From: Hui Liu <[email protected]>
Add definition for three LEDs to make sure they can
be enabled base on QCOM LPG LED driver.
Signed-off-by: Hui Liu <[email protected]>
---
Changes in v6:
- Updated the seperate LEDs nodes to multi-led setting.
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- Rephrased commit text, replaced qcs6490-idp to qcm6490-idp.
- Removed the unnecessary full.
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Removed "label" definition and added "function" definition.
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Rephrased commit text and updated the nodes to qcm6490-idp board file.
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v2:
- Rephrased commit text and updated the nodes to board file.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index 37c91fdf3ab9..c9e7ddcbd259 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7280.dtsi"
#include "pm7325.dtsi"
@@ -414,6 +415,33 @@ vreg_bob_3p296: bob {
};
};
+&pm8350c_pwm {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
---
base-commit: 17cb8a20bde66a520a2ca7aad1063e1ce7382240
change-id: 20231215-lpg-4aadd374811a
Best regards,
--
Hui Liu <[email protected]>