Currently, HCLKDIV is written to and then completed with an mb().
mb() ensure that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.
Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Andrew Halaney <[email protected]>
---
drivers/ufs/host/cdns-pltfrm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ufs/host/cdns-pltfrm.c b/drivers/ufs/host/cdns-pltfrm.c
index bb30267da471..66811d8d1929 100644
--- a/drivers/ufs/host/cdns-pltfrm.c
+++ b/drivers/ufs/host/cdns-pltfrm.c
@@ -136,7 +136,7 @@ static int cdns_ufs_set_hclkdiv(struct ufs_hba *hba)
* Make sure the register was updated,
* UniPro layer will not work with an incorrect value.
*/
- mb();
+ ufshcd_readl(hba, CDNS_UFS_REG_HCLKDIV);
return 0;
}
--
2.43.0