicker
caused by artificial light sources. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.
This driver also uses the IIO GTS (Gain Time Scale) Helpers Namespace for
Scales, Gains and Integration time implementation.
Signed-off-by: Subhajit Ghosh <[email protected]>
---
v2 -> v5:
- Removed scale attribute for Intensity channel:
Link: https://lore.kernel.org/all/20231204095108.22f89718@jic23-huawei/
- Dropped caching of hardware gain, repeat rate and integration time and
updated code as per earlier reviews.
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
---
drivers/iio/light/Kconfig | 12 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/apds9306.c | 1315 ++++++++++++++++++++++++++++++++++
3 files changed, 1328 insertions(+)
create mode 100644 drivers/iio/light/apds9306.c
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 143003232d1c..fd972dd0364d 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -73,6 +73,18 @@ config APDS9300
To compile this driver as a module, choose M here: the
module will be called apds9300.
+config APDS9306
+ tristate "Avago APDS9306 Ambient Light Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_GTS_HELPER
+ help
+ If you say Y or M here, you get support for Avago APDS9306
+ Ambient Light Sensor.
+
+ If built as a dynamically linked module, it will be called
+ apds9306.
+
config APDS9960
tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
select REGMAP_I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 2e5fdb33e0e9..a30f906e91ba 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ADUX1020) += adux1020.o
obj-$(CONFIG_AL3010) += al3010.o
obj-$(CONFIG_AL3320A) += al3320a.o
obj-$(CONFIG_APDS9300) += apds9300.o
+obj-$(CONFIG_APDS9306) += apds9306.o
obj-$(CONFIG_APDS9960) += apds9960.o
obj-$(CONFIG_AS73211) += as73211.o
obj-$(CONFIG_BH1750) += bh1750.o
diff --git a/drivers/iio/light/apds9306.c b/drivers/iio/light/apds9306.c
new file mode 100644
index 000000000000..8ed5899050ed
--- /dev/null
+++ b/drivers/iio/light/apds9306.c
@@ -0,0 +1,1315 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * APDS-9306/APDS-9306-065 Ambient Light Sensor
+ * I2C Address: 0x52
+ * Datasheet: https://docs.broadcom.com/doc/AV02-4755EN
+ *
+ * Copyright (C) 2023 Subhajit Ghosh <[email protected]>
+ */
+
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/iio-gts-helper.h>
+#include <linux/iio/events.h>
+#include <linux/iio/sysfs.h>
+
+#include <asm/unaligned.h>
+
+#define APDS9306_MAIN_CTRL_REG 0x00
+#define APDS9306_ALS_MEAS_RATE_REG 0x04
+#define APDS9306_ALS_GAIN_REG 0x05
+#define APDS9306_PART_ID_REG 0x06
+#define APDS9306_MAIN_STATUS_REG 0x07
+#define APDS9306_CLEAR_DATA_0_REG 0x0A
+#define APDS9306_CLEAR_DATA_1_REG 0x0B
+#define APDS9306_CLEAR_DATA_2_REG 0x0C
+#define APDS9306_ALS_DATA_0_REG 0x0D
+#define APDS9306_ALS_DATA_1_REG 0x0E
+#define APDS9306_ALS_DATA_2_REG 0x0F
+#define APDS9306_INT_CFG_REG 0x19
+#define APDS9306_INT_PERSISTENCE_REG 0x1A
+#define APDS9306_ALS_THRES_UP_0_REG 0x21
+#define APDS9306_ALS_THRES_UP_1_REG 0x22
+#define APDS9306_ALS_THRES_UP_2_REG 0x23
+#define APDS9306_ALS_THRES_LOW_0_REG 0x24
+#define APDS9306_ALS_THRES_LOW_1_REG 0x25
+#define APDS9306_ALS_THRES_LOW_2_REG 0x26
+#define APDS9306_ALS_THRES_VAR_REG 0x27
+
+#define APDS9306_ALS_INT_STAT_MASK BIT(4)
+#define APDS9306_ALS_DATA_STAT_MASK BIT(3)
+
+#define APDS9306_ALS_THRES_VAL_MAX (BIT(20) - 1)
+#define APDS9306_ALS_THRES_VAR_VAL_MAX (BIT(3) - 1)
+#define APDS9306_ALS_PERSIST_VAL_MAX (BIT(4) - 1)
+#define APDS9306_ALS_READ_DATA_DELAY_US 20000
+#define APDS9306_NUM_REPEAT_RATES 7
+#define APDS9306_INT_CH_CLEAR 0
+#define APDS9306_INT_CH_ALS 1
+#define APDS9306_SAMP_FREQ_10HZ 0
+
+/*
+ * struct part_id_gts_multiplier - Part no. and corresponding gts multiplier
+ *
+ * GTS (Gain Time Scale) are helper functions for Light sensors which along
+ * with hardware gains also has gains associated with Integration times.
+ *
+ * There are two variants of the device with slightly different characteristics,
+ * they have same ADC count for different Lux levels as mentioned in the
+ * datasheet. This multiplier array is used to store the derived Lux per count
+ * value for the two variants to be used by the GTS helper functions.
+ *
+ * part_id: Part ID of the device
+ * max_scale_int: Multiplier for iio_init_iio_gts()
+ * max_scale_nano: Multiplier for iio_init_iio_gts()
+ */
+struct part_id_gts_multiplier {
+ int part_id;
+ int max_scale_int;
+ int max_scale_nano;
+};
+
+/*
+ * As per the datasheet, at HW Gain = 3x, Integration time 100mS (32x),
+ * typical 2000 ADC counts are observed for 49.8 uW per sq cm (340.134 lux)
+ * for apds9306 and 43 uW per sq cm (293.69 lux) for apds9306-065.
+ * Assuming lux per count is linear across all integration time ranges.
+ *
+ * Lux = (raw + offset) * scale; offset can be any value by userspace.
+ * HG = Hardware Gain; ITG = Gain by changing integration time.
+ * Scale table by IIO GTS Helpers = (1 / HG) * (1 / ITG) * Multiplier.
+ *
+ * The Lux values provided in the datasheet are at ITG=32x and HG=3x,
+ * at typical 2000 count for both variants of the device.
+ *
+ * Lux per ADC count at 3x and 32x for apds9306 = 340.134 / 2000
+ * Lux per ADC count at 3x and 32x for apds9306-065 = 293.69 / 2000
+ *
+ * The Multiplier for the scale table provided to userspace:
+ * IIO GTS scale Multiplier for apds9306 = (340.134 / 2000) * 32 * 3 = 16.326432
+ * and for apds9306-065 = (293.69 / 2000) * 32 * 3 = 14.09712
+ */
+static struct part_id_gts_multiplier apds9306_gts_mul[] = {
+ {
+ .part_id = 0xB1,
+ .max_scale_int = 16,
+ .max_scale_nano = 3264320,
+ }, {
+ .part_id = 0xB3,
+ .max_scale_int = 14,
+ .max_scale_nano = 9712000,
+ },
+};
+
+static const int apds9306_repeat_rate_freq[][2] = {
+ {40, 0},
+ {20, 0},
+ {10, 0},
+ {5, 0},
+ {2, 0},
+ {1, 0},
+ {0, 500000},
+};
+static_assert(ARRAY_SIZE(apds9306_repeat_rate_freq) ==
+ APDS9306_NUM_REPEAT_RATES);
+
+static const int apds9306_repeat_rate_period[] = {
+ 25000, 50000, 100000, 200000, 500000, 1000000, 2000000,
+};
+static_assert(ARRAY_SIZE(apds9306_repeat_rate_period) ==
+ APDS9306_NUM_REPEAT_RATES);
+
+/**
+ * struct apds9306_data - apds9306 private data and registers definitions
+ *
+ * @dev: Pointer to the device structure
+ * @gts: IIO Gain Time Scale structure
+ * @mutex: Lock for protecting register access, adc reads and power
+ * @regmap: Regmap structure pointer
+ * @regfield_sw_reset: Reg: MAIN_CTRL, Field: SW_Reset
+ * @regfield_en: Reg: MAIN_CTRL, Field: ALS_EN
+ * @regfield_intg_time: Reg: ALS_MEAS_RATE, Field: ALS Resolution/Bit Width
+ * @regfield_repeat_rate: Reg: ALS_MEAS_RATE, Field: ALS Measurement Rate
+ * @regfield_gain: Reg: ALS_GAIN, Field: ALS Gain Range
+ * @regfield_int_src: Reg: INT_CFG, Field: ALS Interrupt Source
+ * @regfield_int_thresh_var_en: Reg: INT_CFG, Field: ALS Var Interrupt Mode
+ * @regfield_int_en: Reg: INT_CFG, Field: ALS Interrupt Enable
+ * @regfield_int_persist_val: Reg: INT_PERSISTENCE, Field: ALS_PERSIST
+ * @regfield_int_thresh_var_val: Reg: ALS_THRSH_VAR, Field: ALS_THRES_VAR
+ * @nlux_per_count: nano lux per ADC count for a particular model
+ * @read_data_available: Flag set by IRQ handler for ADC data available
+ */
+struct apds9306_data {
+ struct device *dev;
+ struct iio_gts gts;
+ /*
+ * Protects device settings changes where some calculations are required
+ * before or after setting or getting the raw settings values from regmap
+ * writes or reads respectively.
+ */
+ struct mutex mutex;
+
+ struct regmap *regmap;
+ struct regmap_field *regfield_sw_reset;
+ struct regmap_field *regfield_en;
+ struct regmap_field *regfield_intg_time;
+ struct regmap_field *regfield_repeat_rate;
+ struct regmap_field *regfield_gain;
+ struct regmap_field *regfield_int_src;
+ struct regmap_field *regfield_int_thresh_var_en;
+ struct regmap_field *regfield_int_en;
+ struct regmap_field *regfield_int_persist_val;
+ struct regmap_field *regfield_int_thresh_var_val;
+
+ int nlux_per_count;
+ int read_data_available;
+};
+
+/*
+ * Available scales with gain 1x - 18x, timings 3.125, 25, 50, 100, 200, 400 mS
+ * Time impacts to gain: 1x, 8x, 16x, 32x, 64x, 128x
+ */
+#define APDS9306_GSEL_1X 0x00
+#define APDS9306_GSEL_3X 0x01
+#define APDS9306_GSEL_6X 0x02
+#define APDS9306_GSEL_9X 0x03
+#define APDS9306_GSEL_18X 0x04
+
+static const struct iio_gain_sel_pair apds9306_gains[] = {
+ GAIN_SCALE_GAIN(1, APDS9306_GSEL_1X),
+ GAIN_SCALE_GAIN(3, APDS9306_GSEL_3X),
+ GAIN_SCALE_GAIN(6, APDS9306_GSEL_6X),
+ GAIN_SCALE_GAIN(9, APDS9306_GSEL_9X),
+ GAIN_SCALE_GAIN(18, APDS9306_GSEL_18X),
+};
+
+#define APDS9306_MEAS_MODE_400MS 0x00
+#define APDS9306_MEAS_MODE_200MS 0x01
+#define APDS9306_MEAS_MODE_100MS 0x02
+#define APDS9306_MEAS_MODE_50MS 0x03
+#define APDS9306_MEAS_MODE_25MS 0x04
+#define APDS9306_MEAS_MODE_3125US 0x05
+
+static const struct iio_itime_sel_mul apds9306_itimes[] = {
+ GAIN_SCALE_ITIME_US(400000, APDS9306_MEAS_MODE_400MS, BIT(7)),
+ GAIN_SCALE_ITIME_US(200000, APDS9306_MEAS_MODE_200MS, BIT(6)),
+ GAIN_SCALE_ITIME_US(100000, APDS9306_MEAS_MODE_100MS, BIT(5)),
+ GAIN_SCALE_ITIME_US(50000, APDS9306_MEAS_MODE_50MS, BIT(4)),
+ GAIN_SCALE_ITIME_US(25000, APDS9306_MEAS_MODE_25MS, BIT(3)),
+ GAIN_SCALE_ITIME_US(3125, APDS9306_MEAS_MODE_3125US, BIT(0)),
+};
+
+static struct iio_event_spec apds9306_event_spec_als[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_shared_by_all = BIT(IIO_EV_INFO_VALUE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_shared_by_all = BIT(IIO_EV_INFO_VALUE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+ }, {
+ .type = IIO_EV_TYPE_THRESH_ADAPTIVE,
+ .mask_shared_by_all = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
+static struct iio_event_spec apds9306_event_spec_clear[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
+#define APDS9306_CHANNEL(_type) \
+ .type = _type, \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+
+static struct iio_chan_spec apds9306_channels_with_events[] = {
+ {
+ APDS9306_CHANNEL(IIO_LIGHT)
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE),
+ .event_spec = apds9306_event_spec_als,
+ .num_event_specs = ARRAY_SIZE(apds9306_event_spec_als),
+ }, {
+ APDS9306_CHANNEL(IIO_INTENSITY)
+ .channel2 = IIO_MOD_LIGHT_CLEAR,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .modified = 1,
+ .event_spec = apds9306_event_spec_clear,
+ .num_event_specs = ARRAY_SIZE(apds9306_event_spec_clear),
+ },
+};
+
+static struct iio_chan_spec apds9306_channels_without_events[] = {
+ {
+ APDS9306_CHANNEL(IIO_LIGHT)
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE),
+ }, {
+ APDS9306_CHANNEL(IIO_INTENSITY)
+ .channel2 = IIO_MOD_LIGHT_CLEAR,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .modified = 1,
+ },
+};
+
+/* INT_PERSISTENCE available */
+IIO_CONST_ATTR(thresh_either_period_available, "[0 1 15]");
+
+/* ALS_THRESH_VAR available */
+IIO_CONST_ATTR(thresh_adaptive_either_values_available, "[0 1 7]");
+
+static struct attribute *apds9306_event_attributes[] = {
+ &iio_const_attr_thresh_either_period_available.dev_attr.attr,
+ &iio_const_attr_thresh_adaptive_either_values_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group apds9306_event_attr_group = {
+ .attrs = apds9306_event_attributes,
+};
+
+static const struct regmap_range apds9306_readable_ranges[] = {
+ regmap_reg_range(APDS9306_MAIN_CTRL_REG, APDS9306_ALS_THRES_VAR_REG)
+};
+
+static const struct regmap_range apds9306_writable_ranges[] = {
+ regmap_reg_range(APDS9306_MAIN_CTRL_REG, APDS9306_ALS_GAIN_REG),
+ regmap_reg_range(APDS9306_INT_CFG_REG, APDS9306_ALS_THRES_VAR_REG)
+};
+
+static const struct regmap_range apds9306_volatile_ranges[] = {
+ regmap_reg_range(APDS9306_MAIN_STATUS_REG, APDS9306_MAIN_STATUS_REG),
+ regmap_reg_range(APDS9306_CLEAR_DATA_0_REG, APDS9306_ALS_DATA_2_REG)
+};
+
+static const struct regmap_range apds9306_precious_ranges[] = {
+ regmap_reg_range(APDS9306_MAIN_STATUS_REG, APDS9306_MAIN_STATUS_REG)
+};
+
+static const struct regmap_access_table apds9306_readable_table = {
+ .yes_ranges = apds9306_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(apds9306_readable_ranges)
+};
+
+static const struct regmap_access_table apds9306_writable_table = {
+ .yes_ranges = apds9306_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(apds9306_writable_ranges)
+};
+
+static const struct regmap_access_table apds9306_volatile_table = {
+ .yes_ranges = apds9306_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(apds9306_volatile_ranges)
+};
+
+static const struct regmap_access_table apds9306_precious_table = {
+ .yes_ranges = apds9306_precious_ranges,
+ .n_yes_ranges = ARRAY_SIZE(apds9306_precious_ranges)
+};
+
+static const struct regmap_config apds9306_regmap = {
+ .name = "apds9306_regmap",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &apds9306_readable_table,
+ .wr_table = &apds9306_writable_table,
+ .volatile_table = &apds9306_volatile_table,
+ .precious_table = &apds9306_precious_table,
+ .max_register = APDS9306_ALS_THRES_VAR_REG,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static const struct reg_field apds9306_regfield_sw_reset =
+ REG_FIELD(APDS9306_MAIN_CTRL_REG, 4, 4);
+
+static const struct reg_field apds9306_regfield_en =
+ REG_FIELD(APDS9306_MAIN_CTRL_REG, 1, 1);
+
+static const struct reg_field apds9306_regfield_intg_time =
+ REG_FIELD(APDS9306_ALS_MEAS_RATE_REG, 4, 6);
+
+static const struct reg_field apds9306_regfield_repeat_rate =
+ REG_FIELD(APDS9306_ALS_MEAS_RATE_REG, 0, 2);
+
+static const struct reg_field apds9306_regfield_gain =
+ REG_FIELD(APDS9306_ALS_GAIN_REG, 0, 2);
+
+static const struct reg_field apds9306_regfield_int_src =
+ REG_FIELD(APDS9306_INT_CFG_REG, 4, 5);
+
+static const struct reg_field apds9306_regfield_int_thresh_var_en =
+ REG_FIELD(APDS9306_INT_CFG_REG, 3, 3);
+
+static const struct reg_field apds9306_regfield_int_en =
+ REG_FIELD(APDS9306_INT_CFG_REG, 2, 2);
+
+static const struct reg_field apds9306_regfield_int_persist_val =
+ REG_FIELD(APDS9306_INT_PERSISTENCE_REG, 4, 7);
+
+static const struct reg_field apds9306_regfield_int_thresh_var_val =
+ REG_FIELD(APDS9306_ALS_THRES_VAR_REG, 0, 2);
+
+static int apds9306_regfield_init(struct apds9306_data *data)
+{
+ struct device *dev = data->dev;
+ struct regmap *regmap = data->regmap;
+ struct regmap_field *tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap, apds9306_regfield_sw_reset);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_sw_reset = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap, apds9306_regfield_en);
+ if (IS_ERR(data->regfield_en))
+ return PTR_ERR(data->regfield_en);
+ data->regfield_en = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap,
+ apds9306_regfield_intg_time);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_intg_time = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap,
+ apds9306_regfield_repeat_rate);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_repeat_rate = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap, apds9306_regfield_gain);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_gain = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap, apds9306_regfield_int_src);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_int_src = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap,
+ apds9306_regfield_int_thresh_var_en);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_int_thresh_var_en = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap, apds9306_regfield_int_en);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_int_en = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap,
+ apds9306_regfield_int_persist_val);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_int_persist_val = tmp;
+
+ tmp = devm_regmap_field_alloc(dev, regmap,
+ apds9306_regfield_int_thresh_var_val);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+ data->regfield_int_thresh_var_val = tmp;
+
+ return 0;
+}
+
+static int apds9306_power_state(struct apds9306_data *data, bool state)
+{
+ int ret;
+
+ /* Reset not included as it causes ugly I2C bus error */
+ if (state) {
+ ret = regmap_field_write(data->regfield_en, 1);
+ if (ret)
+ return ret;
+ /* 5ms wake up time */
+ fsleep(5000);
+ return 0;
+ }
+
+ return regmap_field_write(data->regfield_en, 0);
+}
+
+static int apds9306_runtime_power_on(struct device *dev)
+{
+ int ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ dev_err(dev, "runtime resume failed: %d\n", ret);
+
+ return ret;
+}
+
+static int apds9306_runtime_power_off(struct device *dev)
+{
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+
+static int apds9306_read_data(struct apds9306_data *data, int *val, int reg)
+{
+ struct device *dev = data->dev;
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ int ret, delay, intg_time, intg_time_idx, repeat_rate_idx, int_src;
+ int status = 0;
+ u8 buff[3];
+
+ ret = apds9306_runtime_power_on(data->dev);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(data->regfield_intg_time, &intg_time_idx);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(data->regfield_repeat_rate, &repeat_rate_idx);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(data->regfield_int_src, &int_src);
+ if (ret)
+ return ret;
+
+ intg_time = iio_gts_find_int_time_by_sel(&data->gts, intg_time_idx);
+ if (intg_time < 0)
+ delay = apds9306_repeat_rate_period[repeat_rate_idx];
+
+ /*
+ * Whichever is greater - integration time period or
+ * sampling period.
+ */
+ delay = max(intg_time,
+ apds9306_repeat_rate_period[repeat_rate_idx]);
+
+ /*
+ * Clear stale data flag that might have been set by the interrupt
+ * handler if it got data available flag set in the status reg.
+ */
+ data->read_data_available = 0;
+
+ /*
+ * If this function runs parallel with the interrupt handler, either
+ * this reads and clears the status registers or the interrupt handler
+ * does. The interrupt handler sets a flag for read data available
+ * in our private structure which we read here.
+ */
+ ret = regmap_read_poll_timeout(data->regmap, APDS9306_MAIN_STATUS_REG,
+ status, (status & (APDS9306_ALS_DATA_STAT_MASK |
+ APDS9306_ALS_INT_STAT_MASK)) ||
+ data->read_data_available,
+ APDS9306_ALS_READ_DATA_DELAY_US, delay * 2);
+ if (ret)
+ return ret;
+
+ /* If we reach here before the interrupt handler we push an event */
+ if ((status & APDS9306_ALS_INT_STAT_MASK)) {
+ iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_LIGHT, int_src,
+ IIO_EV_TYPE_THRESH, IIO_EV_DIR_EITHER),
+ iio_get_time_ns(indio_dev));
+ }
+
+ ret = regmap_bulk_read(data->regmap, reg, buff, sizeof(buff));
+ if (ret) {
+ dev_err(dev, "read data failed\n");
+ return ret;
+ }
+
+ *val = get_unaligned_le24(&buff);
+
+ return apds9306_runtime_power_off(dev);
+}
+
+static int apds9306_intg_time_get(struct apds9306_data *data, int *val2)
+{
+ int ret, intg_time_idx;
+
+ ret = regmap_field_read(data->regfield_intg_time, &intg_time_idx);
+ if (ret)
+ return ret;
+
+ ret = iio_gts_find_int_time_by_sel(&data->gts, intg_time_idx);
+ if (ret < 0)
+ return ret;
+
+ *val2 = ret;
+
+ return 0;
+}
+
+static int apds9306_intg_time_set(struct apds9306_data *data, int val2)
+{
+ struct device *dev = data->dev;
+ int ret, intg_old, gain_old, gain_new, gain_new_closest, intg_time_idx;
+ int gain_idx;
+ bool ok;
+
+ if (!iio_gts_valid_time(&data->gts, val2)) {
+ dev_err(dev, "Unsupported integration time %u\n", val2);
+ return -EINVAL;
+ }
+
+ ret = regmap_field_read(data->regfield_intg_time, &intg_time_idx);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(data->regfield_gain, &gain_idx);
+ if (ret)
+ return ret;
+
+ intg_old = iio_gts_find_int_time_by_sel(&data->gts, intg_time_idx);
+ if (ret < 0)
+ return ret;
+
+ if (intg_old == val2)
+ return 0;
+
+ gain_old = iio_gts_find_gain_by_sel(&data->gts, gain_idx);
+ if (gain_old < 0)
+ return gain_old;
+
+ ret = iio_gts_find_new_gain_by_old_gain_time(&data->gts, gain_old, intg_old,
+ val2, &gain_new);
+ if (gain_new < 0) {
+ dev_err(dev, "Unsupported gain with time\n");
+ return gain_new;
+ }
+
+ gain_new_closest = iio_find_closest_gain_low(&data->gts, gain_new, &ok);
+ if (gain_new_closest < 0) {
+ gain_new_closest = iio_gts_get_min_gain(&data->gts);
+ if (gain_new_closest < 0)
+ return gain_new_closest;
+ }
+ if (!ok)
+ dev_dbg(dev, "Unable to find optimum gain, setting minimum");
+
+ ret = iio_gts_find_sel_by_int_time(&data->gts, val2);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_field_write(data->regfield_intg_time, ret);
+ if (ret)
+ return ret;
+
+ ret = iio_gts_find_sel_by_gain(&data->gts, gain_new_closest);
+ if (ret < 0)
+ return ret;
+
+ return regmap_field_write(data->regfield_gain, ret);
+}
+
+static int apds9306_sampling_freq_get(struct apds9306_data *data, int *val,
+ int *val2)
+{
+ int ret, repeat_rate_idx;
+
+ ret = regmap_field_read(data->regfield_repeat_rate, &repeat_rate_idx);
+ if (ret)
+ return ret;
+
+ if (repeat_rate_idx > ARRAY_SIZE(apds9306_repeat_rate_freq))
+ return -EINVAL;
+
+ *val = apds9306_repeat_rate_freq[repeat_rate_idx][0];
+ *val2 = apds9306_repeat_rate_freq[repeat_rate_idx][1];
+
+ return 0;
+}
+
+static int apds9306_sampling_freq_set(struct apds9306_data *data, int val,
+ int val2)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(apds9306_repeat_rate_freq); i++) {
+ if (apds9306_repeat_rate_freq[i][0] == val &&
+ apds9306_repeat_rate_freq[i][1] == val2)
+ break;
+ }
+ if (i == ARRAY_SIZE(apds9306_repeat_rate_freq))
+ return -EINVAL;
+
+ return regmap_field_write(data->regfield_repeat_rate, i);
+}
+
+static int apds9306_scale_get(struct apds9306_data *data, int *val, int *val2)
+{
+ int gain, intg, ret, intg_time_idx, gain_idx;
+
+ ret = regmap_field_read(data->regfield_gain, &gain_idx);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(data->regfield_intg_time, &intg_time_idx);
+ if (ret)
+ return ret;
+
+ gain = iio_gts_find_gain_by_sel(&data->gts, gain_idx);
+ if (gain < 0)
+ return gain;
+
+ intg = iio_gts_find_int_time_by_sel(&data->gts, intg_time_idx);
+ if (intg < 0)
+ return intg;
+
+ return iio_gts_get_scale(&data->gts, gain, intg, val, val2);
+}
+
+static int apds9306_scale_set(struct apds9306_data *data, int val, int val2)
+{
+ int i, ret, time_sel, gain_sel, intg_time_idx;
+
+ ret = regmap_field_read(data->regfield_intg_time, &intg_time_idx);
+ if (ret)
+ return ret;
+
+ ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, intg_time_idx,
+ val, val2, &gain_sel);
+ if (ret) {
+ for (i = 0; i < data->gts.num_itime; i++) {
+ time_sel = data->gts.itime_table[i].sel;
+
+ if (time_sel == intg_time_idx)
+ continue;
+
+ ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts,
+ time_sel, val, val2, &gain_sel);
+ if (!ret)
+ break;
+ }
+ if (ret)
+ return -EINVAL;
+
+ ret = regmap_field_write(data->regfield_intg_time, time_sel);
+ if (ret)
+ return ret;
+ }
+
+ return regmap_field_write(data->regfield_gain, gain_sel);
+}
+
+static int apds9306_event_period_get(struct apds9306_data *data, int *val)
+{
+ int period, ret;
+
+ ret = regmap_field_read(data->regfield_int_persist_val, &period);
+ if (ret)
+ return ret;
+
+ if (period > APDS9306_ALS_PERSIST_VAL_MAX)
+ return -EINVAL;
+
+ *val = period;
+
+ return ret;
+}
+
+static int apds9306_event_period_set(struct apds9306_data *data, int val)
+{
+ if (!in_range(val, 0, APDS9306_ALS_PERSIST_VAL_MAX))
+ return -EINVAL;
+
+ return regmap_field_write(data->regfield_int_persist_val, val);
+}
+
+static int apds9306_event_thresh_get(struct apds9306_data *data, int dir,
+ int *val)
+{
+ int var, ret;
+ u8 buff[3];
+
+ if (dir == IIO_EV_DIR_RISING)
+ var = APDS9306_ALS_THRES_UP_0_REG;
+ else if (dir == IIO_EV_DIR_FALLING)
+ var = APDS9306_ALS_THRES_LOW_0_REG;
+ else
+ return -EINVAL;
+
+ ret = regmap_bulk_read(data->regmap, var, buff, sizeof(buff));
+ if (ret)
+ return ret;
+
+ *val = get_unaligned_le24(&buff);
+
+ return 0;
+}
+
+static int apds9306_event_thresh_set(struct apds9306_data *data, int dir,
+ int val)
+{
+ int var;
+ u8 buff[3];
+
+ if (dir == IIO_EV_DIR_RISING)
+ var = APDS9306_ALS_THRES_UP_0_REG;
+ else if (dir == IIO_EV_DIR_FALLING)
+ var = APDS9306_ALS_THRES_LOW_0_REG;
+ else
+ return -EINVAL;
+
+ if (!in_range(val, 0, APDS9306_ALS_THRES_VAL_MAX))
+ return -EINVAL;
+
+ put_unaligned_le24(val, buff);
+
+ return regmap_bulk_write(data->regmap, var, buff, sizeof(buff));
+}
+
+static int apds9306_event_thresh_adaptive_get(struct apds9306_data *data,
+ int *val)
+{
+ int thr_adpt, ret;
+
+ ret = regmap_field_read(data->regfield_int_thresh_var_val, &thr_adpt);
+ if (ret)
+ return ret;
+
+ if (thr_adpt > APDS9306_ALS_THRES_VAR_VAL_MAX)
+ return -EINVAL;
+
+ *val = thr_adpt;
+
+ return ret;
+}
+
+static int apds9306_event_thresh_adaptive_set(struct apds9306_data *data,
+ int val)
+{
+ if (!in_range(val, 0, APDS9306_ALS_THRES_VAR_VAL_MAX))
+ return -EINVAL;
+
+ return regmap_field_write(data->regfield_int_thresh_var_val, val);
+}
+
+static int apds9306_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+ int ret, reg;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (chan->channel2 == IIO_MOD_LIGHT_CLEAR)
+ reg = APDS9306_CLEAR_DATA_0_REG;
+ else
+ reg = APDS9306_ALS_DATA_0_REG;
+ /*
+ * Changing device parameters during adc operation, resets
+ * the ADC which has to avoided.
+ */
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ ret = apds9306_read_data(data, val, reg);
+ iio_device_release_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_INT_TIME:
+ ret = apds9306_intg_time_get(data, val2);
+ if (ret)
+ return ret;
+ *val = 0;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = apds9306_sampling_freq_get(data, val, val2);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SCALE:
+ ret = apds9306_scale_get(data, val, val2);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+};
+
+static int apds9306_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ return iio_gts_avail_times(&data->gts, vals, type, length);
+ case IIO_CHAN_INFO_SCALE:
+ return iio_gts_all_avail_scales(&data->gts, vals, type, length);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *length = ARRAY_SIZE(apds9306_repeat_rate_freq) * 2;
+ *vals = (const int *)apds9306_repeat_rate_freq;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int apds9306_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_INT_TIME:
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int apds9306_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+
+ guard(mutex)(&data->mutex);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ if (val)
+ return -EINVAL;
+ return apds9306_intg_time_set(data, val2);
+ case IIO_CHAN_INFO_SCALE:
+ return apds9306_scale_set(data, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return apds9306_sampling_freq_set(data, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t apds9306_irq_handler(int irq, void *priv)
+{
+ struct iio_dev *indio_dev = priv;
+ struct apds9306_data *data = iio_priv(indio_dev);
+ int ret, status, int_ch;
+
+ /*
+ * The interrupt line is released and the interrupt flag is
+ * cleared as a result of reading the status register. All the
+ * status flags are cleared as a result of this read.
+ */
+ ret = regmap_read(data->regmap, APDS9306_MAIN_STATUS_REG, &status);
+ if (ret < 0) {
+ dev_err(data->dev, "status reg read failed\n");
+ return IRQ_HANDLED;
+ }
+
+ ret = regmap_field_read(data->regfield_int_src, &int_ch);
+ if (ret)
+ return ret;
+
+ if ((status & APDS9306_ALS_INT_STAT_MASK)) {
+ iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_LIGHT, int_ch,
+ IIO_EV_TYPE_THRESH, IIO_EV_DIR_EITHER),
+ iio_get_time_ns(indio_dev));
+ }
+
+ /*
+ * If a one-shot read through sysfs is underway at the same time
+ * as this interrupt handler is executing and a read data available
+ * flag was set, this flag is set to inform read_poll_timeout()
+ * to exit.
+ */
+ if ((status & APDS9306_ALS_DATA_STAT_MASK))
+ data->read_data_available = 1;
+
+ return IRQ_HANDLED;
+}
+
+static int apds9306_read_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ if (dir == IIO_EV_DIR_EITHER && info == IIO_EV_INFO_PERIOD)
+ ret = apds9306_event_period_get(data, val);
+ else
+ ret = apds9306_event_thresh_get(data, dir, val);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_EV_TYPE_THRESH_ADAPTIVE:
+ ret = apds9306_event_thresh_adaptive_get(data, val);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int apds9306_write_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+
+ guard(mutex)(&data->mutex);
+
+ switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ if (dir == IIO_EV_DIR_EITHER && info == IIO_EV_INFO_PERIOD)
+ return apds9306_event_period_set(data, val);
+ else
+ return apds9306_event_thresh_set(data, dir, val);
+ case IIO_EV_TYPE_THRESH_ADAPTIVE:
+ return apds9306_event_thresh_adaptive_set(data, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int apds9306_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+ int int_en, int_ch, ret;
+
+ guard(mutex)(&data->mutex);
+
+ switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ ret = regmap_field_read(data->regfield_int_src, &int_ch);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(data->regfield_int_en, &int_en);
+ if (ret)
+ return ret;
+ if (chan->type == IIO_LIGHT)
+ return int_en & int_ch;
+ else if (chan->type == IIO_INTENSITY)
+ return int_en & !int_ch;
+ return -EINVAL;
+ case IIO_EV_TYPE_THRESH_ADAPTIVE:
+ ret = regmap_field_read(data->regfield_int_thresh_var_en, &int_en);
+ if (ret)
+ return ret;
+ return int_en;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int apds9306_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ struct apds9306_data *data = iio_priv(indio_dev);
+ int ret, val;
+
+ state = !!state;
+
+ guard(mutex)(&data->mutex);
+
+ switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ /*
+ * If interrupt is enabled, the channel is set before enabling
+ * the interrupt. In case of disable, no need to switch
+ * channels. In case of different channel is selected while
+ * interrupt in on, just change the channel.
+ */
+ if (state) {
+ if (chan->type == IIO_LIGHT)
+ val = 1;
+ else if (chan->type == IIO_INTENSITY)
+ val = 0;
+ else
+ return -EINVAL;
+ ret = regmap_field_write(data->regfield_int_src, val);
+ if (ret)
+ return ret;
+ }
+ ret = regmap_field_read(data->regfield_int_en, &val);
+ if (ret)
+ return ret;
+ if (val == state)
+ return 0;
+ ret = regmap_field_write(data->regfield_int_en, state);
+ if (ret)
+ return ret;
+ if (state)
+ return apds9306_runtime_power_on(data->dev);
+ return apds9306_runtime_power_off(data->dev);
+ case IIO_EV_TYPE_THRESH_ADAPTIVE:
+ return regmap_field_write(data->regfield_int_thresh_var_en, state);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info apds9306_info_no_events = {
+ .read_avail = apds9306_read_avail,
+ .read_raw = apds9306_read_raw,
+ .write_raw = apds9306_write_raw,
+ .write_raw_get_fmt = apds9306_write_raw_get_fmt,
+};
+
+static const struct iio_info apds9306_info = {
+ .read_avail = apds9306_read_avail,
+ .read_raw = apds9306_read_raw,
+ .write_raw = apds9306_write_raw,
+ .write_raw_get_fmt = apds9306_write_raw_get_fmt,
+ .read_event_value = apds9306_read_event,
+ .write_event_value = apds9306_write_event,
+ .read_event_config = apds9306_read_event_config,
+ .write_event_config = apds9306_write_event_config,
+ .event_attrs = &apds9306_event_attr_group,
+};
+
+static int apds9306_init_iio_gts(struct apds9306_data *data)
+{
+ int i, ret, part_id;
+
+ ret = regmap_read(data->regmap, APDS9306_PART_ID_REG, &part_id);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(apds9306_gts_mul); i++) {
+ if (part_id == apds9306_gts_mul[i].part_id)
+ return devm_iio_init_iio_gts(data->dev,
+ apds9306_gts_mul[i].max_scale_int,
+ apds9306_gts_mul[i].max_scale_nano,
+ apds9306_gains, ARRAY_SIZE(apds9306_gains),
+ apds9306_itimes, ARRAY_SIZE(apds9306_itimes),
+ &data->gts);
+ }
+
+ return -ENXIO;
+}
+
+static void apds9306_powerdown(void *ptr)
+{
+ struct apds9306_data *data = (struct apds9306_data *)ptr;
+ int ret;
+
+ ret = regmap_field_write(data->regfield_int_thresh_var_en, 0);
+ if (ret)
+ return;
+ ret = regmap_field_write(data->regfield_int_en, 0);
+ if (ret)
+ return;
+
+ apds9306_power_state(data, false);
+}
+
+static int apds9306_device_init(struct apds9306_data *data)
+{
+ int ret;
+
+ ret = apds9306_init_iio_gts(data);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(data->regfield_intg_time,
+ APDS9306_MEAS_MODE_100MS);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(data->regfield_repeat_rate,
+ APDS9306_SAMP_FREQ_10HZ);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(data->regfield_gain, APDS9306_GSEL_3X);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(data->regfield_int_src, APDS9306_INT_CH_ALS);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(data->regfield_int_en, 0);
+ if (ret)
+ return ret;
+
+ return regmap_field_write(data->regfield_int_thresh_var_en, 0);
+}
+
+static int apds9306_pm_init(struct apds9306_data *data)
+{
+ struct device *dev = data->dev;
+ int ret;
+
+ ret = apds9306_power_state(data, true);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_set_active(dev);
+ if (ret)
+ return ret;
+
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(dev, 5000);
+ pm_runtime_use_autosuspend(dev);
+
+ return 0;
+}
+
+static int apds9306_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct apds9306_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+
+ mutex_init(&data->mutex);
+
+ data->regmap = devm_regmap_init_i2c(client, &apds9306_regmap);
+ if (IS_ERR(data->regmap))
+ return dev_err_probe(dev, PTR_ERR(data->regmap),
+ "regmap initialization failed\n");
+
+ data->dev = dev;
+ i2c_set_clientdata(client, indio_dev);
+
+ ret = apds9306_regfield_init(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "regfield initialization failed\n");
+
+ ret = devm_regulator_get_enable(dev, "vdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable regulator\n");
+
+ indio_dev->name = "apds9306";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ if (client->irq) {
+ indio_dev->info = &apds9306_info;
+ indio_dev->channels = apds9306_channels_with_events;
+ indio_dev->num_channels =
+ ARRAY_SIZE(apds9306_channels_with_events);
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ apds9306_irq_handler, IRQF_ONESHOT,
+ "apds9306_event", indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to assign interrupt.\n");
+ } else {
+ indio_dev->info = &apds9306_info_no_events;
+ indio_dev->channels = apds9306_channels_without_events;
+ indio_dev->num_channels = ARRAY_SIZE(apds9306_channels_without_events);
+ }
+
+ ret = apds9306_pm_init(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed pm init\n");
+
+ ret = apds9306_device_init(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to init device\n");
+
+ ret = devm_add_action_or_reset(dev, apds9306_powerdown, data);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add action or reset\n");
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed iio device registration\n");
+
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+
+static int apds9306_runtime_suspend(struct device *dev)
+{
+ struct apds9306_data *data = iio_priv(dev_get_drvdata(dev));
+
+ return apds9306_power_state(data, false);
+}
+
+static int apds9306_runtime_resume(struct device *dev)
+{
+ struct apds9306_data *data = iio_priv(dev_get_drvdata(dev));
+
+ return apds9306_power_state(data, true);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(apds9306_pm_ops,
+ apds9306_runtime_suspend,
+ apds9306_runtime_resume,
+ NULL);
+
+static const struct of_device_id apds9306_of_match[] = {
+ { .compatible = "avago,apds9306" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, apds9306_of_match);
+
+static struct i2c_driver apds9306_driver = {
+ .driver = {
+ .name = "apds9306",
+ .pm = pm_ptr(&apds9306_pm_ops),
+ .of_match_table = apds9306_of_match,
+ },
+ .probe = apds9306_probe,
+};
+module_i2c_driver(apds9306_driver);
+
+MODULE_AUTHOR("Subhajit Ghosh <[email protected]>");
+MODULE_DESCRIPTION("APDS9306 Ambient Light Sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_GTS_HELPER);
--
2.34.1
Adding device tree support for APDS9306 Ambient Light Sensor.
Updating datasheet hyperlinks.
Adding interrupt definition macro and header file.
Adding vdd-supply property.
Signed-off-by: Subhajit Ghosh <[email protected]>
---
v2 -> v5:
- Implemented changes as per previous reviews:
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
Link: https://lore.kernel.org/lkml/[email protected]/
---
.../bindings/iio/light/avago,apds9300.yaml | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
index c610780346e8..bee73a590424 100644
--- a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
@@ -4,19 +4,21 @@
$id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Avago Gesture/RGB/ALS/Proximity sensors
+title: Avago (Broadcom) Gesture/RGB/ALS/Proximity sensors
maintainers:
- Subhajit Ghosh <[email protected]>
description: |
- Datasheet: https://www.avagotech.com/docs/AV02-1077EN
- Datasheet: https://www.avagotech.com/docs/AV02-4191EN
+ Datasheet: https://docs.broadcom.com/doc/AV02-1077EN
+ Datasheet: https://docs.broadcom.com/doc/AV02-4191EN
+ Datasheet: https://docs.broadcom.com/doc/AV02-4755EN
properties:
compatible:
enum:
- avago,apds9300
+ - avago,apds9306
- avago,apds9960
reg:
@@ -25,6 +27,8 @@ properties:
interrupts:
maxItems: 1
+ vdd-supply: true
+
additionalProperties: false
required:
@@ -33,6 +37,8 @@ required:
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -41,7 +47,8 @@ examples:
compatible = "avago,apds9300";
reg = <0x39>;
interrupt-parent = <&gpio2>;
- interrupts = <29 8>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <®ulator_3v3>;
};
};
...
--
2.34.1
Squashing Avago (Broadcom) APDS9300 and APDS9960 schemas into one
file and removing the other. This is done as per the below review:
Link: https://lore.kernel.org/all/[email protected]/
This patch series adds the driver support and device tree binding schemas
for APDS9306 Ambient Light Sensor. It was pointed out in earlier reviews
that the schemas for APDS9300 and APDS9960 looks similar and should be
merged. This particular patch does the first operation of merging
APDS9300 and APDS9960 schema files.
Signed-off-by: Subhajit Ghosh <[email protected]>
---
v2 -> v5:
- Removed 'required' for Interrupts and 'oneOf' for compatibility strings
as per below reviews:
Link: https://lore.kernel.org/lkml/20231028142944.7e210eb6@jic23-huawei/
Link: https://lore.kernel.org/lkml/[email protected]/
---
.../bindings/iio/light/avago,apds9300.yaml | 11 +++--
.../bindings/iio/light/avago,apds9960.yaml | 44 -------------------
2 files changed, 7 insertions(+), 48 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
index 206af44f2c43..c610780346e8 100644
--- a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
@@ -4,17 +4,20 @@
$id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Avago APDS9300 ambient light sensor
+title: Avago Gesture/RGB/ALS/Proximity sensors
maintainers:
- - Jonathan Cameron <[email protected]>
+ - Subhajit Ghosh <[email protected]>
description: |
- Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+ Datasheet: https://www.avagotech.com/docs/AV02-1077EN
+ Datasheet: https://www.avagotech.com/docs/AV02-4191EN
properties:
compatible:
- const: avago,apds9300
+ enum:
+ - avago,apds9300
+ - avago,apds9960
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
deleted file mode 100644
index f06e0fda5629..000000000000
--- a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
-
-maintainers:
- - Matt Ranostay <[email protected]>
-
-description: |
- Datasheet at https://www.avagotech.com/docs/AV02-4191EN
-
-properties:
- compatible:
- const: avago,apds9960
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
-additionalProperties: false
-
-required:
- - compatible
- - reg
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- light-sensor@39 {
- compatible = "avago,apds9960";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <16 1>;
- };
- };
-...
--
2.34.1
On 21/01/2024 06:17, Subhajit Ghosh wrote:
> Squashing Avago (Broadcom) APDS9300 and APDS9960 schemas into one
> file and removing the other. This is done as per the below review:
> Link: https://lore.kernel.org/all/[email protected]/
>
> This patch series adds the driver support and device tree binding schemas
Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
Also, this is one commit, not patch series. Please write commit msg
explaining why and what you are doing.
> for APDS9306 Ambient Light Sensor. It was pointed out in earlier reviews
> that the schemas for APDS9300 and APDS9960 looks similar and should be
> merged. This particular patch does the first operation of merging
> APDS9300 and APDS9960 schema files.
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
> Signed-off-by: Subhajit Ghosh <[email protected]>
With changes above and what Jonathan asks:
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
Best regards,
Krzysztof
On 21/01/2024 06:17, Subhajit Ghosh wrote:
> Adding device tree support for APDS9306 Ambient Light Sensor.
> Updating datasheet hyperlinks.
> Adding interrupt definition macro and header file.
> Adding vdd-supply property.
Why? Do other devices have it?
> required:
> @@ -33,6 +37,8 @@ required:
>
> examples:
> - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -41,7 +47,8 @@ examples:
> compatible = "avago,apds9300";
> reg = <0x39>;
> interrupt-parent = <&gpio2>;
> - interrupts = <29 8>;
> + interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
Separate change.
Best regards,
Krzysztof
On 22/01/2024 11:07, Subhajit Ghosh wrote:
> On 22/1/24 20:21, Krzysztof Kozlowski wrote:
>> On 21/01/2024 06:17, Subhajit Ghosh wrote:
>>> Adding device tree support for APDS9306 Ambient Light Sensor.
>>> Updating datasheet hyperlinks.
>>> Adding interrupt definition macro and header file.
>>> Adding vdd-supply property.
>>
>> Why? Do other devices have it?
> Are you referring to vdd-supply? No, I guess, haven't checked actually.
> If other devices don't have, can you suggest the best way to handle that?
Commit msg should explain that. I assume all devices need it, so just
like Jonathan suggested: this might be separate patch.
Best regards,
Krzysztof
On 22/1/24 20:20, Krzysztof Kozlowski wrote:
> On 21/01/2024 06:17, Subhajit Ghosh wrote:
>> Squashing Avago (Broadcom) APDS9300 and APDS9960 schemas into one
>> file and removing the other. This is done as per the below review:
>> Link: https://lore.kernel.org/all/[email protected]/
>>
>> This patch series adds the driver support and device tree binding schemas
>
> Please do not use "This commit/patch/change", but imperative mood. See
> longer explanation here:
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
>
> Also, this is one commit, not patch series. Please write commit msg
> explaining why and what you are doing.
>
>> for APDS9306 Ambient Light Sensor. It was pointed out in earlier reviews
>> that the schemas for APDS9300 and APDS9960 looks similar and should be
>> merged. This particular patch does the first operation of merging
>> APDS9300 and APDS9960 schema files.
>
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>
>>
>> Signed-off-by: Subhajit Ghosh <[email protected]>
>
> With changes above and what Jonathan asks:
>
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>
>
> ---
>
> This is an automated instruction, just in case, because many review tags
> are being ignored. If you know the process, you can skip it (please do
> not feel offended by me posting it here - no bad intentions intended).
> If you do not know the process, here is a short explanation:
>
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions, under or above your Signed-off-by tag. Tag is "received", when
> provided in a message replied to you on the mailing list. Tools like b4
> can help here. However, there's no need to repost patches *only* to add
> the tags. The upstream maintainer will do that for tags received on the
> version they apply.
>
> https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
>
>
> Best regards,
> Krzysztof
>
Thank you so much Krysztof for the useful resources. Although I got the working knowledge from
"A Beginner's Guide to Linux Kernel Development" course offered by Linux Foundation but there are
gaps in my understanding. Time to study more.
Regards,
Subhajit Ghosh
On 22/1/24 20:21, Krzysztof Kozlowski wrote:
> On 21/01/2024 06:17, Subhajit Ghosh wrote:
>> Adding device tree support for APDS9306 Ambient Light Sensor.
>> Updating datasheet hyperlinks.
>> Adding interrupt definition macro and header file.
>> Adding vdd-supply property.
>
> Why? Do other devices have it?
Are you referring to vdd-supply? No, I guess, haven't checked actually.
If other devices don't have, can you suggest the best way to handle that?
>
>
>> required:
>> @@ -33,6 +37,8 @@ required:
>>
>> examples:
>> - |
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> i2c {
>> #address-cells = <1>;
>> #size-cells = <0>;
>> @@ -41,7 +47,8 @@ examples:
>> compatible = "avago,apds9300";
>> reg = <0x39>;
>> interrupt-parent = <&gpio2>;
>> - interrupts = <29 8>;
>> + interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
>
> Separate change.
Understood.
>
> Best regards,
> Krzysztof
>
Regards,
Subhajit Ghosh
On 22/1/24 21:34, Jonathan Cameron wrote:
>>>
>> Thank you for your review.
>
> Sorry for the inconsistencies!
>
> Jonathan
>>
No worries. I owe an an apology for sending patches almost 3 months apart,
as a consequence these things are bound to happen. I can't keep track of things
which happened 3 weeks back and I don't even deal with these much code!
Regards,
Subhajit Ghosh