From: Claudiu Beznea <[email protected]>
Hi,
Series adds watchdog support for Renesas RZ/G3S (R9A08G045) SoC.
Patches do the following:
- patch 1/10 adds clock and reset support for watchdog
- patches 2-6/10 adds fixes and cleanup for the watchdog driver
- patch 7/10 adds suspend to RAM to the watchdog driver (to be used by
RZ/G3S)
- patch 8/10 documents the RZ/G3S support
- patches 9-10/10 add device tree support
It is expected that the clock and device tree support will go through
Geert's tree while the rest of the patches through the watchdog tree.
Thank you,
Claudiu Beznea
Claudiu Beznea (10):
clk: renesas: r9a08g045: Add clock and reset support for watchdog
watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
watchdog: rzg2l_wdt: Remove reset de-assert on probe/stop
watchdog: rzg2l_wdt: Remove comparison with zero
watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
watchdog: rzg2l_wdt: Add suspend/resume support
dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
.../bindings/watchdog/renesas,wdt.yaml | 1 +
arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 14 +++
.../boot/dts/renesas/rzg3s-smarc-som.dtsi | 5 +
drivers/clk/renesas/r9a08g045-cpg.c | 3 +
drivers/watchdog/rzg2l_wdt.c | 100 ++++++++++--------
5 files changed, 76 insertions(+), 47 deletions(-)
--
2.39.2