From: Chao Yu <[email protected]>
[ Upstream commit 956fa1ddc132e028f3b7d4cf17e6bfc8cb36c7fd ]
Let's check return value of f2fs_reserve_new_block() in do_recover_data()
rather than letting it fails silently.
Also refactoring check condition on return value of f2fs_reserve_new_block()
as below:
- trigger f2fs_bug_on() only for ENOSPC case;
- use do-while statement to avoid redundant codes;
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/recovery.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index b56d0f1078a7..16415c770b45 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -712,7 +712,16 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
*/
if (dest == NEW_ADDR) {
f2fs_truncate_data_blocks_range(&dn, 1);
- f2fs_reserve_new_block(&dn);
+ do {
+ err = f2fs_reserve_new_block(&dn);
+ if (err == -ENOSPC) {
+ f2fs_bug_on(sbi, 1);
+ break;
+ }
+ } while (err &&
+ IS_ENABLED(CONFIG_F2FS_FAULT_INJECTION));
+ if (err)
+ goto err;
continue;
}
@@ -720,12 +729,14 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
if (f2fs_is_valid_blkaddr(sbi, dest, META_POR)) {
if (src == NULL_ADDR) {
- err = f2fs_reserve_new_block(&dn);
- while (err &&
- IS_ENABLED(CONFIG_F2FS_FAULT_INJECTION))
+ do {
err = f2fs_reserve_new_block(&dn);
- /* We should not get -ENOSPC */
- f2fs_bug_on(sbi, err);
+ if (err == -ENOSPC) {
+ f2fs_bug_on(sbi, 1);
+ break;
+ }
+ } while (err &&
+ IS_ENABLED(CONFIG_F2FS_FAULT_INJECTION));
if (err)
goto err;
}
--
2.43.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit a31014ebad617868c246d3985ff80d891f03711e ]
Yet another PCI ID.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2d1df3654424..2276adc84478 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2504,6 +2504,8 @@ static const struct pci_device_id azx_ids[] = {
{ PCI_DEVICE_DATA(INTEL, HDA_LNL_P, AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE) },
/* Arrow Lake-S */
{ PCI_DEVICE_DATA(INTEL, HDA_ARL_S, AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE) },
+ /* Arrow Lake */
+ { PCI_DEVICE_DATA(INTEL, HDA_ARL, AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE) },
/* Apollolake (Broxton-P) */
{ PCI_DEVICE_DATA(INTEL, HDA_APL, AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON) },
/* Gemini-Lake */
--
2.43.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 7a9d6bbe8a663c817080be55d9fecf19a4a8fd8f ]
Same usual filters, SOF is required for DMIC and/or SoundWire support.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/hda/intel-dsp-config.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index 756fa0aa69bb..6a384b922e4f 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -521,6 +521,16 @@ static const struct config_entry config_table[] = {
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_MTL,
},
+ /* ArrowLake-S */
+ {
+ .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
+ .device = PCI_DEVICE_ID_INTEL_HDA_ARL_S,
+ },
+ /* ArrowLake */
+ {
+ .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
+ .device = PCI_DEVICE_ID_INTEL_HDA_ARL,
+ },
#endif
/* Lunar Lake */
--
2.43.0
From: Neil Armstrong <[email protected]>
[ Upstream commit 1b2d98bdd7b7c64265732f5f0dace4c52c9ba8a8 ]
The Qualcomm SM8650 platform comes with a DisplayPort controller
with a different base offset than the previous SM8550 SoC,
add support for this in the DisplayPort driver.
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/571132/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_display.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 1b88fb52726f..4f89c9939501 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -170,6 +170,11 @@ static const struct msm_dp_desc sm8350_dp_descs[] = {
{}
};
+static const struct msm_dp_desc sm8650_dp_descs[] = {
+ { .io_start = 0x0af54000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
+};
+
static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
{ .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
@@ -180,6 +185,7 @@ static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
{ .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
+ { .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs },
{}
};
--
2.43.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit dba3e701917a4cce92920f8ccb9fa4d4ee5ac07e ]
The device does not implement the control properly.
Fixes v4l2-compliance error:
info: checking control 'Power Line Frequency' (0x00980918)
fail: v4l2-test-controls.cpp(552): could not set valid menu item 3
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 08fcd2ffa727..4b5ea3501753 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2592,6 +2592,15 @@ static const struct usb_device_id uvc_ids[] = {
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_limited },
+ /* Chicony Electronics Co., Ltd Integrated Camera */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x04f2,
+ .idProduct = 0xb67c,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = UVC_PC_PROTOCOL_15,
+ .driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_uvc11 },
/* Chicony EasyCamera */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
--
2.43.0
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 85d2a31fe4d9be1555f621ead7a520d8791e0f74 ]
In all known platforms the ISP has dedicated IRQ lines, but for some
reason the driver uses IRQF_SHARED.
Supporting IRQF_SHARED properly requires handling interrupts even when
our device is disabled, and the driver does not handle this. To avoid
adding such code, and to be sure the driver won't accidentally be used
in a platform with shared interrupts, let's drop the IRQF_SHARED flag.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Adam Ford <[email protected]> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
index c41abd2833f1..4c4514e20673 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
@@ -542,7 +542,7 @@ static int rkisp1_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- ret = devm_request_irq(dev, irq, info->isrs[i].isr, IRQF_SHARED,
+ ret = devm_request_irq(dev, irq, info->isrs[i].isr, 0,
dev_driver_string(dev), dev);
if (ret) {
dev_err(dev, "request irq failed: %d\n", ret);
--
2.43.0
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 3eb7910e1b16a2c136be26a8380f21469225b2f6 ]
The IRQ handler rkisp1_isr() calls sub-handlers, all of which returns an
irqreturn_t value, but rkisp1_isr() ignores those values and always
returns IRQ_HANDLED.
Fix this by collecting the return values, and returning IRQ_HANDLED or
IRQ_NONE as appropriate.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Adam Ford <[email protected]> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/platform/rockchip/rkisp1/rkisp1-dev.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
index 4c4514e20673..22b2ae0e89c4 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
@@ -442,17 +442,25 @@ static int rkisp1_entities_register(struct rkisp1_device *rkisp1)
static irqreturn_t rkisp1_isr(int irq, void *ctx)
{
+ irqreturn_t ret = IRQ_NONE;
+
/*
* Call rkisp1_capture_isr() first to handle the frame that
* potentially completed using the current frame_sequence number before
* it is potentially incremented by rkisp1_isp_isr() in the vertical
* sync.
*/
- rkisp1_capture_isr(irq, ctx);
- rkisp1_isp_isr(irq, ctx);
- rkisp1_csi_isr(irq, ctx);
- return IRQ_HANDLED;
+ if (rkisp1_capture_isr(irq, ctx) == IRQ_HANDLED)
+ ret = IRQ_HANDLED;
+
+ if (rkisp1_isp_isr(irq, ctx) == IRQ_HANDLED)
+ ret = IRQ_HANDLED;
+
+ if (rkisp1_csi_isr(irq, ctx) == IRQ_HANDLED)
+ ret = IRQ_HANDLED;
+
+ return ret;
}
static const char * const px30_isp_clks[] = {
--
2.43.0
From: Laurent Pinchart <[email protected]>
[ Upstream commit 30d187cd74874aaf24e1b4a2dd2a64dc850c6b14 ]
V4L2 subdev operations have moved from operating on a
v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix
remaining incorrect references to pad config in function and variable
names.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/platform/renesas/vsp1/vsp1_brx.c | 40 +++++----
.../media/platform/renesas/vsp1/vsp1_clu.c | 3 +-
.../media/platform/renesas/vsp1/vsp1_entity.c | 85 +++++++++----------
.../media/platform/renesas/vsp1/vsp1_entity.h | 10 +--
.../media/platform/renesas/vsp1/vsp1_hgo.c | 4 +-
.../media/platform/renesas/vsp1/vsp1_hgt.c | 4 +-
.../media/platform/renesas/vsp1/vsp1_histo.c | 24 +++---
.../media/platform/renesas/vsp1/vsp1_hsit.c | 11 ++-
.../media/platform/renesas/vsp1/vsp1_lif.c | 2 +-
.../media/platform/renesas/vsp1/vsp1_rpf.c | 8 +-
.../media/platform/renesas/vsp1/vsp1_rwpf.c | 37 ++++----
.../media/platform/renesas/vsp1/vsp1_sru.c | 36 ++++----
.../media/platform/renesas/vsp1/vsp1_uds.c | 39 ++++-----
.../media/platform/renesas/vsp1/vsp1_uif.c | 24 +++---
.../media/platform/renesas/vsp1/vsp1_video.c | 4 +-
.../media/platform/renesas/vsp1/vsp1_wpf.c | 10 +--
16 files changed, 162 insertions(+), 179 deletions(-)
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_brx.c b/drivers/media/platform/renesas/vsp1/vsp1_brx.c
index 89385b4cabe5..23e815cea825 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_brx.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_brx.c
@@ -136,29 +136,28 @@ static int brx_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_brx *brx = to_brx(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
mutex_lock(&brx->entity.lock);
- config = vsp1_entity_get_pad_config(&brx->entity, sd_state,
- fmt->which);
- if (!config) {
+ state = vsp1_entity_get_state(&brx->entity, sd_state, fmt->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
- brx_try_format(brx, config, fmt->pad, &fmt->format);
+ brx_try_format(brx, state, fmt->pad, &fmt->format);
- format = vsp1_entity_get_pad_format(&brx->entity, config, fmt->pad);
+ format = vsp1_entity_get_pad_format(&brx->entity, state, fmt->pad);
*format = fmt->format;
/* Reset the compose rectangle. */
if (fmt->pad != brx->entity.source_pad) {
struct v4l2_rect *compose;
- compose = brx_get_compose(brx, config, fmt->pad);
+ compose = brx_get_compose(brx, state, fmt->pad);
compose->left = 0;
compose->top = 0;
compose->width = format->width;
@@ -171,7 +170,7 @@ static int brx_set_format(struct v4l2_subdev *subdev,
for (i = 0; i <= brx->entity.source_pad; ++i) {
format = vsp1_entity_get_pad_format(&brx->entity,
- config, i);
+ state, i);
format->code = fmt->format.code;
}
}
@@ -186,7 +185,7 @@ static int brx_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_brx *brx = to_brx(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
if (sel->pad == brx->entity.source_pad)
return -EINVAL;
@@ -200,13 +199,13 @@ static int brx_get_selection(struct v4l2_subdev *subdev,
return 0;
case V4L2_SEL_TGT_COMPOSE:
- config = vsp1_entity_get_pad_config(&brx->entity, sd_state,
- sel->which);
- if (!config)
+ state = vsp1_entity_get_state(&brx->entity, sd_state,
+ sel->which);
+ if (!state)
return -EINVAL;
mutex_lock(&brx->entity.lock);
- sel->r = *brx_get_compose(brx, config, sel->pad);
+ sel->r = *brx_get_compose(brx, state, sel->pad);
mutex_unlock(&brx->entity.lock);
return 0;
@@ -220,7 +219,7 @@ static int brx_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_brx *brx = to_brx(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *compose;
int ret = 0;
@@ -233,9 +232,8 @@ static int brx_set_selection(struct v4l2_subdev *subdev,
mutex_lock(&brx->entity.lock);
- config = vsp1_entity_get_pad_config(&brx->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&brx->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
@@ -244,7 +242,7 @@ static int brx_set_selection(struct v4l2_subdev *subdev,
* The compose rectangle top left corner must be inside the output
* frame.
*/
- format = vsp1_entity_get_pad_format(&brx->entity, config,
+ format = vsp1_entity_get_pad_format(&brx->entity, state,
brx->entity.source_pad);
sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
@@ -253,11 +251,11 @@ static int brx_set_selection(struct v4l2_subdev *subdev,
* Scaling isn't supported, the compose rectangle size must be identical
* to the sink format size.
*/
- format = vsp1_entity_get_pad_format(&brx->entity, config, sel->pad);
+ format = vsp1_entity_get_pad_format(&brx->entity, state, sel->pad);
sel->r.width = format->width;
sel->r.height = format->height;
- compose = brx_get_compose(brx, config, sel->pad);
+ compose = brx_get_compose(brx, state, sel->pad);
*compose = sel->r;
done:
@@ -293,7 +291,7 @@ static void brx_configure_stream(struct vsp1_entity *entity,
unsigned int flags;
unsigned int i;
- format = vsp1_entity_get_pad_format(&brx->entity, brx->entity.config,
+ format = vsp1_entity_get_pad_format(&brx->entity, brx->entity.state,
brx->entity.source_pad);
/*
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_clu.c b/drivers/media/platform/renesas/vsp1/vsp1_clu.c
index c5217fee24f1..50a5c0dc0e86 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_clu.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_clu.c
@@ -182,8 +182,7 @@ static void clu_configure_stream(struct vsp1_entity *entity,
* The yuv_mode can't be changed during streaming. Cache it internally
* for future runtime configuration calls.
*/
- format = vsp1_entity_get_pad_format(&clu->entity,
- clu->entity.config,
+ format = vsp1_entity_get_pad_format(&clu->entity, clu->entity.state,
CLU_PAD_SINK);
clu->yuv_mode = format->code == MEDIA_BUS_FMT_AYUV8_1X32;
}
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_entity.c b/drivers/media/platform/renesas/vsp1/vsp1_entity.c
index c31f05a80bb5..47413f5c4824 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_entity.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_entity.c
@@ -101,27 +101,26 @@ void vsp1_entity_configure_partition(struct vsp1_entity *entity,
*/
/**
- * vsp1_entity_get_pad_config - Get the pad configuration for an entity
+ * vsp1_entity_get_state - Get the subdev state for an entity
* @entity: the entity
* @sd_state: the TRY state
- * @which: configuration selector (ACTIVE or TRY)
+ * @which: state selector (ACTIVE or TRY)
*
* When called with which set to V4L2_SUBDEV_FORMAT_ACTIVE the caller must hold
* the entity lock to access the returned configuration.
*
- * Return the pad configuration requested by the which argument. The TRY
- * configuration is passed explicitly to the function through the cfg argument
- * and simply returned when requested. The ACTIVE configuration comes from the
- * entity structure.
+ * Return the subdev state requested by the which argument. The TRY state is
+ * passed explicitly to the function through the sd_state argument and simply
+ * returned when requested. The ACTIVE state comes from the entity structure.
*/
struct v4l2_subdev_state *
-vsp1_entity_get_pad_config(struct vsp1_entity *entity,
- struct v4l2_subdev_state *sd_state,
- enum v4l2_subdev_format_whence which)
+vsp1_entity_get_state(struct vsp1_entity *entity,
+ struct v4l2_subdev_state *sd_state,
+ enum v4l2_subdev_format_whence which)
{
switch (which) {
case V4L2_SUBDEV_FORMAT_ACTIVE:
- return entity->config;
+ return entity->state;
case V4L2_SUBDEV_FORMAT_TRY:
default:
return sd_state;
@@ -176,10 +175,11 @@ vsp1_entity_get_pad_selection(struct vsp1_entity *entity,
/*
* vsp1_entity_init_cfg - Initialize formats on all pads
* @subdev: V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
+ * @sd_state: V4L2 subdev state
*
- * Initialize all pad formats with default values in the given pad config. This
- * function can be used as a handler for the subdev pad::init_cfg operation.
+ * Initialize all pad formats with default values in the given subdev state.
+ * This function can be used as a handler for the subdev pad::init_cfg
+ * operation.
*/
int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
struct v4l2_subdev_state *sd_state)
@@ -202,7 +202,7 @@ int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
/*
* vsp1_subdev_get_pad_format - Subdev pad get_fmt handler
* @subdev: V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
+ * @sd_state: V4L2 subdev state
* @fmt: V4L2 subdev format
*
* This function implements the subdev get_fmt pad operation. It can be used as
@@ -213,14 +213,14 @@ int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_entity *entity = to_vsp1_entity(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
- config = vsp1_entity_get_pad_config(entity, sd_state, fmt->which);
- if (!config)
+ state = vsp1_entity_get_state(entity, sd_state, fmt->which);
+ if (!state)
return -EINVAL;
mutex_lock(&entity->lock);
- fmt->format = *vsp1_entity_get_pad_format(entity, config, fmt->pad);
+ fmt->format = *vsp1_entity_get_pad_format(entity, state, fmt->pad);
mutex_unlock(&entity->lock);
return 0;
@@ -229,7 +229,7 @@ int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
/*
* vsp1_subdev_enum_mbus_code - Subdev pad enum_mbus_code handler
* @subdev: V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
+ * @sd_state: V4L2 subdev state
* @code: Media bus code enumeration
* @codes: Array of supported media bus codes
* @ncodes: Number of supported media bus codes
@@ -252,7 +252,7 @@ int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev,
code->code = codes[code->index];
} else {
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
/*
@@ -262,13 +262,12 @@ int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev,
if (code->index)
return -EINVAL;
- config = vsp1_entity_get_pad_config(entity, sd_state,
- code->which);
- if (!config)
+ state = vsp1_entity_get_state(entity, sd_state, code->which);
+ if (!state)
return -EINVAL;
mutex_lock(&entity->lock);
- format = vsp1_entity_get_pad_format(entity, config, 0);
+ format = vsp1_entity_get_pad_format(entity, state, 0);
code->code = format->code;
mutex_unlock(&entity->lock);
}
@@ -279,7 +278,7 @@ int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev,
/*
* vsp1_subdev_enum_frame_size - Subdev pad enum_frame_size handler
* @subdev: V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
+ * @sd_state: V4L2 subdev state
* @fse: Frame size enumeration
* @min_width: Minimum image width
* @min_height: Minimum image height
@@ -298,15 +297,15 @@ int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev,
unsigned int max_width, unsigned int max_height)
{
struct vsp1_entity *entity = to_vsp1_entity(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
- config = vsp1_entity_get_pad_config(entity, sd_state, fse->which);
- if (!config)
+ state = vsp1_entity_get_state(entity, sd_state, fse->which);
+ if (!state)
return -EINVAL;
- format = vsp1_entity_get_pad_format(entity, config, fse->pad);
+ format = vsp1_entity_get_pad_format(entity, state, fse->pad);
mutex_lock(&entity->lock);
@@ -339,7 +338,7 @@ int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev,
/*
* vsp1_subdev_set_pad_format - Subdev pad set_fmt handler
* @subdev: V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
+ * @sd_state: V4L2 subdev state
* @fmt: V4L2 subdev format
* @codes: Array of supported media bus codes
* @ncodes: Number of supported media bus codes
@@ -362,7 +361,7 @@ int vsp1_subdev_set_pad_format(struct v4l2_subdev *subdev,
unsigned int max_width, unsigned int max_height)
{
struct vsp1_entity *entity = to_vsp1_entity(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *selection;
unsigned int i;
@@ -370,13 +369,13 @@ int vsp1_subdev_set_pad_format(struct v4l2_subdev *subdev,
mutex_lock(&entity->lock);
- config = vsp1_entity_get_pad_config(entity, sd_state, fmt->which);
- if (!config) {
+ state = vsp1_entity_get_state(entity, sd_state, fmt->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
- format = vsp1_entity_get_pad_format(entity, config, fmt->pad);
+ format = vsp1_entity_get_pad_format(entity, state, fmt->pad);
if (fmt->pad == entity->source_pad) {
/* The output format can't be modified. */
@@ -404,18 +403,18 @@ int vsp1_subdev_set_pad_format(struct v4l2_subdev *subdev,
fmt->format = *format;
/* Propagate the format to the source pad. */
- format = vsp1_entity_get_pad_format(entity, config, entity->source_pad);
+ format = vsp1_entity_get_pad_format(entity, state, entity->source_pad);
*format = fmt->format;
/* Reset the crop and compose rectangles. */
- selection = vsp1_entity_get_pad_selection(entity, config, fmt->pad,
+ selection = vsp1_entity_get_pad_selection(entity, state, fmt->pad,
V4L2_SEL_TGT_CROP);
selection->left = 0;
selection->top = 0;
selection->width = format->width;
selection->height = format->height;
- selection = vsp1_entity_get_pad_selection(entity, config, fmt->pad,
+ selection = vsp1_entity_get_pad_selection(entity, state, fmt->pad,
V4L2_SEL_TGT_COMPOSE);
selection->left = 0;
selection->top = 0;
@@ -672,18 +671,18 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
vsp1_entity_init_cfg(subdev, NULL);
/*
- * Allocate the pad configuration to store formats and selection
+ * Allocate the subdev state to store formats and selection
* rectangles.
*/
/*
* FIXME: Drop this call, drivers are not supposed to use
* __v4l2_subdev_state_alloc().
*/
- entity->config = __v4l2_subdev_state_alloc(&entity->subdev,
- "vsp1:config->lock", &key);
- if (IS_ERR(entity->config)) {
+ entity->state = __v4l2_subdev_state_alloc(&entity->subdev,
+ "vsp1:state->lock", &key);
+ if (IS_ERR(entity->state)) {
media_entity_cleanup(&entity->subdev.entity);
- return PTR_ERR(entity->config);
+ return PTR_ERR(entity->state);
}
return 0;
@@ -695,6 +694,6 @@ void vsp1_entity_destroy(struct vsp1_entity *entity)
entity->ops->destroy(entity);
if (entity->subdev.ctrl_handler)
v4l2_ctrl_handler_free(entity->subdev.ctrl_handler);
- __v4l2_subdev_state_free(entity->config);
+ __v4l2_subdev_state_free(entity->state);
media_entity_cleanup(&entity->subdev.entity);
}
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_entity.h b/drivers/media/platform/renesas/vsp1/vsp1_entity.h
index 17f98a6a972e..8c737cadee81 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_entity.h
+++ b/drivers/media/platform/renesas/vsp1/vsp1_entity.h
@@ -115,9 +115,9 @@ struct vsp1_entity {
unsigned int sink_pad;
struct v4l2_subdev subdev;
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
- struct mutex lock; /* Protects the pad config */
+ struct mutex lock; /* Protects the state */
};
static inline struct vsp1_entity *to_vsp1_entity(struct v4l2_subdev *subdev)
@@ -135,9 +135,9 @@ int vsp1_entity_link_setup(struct media_entity *entity,
const struct media_pad *remote, u32 flags);
struct v4l2_subdev_state *
-vsp1_entity_get_pad_config(struct vsp1_entity *entity,
- struct v4l2_subdev_state *sd_state,
- enum v4l2_subdev_format_whence which);
+vsp1_entity_get_state(struct vsp1_entity *entity,
+ struct v4l2_subdev_state *sd_state,
+ enum v4l2_subdev_format_whence which);
struct v4l2_mbus_framefmt *
vsp1_entity_get_pad_format(struct vsp1_entity *entity,
struct v4l2_subdev_state *sd_state,
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hgo.c b/drivers/media/platform/renesas/vsp1/vsp1_hgo.c
index e6492deb0a64..40c571a987ef 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_hgo.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_hgo.c
@@ -140,9 +140,9 @@ static void hgo_configure_stream(struct vsp1_entity *entity,
unsigned int hratio;
unsigned int vratio;
- crop = vsp1_entity_get_pad_selection(entity, entity->config,
+ crop = vsp1_entity_get_pad_selection(entity, entity->state,
HISTO_PAD_SINK, V4L2_SEL_TGT_CROP);
- compose = vsp1_entity_get_pad_selection(entity, entity->config,
+ compose = vsp1_entity_get_pad_selection(entity, entity->state,
HISTO_PAD_SINK,
V4L2_SEL_TGT_COMPOSE);
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hgt.c b/drivers/media/platform/renesas/vsp1/vsp1_hgt.c
index aa1c718e0453..8281b86874ab 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_hgt.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_hgt.c
@@ -139,9 +139,9 @@ static void hgt_configure_stream(struct vsp1_entity *entity,
u8 upper;
unsigned int i;
- crop = vsp1_entity_get_pad_selection(entity, entity->config,
+ crop = vsp1_entity_get_pad_selection(entity, entity->state,
HISTO_PAD_SINK, V4L2_SEL_TGT_CROP);
- compose = vsp1_entity_get_pad_selection(entity, entity->config,
+ compose = vsp1_entity_get_pad_selection(entity, entity->state,
HISTO_PAD_SINK,
V4L2_SEL_TGT_COMPOSE);
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_histo.c b/drivers/media/platform/renesas/vsp1/vsp1_histo.c
index f22449dd654c..71155282ca11 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_histo.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_histo.c
@@ -203,7 +203,7 @@ static int histo_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_histogram *histo = subdev_to_histo(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
int ret = 0;
@@ -213,9 +213,8 @@ static int histo_get_selection(struct v4l2_subdev *subdev,
mutex_lock(&histo->entity.lock);
- config = vsp1_entity_get_pad_config(&histo->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&histo->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
@@ -223,7 +222,7 @@ static int histo_get_selection(struct v4l2_subdev *subdev,
switch (sel->target) {
case V4L2_SEL_TGT_COMPOSE_BOUNDS:
case V4L2_SEL_TGT_COMPOSE_DEFAULT:
- crop = vsp1_entity_get_pad_selection(&histo->entity, config,
+ crop = vsp1_entity_get_pad_selection(&histo->entity, state,
HISTO_PAD_SINK,
V4L2_SEL_TGT_CROP);
sel->r.left = 0;
@@ -234,7 +233,7 @@ static int histo_get_selection(struct v4l2_subdev *subdev,
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
- format = vsp1_entity_get_pad_format(&histo->entity, config,
+ format = vsp1_entity_get_pad_format(&histo->entity, state,
HISTO_PAD_SINK);
sel->r.left = 0;
sel->r.top = 0;
@@ -244,7 +243,7 @@ static int histo_get_selection(struct v4l2_subdev *subdev,
case V4L2_SEL_TGT_COMPOSE:
case V4L2_SEL_TGT_CROP:
- sel->r = *vsp1_entity_get_pad_selection(&histo->entity, config,
+ sel->r = *vsp1_entity_get_pad_selection(&histo->entity, state,
sel->pad, sel->target);
break;
@@ -346,7 +345,7 @@ static int histo_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_histogram *histo = subdev_to_histo(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
int ret;
if (sel->pad != HISTO_PAD_SINK)
@@ -354,17 +353,16 @@ static int histo_set_selection(struct v4l2_subdev *subdev,
mutex_lock(&histo->entity.lock);
- config = vsp1_entity_get_pad_config(&histo->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&histo->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
if (sel->target == V4L2_SEL_TGT_CROP)
- ret = histo_set_crop(subdev, config, sel);
+ ret = histo_set_crop(subdev, state, sel);
else if (sel->target == V4L2_SEL_TGT_COMPOSE)
- ret = histo_set_compose(subdev, config, sel);
+ ret = histo_set_compose(subdev, state, sel);
else
ret = -EINVAL;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hsit.c b/drivers/media/platform/renesas/vsp1/vsp1_hsit.c
index 361a870380c2..6342ac7bdf54 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_hsit.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_hsit.c
@@ -66,20 +66,19 @@ static int hsit_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_hsit *hsit = to_hsit(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
mutex_lock(&hsit->entity.lock);
- config = vsp1_entity_get_pad_config(&hsit->entity, sd_state,
- fmt->which);
- if (!config) {
+ state = vsp1_entity_get_state(&hsit->entity, sd_state, fmt->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
- format = vsp1_entity_get_pad_format(&hsit->entity, config, fmt->pad);
+ format = vsp1_entity_get_pad_format(&hsit->entity, state, fmt->pad);
if (fmt->pad == HSIT_PAD_SOURCE) {
/*
@@ -102,7 +101,7 @@ static int hsit_set_format(struct v4l2_subdev *subdev,
fmt->format = *format;
/* Propagate the format to the source pad. */
- format = vsp1_entity_get_pad_format(&hsit->entity, config,
+ format = vsp1_entity_get_pad_format(&hsit->entity, state,
HSIT_PAD_SOURCE);
*format = fmt->format;
format->code = hsit->inverse ? MEDIA_BUS_FMT_ARGB8888_1X32
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_lif.c b/drivers/media/platform/renesas/vsp1/vsp1_lif.c
index 0ab2e0c70474..75c24df41a7a 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_lif.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_lif.c
@@ -94,7 +94,7 @@ static void lif_configure_stream(struct vsp1_entity *entity,
unsigned int obth;
unsigned int lbth;
- format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config,
+ format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.state,
LIF_PAD_SOURCE);
switch (entity->vsp1->version & VI6_IP_VERSION_MODEL_MASK) {
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c
index ea12c3f12c92..c47579efc65f 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c
@@ -81,10 +81,10 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
/* Format */
sink_format = vsp1_entity_get_pad_format(&rpf->entity,
- rpf->entity.config,
+ rpf->entity.state,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&rpf->entity,
- rpf->entity.config,
+ rpf->entity.state,
RWPF_PAD_SOURCE);
infmt = VI6_RPF_INFMT_CIPM
@@ -158,7 +158,7 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
const struct v4l2_rect *compose;
compose = vsp1_entity_get_pad_selection(pipe->brx,
- pipe->brx->config,
+ pipe->brx->state,
rpf->brx_input,
V4L2_SEL_TGT_COMPOSE);
left = compose->left;
@@ -302,7 +302,7 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
* offsets are needed, as planes 2 and 3 always have identical
* strides.
*/
- crop = *vsp1_rwpf_get_crop(rpf, rpf->entity.config);
+ crop = *vsp1_rwpf_get_crop(rpf, rpf->entity.state);
/*
* Partition Algorithm Control
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c
index e0f87c8103ca..1ec921fa5bdd 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c
@@ -62,15 +62,14 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
mutex_lock(&rwpf->entity.lock);
- config = vsp1_entity_get_pad_config(&rwpf->entity, sd_state,
- fmt->which);
- if (!config) {
+ state = vsp1_entity_get_state(&rwpf->entity, sd_state, fmt->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
@@ -81,7 +80,7 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
- format = vsp1_entity_get_pad_format(&rwpf->entity, config, fmt->pad);
+ format = vsp1_entity_get_pad_format(&rwpf->entity, state, fmt->pad);
if (fmt->pad == RWPF_PAD_SOURCE) {
/*
@@ -107,7 +106,7 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
struct v4l2_rect *crop;
/* Update the sink crop rectangle. */
- crop = vsp1_rwpf_get_crop(rwpf, config);
+ crop = vsp1_rwpf_get_crop(rwpf, state);
crop->left = 0;
crop->top = 0;
crop->width = fmt->format.width;
@@ -115,7 +114,7 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
}
/* Propagate the format to the source pad. */
- format = vsp1_entity_get_pad_format(&rwpf->entity, config,
+ format = vsp1_entity_get_pad_format(&rwpf->entity, state,
RWPF_PAD_SOURCE);
*format = fmt->format;
@@ -134,7 +133,7 @@ static int vsp1_rwpf_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
@@ -147,20 +146,19 @@ static int vsp1_rwpf_get_selection(struct v4l2_subdev *subdev,
mutex_lock(&rwpf->entity.lock);
- config = vsp1_entity_get_pad_config(&rwpf->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&rwpf->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
switch (sel->target) {
case V4L2_SEL_TGT_CROP:
- sel->r = *vsp1_rwpf_get_crop(rwpf, config);
+ sel->r = *vsp1_rwpf_get_crop(rwpf, state);
break;
case V4L2_SEL_TGT_CROP_BOUNDS:
- format = vsp1_entity_get_pad_format(&rwpf->entity, config,
+ format = vsp1_entity_get_pad_format(&rwpf->entity, state,
RWPF_PAD_SINK);
sel->r.left = 0;
sel->r.top = 0;
@@ -183,7 +181,7 @@ static int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
int ret = 0;
@@ -200,15 +198,14 @@ static int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
mutex_lock(&rwpf->entity.lock);
- config = vsp1_entity_get_pad_config(&rwpf->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&rwpf->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
/* Make sure the crop rectangle is entirely contained in the image. */
- format = vsp1_entity_get_pad_format(&rwpf->entity, config,
+ format = vsp1_entity_get_pad_format(&rwpf->entity, state,
RWPF_PAD_SINK);
/*
@@ -229,11 +226,11 @@ static int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
sel->r.height = min_t(unsigned int, sel->r.height,
format->height - sel->r.top);
- crop = vsp1_rwpf_get_crop(rwpf, config);
+ crop = vsp1_rwpf_get_crop(rwpf, state);
*crop = sel->r;
/* Propagate the format to the source pad. */
- format = vsp1_entity_get_pad_format(&rwpf->entity, config,
+ format = vsp1_entity_get_pad_format(&rwpf->entity, state,
RWPF_PAD_SOURCE);
format->width = crop->width;
format->height = crop->height;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_sru.c b/drivers/media/platform/renesas/vsp1/vsp1_sru.c
index b614a2aea461..2dd6f8575614 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_sru.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_sru.c
@@ -123,16 +123,15 @@ static int sru_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_sru *sru = to_sru(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
- config = vsp1_entity_get_pad_config(&sru->entity, sd_state,
- fse->which);
- if (!config)
+ state = vsp1_entity_get_state(&sru->entity, sd_state, fse->which);
+ if (!state)
return -EINVAL;
- format = vsp1_entity_get_pad_format(&sru->entity, config, SRU_PAD_SINK);
+ format = vsp1_entity_get_pad_format(&sru->entity, state, SRU_PAD_SINK);
mutex_lock(&sru->entity.lock);
@@ -221,31 +220,30 @@ static int sru_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_sru *sru = to_sru(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
mutex_lock(&sru->entity.lock);
- config = vsp1_entity_get_pad_config(&sru->entity, sd_state,
- fmt->which);
- if (!config) {
+ state = vsp1_entity_get_state(&sru->entity, sd_state, fmt->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
- sru_try_format(sru, config, fmt->pad, &fmt->format);
+ sru_try_format(sru, state, fmt->pad, &fmt->format);
- format = vsp1_entity_get_pad_format(&sru->entity, config, fmt->pad);
+ format = vsp1_entity_get_pad_format(&sru->entity, state, fmt->pad);
*format = fmt->format;
if (fmt->pad == SRU_PAD_SINK) {
/* Propagate the format to the source pad. */
- format = vsp1_entity_get_pad_format(&sru->entity, config,
+ format = vsp1_entity_get_pad_format(&sru->entity, state,
SRU_PAD_SOURCE);
*format = fmt->format;
- sru_try_format(sru, config, SRU_PAD_SOURCE, format);
+ sru_try_format(sru, state, SRU_PAD_SOURCE, format);
}
done:
@@ -280,9 +278,9 @@ static void sru_configure_stream(struct vsp1_entity *entity,
struct v4l2_mbus_framefmt *output;
u32 ctrl0;
- input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
+ input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.state,
SRU_PAD_SINK);
- output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
+ output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.state,
SRU_PAD_SOURCE);
if (input->code == MEDIA_BUS_FMT_ARGB8888_1X32)
@@ -310,9 +308,9 @@ static unsigned int sru_max_width(struct vsp1_entity *entity,
struct v4l2_mbus_framefmt *input;
struct v4l2_mbus_framefmt *output;
- input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
+ input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.state,
SRU_PAD_SINK);
- output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
+ output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.state,
SRU_PAD_SOURCE);
/*
@@ -336,9 +334,9 @@ static void sru_partition(struct vsp1_entity *entity,
struct v4l2_mbus_framefmt *input;
struct v4l2_mbus_framefmt *output;
- input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
+ input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.state,
SRU_PAD_SINK);
- output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config,
+ output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.state,
SRU_PAD_SOURCE);
/* Adapt if SRUx2 is enabled. */
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uds.c b/drivers/media/platform/renesas/vsp1/vsp1_uds.c
index 1c290cda005a..59ff4ae46cea 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_uds.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_uds.c
@@ -128,17 +128,15 @@ static int uds_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_uds *uds = to_uds(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
- config = vsp1_entity_get_pad_config(&uds->entity, sd_state,
- fse->which);
- if (!config)
+ state = vsp1_entity_get_state(&uds->entity, sd_state, fse->which);
+ if (!state)
return -EINVAL;
- format = vsp1_entity_get_pad_format(&uds->entity, config,
- UDS_PAD_SINK);
+ format = vsp1_entity_get_pad_format(&uds->entity, state, UDS_PAD_SINK);
mutex_lock(&uds->entity.lock);
@@ -205,31 +203,30 @@ static int uds_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_format *fmt)
{
struct vsp1_uds *uds = to_uds(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
mutex_lock(&uds->entity.lock);
- config = vsp1_entity_get_pad_config(&uds->entity, sd_state,
- fmt->which);
- if (!config) {
+ state = vsp1_entity_get_state(&uds->entity, sd_state, fmt->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
- uds_try_format(uds, config, fmt->pad, &fmt->format);
+ uds_try_format(uds, state, fmt->pad, &fmt->format);
- format = vsp1_entity_get_pad_format(&uds->entity, config, fmt->pad);
+ format = vsp1_entity_get_pad_format(&uds->entity, state, fmt->pad);
*format = fmt->format;
if (fmt->pad == UDS_PAD_SINK) {
/* Propagate the format to the source pad. */
- format = vsp1_entity_get_pad_format(&uds->entity, config,
+ format = vsp1_entity_get_pad_format(&uds->entity, state,
UDS_PAD_SOURCE);
*format = fmt->format;
- uds_try_format(uds, config, UDS_PAD_SOURCE, format);
+ uds_try_format(uds, state, UDS_PAD_SOURCE, format);
}
done:
@@ -269,9 +266,9 @@ static void uds_configure_stream(struct vsp1_entity *entity,
unsigned int vscale;
bool multitap;
- input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SINK);
- output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SOURCE);
hscale = uds_compute_ratio(input->width, output->width);
@@ -314,7 +311,7 @@ static void uds_configure_partition(struct vsp1_entity *entity,
struct vsp1_partition *partition = pipe->partition;
const struct v4l2_mbus_framefmt *output;
- output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SOURCE);
/* Input size clipping. */
@@ -339,9 +336,9 @@ static unsigned int uds_max_width(struct vsp1_entity *entity,
const struct v4l2_mbus_framefmt *input;
unsigned int hscale;
- input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SINK);
- output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SOURCE);
hscale = output->width / input->width;
@@ -381,9 +378,9 @@ static void uds_partition(struct vsp1_entity *entity,
partition->uds_sink = *window;
partition->uds_source = *window;
- input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SINK);
- output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+ output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.state,
UDS_PAD_SOURCE);
partition->uds_sink.width = window->width * input->width
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uif.c b/drivers/media/platform/renesas/vsp1/vsp1_uif.c
index 83d7f17df80e..d84d10f35090 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_uif.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_uif.c
@@ -86,7 +86,7 @@ static int uif_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_uif *uif = to_uif(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
int ret = 0;
@@ -95,9 +95,8 @@ static int uif_get_selection(struct v4l2_subdev *subdev,
mutex_lock(&uif->entity.lock);
- config = vsp1_entity_get_pad_config(&uif->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&uif->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
@@ -105,7 +104,7 @@ static int uif_get_selection(struct v4l2_subdev *subdev,
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
- format = vsp1_entity_get_pad_format(&uif->entity, config,
+ format = vsp1_entity_get_pad_format(&uif->entity, state,
UIF_PAD_SINK);
sel->r.left = 0;
sel->r.top = 0;
@@ -114,7 +113,7 @@ static int uif_get_selection(struct v4l2_subdev *subdev,
break;
case V4L2_SEL_TGT_CROP:
- sel->r = *vsp1_entity_get_pad_selection(&uif->entity, config,
+ sel->r = *vsp1_entity_get_pad_selection(&uif->entity, state,
sel->pad, sel->target);
break;
@@ -133,7 +132,7 @@ static int uif_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_selection *sel)
{
struct vsp1_uif *uif = to_uif(subdev);
- struct v4l2_subdev_state *config;
+ struct v4l2_subdev_state *state;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *selection;
int ret = 0;
@@ -144,15 +143,14 @@ static int uif_set_selection(struct v4l2_subdev *subdev,
mutex_lock(&uif->entity.lock);
- config = vsp1_entity_get_pad_config(&uif->entity, sd_state,
- sel->which);
- if (!config) {
+ state = vsp1_entity_get_state(&uif->entity, sd_state, sel->which);
+ if (!state) {
ret = -EINVAL;
goto done;
}
/* The crop rectangle must be inside the input frame. */
- format = vsp1_entity_get_pad_format(&uif->entity, config, UIF_PAD_SINK);
+ format = vsp1_entity_get_pad_format(&uif->entity, state, UIF_PAD_SINK);
sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
@@ -162,7 +160,7 @@ static int uif_set_selection(struct v4l2_subdev *subdev,
format->height - sel->r.top);
/* Store the crop rectangle. */
- selection = vsp1_entity_get_pad_selection(&uif->entity, config,
+ selection = vsp1_entity_get_pad_selection(&uif->entity, state,
sel->pad, V4L2_SEL_TGT_CROP);
*selection = sel->r;
@@ -206,7 +204,7 @@ static void uif_configure_stream(struct vsp1_entity *entity,
vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMPMR,
VI6_UIF_DISCOM_DOCMPMR_SEL(9));
- crop = vsp1_entity_get_pad_selection(entity, entity->config,
+ crop = vsp1_entity_get_pad_selection(entity, entity->state,
UIF_PAD_SINK, V4L2_SEL_TGT_CROP);
left = crop->left;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_video.c b/drivers/media/platform/renesas/vsp1/vsp1_video.c
index e9d5027761bb..5a9cb0e5640e 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_video.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_video.c
@@ -198,7 +198,7 @@ static void vsp1_video_calculate_partition(struct vsp1_pipeline *pipe,
* at the WPF sink.
*/
format = vsp1_entity_get_pad_format(&pipe->output->entity,
- pipe->output->entity.config,
+ pipe->output->entity.state,
RWPF_PAD_SINK);
/* A single partition simply processes the output size in full. */
@@ -263,7 +263,7 @@ static int vsp1_video_pipeline_setup_partitions(struct vsp1_pipeline *pipe)
* at the WPF sink.
*/
format = vsp1_entity_get_pad_format(&pipe->output->entity,
- pipe->output->entity.config,
+ pipe->output->entity.state,
RWPF_PAD_SINK);
div_size = format->width;
diff --git a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c
index cab4445eca69..9693aeab1cac 100644
--- a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c
+++ b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c
@@ -66,10 +66,10 @@ static int vsp1_wpf_set_rotation(struct vsp1_rwpf *wpf, unsigned int rotation)
}
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
- wpf->entity.config,
+ wpf->entity.state,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
- wpf->entity.config,
+ wpf->entity.state,
RWPF_PAD_SOURCE);
mutex_lock(&wpf->entity.lock);
@@ -246,10 +246,10 @@ static void wpf_configure_stream(struct vsp1_entity *entity,
int ret;
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
- wpf->entity.config,
+ wpf->entity.state,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
- wpf->entity.config,
+ wpf->entity.state,
RWPF_PAD_SOURCE);
/* Format */
@@ -384,7 +384,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity,
unsigned int i;
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
- wpf->entity.config,
+ wpf->entity.state,
RWPF_PAD_SINK);
width = sink_format->width;
height = sink_format->height;
--
2.43.0
From: Charlene Liu <[email protected]>
[ Upstream commit 885c71ad791c1709f668a37f701d33e6872a902f ]
Fix issue when override level bigger than default. Levels 5, 6, and 7
had zero stutter latency, this is because override level being
initialized after stutter latency inits.
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: Syed Hassan <[email protected]>
Reviewed-by: Allen Pan <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
index db06a5b749b4..279e7605a0a2 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
@@ -341,6 +341,9 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc,
break;
}
+ if (dml2->config.bbox_overrides.clks_table.num_states)
+ p->in_states->num_states = dml2->config.bbox_overrides.clks_table.num_states;
+
/* Override from passed values, if available */
for (i = 0; i < p->in_states->num_states; i++) {
if (dml2->config.bbox_overrides.sr_exit_latency_us) {
@@ -397,7 +400,6 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc,
}
/* Copy clocks tables entries, if available */
if (dml2->config.bbox_overrides.clks_table.num_states) {
- p->in_states->num_states = dml2->config.bbox_overrides.clks_table.num_states;
for (i = 0; i < dml2->config.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels; i++) {
p->in_states->state_array[i].dcfclk_mhz = dml2->config.bbox_overrides.clks_table.clk_entries[i].dcfclk_mhz;
--
2.43.0
From: Ilya Bakoulin <[email protected]>
[ Upstream commit 94bbf802efd0a8f13147d6664af6e653637340a8 ]
Changing PBN calculation to be more in line with spec. We don't need to
inflate PBN_NATIVE value by the 1.006 margin, since that is already
taken care of in the get_pbn_per_slot function.
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Ilya Bakoulin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
index f8e01ca09d96..a3b3aec05d6b 100644
--- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
+++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
@@ -1057,18 +1057,21 @@ static struct fixed31_32 get_pbn_from_bw_in_kbps(uint64_t kbps)
uint32_t denominator = 1;
/*
- * margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
+ * The 1.006 factor (margin 5300ppm + 300ppm ~ 0.6% as per spec) is not
+ * required when determining PBN/time slot utilization on the link between
+ * us and the branch, since that overhead is already accounted for in
+ * the get_pbn_per_slot function.
+ *
* The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on
* common multiplier to render an integer PBN for all link rate/lane
* counts combinations
* calculate
- * peak_kbps *= (1006/1000)
* peak_kbps *= (64/54)
- * peak_kbps *= 8 convert to bytes
+ * peak_kbps /= (8 * 1000) convert to bytes
*/
- numerator = 64 * PEAK_FACTOR_X1000;
- denominator = 54 * 8 * 1000 * 1000;
+ numerator = 64;
+ denominator = 54 * 8 * 1000;
kbps *= numerator;
peak_kbps = dc_fixpt_from_fraction(kbps, denominator);
--
2.43.0
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 870565f063a58576e8a4529f122cac4325c6b395 ]
In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.
This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.
It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Adam Ford <[email protected]> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../platform/rockchip/rkisp1/rkisp1-csi.c | 14 ++++++++++++-
.../platform/rockchip/rkisp1/rkisp1-isp.c | 20 ++++++++++++++++---
2 files changed, 30 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
index 6e17b2817e61..702adee83322 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
@@ -125,8 +125,20 @@ static void rkisp1_csi_disable(struct rkisp1_csi *csi)
struct rkisp1_device *rkisp1 = csi->rkisp1;
u32 val;
- /* Mask and clear interrupts. */
+ /* Mask MIPI interrupts. */
rkisp1_write(rkisp1, RKISP1_CIF_MIPI_IMSC, 0);
+
+ /* Flush posted writes */
+ rkisp1_read(rkisp1, RKISP1_CIF_MIPI_IMSC);
+
+ /*
+ * Wait until the IRQ handler has ended. The IRQ handler may get called
+ * even after this, but it will return immediately as the MIPI
+ * interrupts have been masked.
+ */
+ synchronize_irq(rkisp1->irqs[RKISP1_IRQ_MIPI]);
+
+ /* Clear MIPI interrupt status */
rkisp1_write(rkisp1, RKISP1_CIF_MIPI_ICR, ~0);
val = rkisp1_read(rkisp1, RKISP1_CIF_MIPI_CTRL);
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
index 88ca8b2283b7..61d4816186e7 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
@@ -254,11 +254,25 @@ static void rkisp1_isp_stop(struct rkisp1_isp *isp)
* ISP(mi) stop in mi frame end -> Stop ISP(mipi) ->
* Stop ISP(isp) ->wait for ISP isp off
*/
- /* stop and clear MI and ISP interrupts */
- rkisp1_write(rkisp1, RKISP1_CIF_ISP_IMSC, 0);
- rkisp1_write(rkisp1, RKISP1_CIF_ISP_ICR, ~0);
+ /* Mask MI and ISP interrupts */
+ rkisp1_write(rkisp1, RKISP1_CIF_ISP_IMSC, 0);
rkisp1_write(rkisp1, RKISP1_CIF_MI_IMSC, 0);
+
+ /* Flush posted writes */
+ rkisp1_read(rkisp1, RKISP1_CIF_MI_IMSC);
+
+ /*
+ * Wait until the IRQ handler has ended. The IRQ handler may get called
+ * even after this, but it will return immediately as the MI and ISP
+ * interrupts have been masked.
+ */
+ synchronize_irq(rkisp1->irqs[RKISP1_IRQ_ISP]);
+ if (rkisp1->irqs[RKISP1_IRQ_ISP] != rkisp1->irqs[RKISP1_IRQ_MI])
+ synchronize_irq(rkisp1->irqs[RKISP1_IRQ_MI]);
+
+ /* Clear MI and ISP interrupt status */
+ rkisp1_write(rkisp1, RKISP1_CIF_ISP_ICR, ~0);
rkisp1_write(rkisp1, RKISP1_CIF_MI_ICR, ~0);
/* stop ISP */
--
2.43.0
From: Kees Cook <[email protected]>
[ Upstream commit 4265eb062a7303e537ab3792ade31f424c3c5189 ]
Without visibility into the initializers for data->innr, GCC suspects
using it as an index could walk off the end of the various 14-element
arrays in data. Perform an explicit clamp to the array size. Silences
the following warning with GCC 12+:
./drivers/hwmon/pc87360.c: In function 'pc87360_update_device':
./drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
341 | data->in_max[i] = pc87360_read_value(data,
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
342 | LD_IN, i,
| ~~~~~~~~~
343 | PC87365_REG_IN_MAX);
| ~~~~~~~~~~~~~~~~~~~
./drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14
209 | u8 in_max[14]; /* Register value */
| ^~~~~~
Cc: Jim Cromie <[email protected]>
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[groeck: Added comment into code clarifying context]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pc87360.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 926ea1fe133c..9e9681b2e8c5 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -323,7 +323,11 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
}
/* Voltages */
- for (i = 0; i < data->innr; i++) {
+ /*
+ * The min() below does not have any practical meaning and is
+ * only needed to silence a warning observed with gcc 12+.
+ */
+ for (i = 0; i < min(data->innr, ARRAY_SIZE(data->in)); i++) {
data->in_status[i] = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
/* Clear bits */
--
2.43.0
From: Ming Qian <[email protected]>
[ Upstream commit f9c8ddce2fe3b767582f299d03fc8fb85943568c ]
mutext_lock should not be called in condition of wait_event, otherwise,
when CONFIG_DEBUG_ATOMIC_SLEEP is enabled, we may meet the following
warning:
do not call blocking ops when !TASK_RUNNING; state=2
WARNING: CPU: 5 PID: 741 at kernel/sched/core.c:9859
__might_sleep+0x80/0xa4
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc :
__might_sleep+0x80/0xa4 lr : __might_sleep+0x80/0xa4 sp : ffffffc0123738a0
x29: ffffffc0123738a0 x28: ffffffc009194c48 x27: ffffffc00bbc1050
x26: ffffff8814b282f0 x25: ffffff8814b280d0 x24: ffffff8814b28080
x23: 0000000000000001 x22: 0000000000000032 x21: ffffffc00bbc1000
x20: 000000000000011b x19: ffffffc009324670 x18: 00000000fffffffd
x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
x14: 00058b5b8b9aa1f1 x13: ffffffc00903cda0 x12: 00000000d744fcc9
x11: 000000000000001c x10: 00000000000009a0 x9 : ffffffc0090201f4
x8 : ffffff8828245000 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 00000000410fd080 x4 : 0000000000000002 x3 : ffffff8815aab4c8
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8828244600
Call trace:
__might_sleep+0x80/0xa4
mutex_lock+0x2c/0x80
sync_session_response+0x110/0x310
vpu_session_send_cmd+0x18c/0x244
vpu_session_start+0x38/0x70
vdec_start_session+0x1b4/0x3e0
vpu_vb2_start_streaming+0xa0/0x1c4
vb2_start_streaming+0x74/0x160
vb2_core_qbuf+0x488/0x650
vb2_qbuf+0x9c/0x100
v4l2_m2m_qbuf+0x7c/0x224
v4l2_m2m_ioctl_qbuf+0x20/0x2c
v4l_qbuf+0x50/0x6c
__video_do_ioctl+0x174/0x3f0
video_usercopy+0x210/0x7cc
video_ioctl2+0x20/0x30
v4l2_ioctl+0x48/0x6c
we need to refine check_is_responsed() to remove the mutext_lock, each
cmd has a monotonically increasing id, and cmds are executed
sequentially, so we can check the id of the last reponsed cmd, then
determine whether a command has been responded or not.
Signed-off-by: Ming Qian <[email protected]>
CC: Xiaolei Wang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/amphion/vpu.h | 3 ++-
drivers/media/platform/amphion/vpu_cmds.c | 28 ++++++++---------------
drivers/media/platform/amphion/vpu_v4l2.c | 1 +
3 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/drivers/media/platform/amphion/vpu.h b/drivers/media/platform/amphion/vpu.h
index 5a701f64289e..0246cf0ac3a8 100644
--- a/drivers/media/platform/amphion/vpu.h
+++ b/drivers/media/platform/amphion/vpu.h
@@ -154,7 +154,6 @@ struct vpu_core {
struct vpu_mbox tx_type;
struct vpu_mbox tx_data;
struct vpu_mbox rx;
- unsigned long cmd_seq;
wait_queue_head_t ack_wq;
struct completion cmp;
@@ -253,6 +252,8 @@ struct vpu_inst {
struct list_head cmd_q;
void *pending;
+ unsigned long cmd_seq;
+ atomic_long_t last_response_cmd;
struct vpu_inst_ops *ops;
const struct vpu_format *formats;
diff --git a/drivers/media/platform/amphion/vpu_cmds.c b/drivers/media/platform/amphion/vpu_cmds.c
index c2337812573e..5695f5c1cb3e 100644
--- a/drivers/media/platform/amphion/vpu_cmds.c
+++ b/drivers/media/platform/amphion/vpu_cmds.c
@@ -32,6 +32,7 @@ struct vpu_cmd_t {
struct vpu_cmd_request *request;
struct vpu_rpc_event *pkt;
unsigned long key;
+ atomic_long_t *last_response_cmd;
};
static struct vpu_cmd_request vpu_cmd_requests[] = {
@@ -115,6 +116,8 @@ static void vpu_free_cmd(struct vpu_cmd_t *cmd)
{
if (!cmd)
return;
+ if (cmd->last_response_cmd)
+ atomic_long_set(cmd->last_response_cmd, cmd->key);
vfree(cmd->pkt);
vfree(cmd);
}
@@ -172,7 +175,8 @@ static int vpu_request_cmd(struct vpu_inst *inst, u32 id, void *data,
return -ENOMEM;
mutex_lock(&core->cmd_lock);
- cmd->key = core->cmd_seq++;
+ cmd->key = ++inst->cmd_seq;
+ cmd->last_response_cmd = &inst->last_response_cmd;
if (key)
*key = cmd->key;
if (sync)
@@ -246,26 +250,12 @@ void vpu_clear_request(struct vpu_inst *inst)
static bool check_is_responsed(struct vpu_inst *inst, unsigned long key)
{
- struct vpu_core *core = inst->core;
- struct vpu_cmd_t *cmd;
- bool flag = true;
+ unsigned long last_response = atomic_long_read(&inst->last_response_cmd);
- mutex_lock(&core->cmd_lock);
- cmd = inst->pending;
- if (cmd && key == cmd->key) {
- flag = false;
- goto exit;
- }
- list_for_each_entry(cmd, &inst->cmd_q, list) {
- if (key == cmd->key) {
- flag = false;
- break;
- }
- }
-exit:
- mutex_unlock(&core->cmd_lock);
+ if (key <= last_response && (last_response - key) < (ULONG_MAX >> 1))
+ return true;
- return flag;
+ return false;
}
static int sync_session_response(struct vpu_inst *inst, unsigned long key, long timeout, int try)
diff --git a/drivers/media/platform/amphion/vpu_v4l2.c b/drivers/media/platform/amphion/vpu_v4l2.c
index 0f6e4c666440..d7e0de49b3dc 100644
--- a/drivers/media/platform/amphion/vpu_v4l2.c
+++ b/drivers/media/platform/amphion/vpu_v4l2.c
@@ -716,6 +716,7 @@ int vpu_v4l2_open(struct file *file, struct vpu_inst *inst)
func = &vpu->decoder;
atomic_set(&inst->ref_count, 0);
+ atomic_long_set(&inst->last_response_cmd, 0);
vpu_inst_get(inst);
inst->vpu = vpu;
inst->core = vpu_request_core(vpu, inst->type);
--
2.43.0
From: Alex Hung <[email protected]>
[ Upstream commit c09919e6ea5fefd49d8b7b54aa5b222937163108 ]
[WHY]
wb_enabled field is set to false before it is used, and the following
code will never be executed.
[HOW]
Setting wb_enable to false after all removal work is completed.
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Hung <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
index 4bdf105d1d71..5055af147c20 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
@@ -490,18 +490,13 @@ bool dc_stream_remove_writeback(struct dc *dc,
return false;
}
-// stream->writeback_info[dwb_pipe_inst].wb_enabled = false;
- for (i = 0; i < stream->num_wb_info; i++) {
- /*dynamic update*/
- if (stream->writeback_info[i].wb_enabled &&
- stream->writeback_info[i].dwb_pipe_inst == dwb_pipe_inst) {
- stream->writeback_info[i].wb_enabled = false;
- }
- }
-
/* remove writeback info for disabled writeback pipes from stream */
for (i = 0, j = 0; i < stream->num_wb_info; i++) {
if (stream->writeback_info[i].wb_enabled) {
+
+ if (stream->writeback_info[i].dwb_pipe_inst == dwb_pipe_inst)
+ stream->writeback_info[i].wb_enabled = false;
+
if (j < i)
/* trim the array */
memcpy(&stream->writeback_info[j], &stream->writeback_info[i],
--
2.43.0
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 1d3062fad9c7313fff9970a88e0538a24480ffb8 ]
smatch reports:
drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.
'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_file.c b/drivers/gpu/drm/drm_file.c
index 446458aca8e9..54a7103c1c0f 100644
--- a/drivers/gpu/drm/drm_file.c
+++ b/drivers/gpu/drm/drm_file.c
@@ -958,7 +958,7 @@ void drm_show_memory_stats(struct drm_printer *p, struct drm_file *file)
{
struct drm_gem_object *obj;
struct drm_memory_stats status = {};
- enum drm_gem_object_status supported_status;
+ enum drm_gem_object_status supported_status = 0;
int id;
spin_lock(&file->table_lock);
--
2.43.0
From: Alvin Lee <[email protected]>
[ Upstream commit dd4e4bb28843393065eed279e869fac248d03f0f ]
[Description]
For mode programming we want to extend the prefetch as much as possible
(up to oto, or as long as we can for equ) if we're not already applying
the 60us prefetch requirement. This is to avoid intermittent underflow
issues during prefetch.
The prefetch extension is applied under the following scenarios:
1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank)
2. We're using subvp or drr methods of p-state switch, in which case we
we don't care if prefetch takes up more of the blanking time
Mode programming typically chooses the smallest prefetch time possible
(i.e. highest bandwidth during prefetch) presumably to create margin between
p-states / c-states that happen in vblank and prefetch. Therefore we only
apply this prefetch extension when p-state in vblank is not required (UCLK
p-states take up the most vblank time).
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../dc/dml/dcn32/display_mode_vba_32.c | 3 ++
.../dc/dml/dcn32/display_mode_vba_util_32.c | 33 +++++++++++++++----
.../dc/dml/dcn32/display_mode_vba_util_32.h | 1 +
3 files changed, 31 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
index cbdfb762c10c..6c84b0fa40f4 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
@@ -813,6 +813,8 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman
(v->DRAMSpeedPerState[mode_lib->vba.VoltageLevel] <= MEM_STROBE_FREQ_MHZ ||
v->DCFCLKPerState[mode_lib->vba.VoltageLevel] <= DCFCLK_FREQ_EXTRA_PREFETCH_REQ_MHZ) ?
mode_lib->vba.ip.min_prefetch_in_strobe_us : 0,
+ mode_lib->vba.PrefetchModePerState[mode_lib->vba.VoltageLevel][mode_lib->vba.maxMpcComb] > 0 || mode_lib->vba.DRAMClockChangeRequirementFinal == false,
+
/* Output */
&v->DSTXAfterScaler[k],
&v->DSTYAfterScaler[k],
@@ -3317,6 +3319,7 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
v->SwathHeightCThisState[k], v->TWait,
(v->DRAMSpeedPerState[i] <= MEM_STROBE_FREQ_MHZ || v->DCFCLKState[i][j] <= DCFCLK_FREQ_EXTRA_PREFETCH_REQ_MHZ) ?
mode_lib->vba.ip.min_prefetch_in_strobe_us : 0,
+ mode_lib->vba.PrefetchModePerState[i][j] > 0 || mode_lib->vba.DRAMClockChangeRequirementFinal == false,
/* Output */
&v->dummy_vars.dml32_ModeSupportAndSystemConfigurationFull.DSTXAfterScaler[k],
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
index d940dfa5ae43..80fccd4999a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
@@ -3423,6 +3423,7 @@ bool dml32_CalculatePrefetchSchedule(
unsigned int SwathHeightC,
double TWait,
double TPreReq,
+ bool ExtendPrefetchIfPossible,
/* Output */
double *DSTXAfterScaler,
double *DSTYAfterScaler,
@@ -3892,12 +3893,32 @@ bool dml32_CalculatePrefetchSchedule(
/* Clamp to oto for bandwidth calculation */
LinesForPrefetchBandwidth = dst_y_prefetch_oto;
} else {
- *DestinationLinesForPrefetch = dst_y_prefetch_equ;
- TimeForFetchingMetaPTE = Tvm_equ;
- TimeForFetchingRowInVBlank = Tr0_equ;
- *PrefetchBandwidth = prefetch_bw_equ;
- /* Clamp to equ for bandwidth calculation */
- LinesForPrefetchBandwidth = dst_y_prefetch_equ;
+ /* For mode programming we want to extend the prefetch as much as possible
+ * (up to oto, or as long as we can for equ) if we're not already applying
+ * the 60us prefetch requirement. This is to avoid intermittent underflow
+ * issues during prefetch.
+ *
+ * The prefetch extension is applied under the following scenarios:
+ * 1. We're in prefetch mode > 0 (i.e. we don't support MCLK switch in blank)
+ * 2. We're using subvp or drr methods of p-state switch, in which case we
+ * we don't care if prefetch takes up more of the blanking time
+ *
+ * Mode programming typically chooses the smallest prefetch time possible
+ * (i.e. highest bandwidth during prefetch) presumably to create margin between
+ * p-states / c-states that happen in vblank and prefetch. Therefore we only
+ * apply this prefetch extension when p-state in vblank is not required (UCLK
+ * p-states take up the most vblank time).
+ */
+ if (ExtendPrefetchIfPossible && TPreReq == 0 && VStartup < MaxVStartup) {
+ MyError = true;
+ } else {
+ *DestinationLinesForPrefetch = dst_y_prefetch_equ;
+ TimeForFetchingMetaPTE = Tvm_equ;
+ TimeForFetchingRowInVBlank = Tr0_equ;
+ *PrefetchBandwidth = prefetch_bw_equ;
+ /* Clamp to equ for bandwidth calculation */
+ LinesForPrefetchBandwidth = dst_y_prefetch_equ;
+ }
}
*DestinationLinesToRequestVMInVBlank = dml_ceil(4.0 * TimeForFetchingMetaPTE / LineTime, 1.0) / 4.0;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h
index 592d174df6c6..5d34735df83d 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h
@@ -747,6 +747,7 @@ bool dml32_CalculatePrefetchSchedule(
unsigned int SwathHeightC,
double TWait,
double TPreReq,
+ bool ExtendPrefetchIfPossible,
/* Output */
double *DSTXAfterScaler,
double *DSTYAfterScaler,
--
2.43.0
From: Alvin Lee <[email protected]>
[ Upstream commit 9a902a9073c287353e25913c0761bfed49d75a88 ]
[Description]
- When we're in a no plane config, DCN is always asserting
P-State allow
- This creates a scenario where the P-State blackout can start
just as VUPDATE takes place and transitions the DCN config to
a one where one or more HUBP's are active which can result in
underflow
- To fix this issue, force p-state disallow and unforce after
the transition from no planes case -> one or more planes active
Reviewed-by: Samson Tam <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index 608221b0dd5d..c3c83178eb1e 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -1877,6 +1877,8 @@ void dcn20_program_front_end_for_ctx(
int i;
struct dce_hwseq *hws = dc->hwseq;
DC_LOGGER_INIT(dc->ctx->logger);
+ unsigned int prev_hubp_count = 0;
+ unsigned int hubp_count = 0;
if (resource_is_pipe_topology_changed(dc->current_state, context))
resource_log_pipe_topology_update(dc, context);
@@ -1894,6 +1896,20 @@ void dcn20_program_front_end_for_ctx(
}
}
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ if (dc->current_state->res_ctx.pipe_ctx[i].plane_state)
+ prev_hubp_count++;
+ if (context->res_ctx.pipe_ctx[i].plane_state)
+ hubp_count++;
+ }
+
+ if (prev_hubp_count == 0 && hubp_count > 0) {
+ if (dc->res_pool->hubbub->funcs->force_pstate_change_control)
+ dc->res_pool->hubbub->funcs->force_pstate_change_control(
+ dc->res_pool->hubbub, true, false);
+ udelay(500);
+ }
+
/* Set pipe update flags and lock pipes */
for (i = 0; i < dc->res_pool->pipe_count; i++)
dcn20_detect_pipe_changes(&dc->current_state->res_ctx.pipe_ctx[i],
@@ -2039,6 +2055,10 @@ void dcn20_post_unlock_program_front_end(
}
}
+ if (dc->res_pool->hubbub->funcs->force_pstate_change_control)
+ dc->res_pool->hubbub->funcs->force_pstate_change_control(
+ dc->res_pool->hubbub, false, false);
+
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
--
2.43.0
From: Michael Tretter <[email protected]>
[ Upstream commit 9e7dc39260edac180c206bb6149595a40eabae3e ]
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rockchip/rga/rga.c | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index f1c532a5802a..25f5b5eebf13 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -184,25 +184,16 @@ static int rga_setup_ctrls(struct rga_ctx *ctx)
static struct rga_fmt formats[] = {
{
.fourcc = V4L2_PIX_FMT_ARGB32,
- .color_swap = RGA_COLOR_RB_SWAP,
+ .color_swap = RGA_COLOR_ALPHA_SWAP,
.hw_format = RGA_COLOR_FMT_ABGR8888,
.depth = 32,
.uv_factor = 1,
.y_div = 1,
.x_div = 1,
},
- {
- .fourcc = V4L2_PIX_FMT_XRGB32,
- .color_swap = RGA_COLOR_RB_SWAP,
- .hw_format = RGA_COLOR_FMT_XBGR8888,
- .depth = 32,
- .uv_factor = 1,
- .y_div = 1,
- .x_div = 1,
- },
{
.fourcc = V4L2_PIX_FMT_ABGR32,
- .color_swap = RGA_COLOR_ALPHA_SWAP,
+ .color_swap = RGA_COLOR_RB_SWAP,
.hw_format = RGA_COLOR_FMT_ABGR8888,
.depth = 32,
.uv_factor = 1,
@@ -211,7 +202,7 @@ static struct rga_fmt formats[] = {
},
{
.fourcc = V4L2_PIX_FMT_XBGR32,
- .color_swap = RGA_COLOR_ALPHA_SWAP,
+ .color_swap = RGA_COLOR_RB_SWAP,
.hw_format = RGA_COLOR_FMT_XBGR8888,
.depth = 32,
.uv_factor = 1,
--
2.43.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 5ec42bf04d72fd6d0a6855810cc779e0ee31dfd7 ]
The PCI ID insertion follows the increasing order in the table, but
this hardware follows MTL (MeteorLake).
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/pci_ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 275799b5f535..97cc0baad0f4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -3065,6 +3065,7 @@
#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
+#define PCI_DEVICE_ID_INTEL_HDA_ARL 0x7728
#define PCI_DEVICE_ID_INTEL_HDA_RPL_S 0x7a50
#define PCI_DEVICE_ID_INTEL_HDA_ADL_S 0x7ad0
#define PCI_DEVICE_ID_INTEL_HDA_MTL 0x7e28
--
2.43.0
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit eaa647cdbf2e357b4a14903f2f1e47ed9c4f8df3 ]
Enable WB2 hardware block, enabling writeback support on this platform.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/570187/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
index 7742f52be859..562de67103bb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
@@ -32,6 +32,7 @@ static const struct dpu_mdp_cfg sm8450_mdp = {
[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
[DPU_CLK_CTRL_DMA3] = { .reg_off = 0x2c4, .bit_off = 8 },
+ [DPU_CLK_CTRL_WB2] = { .reg_off = 0x2bc, .bit_off = 16 },
[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
},
};
@@ -316,6 +317,21 @@ static const struct dpu_dsc_cfg sm8450_dsc[] = {
},
};
+static const struct dpu_wb_cfg sm8450_wb[] = {
+ {
+ .name = "wb_2", .id = WB_2,
+ .base = 0x65000, .len = 0x2c8,
+ .features = WB_SM8250_MASK,
+ .format_list = wb2_formats,
+ .num_formats = ARRAY_SIZE(wb2_formats),
+ .clk_ctrl = DPU_CLK_CTRL_WB2,
+ .xin_id = 6,
+ .vbif_idx = VBIF_RT,
+ .maxlinewidth = 4096,
+ .intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+ },
+};
+
static const struct dpu_intf_cfg sm8450_intf[] = {
{
.name = "intf_0", .id = INTF_0,
@@ -411,6 +427,8 @@ const struct dpu_mdss_cfg dpu_sm8450_cfg = {
.dsc = sm8450_dsc,
.merge_3d_count = ARRAY_SIZE(sm8450_merge_3d),
.merge_3d = sm8450_merge_3d,
+ .wb_count = ARRAY_SIZE(sm8450_wb),
+ .wb = sm8450_wb,
.intf_count = ARRAY_SIZE(sm8450_intf),
.intf = sm8450_intf,
.vbif_count = ARRAY_SIZE(sdm845_vbif),
--
2.43.0
From: Abhinav Kumar <[email protected]>
[ Upstream commit 79caf2f2202b9eaad3a5a726e4b33807f67d0f1b ]
For YUV cases, setting the required format bits was missed
out in the register programming. Lets fix it now in preparation
of adding YUV formats support for writeback.
changes in v2:
- dropped the fixes tag as its not a fix but adding
new functionality
Signed-off-by: Abhinav Kumar <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/571814/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
index 9668fb97c047..d49b3ef7689e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
@@ -87,6 +87,9 @@ static void dpu_hw_wb_setup_format(struct dpu_hw_wb *ctx,
dst_format |= BIT(14); /* DST_ALPHA_X */
}
+ if (DPU_FORMAT_IS_YUV(fmt))
+ dst_format |= BIT(15);
+
pattern = (fmt->element[3] << 24) |
(fmt->element[2] << 16) |
(fmt->element[1] << 8) |
--
2.43.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit 6180056b0e0c097dad5d1569dcd661eaf509ea43 ]
The device does not implement the power line frequency control
correctly. It is a UVC 1.5 device, but implements the control as a UVC
1.1 device.
Add the corresponding control mapping override.
Bus 003 Device 002: ID 2b7e:b752 SunplusIT Inc HD Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x2b7e
idProduct 0xb752
bcdDevice 0.04
iManufacturer 1 SunplusIT Inc
iProduct 2 HD Camera
iSerial 3 01.00.00
bNumConfigurations 1
Cc: Yunke Cao <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 4b5ea3501753..bbd90123a4e7 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -3003,6 +3003,15 @@ static const struct usb_device_id uvc_ids[] = {
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_INFO_QUIRK(UVC_QUIRK_FORCE_BPP) },
+ /* SunplusIT Inc HD Camera */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x2b7e,
+ .idProduct = 0xb752,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = UVC_PC_PROTOCOL_15,
+ .driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_uvc11 },
/* Lenovo Integrated Camera */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
--
2.43.0
From: Paloma Arellano <[email protected]>
[ Upstream commit 45284ff733e4caf6c118aae5131eb7e7cf3eea5a ]
Add a mutex lock to control vblank irq to synchronize vblank
enable/disable operations happening from different threads to prevent
race conditions while registering/unregistering the vblank irq callback.
v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a
parameter of dpu_encoder_phys.
-Switch from atomic refcnt to a simple int counter as mutex has
now been added
v3: Mistakenly did not change wording in last version. It is done now.
v2: Slightly changed wording of commit message
Signed-off-by: Paloma Arellano <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/571854/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 1 -
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 4 ++-
.../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 32 ++++++++++++------
.../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 33 ++++++++++++-------
4 files changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index ff0e3591b44d..289e4a615a08 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2500,7 +2500,6 @@ void dpu_encoder_phys_init(struct dpu_encoder_phys *phys_enc,
phys_enc->enc_spinlock = p->enc_spinlock;
phys_enc->enable_state = DPU_ENC_DISABLED;
- atomic_set(&phys_enc->vblank_refcount, 0);
atomic_set(&phys_enc->pending_kickoff_cnt, 0);
atomic_set(&phys_enc->pending_ctlstart_cnt, 0);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index 6f04c3d56e77..96bda57b6959 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -155,6 +155,7 @@ enum dpu_intr_idx {
* @hw_wb: Hardware interface to the wb registers
* @dpu_kms: Pointer to the dpu_kms top level
* @cached_mode: DRM mode cached at mode_set time, acted on in enable
+ * @vblank_ctl_lock: Vblank ctl mutex lock to protect vblank_refcount
* @enabled: Whether the encoder has enabled and running a mode
* @split_role: Role to play in a split-panel configuration
* @intf_mode: Interface mode
@@ -183,11 +184,12 @@ struct dpu_encoder_phys {
struct dpu_hw_wb *hw_wb;
struct dpu_kms *dpu_kms;
struct drm_display_mode cached_mode;
+ struct mutex vblank_ctl_lock;
enum dpu_enc_split_role split_role;
enum dpu_intf_mode intf_mode;
spinlock_t *enc_spinlock;
enum dpu_enc_enable_state enable_state;
- atomic_t vblank_refcount;
+ int vblank_refcount;
atomic_t vsync_cnt;
atomic_t underrun_cnt;
atomic_t pending_ctlstart_cnt;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index be185fe69793..2d788c5e26a8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -244,7 +244,8 @@ static int dpu_encoder_phys_cmd_control_vblank_irq(
return -EINVAL;
}
- refcount = atomic_read(&phys_enc->vblank_refcount);
+ mutex_lock(&phys_enc->vblank_ctl_lock);
+ refcount = phys_enc->vblank_refcount;
/* Slave encoders don't report vblank */
if (!dpu_encoder_phys_cmd_is_master(phys_enc))
@@ -260,16 +261,24 @@ static int dpu_encoder_phys_cmd_control_vblank_irq(
phys_enc->hw_pp->idx - PINGPONG_0,
enable ? "true" : "false", refcount);
- if (enable && atomic_inc_return(&phys_enc->vblank_refcount) == 1)
- ret = dpu_core_irq_register_callback(phys_enc->dpu_kms,
- phys_enc->irq[INTR_IDX_RDPTR],
- dpu_encoder_phys_cmd_te_rd_ptr_irq,
- phys_enc);
- else if (!enable && atomic_dec_return(&phys_enc->vblank_refcount) == 0)
- ret = dpu_core_irq_unregister_callback(phys_enc->dpu_kms,
- phys_enc->irq[INTR_IDX_RDPTR]);
+ if (enable) {
+ if (phys_enc->vblank_refcount == 0)
+ ret = dpu_core_irq_register_callback(phys_enc->dpu_kms,
+ phys_enc->irq[INTR_IDX_RDPTR],
+ dpu_encoder_phys_cmd_te_rd_ptr_irq,
+ phys_enc);
+ if (!ret)
+ phys_enc->vblank_refcount++;
+ } else if (!enable) {
+ if (phys_enc->vblank_refcount == 1)
+ ret = dpu_core_irq_unregister_callback(phys_enc->dpu_kms,
+ phys_enc->irq[INTR_IDX_RDPTR]);
+ if (!ret)
+ phys_enc->vblank_refcount--;
+ }
end:
+ mutex_unlock(&phys_enc->vblank_ctl_lock);
if (ret) {
DRM_ERROR("vblank irq err id:%u pp:%d ret:%d, enable %s/%d\n",
DRMID(phys_enc->parent),
@@ -285,7 +294,7 @@ static void dpu_encoder_phys_cmd_irq_control(struct dpu_encoder_phys *phys_enc,
{
trace_dpu_enc_phys_cmd_irq_ctrl(DRMID(phys_enc->parent),
phys_enc->hw_pp->idx - PINGPONG_0,
- enable, atomic_read(&phys_enc->vblank_refcount));
+ enable, phys_enc->vblank_refcount);
if (enable) {
dpu_core_irq_register_callback(phys_enc->dpu_kms,
@@ -763,6 +772,9 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
dpu_encoder_phys_init(phys_enc, p);
+ mutex_init(&phys_enc->vblank_ctl_lock);
+ phys_enc->vblank_refcount = 0;
+
dpu_encoder_phys_cmd_init_ops(&phys_enc->ops);
phys_enc->intf_mode = INTF_MODE_CMD;
cmd_enc->stream_sel = 0;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index a01fda711883..eeb0acf9665e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -364,7 +364,8 @@ static int dpu_encoder_phys_vid_control_vblank_irq(
int ret = 0;
int refcount;
- refcount = atomic_read(&phys_enc->vblank_refcount);
+ mutex_lock(&phys_enc->vblank_ctl_lock);
+ refcount = phys_enc->vblank_refcount;
/* Slave encoders don't report vblank */
if (!dpu_encoder_phys_vid_is_master(phys_enc))
@@ -377,18 +378,26 @@ static int dpu_encoder_phys_vid_control_vblank_irq(
}
DRM_DEBUG_VBL("id:%u enable=%d/%d\n", DRMID(phys_enc->parent), enable,
- atomic_read(&phys_enc->vblank_refcount));
+ refcount);
- if (enable && atomic_inc_return(&phys_enc->vblank_refcount) == 1)
- ret = dpu_core_irq_register_callback(phys_enc->dpu_kms,
- phys_enc->irq[INTR_IDX_VSYNC],
- dpu_encoder_phys_vid_vblank_irq,
- phys_enc);
- else if (!enable && atomic_dec_return(&phys_enc->vblank_refcount) == 0)
- ret = dpu_core_irq_unregister_callback(phys_enc->dpu_kms,
- phys_enc->irq[INTR_IDX_VSYNC]);
+ if (enable) {
+ if (phys_enc->vblank_refcount == 0)
+ ret = dpu_core_irq_register_callback(phys_enc->dpu_kms,
+ phys_enc->irq[INTR_IDX_VSYNC],
+ dpu_encoder_phys_vid_vblank_irq,
+ phys_enc);
+ if (!ret)
+ phys_enc->vblank_refcount++;
+ } else if (!enable) {
+ if (phys_enc->vblank_refcount == 1)
+ ret = dpu_core_irq_unregister_callback(phys_enc->dpu_kms,
+ phys_enc->irq[INTR_IDX_VSYNC]);
+ if (!ret)
+ phys_enc->vblank_refcount--;
+ }
end:
+ mutex_unlock(&phys_enc->vblank_ctl_lock);
if (ret) {
DRM_ERROR("failed: id:%u intf:%d ret:%d enable:%d refcnt:%d\n",
DRMID(phys_enc->parent),
@@ -618,7 +627,7 @@ static void dpu_encoder_phys_vid_irq_control(struct dpu_encoder_phys *phys_enc,
trace_dpu_enc_phys_vid_irq_ctrl(DRMID(phys_enc->parent),
phys_enc->hw_intf->idx - INTF_0,
enable,
- atomic_read(&phys_enc->vblank_refcount));
+ phys_enc->vblank_refcount);
if (enable) {
ret = dpu_encoder_phys_vid_control_vblank_irq(phys_enc, true);
@@ -713,6 +722,8 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
DPU_DEBUG_VIDENC(phys_enc, "\n");
dpu_encoder_phys_init(phys_enc, p);
+ mutex_init(&phys_enc->vblank_ctl_lock);
+ phys_enc->vblank_refcount = 0;
dpu_encoder_phys_vid_init_ops(&phys_enc->ops);
phys_enc->intf_mode = INTF_MODE_VIDEO;
--
2.43.0
From: "Wang, Beyond" <[email protected]>
[ Upstream commit 94aeb4117343d072e3a35b9595bcbfc0058ee724 ]
Issue: during evict or validate happened on amdgpu_bo, the 'from' and
'to' is always same in ftrace event of amdgpu_bo_move
where calling the 'trace_amdgpu_bo_move', the comment says move_notify
is called before move happens, but actually it is called after move
happens, here the new_mem is same as bo->resource
Fix: move trace_amdgpu_bo_move from move_notify to amdgpu_bo_move
Signed-off-by: Wang, Beyond <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 13 +------------
drivers/gpu/drm/amd/amdgpu/amdgpu_object.h | 4 +---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 5 +++--
3 files changed, 5 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index 5ad03f2afdb4..425cebcc5cbf 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -1245,19 +1245,15 @@ int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer,
* amdgpu_bo_move_notify - notification about a memory move
* @bo: pointer to a buffer object
* @evict: if this move is evicting the buffer from the graphics address space
- * @new_mem: new information of the bufer object
*
* Marks the corresponding &amdgpu_bo buffer object as invalid, also performs
* bookkeeping.
* TTM driver callback which is called when ttm moves a buffer.
*/
-void amdgpu_bo_move_notify(struct ttm_buffer_object *bo,
- bool evict,
- struct ttm_resource *new_mem)
+void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict)
{
struct amdgpu_device *adev = amdgpu_ttm_adev(bo->bdev);
struct amdgpu_bo *abo;
- struct ttm_resource *old_mem = bo->resource;
if (!amdgpu_bo_is_amdgpu_bo(bo))
return;
@@ -1274,13 +1270,6 @@ void amdgpu_bo_move_notify(struct ttm_buffer_object *bo,
/* remember the eviction */
if (evict)
atomic64_inc(&adev->num_evictions);
-
- /* update statistics */
- if (!new_mem)
- return;
-
- /* move_notify is called before move happens */
- trace_amdgpu_bo_move(abo, new_mem->mem_type, old_mem->mem_type);
}
void amdgpu_bo_get_memory(struct amdgpu_bo *bo,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
index d28e21baef16..a3ea8a82db23 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
@@ -344,9 +344,7 @@ int amdgpu_bo_set_metadata (struct amdgpu_bo *bo, void *metadata,
int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer,
size_t buffer_size, uint32_t *metadata_size,
uint64_t *flags);
-void amdgpu_bo_move_notify(struct ttm_buffer_object *bo,
- bool evict,
- struct ttm_resource *new_mem);
+void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict);
void amdgpu_bo_release_notify(struct ttm_buffer_object *bo);
vm_fault_t amdgpu_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
void amdgpu_bo_fence(struct amdgpu_bo *bo, struct dma_fence *fence,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index ab4a762aed5b..75c9fd2c6c2a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -545,10 +545,11 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict,
return r;
}
+ trace_amdgpu_bo_move(abo, new_mem->mem_type, old_mem->mem_type);
out:
/* update statistics */
atomic64_add(bo->base.size, &adev->num_bytes_moved);
- amdgpu_bo_move_notify(bo, evict, new_mem);
+ amdgpu_bo_move_notify(bo, evict);
return 0;
}
@@ -1553,7 +1554,7 @@ static int amdgpu_ttm_access_memory(struct ttm_buffer_object *bo,
static void
amdgpu_bo_delete_mem_notify(struct ttm_buffer_object *bo)
{
- amdgpu_bo_move_notify(bo, false, NULL);
+ amdgpu_bo_move_notify(bo, false);
}
static struct ttm_device_funcs amdgpu_bo_driver = {
--
2.43.0
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 0753874617de883c6d4da903142f334f76a75d70 ]
Store the IRQ lines used by the driver for easy access. These are needed
in future patches which fix IRQ race issues.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Adam Ford <[email protected]> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../platform/rockchip/rkisp1/rkisp1-common.h | 11 ++++++++++-
.../media/platform/rockchip/rkisp1/rkisp1-dev.c | 17 +++++++++++++----
2 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
index 1e7cea1bea5e..2d7f06281c39 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
@@ -61,6 +61,14 @@ struct dentry;
RKISP1_CIF_ISP_EXP_END | \
RKISP1_CIF_ISP_HIST_MEASURE_RDY)
+/* IRQ lines */
+enum rkisp1_irq_line {
+ RKISP1_IRQ_ISP = 0,
+ RKISP1_IRQ_MI,
+ RKISP1_IRQ_MIPI,
+ RKISP1_NUM_IRQS,
+};
+
/* enum for the resizer pads */
enum rkisp1_rsz_pad {
RKISP1_RSZ_PAD_SINK,
@@ -423,7 +431,6 @@ struct rkisp1_debug {
* struct rkisp1_device - ISP platform device
*
* @base_addr: base register address
- * @irq: the irq number
* @dev: a pointer to the struct device
* @clk_size: number of clocks
* @clks: array of clocks
@@ -441,6 +448,7 @@ struct rkisp1_debug {
* @stream_lock: serializes {start/stop}_streaming callbacks between the capture devices.
* @debug: debug params to be exposed on debugfs
* @info: version-specific ISP information
+ * @irqs: IRQ line numbers
*/
struct rkisp1_device {
void __iomem *base_addr;
@@ -461,6 +469,7 @@ struct rkisp1_device {
struct mutex stream_lock; /* serialize {start/stop}_streaming cb between capture devices */
struct rkisp1_debug debug;
const struct rkisp1_info *info;
+ int irqs[RKISP1_NUM_IRQS];
};
/*
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
index 22b2ae0e89c4..c3fa40976140 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
@@ -114,6 +114,7 @@
struct rkisp1_isr_data {
const char *name;
irqreturn_t (*isr)(int irq, void *ctx);
+ u32 line_mask;
};
/* ----------------------------------------------------------------------------
@@ -471,9 +472,9 @@ static const char * const px30_isp_clks[] = {
};
static const struct rkisp1_isr_data px30_isp_isrs[] = {
- { "isp", rkisp1_isp_isr },
- { "mi", rkisp1_capture_isr },
- { "mipi", rkisp1_csi_isr },
+ { "isp", rkisp1_isp_isr, BIT(RKISP1_IRQ_ISP) },
+ { "mi", rkisp1_capture_isr, BIT(RKISP1_IRQ_MI) },
+ { "mipi", rkisp1_csi_isr, BIT(RKISP1_IRQ_MIPI) },
};
static const struct rkisp1_info px30_isp_info = {
@@ -492,7 +493,7 @@ static const char * const rk3399_isp_clks[] = {
};
static const struct rkisp1_isr_data rk3399_isp_isrs[] = {
- { NULL, rkisp1_isr },
+ { NULL, rkisp1_isr, BIT(RKISP1_IRQ_ISP) | BIT(RKISP1_IRQ_MI) | BIT(RKISP1_IRQ_MIPI) },
};
static const struct rkisp1_info rk3399_isp_info = {
@@ -543,6 +544,9 @@ static int rkisp1_probe(struct platform_device *pdev)
if (IS_ERR(rkisp1->base_addr))
return PTR_ERR(rkisp1->base_addr);
+ for (unsigned int il = 0; il < ARRAY_SIZE(rkisp1->irqs); ++il)
+ rkisp1->irqs[il] = -1;
+
for (i = 0; i < info->isr_size; i++) {
irq = info->isrs[i].name
? platform_get_irq_byname(pdev, info->isrs[i].name)
@@ -550,6 +554,11 @@ static int rkisp1_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ for (unsigned int il = 0; il < ARRAY_SIZE(rkisp1->irqs); ++il) {
+ if (info->isrs[i].line_mask & BIT(il))
+ rkisp1->irqs[il] = irq;
+ }
+
ret = devm_request_irq(dev, irq, info->isrs[i].isr, 0,
dev_driver_string(dev), dev);
if (ret) {
--
2.43.0
From: Kuan-Wei Chiu <[email protected]>
[ Upstream commit 2fbabea626b6467eb4e6c4cb7a16523da12e43b4 ]
In cases where mapping of mpmu/apmu/apbc registers fails, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'pxa_unit' before returning.
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/mmp/clk-of-pxa168.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
index fb0df64cf053..c5a7ba1deaa3 100644
--- a/drivers/clk/mmp/clk-of-pxa168.c
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -308,18 +308,21 @@ static void __init pxa168_clk_init(struct device_node *np)
pxa_unit->mpmu_base = of_iomap(np, 0);
if (!pxa_unit->mpmu_base) {
pr_err("failed to map mpmu registers\n");
+ kfree(pxa_unit);
return;
}
pxa_unit->apmu_base = of_iomap(np, 1);
if (!pxa_unit->apmu_base) {
pr_err("failed to map apmu registers\n");
+ kfree(pxa_unit);
return;
}
pxa_unit->apbc_base = of_iomap(np, 2);
if (!pxa_unit->apbc_base) {
pr_err("failed to map apbc registers\n");
+ kfree(pxa_unit);
return;
}
--
2.43.0
From: Ben Dooks <[email protected]>
[ Upstream commit f77999887235f8c378af343df11a6bcedda5b284 ]
Add the necessary __acquires() and __releases() to the functions
that take and release the wdt lock to avoid the following sparse
warnings:
drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit
drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock
Signed-off-by: Ben Dooks <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/starfive-wdt.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
index 5f501b41faf9..49b38ecc092d 100644
--- a/drivers/watchdog/starfive-wdt.c
+++ b/drivers/watchdog/starfive-wdt.c
@@ -202,12 +202,14 @@ static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
/* Write unlock-key to unlock. Write other value to lock. */
static void starfive_wdt_unlock(struct starfive_wdt *wdt)
+ __acquires(&wdt->lock)
{
spin_lock(&wdt->lock);
writel(wdt->variant->unlock_key, wdt->base + wdt->variant->unlock);
}
static void starfive_wdt_lock(struct starfive_wdt *wdt)
+ __releases(&wdt->lock)
{
writel(~wdt->variant->unlock_key, wdt->base + wdt->variant->unlock);
spin_unlock(&wdt->lock);
--
2.43.0
From: Laurent Pinchart <[email protected]>
[ Upstream commit efa28efd9cba015f8c3d88123527c3c3cfcd13d0 ]
Supported media bus codes on the resizer sink pad are identical to the
ISP source pad. The .enum_mbus_code() handler thus delegates the
enumeration to the ISP's operation. This is problematic for two
reasons:
- Format enumeration on the ISP source pad is dependent on the format
configured on the ISP sink pad for the same subdev state (TRY or
ACTIVE), while format enumeration on the resizer sink pad should
return all formats supported by the resizer subdev, regardless of the
ISP configuration.
- Delegating the operation involves creating a fake v4l2_subdev_state on
the stack to pass to the ISP .enum_mbus_code() handler. This gets in
the way of evolution of both the ISP enumeration handler and, more
generally, the V4L2 subdev state infrastructure.
Fix those two issues by implementing format enumeration manually for the
resizer.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Paul Elder <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../platform/rockchip/rkisp1/rkisp1-resizer.c | 38 ++++++++++++-------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
index 28ecc7347d54..6297870ee9e9 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
@@ -335,12 +335,8 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
{
struct rkisp1_resizer *rsz =
container_of(sd, struct rkisp1_resizer, sd);
- struct v4l2_subdev_pad_config dummy_cfg;
- struct v4l2_subdev_state pad_state = {
- .pads = &dummy_cfg
- };
- u32 pad = code->pad;
- int ret;
+ unsigned int index = code->index;
+ unsigned int i;
if (code->pad == RKISP1_RSZ_PAD_SRC) {
/* supported mbus codes on the src are the same as in the capture */
@@ -360,15 +356,29 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
return 0;
}
- /* supported mbus codes on the sink pad are the same as isp src pad */
- code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO;
- ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code,
- &pad_state, code);
+ /*
+ * Supported mbus codes on the sink pad are the same as on the ISP
+ * source pad.
+ */
+ for (i = 0; ; i++) {
+ const struct rkisp1_mbus_info *fmt =
+ rkisp1_mbus_info_get_by_index(i);
- /* restore pad */
- code->pad = pad;
- code->flags = 0;
- return ret;
+ if (!fmt)
+ break;
+
+ if (!(fmt->direction & RKISP1_ISP_SD_SRC))
+ continue;
+
+ if (!index) {
+ code->code = fmt->mbus_code;
+ return 0;
+ }
+
+ index--;
+ }
+
+ return -EINVAL;
}
static int rkisp1_rsz_init_config(struct v4l2_subdev *sd,
--
2.43.0
From: Werner Fischer <[email protected]>
[ Upstream commit d12971849d71781c1e4ffd1117d4878ce233d319 ]
WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.
Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.
Watchdog tests have been successful with this patch with the following
systems:
IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Werner Fischer <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/it87_wdt.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index e888b1bdd1f2..8c1ee072f48b 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -256,6 +256,7 @@ static struct watchdog_device wdt_dev = {
static int __init it87_wdt_init(void)
{
u8 chip_rev;
+ u8 ctrl;
int rc;
rc = superio_enter();
@@ -315,7 +316,18 @@ static int __init it87_wdt_init(void)
superio_select(GPIO);
superio_outb(WDT_TOV1, WDTCFG);
- superio_outb(0x00, WDTCTRL);
+
+ switch (chip_type) {
+ case IT8784_ID:
+ case IT8786_ID:
+ ctrl = superio_inb(WDTCTRL);
+ ctrl &= 0x08;
+ superio_outb(ctrl, WDTCTRL);
+ break;
+ default:
+ superio_outb(0x00, WDTCTRL);
+ }
+
superio_exit();
if (timeout < 1 || timeout > max_units * 60) {
--
2.43.0
From: Xing Tong Wu <[email protected]>
[ Upstream commit 8b3800256abad20e91c2698607f9b28591407b19 ]
Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.
Signed-off-by: Xing Tong Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/nct6775-core.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c
index d928eb8ae5a3..92a49fafe2c0 100644
--- a/drivers/hwmon/nct6775-core.c
+++ b/drivers/hwmon/nct6775-core.c
@@ -2553,6 +2553,13 @@ store_pwm(struct device *dev, struct device_attribute *attr, const char *buf,
int err;
u16 reg;
+ /*
+ * The fan control mode should be set to manual if the user wants to adjust
+ * the fan speed. Otherwise, it will fail to set.
+ */
+ if (index == 0 && data->pwm_enable[nr] > manual)
+ return -EBUSY;
+
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
--
2.43.0
From: Oded Gabbay <[email protected]>
[ Upstream commit 42422993cf28d456778ee9168d73758ec037cd51 ]
Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C
device and should be detected and initialized as Gaudi2.
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/accel/habanalabs/common/device.c | 3 +++
drivers/accel/habanalabs/common/habanalabs.h | 2 ++
drivers/accel/habanalabs/common/habanalabs_drv.c | 3 +++
drivers/accel/habanalabs/common/mmu/mmu.c | 1 +
drivers/accel/habanalabs/common/sysfs.c | 3 +++
drivers/accel/habanalabs/include/hw_ip/pci/pci_general.h | 1 +
6 files changed, 13 insertions(+)
diff --git a/drivers/accel/habanalabs/common/device.c b/drivers/accel/habanalabs/common/device.c
index 9711e8fc979d..9e461c03e705 100644
--- a/drivers/accel/habanalabs/common/device.c
+++ b/drivers/accel/habanalabs/common/device.c
@@ -853,6 +853,9 @@ static int device_early_init(struct hl_device *hdev)
gaudi2_set_asic_funcs(hdev);
strscpy(hdev->asic_name, "GAUDI2B", sizeof(hdev->asic_name));
break;
+ case ASIC_GAUDI2C:
+ gaudi2_set_asic_funcs(hdev);
+ strscpy(hdev->asic_name, "GAUDI2C", sizeof(hdev->asic_name));
break;
default:
dev_err(hdev->dev, "Unrecognized ASIC type %d\n",
diff --git a/drivers/accel/habanalabs/common/habanalabs.h b/drivers/accel/habanalabs/common/habanalabs.h
index 1655c101c705..d0fd77bb6a74 100644
--- a/drivers/accel/habanalabs/common/habanalabs.h
+++ b/drivers/accel/habanalabs/common/habanalabs.h
@@ -1262,6 +1262,7 @@ struct hl_dec {
* @ASIC_GAUDI_SEC: Gaudi secured device (HL-2000).
* @ASIC_GAUDI2: Gaudi2 device.
* @ASIC_GAUDI2B: Gaudi2B device.
+ * @ASIC_GAUDI2C: Gaudi2C device.
*/
enum hl_asic_type {
ASIC_INVALID,
@@ -1270,6 +1271,7 @@ enum hl_asic_type {
ASIC_GAUDI_SEC,
ASIC_GAUDI2,
ASIC_GAUDI2B,
+ ASIC_GAUDI2C,
};
struct hl_cs_parser;
diff --git a/drivers/accel/habanalabs/common/habanalabs_drv.c b/drivers/accel/habanalabs/common/habanalabs_drv.c
index 306a5bc9bf89..51fb04bbe376 100644
--- a/drivers/accel/habanalabs/common/habanalabs_drv.c
+++ b/drivers/accel/habanalabs/common/habanalabs_drv.c
@@ -141,6 +141,9 @@ static enum hl_asic_type get_asic_type(struct hl_device *hdev)
case REV_ID_B:
asic_type = ASIC_GAUDI2B;
break;
+ case REV_ID_C:
+ asic_type = ASIC_GAUDI2C;
+ break;
default:
break;
}
diff --git a/drivers/accel/habanalabs/common/mmu/mmu.c b/drivers/accel/habanalabs/common/mmu/mmu.c
index b2145716c605..b654302a68fc 100644
--- a/drivers/accel/habanalabs/common/mmu/mmu.c
+++ b/drivers/accel/habanalabs/common/mmu/mmu.c
@@ -596,6 +596,7 @@ int hl_mmu_if_set_funcs(struct hl_device *hdev)
break;
case ASIC_GAUDI2:
case ASIC_GAUDI2B:
+ case ASIC_GAUDI2C:
/* MMUs in Gaudi2 are always host resident */
hl_mmu_v2_hr_set_funcs(hdev, &hdev->mmu_func[MMU_HR_PGT]);
break;
diff --git a/drivers/accel/habanalabs/common/sysfs.c b/drivers/accel/habanalabs/common/sysfs.c
index 01f89f029355..278606373055 100644
--- a/drivers/accel/habanalabs/common/sysfs.c
+++ b/drivers/accel/habanalabs/common/sysfs.c
@@ -251,6 +251,9 @@ static ssize_t device_type_show(struct device *dev,
case ASIC_GAUDI2B:
str = "GAUDI2B";
break;
+ case ASIC_GAUDI2C:
+ str = "GAUDI2C";
+ break;
default:
dev_err(hdev->dev, "Unrecognized ASIC type %d\n",
hdev->asic_type);
diff --git a/drivers/accel/habanalabs/include/hw_ip/pci/pci_general.h b/drivers/accel/habanalabs/include/hw_ip/pci/pci_general.h
index f5d497dc9bdc..4f951cada077 100644
--- a/drivers/accel/habanalabs/include/hw_ip/pci/pci_general.h
+++ b/drivers/accel/habanalabs/include/hw_ip/pci/pci_general.h
@@ -25,6 +25,7 @@ enum hl_revision_id {
REV_ID_INVALID = 0x00,
REV_ID_A = 0x01,
REV_ID_B = 0x02,
+ REV_ID_C = 0x03
};
#endif /* INCLUDE_PCI_GENERAL_H_ */
--
2.43.0
From: Chao Yu <[email protected]>
[ Upstream commit 4961acdd65c956e97c1a000c82d91a8c1cdbe44b ]
It needs to add missing gcing flag on page during block migration,
in order to garantee migrated data be persisted during checkpoint,
otherwise out-of-order persistency between data and node may cause
data corruption after SPOR.
Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag
gcing flag on page during file defragment").
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/compress.c | 4 +++-
fs/f2fs/file.c | 2 ++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 36e5dab6baae..62119f3f7206 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1036,8 +1036,10 @@ static void set_cluster_dirty(struct compress_ctx *cc)
int i;
for (i = 0; i < cc->cluster_size; i++)
- if (cc->rpages[i])
+ if (cc->rpages[i]) {
set_page_dirty(cc->rpages[i]);
+ set_page_private_gcing(cc->rpages[i]);
+ }
}
static int prepare_compress_overwrite(struct compress_ctx *cc,
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index e50363583f01..9d2cdae18877 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1317,6 +1317,7 @@ static int __clone_blkaddrs(struct inode *src_inode, struct inode *dst_inode,
}
memcpy_page(pdst, 0, psrc, 0, PAGE_SIZE);
set_page_dirty(pdst);
+ set_page_private_gcing(pdst);
f2fs_put_page(pdst, 1);
f2fs_put_page(psrc, 1);
@@ -4054,6 +4055,7 @@ static int redirty_blocks(struct inode *inode, pgoff_t page_idx, int len)
f2fs_bug_on(F2FS_I_SB(inode), !page);
set_page_dirty(page);
+ set_page_private_gcing(page);
f2fs_put_page(page, 1);
f2fs_put_page(page, 0);
}
--
2.43.0
From: Josip Pavic <[email protected]>
[ Upstream commit 6fb12518ca58412dc51054e2a7400afb41328d85 ]
[Why]
This variable currently overflows after about 71 minutes. This doesn't
cause any known functional issues but it does make debugging more
difficult.
[How]
Make it a 64-bit variable.
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Josip Pavic <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dc_hw_types.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
index e2a3aa8812df..811474f4419b 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
@@ -244,7 +244,7 @@ enum pixel_format {
#define DC_MAX_DIRTY_RECTS 3
struct dc_flip_addrs {
struct dc_plane_address address;
- unsigned int flip_timestamp_in_us;
+ unsigned long long flip_timestamp_in_us;
bool flip_immediate;
/* TODO: add flip duration for FreeSync */
bool triplebuffer_flips;
--
2.43.0
From: Alvin Lee <[email protected]>
[ Upstream commit dff45f03f508c92cd8eb2050e27b726726b8ae0b ]
[Description]
There is a corner case where the symclk otg flag is cleared
when disabling the phantom pipe for subvp (because the phantom
and main pipe share the same link). This is undesired because
we need the maintain the correct symclk otg flag state for
the main pipe.
For now only clear the flag only for HDMI signal type, since
it's only set for HDMI signal type (phantom is virtual). The
ideal solution is to not clear it if the stream is phantom but
currently there's a bug that doesn't allow us to do this. Once
this issue is fixed the proper fix can be implemented.
Reviewed-by: Samson Tam <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 3 ++-
drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 3 ++-
drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 3 ++-
drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c | 3 ++-
4 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
index 960a55e06375..c0d2e8454efc 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
@@ -2124,7 +2124,8 @@ static void dce110_reset_hw_ctx_wrap(
BREAK_TO_DEBUGGER();
}
pipe_ctx_old->stream_res.tg->funcs->disable_crtc(pipe_ctx_old->stream_res.tg);
- pipe_ctx_old->stream->link->phy_state.symclk_ref_cnts.otg = 0;
+ if (dc_is_hdmi_tmds_signal(pipe_ctx_old->stream->signal))
+ pipe_ctx_old->stream->link->phy_state.symclk_ref_cnts.otg = 0;
pipe_ctx_old->plane_res.mi->funcs->free_mem_input(
pipe_ctx_old->plane_res.mi, dc->current_state->stream_count);
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
index cdb903116eb7..1fc8436c8130 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
@@ -1057,7 +1057,8 @@ static void dcn10_reset_back_end_for_pipe(
if (pipe_ctx->stream_res.tg->funcs->set_drr)
pipe_ctx->stream_res.tg->funcs->set_drr(
pipe_ctx->stream_res.tg, NULL);
- pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0;
+ if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal))
+ pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0;
}
for (i = 0; i < dc->res_pool->pipe_count; i++)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index c3c83178eb1e..da0181fef411 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -2610,7 +2610,8 @@ static void dcn20_reset_back_end_for_pipe(
* the case where the same symclk is shared across multiple otg
* instances
*/
- link->phy_state.symclk_ref_cnts.otg = 0;
+ if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal))
+ link->phy_state.symclk_ref_cnts.otg = 0;
if (link->phy_state.symclk_state == SYMCLK_ON_TX_OFF) {
link_hwss->disable_link_output(link,
&pipe_ctx->link_res, pipe_ctx->stream->signal);
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c
index 97798cee876e..3a40b7359a30 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c
@@ -523,7 +523,8 @@ static void dcn31_reset_back_end_for_pipe(
if (pipe_ctx->stream_res.tg->funcs->set_odm_bypass)
pipe_ctx->stream_res.tg->funcs->set_odm_bypass(
pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing);
- pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0;
+ if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal))
+ pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0;
if (pipe_ctx->stream_res.tg->funcs->set_drr)
pipe_ctx->stream_res.tg->funcs->set_drr(
--
2.43.0
From: Kuan-Wei Chiu <[email protected]>
[ Upstream commit 21c0efbcb45cf94724d17b040ebc03fcd4a81f22 ]
In cases where imx_clk_is_resource_owned() returns false, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'clk_node' before returning.
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-scu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index be89180dd19c..e48a904c0013 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -886,8 +886,10 @@ struct clk_hw *__imx_clk_gpr_scu(const char *name, const char * const *parent_na
return ERR_PTR(-EINVAL);
}
- if (!imx_clk_is_resource_owned(rsrc_id))
+ if (!imx_clk_is_resource_owned(rsrc_id)) {
+ kfree(clk_node);
return NULL;
+ }
clk = kzalloc(sizeof(*clk), GFP_KERNEL);
if (!clk) {
--
2.43.0
From: Su Hui <[email protected]>
[ Upstream commit 09b4195021be69af1e1936cca995712a6d0f2562 ]
Error code is assigned to 'stat', return 'stat' rather than '-1'.
Signed-off-by: Su Hui <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/ddbridge/ddbridge-main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/ddbridge/ddbridge-main.c b/drivers/media/pci/ddbridge/ddbridge-main.c
index 91733ab9f58c..363badab7cf0 100644
--- a/drivers/media/pci/ddbridge/ddbridge-main.c
+++ b/drivers/media/pci/ddbridge/ddbridge-main.c
@@ -238,7 +238,7 @@ static int ddb_probe(struct pci_dev *pdev,
ddb_unmap(dev);
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
- return -1;
+ return stat;
}
/****************************************************************************/
--
2.43.0
From: Hans de Goede <[email protected]>
[ Upstream commit 3735228bbe3511f844e03dfcc4003fadb59dde23 ]
HTS must be more then width, so the 1080 value clearly is wrong,
this is then corrected with some weird math dividing clocks in
to_pixels_per_line() which results in the hts getting multiplied by 2,
resulting in 2160.
Instead just directly set hts to the correct value of 2160 and
drop to_pixels_per_line().
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov2740.c | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)
diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 24e468485fbf..6be22586c3d2 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -310,7 +310,7 @@ static const struct ov2740_mode supported_modes[] = {
{
.width = 1932,
.height = 1092,
- .hts = 1080,
+ .hts = 2160,
.vts_def = OV2740_VTS_DEF,
.vts_min = OV2740_VTS_MIN,
.reg_list = {
@@ -357,15 +357,6 @@ static u64 to_pixel_rate(u32 f_index)
return pixel_rate;
}
-static u64 to_pixels_per_line(u32 hts, u32 f_index)
-{
- u64 ppl = hts * to_pixel_rate(f_index);
-
- do_div(ppl, OV2740_SCLK);
-
- return ppl;
-}
-
static int ov2740_read_reg(struct ov2740 *ov2740, u16 reg, u16 len, u32 *val)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
@@ -598,8 +589,7 @@ static int ov2740_init_controls(struct ov2740 *ov2740)
V4L2_CID_VBLANK, vblank_min,
vblank_max, 1, vblank_default);
- h_blank = to_pixels_per_line(cur_mode->hts, cur_mode->link_freq_index);
- h_blank -= cur_mode->width;
+ h_blank = cur_mode->hts - cur_mode->width;
ov2740->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops,
V4L2_CID_HBLANK, h_blank, h_blank, 1,
h_blank);
@@ -842,8 +832,7 @@ static int ov2740_set_format(struct v4l2_subdev *sd,
mode->vts_min - mode->height,
OV2740_VTS_MAX - mode->height, 1, vblank_def);
__v4l2_ctrl_s_ctrl(ov2740->vblank, vblank_def);
- h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
- mode->width;
+ h_blank = mode->hts - mode->width;
__v4l2_ctrl_modify_range(ov2740->hblank, h_blank, h_blank, 1, h_blank);
return 0;
--
2.43.0
From: Gergo Koteles <[email protected]>
[ Upstream commit b5cb53fd32779f3a971c45bcd997ae2608aa1086 ]
The 14ARB7 has two tas2563 amplifier on i2c.
Connect it to the tas2781 driver.
Signed-off-by: Gergo Koteles <[email protected]>
Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 70b17b08d4ff..9606f2448fda 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6984,6 +6984,12 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc,
tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781");
}
+static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc,
+ const struct hda_fixup *fix, int action)
+{
+ tas2781_generic_fixup(cdc, action, "i2c", "INT8866");
+}
+
/* for alc295_fixup_hp_top_speakers */
#include "hp_x360_helper.c"
@@ -7454,6 +7460,7 @@ enum {
ALC236_FIXUP_DELL_DUAL_CODECS,
ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI,
ALC287_FIXUP_TAS2781_I2C,
+ ALC287_FIXUP_YOGA7_14ARB7_I2C,
ALC245_FIXUP_HP_MUTE_LED_COEFBIT,
ALC245_FIXUP_HP_X360_MUTE_LEDS,
ALC287_FIXUP_THINKPAD_I2S_SPK,
@@ -9568,6 +9575,12 @@ static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC269_FIXUP_THINKPAD_ACPI,
},
+ [ALC287_FIXUP_YOGA7_14ARB7_I2C] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = yoga7_14arb7_fixup_i2c,
+ .chained = true,
+ .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK,
+ },
[ALC245_FIXUP_HP_MUTE_LED_COEFBIT] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc245_fixup_hp_mute_led_coefbit,
@@ -10221,6 +10234,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
SND_PCI_QUIRK(0x17aa, 0x3855, "Legion 7 16ITHG6", ALC287_FIXUP_LEGION_16ITHG6),
SND_PCI_QUIRK(0x17aa, 0x3869, "Lenovo Yoga7 14IAL7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN),
+ SND_PCI_QUIRK(0x17aa, 0x3870, "Lenovo Yoga 7 14ARB7", ALC287_FIXUP_YOGA7_14ARB7_I2C),
SND_PCI_QUIRK(0x17aa, 0x387d, "Yoga S780-16 pro Quad AAC", ALC287_FIXUP_TAS2781_I2C),
SND_PCI_QUIRK(0x17aa, 0x387e, "Yoga S780-16 pro Quad YC", ALC287_FIXUP_TAS2781_I2C),
SND_PCI_QUIRK(0x17aa, 0x3881, "YB9 dual power mode2 YC", ALC287_FIXUP_TAS2781_I2C),
--
2.43.0
From: "Stanley.Yang" <[email protected]>
[ Upstream commit a32c6f7f5737cc7e31cd7ad5133f0d96fca12ea6 ]
The ecc_irq is disabled while GPU mode2 reset suspending process,
but not be enabled during GPU mode2 reset resume process.
Changed from V1:
only do sdma/gfx ras_late_init in aldebaran_mode2_restore_ip
delete amdgpu_ras_late_resume function
Changed from V2:
check umc ras supported before put ecc_irq
Signed-off-by: Stanley.Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/aldebaran.c | 26 +++++++++++++++++++++++++-
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 4 ++++
drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c | 5 +++++
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 4 ++++
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/aldebaran.c b/drivers/gpu/drm/amd/amdgpu/aldebaran.c
index 02f4c6f9d4f6..576067d66bb9 100644
--- a/drivers/gpu/drm/amd/amdgpu/aldebaran.c
+++ b/drivers/gpu/drm/amd/amdgpu/aldebaran.c
@@ -330,6 +330,7 @@ aldebaran_mode2_restore_hwcontext(struct amdgpu_reset_control *reset_ctl,
{
struct list_head *reset_device_list = reset_context->reset_device_list;
struct amdgpu_device *tmp_adev = NULL;
+ struct amdgpu_ras *con;
int r;
if (reset_device_list == NULL)
@@ -355,7 +356,30 @@ aldebaran_mode2_restore_hwcontext(struct amdgpu_reset_control *reset_ctl,
*/
amdgpu_register_gpu_instance(tmp_adev);
- /* Resume RAS */
+ /* Resume RAS, ecc_irq */
+ con = amdgpu_ras_get_context(tmp_adev);
+ if (!amdgpu_sriov_vf(tmp_adev) && con) {
+ if (tmp_adev->sdma.ras &&
+ tmp_adev->sdma.ras->ras_block.ras_late_init) {
+ r = tmp_adev->sdma.ras->ras_block.ras_late_init(tmp_adev,
+ &tmp_adev->sdma.ras->ras_block.ras_comm);
+ if (r) {
+ dev_err(tmp_adev->dev, "SDMA failed to execute ras_late_init! ret:%d\n", r);
+ goto end;
+ }
+ }
+
+ if (tmp_adev->gfx.ras &&
+ tmp_adev->gfx.ras->ras_block.ras_late_init) {
+ r = tmp_adev->gfx.ras->ras_block.ras_late_init(tmp_adev,
+ &tmp_adev->gfx.ras->ras_block.ras_comm);
+ if (r) {
+ dev_err(tmp_adev->dev, "GFX failed to execute ras_late_init! ret:%d\n", r);
+ goto end;
+ }
+ }
+ }
+
amdgpu_ras_resume(tmp_adev);
/* Update PSP FW topology after reset */
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
index a5a05c16c10d..6c5185608854 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
@@ -1041,6 +1041,10 @@ static int gmc_v10_0_hw_fini(void *handle)
amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0);
+ if (adev->gmc.ecc_irq.funcs &&
+ amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__UMC))
+ amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0);
+
return 0;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
index 23d7b548d13f..c9c653cfc765 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
@@ -941,6 +941,11 @@ static int gmc_v11_0_hw_fini(void *handle)
}
amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0);
+
+ if (adev->gmc.ecc_irq.funcs &&
+ amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__UMC))
+ amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0);
+
gmc_v11_0_gart_disable(adev);
return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
index 2ac5820e9c92..507d695bcc6b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -2380,6 +2380,10 @@ static int gmc_v9_0_hw_fini(void *handle)
amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0);
+ if (adev->gmc.ecc_irq.funcs &&
+ amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__UMC))
+ amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0);
+
return 0;
}
--
2.43.0
From: Meenakshikumar Somasundaram <[email protected]>
[ Upstream commit aa5dc05340eb97486a631ce6bccb8d020bf6b56b ]
[Why]
Fix minor issues in BW Allocation Phase2.
[How]
- In set_usb4_req_bw_req(), link->dpia_bw_alloc_config.response_ready
flag should be reset before writing DPCD REQUEST_BW.
- Fix the granularity for value of 2 in get_bw_granularity().
- Removed bandwidth allocation support display fw boot option as
the fw would read feature enable status from bios.
- Clean up DPIA_EST_BW_CHANGED and DPIA_BW_REQ_SUCCESS cases in
dpia_handle_bw_alloc_response().
- Removed allocate_usb4_bw and deallocate_usb4_bw.
- Optimized loop in get_lowest_dpia_index().
- Updated link_dp_dpia_allocate_usb4_bandwidth_for_stream() and
set_usb4_req_bw_req() to always issue request bw.
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: PeiChen Huang <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Meenakshikumar Somasundaram <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../dc/link/protocols/link_dp_dpia_bw.c | 221 ++++++++----------
.../dc/link/protocols/link_dp_dpia_bw.h | 4 +-
2 files changed, 101 insertions(+), 124 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
index 7581023daa47..d6e1f969bfd5 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
@@ -50,6 +50,7 @@ static bool get_bw_alloc_proceed_flag(struct dc_link *tmp)
&& tmp->hpd_status
&& tmp->dpia_bw_alloc_config.bw_alloc_enabled);
}
+
static void reset_bw_alloc_struct(struct dc_link *link)
{
link->dpia_bw_alloc_config.bw_alloc_enabled = false;
@@ -59,6 +60,11 @@ static void reset_bw_alloc_struct(struct dc_link *link)
link->dpia_bw_alloc_config.bw_granularity = 0;
link->dpia_bw_alloc_config.response_ready = false;
}
+
+#define BW_GRANULARITY_0 4 // 0.25 Gbps
+#define BW_GRANULARITY_1 2 // 0.5 Gbps
+#define BW_GRANULARITY_2 1 // 1 Gbps
+
static uint8_t get_bw_granularity(struct dc_link *link)
{
uint8_t bw_granularity = 0;
@@ -71,16 +77,20 @@ static uint8_t get_bw_granularity(struct dc_link *link)
switch (bw_granularity & 0x3) {
case 0:
- bw_granularity = 4;
+ bw_granularity = BW_GRANULARITY_0;
break;
case 1:
+ bw_granularity = BW_GRANULARITY_1;
+ break;
+ case 2:
default:
- bw_granularity = 2;
+ bw_granularity = BW_GRANULARITY_2;
break;
}
return bw_granularity;
}
+
static int get_estimated_bw(struct dc_link *link)
{
uint8_t bw_estimated_bw = 0;
@@ -93,31 +103,7 @@ static int get_estimated_bw(struct dc_link *link)
return bw_estimated_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
}
-static bool allocate_usb4_bw(int *stream_allocated_bw, int bw_needed, struct dc_link *link)
-{
- if (bw_needed > 0)
- *stream_allocated_bw += bw_needed;
-
- return true;
-}
-static bool deallocate_usb4_bw(int *stream_allocated_bw, int bw_to_dealloc, struct dc_link *link)
-{
- bool ret = false;
-
- if (*stream_allocated_bw > 0) {
- *stream_allocated_bw -= bw_to_dealloc;
- ret = true;
- } else {
- //Do nothing for now
- ret = true;
- }
- // Unplug so reset values
- if (!link->hpd_status)
- reset_bw_alloc_struct(link);
-
- return ret;
-}
/*
* Read all New BW alloc configuration ex: estimated_bw, allocated_bw,
* granuality, Driver_ID, CM_Group, & populate the BW allocation structs
@@ -128,7 +114,12 @@ static void init_usb4_bw_struct(struct dc_link *link)
// Init the known values
link->dpia_bw_alloc_config.bw_granularity = get_bw_granularity(link);
link->dpia_bw_alloc_config.estimated_bw = get_estimated_bw(link);
+
+ DC_LOG_DEBUG("%s: bw_granularity(%d), estimated_bw(%d)\n",
+ __func__, link->dpia_bw_alloc_config.bw_granularity,
+ link->dpia_bw_alloc_config.estimated_bw);
}
+
static uint8_t get_lowest_dpia_index(struct dc_link *link)
{
const struct dc *dc_struct = link->dc;
@@ -141,12 +132,15 @@ static uint8_t get_lowest_dpia_index(struct dc_link *link)
dc_struct->links[i]->ep_type != DISPLAY_ENDPOINT_USB4_DPIA)
continue;
- if (idx > dc_struct->links[i]->link_index)
+ if (idx > dc_struct->links[i]->link_index) {
idx = dc_struct->links[i]->link_index;
+ break;
+ }
}
return idx;
}
+
/*
* Get the Max Available BW or Max Estimated BW for each Host Router
*
@@ -186,6 +180,7 @@ static int get_host_router_total_bw(struct dc_link *link, uint8_t type)
return total_bw;
}
+
/*
* Cleanup function for when the dpia is unplugged to reset struct
* and perform any required clean up
@@ -194,42 +189,50 @@ static int get_host_router_total_bw(struct dc_link *link, uint8_t type)
*
* return: none
*/
-static bool dpia_bw_alloc_unplug(struct dc_link *link)
+static void dpia_bw_alloc_unplug(struct dc_link *link)
{
- if (!link)
- return true;
-
- return deallocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw,
- link->dpia_bw_alloc_config.sink_allocated_bw, link);
+ if (link) {
+ DC_LOG_DEBUG("%s: resetting bw alloc config for link(%d)\n",
+ __func__, link->link_index);
+ link->dpia_bw_alloc_config.sink_allocated_bw = 0;
+ reset_bw_alloc_struct(link);
+ }
}
+
static void set_usb4_req_bw_req(struct dc_link *link, int req_bw)
{
uint8_t requested_bw;
uint32_t temp;
- // 1. Add check for this corner case #1
- if (req_bw > link->dpia_bw_alloc_config.estimated_bw)
+ /* Error check whether request bw greater than allocated */
+ if (req_bw > link->dpia_bw_alloc_config.estimated_bw) {
+ DC_LOG_ERROR("%s: Request bw greater than estimated bw for link(%d)\n",
+ __func__, link->link_index);
req_bw = link->dpia_bw_alloc_config.estimated_bw;
+ }
temp = req_bw * link->dpia_bw_alloc_config.bw_granularity;
requested_bw = temp / Kbps_TO_Gbps;
- // Always make sure to add more to account for floating points
+ /* Always make sure to add more to account for floating points */
if (temp % Kbps_TO_Gbps)
++requested_bw;
- // 2. Add check for this corner case #2
+ /* Error check whether requested and allocated are equal */
req_bw = requested_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
- if (req_bw == link->dpia_bw_alloc_config.sink_allocated_bw)
- return;
+ if (req_bw == link->dpia_bw_alloc_config.sink_allocated_bw) {
+ DC_LOG_ERROR("%s: Request bw equals to allocated bw for link(%d)\n",
+ __func__, link->link_index);
+ }
- if (core_link_write_dpcd(
+ link->dpia_bw_alloc_config.response_ready = false; // Reset flag
+ core_link_write_dpcd(
link,
REQUESTED_BW,
&requested_bw,
- sizeof(uint8_t)) == DC_OK)
- link->dpia_bw_alloc_config.response_ready = false; // Reset flag
+ sizeof(uint8_t));
}
+
/*
* Return the response_ready flag from dc_link struct
*
@@ -241,6 +244,7 @@ static bool get_cm_response_ready_flag(struct dc_link *link)
{
return link->dpia_bw_alloc_config.response_ready;
}
+
// ------------------------------------------------------------------
// PUBLIC FUNCTIONS
// ------------------------------------------------------------------
@@ -277,27 +281,27 @@ bool link_dp_dpia_set_dptx_usb4_bw_alloc_support(struct dc_link *link)
DPTX_BW_ALLOCATION_MODE_CONTROL,
&response,
sizeof(uint8_t)) != DC_OK) {
- DC_LOG_DEBUG("%s: **** FAILURE Enabling DPtx BW Allocation Mode Support ***\n",
- __func__);
+ DC_LOG_DEBUG("%s: FAILURE Enabling DPtx BW Allocation Mode Support for link(%d)\n",
+ __func__, link->link_index);
} else {
// SUCCESS Enabled DPtx BW Allocation Mode Support
- link->dpia_bw_alloc_config.bw_alloc_enabled = true;
- DC_LOG_DEBUG("%s: **** SUCCESS Enabling DPtx BW Allocation Mode Support ***\n",
- __func__);
+ DC_LOG_DEBUG("%s: SUCCESS Enabling DPtx BW Allocation Mode Support for link(%d)\n",
+ __func__, link->link_index);
ret = true;
init_usb4_bw_struct(link);
+ link->dpia_bw_alloc_config.bw_alloc_enabled = true;
}
}
out:
return ret;
}
+
void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t result)
{
int bw_needed = 0;
int estimated = 0;
- int host_router_total_estimated_bw = 0;
if (!get_bw_alloc_proceed_flag((link)))
return;
@@ -306,14 +310,22 @@ void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t res
case DPIA_BW_REQ_FAILED:
- DC_LOG_DEBUG("%s: *** *** BW REQ FAILURE for DP-TX Request *** ***\n", __func__);
+ /*
+ * Ideally, we shouldn't run into this case as we always validate available
+ * bandwidth and request within that limit
+ */
+ estimated = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
- // Update the new Estimated BW value updated by CM
- link->dpia_bw_alloc_config.estimated_bw =
- bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
+ DC_LOG_ERROR("%s: BW REQ FAILURE for DP-TX Request for link(%d)\n",
+ __func__, link->link_index);
+ DC_LOG_ERROR("%s: current estimated_bw(%d), new estimated_bw(%d)\n",
+ __func__, link->dpia_bw_alloc_config.estimated_bw, estimated);
+ /* Update the new Estimated BW value updated by CM */
+ link->dpia_bw_alloc_config.estimated_bw = estimated;
+
+ /* Allocate the previously requested bandwidth */
set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.estimated_bw);
- link->dpia_bw_alloc_config.response_ready = false;
/*
* If FAIL then it is either:
@@ -326,68 +338,34 @@ void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t res
case DPIA_BW_REQ_SUCCESS:
- DC_LOG_DEBUG("%s: *** BW REQ SUCCESS for DP-TX Request ***\n", __func__);
-
- // 1. SUCCESS 1st time before any Pruning is done
- // 2. SUCCESS after prev. FAIL before any Pruning is done
- // 3. SUCCESS after Pruning is done but before enabling link
-
bw_needed = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
- // 1.
- if (!link->dpia_bw_alloc_config.sink_allocated_bw) {
-
- allocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw, bw_needed, link);
- link->dpia_bw_alloc_config.sink_verified_bw =
- link->dpia_bw_alloc_config.sink_allocated_bw;
+ DC_LOG_DEBUG("%s: BW REQ SUCCESS for DP-TX Request for link(%d)\n",
+ __func__, link->link_index);
+ DC_LOG_DEBUG("%s: current allocated_bw(%d), new allocated_bw(%d)\n",
+ __func__, link->dpia_bw_alloc_config.sink_allocated_bw, bw_needed);
- // SUCCESS from first attempt
- if (link->dpia_bw_alloc_config.sink_allocated_bw >
- link->dpia_bw_alloc_config.sink_max_bw)
- link->dpia_bw_alloc_config.sink_verified_bw =
- link->dpia_bw_alloc_config.sink_max_bw;
- }
- // 3.
- else if (link->dpia_bw_alloc_config.sink_allocated_bw) {
-
- // Find out how much do we need to de-alloc
- if (link->dpia_bw_alloc_config.sink_allocated_bw > bw_needed)
- deallocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw,
- link->dpia_bw_alloc_config.sink_allocated_bw - bw_needed, link);
- else
- allocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw,
- bw_needed - link->dpia_bw_alloc_config.sink_allocated_bw, link);
- }
-
- // 4. If this is the 2nd sink then any unused bw will be reallocated to master DPIA
- // => check if estimated_bw changed
+ link->dpia_bw_alloc_config.sink_allocated_bw = bw_needed;
link->dpia_bw_alloc_config.response_ready = true;
break;
case DPIA_EST_BW_CHANGED:
- DC_LOG_DEBUG("%s: *** ESTIMATED BW CHANGED for DP-TX Request ***\n", __func__);
-
estimated = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
- host_router_total_estimated_bw = get_host_router_total_bw(link, HOST_ROUTER_BW_ESTIMATED);
- // 1. If due to unplug of other sink
- if (estimated == host_router_total_estimated_bw) {
- // First update the estimated & max_bw fields
- if (link->dpia_bw_alloc_config.estimated_bw < estimated)
- link->dpia_bw_alloc_config.estimated_bw = estimated;
- }
- // 2. If due to realloc bw btw 2 dpia due to plug OR realloc unused Bw
- else {
- // We lost estimated bw usually due to plug event of other dpia
- link->dpia_bw_alloc_config.estimated_bw = estimated;
- }
+ DC_LOG_DEBUG("%s: ESTIMATED BW CHANGED for link(%d)\n",
+ __func__, link->link_index);
+ DC_LOG_DEBUG("%s: current estimated_bw(%d), new estimated_bw(%d)\n",
+ __func__, link->dpia_bw_alloc_config.estimated_bw, estimated);
+
+ link->dpia_bw_alloc_config.estimated_bw = estimated;
break;
case DPIA_BW_ALLOC_CAPS_CHANGED:
- DC_LOG_DEBUG("%s: *** BW ALLOC CAPABILITY CHANGED for DP-TX Request ***\n", __func__);
+ DC_LOG_ERROR("%s: BW ALLOC CAPABILITY CHANGED to Disabled for link(%d)\n",
+ __func__, link->link_index);
link->dpia_bw_alloc_config.bw_alloc_enabled = false;
break;
}
@@ -409,11 +387,11 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea
set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.sink_max_bw);
do {
- if (!(timeout > 0))
+ if (timeout > 0)
timeout--;
else
break;
- fsleep(10 * 1000);
+ msleep(10);
} while (!get_cm_response_ready_flag(link));
if (!timeout)
@@ -428,37 +406,36 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea
out:
return ret;
}
-int link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int req_bw)
+
+bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int req_bw)
{
- int ret = 0;
+ bool ret = false;
uint8_t timeout = 10;
+ DC_LOG_DEBUG("%s: ENTER: link(%d), hpd_status(%d), current allocated_bw(%d), req_bw(%d)\n",
+ __func__, link->link_index, link->hpd_status,
+ link->dpia_bw_alloc_config.sink_allocated_bw, req_bw);
+
if (!get_bw_alloc_proceed_flag(link))
goto out;
- /*
- * Sometimes stream uses same timing parameters as the already
- * allocated max sink bw so no need to re-alloc
- */
- if (req_bw != link->dpia_bw_alloc_config.sink_allocated_bw) {
- set_usb4_req_bw_req(link, req_bw);
- do {
- if (!(timeout > 0))
- timeout--;
- else
- break;
- udelay(10 * 1000);
- } while (!get_cm_response_ready_flag(link));
+ set_usb4_req_bw_req(link, req_bw);
+ do {
+ if (timeout > 0)
+ timeout--;
+ else
+ break;
+ msleep(10);
+ } while (!get_cm_response_ready_flag(link));
- if (!timeout)
- ret = 0;// ERROR TIMEOUT waiting for response for allocating bw
- else if (link->dpia_bw_alloc_config.sink_allocated_bw > 0)
- ret = get_host_router_total_bw(link, HOST_ROUTER_BW_ALLOCATED);
- }
+ if (timeout)
+ ret = true;
out:
+ DC_LOG_DEBUG("%s: EXIT: timeout(%d), ret(%d)\n", __func__, timeout, ret);
return ret;
}
+
bool dpia_validate_usb4_bw(struct dc_link **link, int *bw_needed_per_dpia, const unsigned int num_dpias)
{
bool ret = true;
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
index 7292690383ae..981bc4eb6120 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
@@ -59,9 +59,9 @@ bool link_dp_dpia_set_dptx_usb4_bw_alloc_support(struct dc_link *link);
* @link: pointer to the dc_link struct instance
* @req_bw: Bw requested by the stream
*
- * return: allocated bw else return 0
+ * return: true if allocated successfully
*/
-int link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int req_bw);
+bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int req_bw);
/*
* Handle the USB4 BW Allocation related functionality here:
--
2.43.0
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit c2949a49dfe960e952400029e14751dceff79d38 ]
Enable WB2 hardware block, enabling writeback support on this platform.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/570188/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
index 1709ba57f384..022b0408c24d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
@@ -31,6 +31,7 @@ static const struct dpu_mdp_cfg sm8350_mdp = {
[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
[DPU_CLK_CTRL_DMA3] = { .reg_off = 0x2c4, .bit_off = 8 },
+ [DPU_CLK_CTRL_WB2] = { .reg_off = 0x2bc, .bit_off = 16 },
[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
},
};
@@ -298,6 +299,21 @@ static const struct dpu_dsc_cfg sm8350_dsc[] = {
},
};
+static const struct dpu_wb_cfg sm8350_wb[] = {
+ {
+ .name = "wb_2", .id = WB_2,
+ .base = 0x65000, .len = 0x2c8,
+ .features = WB_SM8250_MASK,
+ .format_list = wb2_formats,
+ .num_formats = ARRAY_SIZE(wb2_formats),
+ .clk_ctrl = DPU_CLK_CTRL_WB2,
+ .xin_id = 6,
+ .vbif_idx = VBIF_RT,
+ .maxlinewidth = 4096,
+ .intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+ },
+};
+
static const struct dpu_intf_cfg sm8350_intf[] = {
{
.name = "intf_0", .id = INTF_0,
@@ -393,6 +409,8 @@ const struct dpu_mdss_cfg dpu_sm8350_cfg = {
.dsc = sm8350_dsc,
.merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
.merge_3d = sm8350_merge_3d,
+ .wb_count = ARRAY_SIZE(sm8350_wb),
+ .wb = sm8350_wb,
.intf_count = ARRAY_SIZE(sm8350_intf),
.intf = sm8350_intf,
.vbif_count = ARRAY_SIZE(sdm845_vbif),
--
2.43.0
From: Douglas Anderson <[email protected]>
[ Upstream commit 16ac5b21b31b439f03cdf44c153c5f5af94fb3eb ]
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <[email protected]>
Reviewed-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Reviewed-by: Marek Szyprowski <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/exynos/exynos_drm_drv.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 8399256cb5c9..5380fb6c55ae 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -300,6 +300,7 @@ static int exynos_drm_bind(struct device *dev)
drm_mode_config_cleanup(drm);
exynos_drm_cleanup_dma(drm);
kfree(private);
+ dev_set_drvdata(dev, NULL);
err_free_drm:
drm_dev_put(drm);
@@ -313,6 +314,7 @@ static void exynos_drm_unbind(struct device *dev)
drm_dev_unregister(drm);
drm_kms_helper_poll_fini(drm);
+ drm_atomic_helper_shutdown(drm);
component_unbind_all(drm->dev, drm);
drm_mode_config_cleanup(drm);
@@ -350,9 +352,18 @@ static int exynos_drm_platform_remove(struct platform_device *pdev)
return 0;
}
+static void exynos_drm_platform_shutdown(struct platform_device *pdev)
+{
+ struct drm_device *drm = platform_get_drvdata(pdev);
+
+ if (drm)
+ drm_atomic_helper_shutdown(drm);
+}
+
static struct platform_driver exynos_drm_platform_driver = {
.probe = exynos_drm_platform_probe,
.remove = exynos_drm_platform_remove,
+ .shutdown = exynos_drm_platform_shutdown,
.driver = {
.name = "exynos-drm",
.pm = &exynos_drm_pm_ops,
--
2.43.0
From: Felix Kuehling <[email protected]>
[ Upstream commit ec9ba4821fa52b5efdbc4cdf0a77497990655231 ]
Change the rules for amdgpu_sync_resv to let KFD synchronize with VM
fences on page table reservations. This fixes intermittent memory
corruption after evictions when using amdgpu_vm_handle_moved to update
page tables for VM mappings managed through render nodes.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
index dcd8c066bc1f..1b013a44ca99 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
@@ -191,7 +191,8 @@ static bool amdgpu_sync_test_fence(struct amdgpu_device *adev,
/* Never sync to VM updates either. */
if (fence_owner == AMDGPU_FENCE_OWNER_VM &&
- owner != AMDGPU_FENCE_OWNER_UNDEFINED)
+ owner != AMDGPU_FENCE_OWNER_UNDEFINED &&
+ owner != AMDGPU_FENCE_OWNER_KFD)
return false;
/* Ignore fences depending on the sync mode */
--
2.43.0
From: Jonathan Kim <[email protected]>
[ Upstream commit bd33bb1409b494558a2935f7bbc7842def957fcd ]
MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.
When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.
Normally, MES will purge its process context list when the last queue
has been removed. The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.
If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.
On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation. Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.
The solution is for KFD to explicitly flush the process context address
from MES on process termination.
Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.
Signed-off-by: Jonathan Kim <[email protected]>
Tested-by: Alice Wong <[email protected]>
Reviewed-by: Eric Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 31 +++++++++++++++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h | 10 +++---
.../amd/amdkfd/kfd_process_queue_manager.c | 1 +
drivers/gpu/drm/amd/include/mes_v11_api_def.h | 3 +-
4 files changed, 40 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
index 9ddbf1494326..30c010836658 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c
@@ -886,6 +886,11 @@ int amdgpu_mes_set_shader_debugger(struct amdgpu_device *adev,
op_input.op = MES_MISC_OP_SET_SHADER_DEBUGGER;
op_input.set_shader_debugger.process_context_addr = process_context_addr;
op_input.set_shader_debugger.flags.u32all = flags;
+
+ /* use amdgpu mes_flush_shader_debugger instead */
+ if (op_input.set_shader_debugger.flags.process_ctx_flush)
+ return -EINVAL;
+
op_input.set_shader_debugger.spi_gdbg_per_vmid_cntl = spi_gdbg_per_vmid_cntl;
memcpy(op_input.set_shader_debugger.tcp_watch_cntl, tcp_watch_cntl,
sizeof(op_input.set_shader_debugger.tcp_watch_cntl));
@@ -905,6 +910,32 @@ int amdgpu_mes_set_shader_debugger(struct amdgpu_device *adev,
return r;
}
+int amdgpu_mes_flush_shader_debugger(struct amdgpu_device *adev,
+ uint64_t process_context_addr)
+{
+ struct mes_misc_op_input op_input = {0};
+ int r;
+
+ if (!adev->mes.funcs->misc_op) {
+ DRM_ERROR("mes flush shader debugger is not supported!\n");
+ return -EINVAL;
+ }
+
+ op_input.op = MES_MISC_OP_SET_SHADER_DEBUGGER;
+ op_input.set_shader_debugger.process_context_addr = process_context_addr;
+ op_input.set_shader_debugger.flags.process_ctx_flush = true;
+
+ amdgpu_mes_lock(&adev->mes);
+
+ r = adev->mes.funcs->misc_op(&adev->mes, &op_input);
+ if (r)
+ DRM_ERROR("failed to set_shader_debugger\n");
+
+ amdgpu_mes_unlock(&adev->mes);
+
+ return r;
+}
+
static void
amdgpu_mes_ring_to_queue_props(struct amdgpu_device *adev,
struct amdgpu_ring *ring,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h
index a27b424ffe00..c2c88b772361 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h
@@ -291,9 +291,10 @@ struct mes_misc_op_input {
uint64_t process_context_addr;
union {
struct {
- uint64_t single_memop : 1;
- uint64_t single_alu_op : 1;
- uint64_t reserved: 30;
+ uint32_t single_memop : 1;
+ uint32_t single_alu_op : 1;
+ uint32_t reserved: 29;
+ uint32_t process_ctx_flush: 1;
};
uint32_t u32all;
} flags;
@@ -369,7 +370,8 @@ int amdgpu_mes_set_shader_debugger(struct amdgpu_device *adev,
const uint32_t *tcp_watch_cntl,
uint32_t flags,
bool trap_en);
-
+int amdgpu_mes_flush_shader_debugger(struct amdgpu_device *adev,
+ uint64_t process_context_addr);
int amdgpu_mes_add_ring(struct amdgpu_device *adev, int gang_id,
int queue_type, int idx,
struct amdgpu_mes_ctx_data *ctx_data,
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
index 77f493262e05..8e55e78fce4e 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
@@ -87,6 +87,7 @@ void kfd_process_dequeue_from_device(struct kfd_process_device *pdd)
return;
dev->dqm->ops.process_termination(dev->dqm, &pdd->qpd);
+ amdgpu_mes_flush_shader_debugger(dev->adev, pdd->proc_ctx_gpu_addr);
pdd->already_dequeued = true;
}
diff --git a/drivers/gpu/drm/amd/include/mes_v11_api_def.h b/drivers/gpu/drm/amd/include/mes_v11_api_def.h
index b1db2b190187..e07e93167a82 100644
--- a/drivers/gpu/drm/amd/include/mes_v11_api_def.h
+++ b/drivers/gpu/drm/amd/include/mes_v11_api_def.h
@@ -571,7 +571,8 @@ struct SET_SHADER_DEBUGGER {
struct {
uint32_t single_memop : 1; /* SQ_DEBUG.single_memop */
uint32_t single_alu_op : 1; /* SQ_DEBUG.single_alu_op */
- uint32_t reserved : 30;
+ uint32_t reserved : 29;
+ uint32_t process_ctx_flush : 1;
};
uint32_t u32all;
} flags;
--
2.43.0
From: James Seo <[email protected]>
[ Upstream commit c9ba592580947b81f33f514320aeef02ddc001fd ]
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its
BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is
evidently a valid way of representing a WMI data item as far as the
Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from
loading.
This seems quite rare, but add support for such strings. Treating this as a
quirk pretty much means adding that support anyway.
Also clean up an oversight in update_numeric_sensor_from_wobj() in which
the result of hp_wmi_strdup() was being used without error checking.
Reported-by: Lukasz Stelmach <[email protected]>
Closes: https://lore.kernel.org/linux-hwmon/[email protected]/
Tested-by: Lukasz Stelmach <[email protected]>
Signed-off-by: James Seo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/hp-wmi-sensors.c | 127 ++++++++++++++++++++++++++++-----
1 file changed, 111 insertions(+), 16 deletions(-)
diff --git a/drivers/hwmon/hp-wmi-sensors.c b/drivers/hwmon/hp-wmi-sensors.c
index 17ae62f88bbf..b5325d0e72b9 100644
--- a/drivers/hwmon/hp-wmi-sensors.c
+++ b/drivers/hwmon/hp-wmi-sensors.c
@@ -17,6 +17,8 @@
* Available: https://github.com/linuxhw/ACPI
* [4] P. Rohár, "bmfdec - Decompile binary MOF file (BMF) from WMI buffer",
* 2017. [Online]. Available: https://github.com/pali/bmfdec
+ * [5] Microsoft Corporation, "Driver-Defined WMI Data Items", 2017. [Online].
+ * Available: https://learn.microsoft.com/en-us/windows-hardware/drivers/kernel/driver-defined-wmi-data-items
*/
#include <linux/acpi.h>
@@ -24,6 +26,7 @@
#include <linux/hwmon.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
+#include <linux/nls.h>
#include <linux/units.h>
#include <linux/wmi.h>
@@ -395,6 +398,50 @@ struct hp_wmi_sensors {
struct mutex lock; /* Lock polling WMI and driver state changes. */
};
+static bool is_raw_wmi_string(const u8 *pointer, u32 length)
+{
+ const u16 *ptr;
+ u16 len;
+
+ /* WMI strings are length-prefixed UTF-16 [5]. */
+ if (length <= sizeof(*ptr))
+ return false;
+
+ length -= sizeof(*ptr);
+ ptr = (const u16 *)pointer;
+ len = *ptr;
+
+ return len <= length && !(len & 1);
+}
+
+static char *convert_raw_wmi_string(const u8 *buf)
+{
+ const wchar_t *src;
+ unsigned int cps;
+ unsigned int len;
+ char *dst;
+ int i;
+
+ src = (const wchar_t *)buf;
+
+ /* Count UTF-16 code points. Exclude trailing null padding. */
+ cps = *src / sizeof(*src);
+ while (cps && !src[cps])
+ cps--;
+
+ /* Each code point becomes up to 3 UTF-8 characters. */
+ len = min(cps * 3, HP_WMI_MAX_STR_SIZE - 1);
+
+ dst = kmalloc((len + 1) * sizeof(*dst), GFP_KERNEL);
+ if (!dst)
+ return NULL;
+
+ i = utf16s_to_utf8s(++src, cps, UTF16_LITTLE_ENDIAN, dst, len);
+ dst[i] = '\0';
+
+ return dst;
+}
+
/* hp_wmi_strdup - devm_kstrdup, but length-limited */
static char *hp_wmi_strdup(struct device *dev, const char *src)
{
@@ -412,6 +459,23 @@ static char *hp_wmi_strdup(struct device *dev, const char *src)
return dst;
}
+/* hp_wmi_wstrdup - hp_wmi_strdup, but for a raw WMI string */
+static char *hp_wmi_wstrdup(struct device *dev, const u8 *buf)
+{
+ char *src;
+ char *dst;
+
+ src = convert_raw_wmi_string(buf);
+ if (!src)
+ return NULL;
+
+ dst = hp_wmi_strdup(dev, strim(src)); /* Note: Copy is trimmed. */
+
+ kfree(src);
+
+ return dst;
+}
+
/*
* hp_wmi_get_wobj - poll WMI for a WMI object instance
* @guid: WMI object GUID
@@ -462,8 +526,14 @@ static int check_wobj(const union acpi_object *wobj,
for (prop = 0; prop <= last_prop; prop++) {
type = elements[prop].type;
valid_type = property_map[prop];
- if (type != valid_type)
+ if (type != valid_type) {
+ if (type == ACPI_TYPE_BUFFER &&
+ valid_type == ACPI_TYPE_STRING &&
+ is_raw_wmi_string(elements[prop].buffer.pointer,
+ elements[prop].buffer.length))
+ continue;
return -EINVAL;
+ }
}
return 0;
@@ -480,7 +550,9 @@ static int extract_acpi_value(struct device *dev,
break;
case ACPI_TYPE_STRING:
- *out_string = hp_wmi_strdup(dev, strim(element->string.pointer));
+ *out_string = element->type == ACPI_TYPE_BUFFER ?
+ hp_wmi_wstrdup(dev, element->buffer.pointer) :
+ hp_wmi_strdup(dev, strim(element->string.pointer));
if (!*out_string)
return -ENOMEM;
break;
@@ -861,7 +933,9 @@ update_numeric_sensor_from_wobj(struct device *dev,
{
const union acpi_object *elements;
const union acpi_object *element;
- const char *string;
+ const char *new_string;
+ char *trimmed;
+ char *string;
bool is_new;
int offset;
u8 size;
@@ -885,11 +959,21 @@ update_numeric_sensor_from_wobj(struct device *dev,
offset = is_new ? size - 1 : -2;
element = &elements[HP_WMI_PROPERTY_CURRENT_STATE + offset];
- string = strim(element->string.pointer);
-
- if (strcmp(string, nsensor->current_state)) {
- devm_kfree(dev, nsensor->current_state);
- nsensor->current_state = hp_wmi_strdup(dev, string);
+ string = element->type == ACPI_TYPE_BUFFER ?
+ convert_raw_wmi_string(element->buffer.pointer) :
+ element->string.pointer;
+
+ if (string) {
+ trimmed = strim(string);
+ if (strcmp(trimmed, nsensor->current_state)) {
+ new_string = hp_wmi_strdup(dev, trimmed);
+ if (new_string) {
+ devm_kfree(dev, nsensor->current_state);
+ nsensor->current_state = new_string;
+ }
+ }
+ if (element->type == ACPI_TYPE_BUFFER)
+ kfree(string);
}
/* Old variant: -2 (not -1) because it lacks the Size property. */
@@ -996,11 +1080,15 @@ static int check_event_wobj(const union acpi_object *wobj)
HP_WMI_EVENT_PROPERTY_STATUS);
}
-static int populate_event_from_wobj(struct hp_wmi_event *event,
+static int populate_event_from_wobj(struct device *dev,
+ struct hp_wmi_event *event,
union acpi_object *wobj)
{
int prop = HP_WMI_EVENT_PROPERTY_NAME;
union acpi_object *element;
+ acpi_object_type type;
+ char *string;
+ u32 value;
int err;
err = check_event_wobj(wobj);
@@ -1009,20 +1097,24 @@ static int populate_event_from_wobj(struct hp_wmi_event *event,
element = wobj->package.elements;
- /* Extracted strings are NOT device-managed copies. */
-
for (; prop <= HP_WMI_EVENT_PROPERTY_CATEGORY; prop++, element++) {
+ type = hp_wmi_event_property_map[prop];
+
+ err = extract_acpi_value(dev, element, type, &value, &string);
+ if (err)
+ return err;
+
switch (prop) {
case HP_WMI_EVENT_PROPERTY_NAME:
- event->name = strim(element->string.pointer);
+ event->name = string;
break;
case HP_WMI_EVENT_PROPERTY_DESCRIPTION:
- event->description = strim(element->string.pointer);
+ event->description = string;
break;
case HP_WMI_EVENT_PROPERTY_CATEGORY:
- event->category = element->integer.value;
+ event->category = value;
break;
default:
@@ -1511,8 +1603,8 @@ static void hp_wmi_notify(u32 value, void *context)
struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL };
struct hp_wmi_sensors *state = context;
struct device *dev = &state->wdev->dev;
+ struct hp_wmi_event event = {};
struct hp_wmi_info *fan_info;
- struct hp_wmi_event event;
union acpi_object *wobj;
acpi_status err;
int event_type;
@@ -1546,7 +1638,7 @@ static void hp_wmi_notify(u32 value, void *context)
wobj = out.pointer;
- err = populate_event_from_wobj(&event, wobj);
+ err = populate_event_from_wobj(dev, &event, wobj);
if (err) {
dev_warn(dev, "Bad event data (ACPI type %d)\n", wobj->type);
goto out_free_wobj;
@@ -1577,6 +1669,9 @@ static void hp_wmi_notify(u32 value, void *context)
out_free_wobj:
kfree(wobj);
+ devm_kfree(dev, event.name);
+ devm_kfree(dev, event.description);
+
out_unlock:
mutex_unlock(&state->lock);
}
--
2.43.0
From: Cristian Ciocaltea <[email protected]>
[ Upstream commit 67c7666fe808c3a7af3cc6f9d0a3dd3acfd26115 ]
The virtual widget example makes use of an undefined SND_SOC_DAPM_NOPM
argument passed to SND_SOC_DAPM_MIXER(). Replace with the correct
SND_SOC_NOPM definition.
Signed-off-by: Cristian Ciocaltea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/sound/soc/dapm.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/sound/soc/dapm.rst b/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- a/Documentation/sound/soc/dapm.rst
+++ b/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
a virtual widget - a widget with no control bits e.g.
::
- SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
This can be used to merge to signal paths together in software.
--
2.43.0
From: Srinivasan Shanmugam <[email protected]>
[ Upstream commit b1a428b45dc7e47c7acc2ad0d08d8a6dda910c4c ]
Fix the following about iterator use:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1456 kfd_add_peer_prop() warn: iterator used outside loop: 'iolink3'
Cc: Felix Kuehling <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 24 ++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
index 057284bf50bb..d18dff7bb889 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -1449,17 +1449,19 @@ static int kfd_add_peer_prop(struct kfd_topology_device *kdev,
/* CPU->CPU link*/
cpu_dev = kfd_topology_device_by_proximity_domain(iolink1->node_to);
if (cpu_dev) {
- list_for_each_entry(iolink3, &cpu_dev->io_link_props, list)
- if (iolink3->node_to == iolink2->node_to)
- break;
-
- props->weight += iolink3->weight;
- props->min_latency += iolink3->min_latency;
- props->max_latency += iolink3->max_latency;
- props->min_bandwidth = min(props->min_bandwidth,
- iolink3->min_bandwidth);
- props->max_bandwidth = min(props->max_bandwidth,
- iolink3->max_bandwidth);
+ list_for_each_entry(iolink3, &cpu_dev->io_link_props, list) {
+ if (iolink3->node_to != iolink2->node_to)
+ continue;
+
+ props->weight += iolink3->weight;
+ props->min_latency += iolink3->min_latency;
+ props->max_latency += iolink3->max_latency;
+ props->min_bandwidth = min(props->min_bandwidth,
+ iolink3->min_bandwidth);
+ props->max_bandwidth = min(props->max_bandwidth,
+ iolink3->max_bandwidth);
+ break;
+ }
} else {
WARN(1, "CPU node not found");
}
--
2.43.0
From: Srinivasan Shanmugam <[email protected]>
[ Upstream commit b8d55a90fd55b767c25687747e2b24abd1ef8680 ]
Return invalid error code -EINVAL for invalid block id.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176)
Suggested-by: Hawking Zhang <[email protected]>
Cc: Tao Zhou <[email protected]>
Cc: Hawking Zhang <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 63fb4cd85e53..4a3726bb6da1 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -1174,6 +1174,9 @@ static int amdgpu_ras_query_error_status_helper(struct amdgpu_device *adev,
enum amdgpu_ras_block blk = info ? info->head.block : AMDGPU_RAS_BLOCK_COUNT;
struct amdgpu_ras_block_object *block_obj = NULL;
+ if (blk == AMDGPU_RAS_BLOCK_COUNT)
+ return -EINVAL;
+
if (error_query_mode == AMDGPU_RAS_INVALID_ERROR_QUERY)
return -EINVAL;
--
2.43.0
From: Kaibo Ma <[email protected]>
[ Upstream commit 0f35b0a7b8fa402adbffa2565047cdcc4c480153 ]
That commit causes NULL pointer dereferences in dmesgs when
running applications using ROCm, including clinfo, blender,
and PyTorch, since v6.6.1. Revert it to fix blender again.
This reverts commit 96c211f1f9ef82183493f4ceed4e347b52849149.
Closes: https://github.com/ROCm/ROCm/issues/2596
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2991
Reviewed-by: Jay Cornwall <[email protected]>
Signed-off-by: Kaibo Ma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdkfd/kfd_flat_memory.c | 26 ++++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_flat_memory.c b/drivers/gpu/drm/amd/amdkfd/kfd_flat_memory.c
index 62b205dac63a..6604a3f99c5e 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_flat_memory.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_flat_memory.c
@@ -330,12 +330,6 @@ static void kfd_init_apertures_vi(struct kfd_process_device *pdd, uint8_t id)
pdd->gpuvm_limit =
pdd->dev->kfd->shared_resources.gpuvm_size - 1;
- /* dGPUs: the reserved space for kernel
- * before SVM
- */
- pdd->qpd.cwsr_base = SVM_CWSR_BASE;
- pdd->qpd.ib_base = SVM_IB_BASE;
-
pdd->scratch_base = MAKE_SCRATCH_APP_BASE_VI();
pdd->scratch_limit = MAKE_SCRATCH_APP_LIMIT(pdd->scratch_base);
}
@@ -345,18 +339,18 @@ static void kfd_init_apertures_v9(struct kfd_process_device *pdd, uint8_t id)
pdd->lds_base = MAKE_LDS_APP_BASE_V9();
pdd->lds_limit = MAKE_LDS_APP_LIMIT(pdd->lds_base);
- pdd->gpuvm_base = PAGE_SIZE;
+ /* Raven needs SVM to support graphic handle, etc. Leave the small
+ * reserved space before SVM on Raven as well, even though we don't
+ * have to.
+ * Set gpuvm_base and gpuvm_limit to CANONICAL addresses so that they
+ * are used in Thunk to reserve SVM.
+ */
+ pdd->gpuvm_base = SVM_USER_BASE;
pdd->gpuvm_limit =
pdd->dev->kfd->shared_resources.gpuvm_size - 1;
pdd->scratch_base = MAKE_SCRATCH_APP_BASE_V9();
pdd->scratch_limit = MAKE_SCRATCH_APP_LIMIT(pdd->scratch_base);
-
- /*
- * Place TBA/TMA on opposite side of VM hole to prevent
- * stray faults from triggering SVM on these pages.
- */
- pdd->qpd.cwsr_base = pdd->dev->kfd->shared_resources.gpuvm_size;
}
int kfd_init_apertures(struct kfd_process *process)
@@ -413,6 +407,12 @@ int kfd_init_apertures(struct kfd_process *process)
return -EINVAL;
}
}
+
+ /* dGPUs: the reserved space for kernel
+ * before SVM
+ */
+ pdd->qpd.cwsr_base = SVM_CWSR_BASE;
+ pdd->qpd.ib_base = SVM_IB_BASE;
}
dev_dbg(kfd_device, "node id %u\n", id);
--
2.43.0
From: Srinivasan Shanmugam <[email protected]>
[ Upstream commit 13a1851f923d9a7a78a477497295c2dfd16ad4a4 ]
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:1404 amdgpu_ucode_request() warn: '*fw' from request_firmware() not released on lines: 1404.
Cc: Mario Limonciello <[email protected]>
Cc: Lijo Lazar <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index b14127429f30..0efb2568cb65 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -1397,9 +1397,13 @@ int amdgpu_ucode_request(struct amdgpu_device *adev, const struct firmware **fw,
if (err)
return -ENODEV;
+
err = amdgpu_ucode_validate(*fw);
- if (err)
+ if (err) {
dev_dbg(adev->dev, "\"%s\" failed to validate\n", fw_name);
+ release_firmware(*fw);
+ *fw = NULL;
+ }
return err;
}
--
2.43.0
From: Kuan-Wei Chiu <[email protected]>
[ Upstream commit bfbea9e5667cfa9552c3d88f023386f017f6c308 ]
In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/hisilicon/clk-hi3620.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/hisilicon/clk-hi3620.c b/drivers/clk/hisilicon/clk-hi3620.c
index 2d7186905abd..5d0226530fdb 100644
--- a/drivers/clk/hisilicon/clk-hi3620.c
+++ b/drivers/clk/hisilicon/clk-hi3620.c
@@ -466,8 +466,10 @@ static void __init hi3620_mmc_clk_init(struct device_node *node)
return;
clk_data->clks = kcalloc(num, sizeof(*clk_data->clks), GFP_KERNEL);
- if (!clk_data->clks)
+ if (!clk_data->clks) {
+ kfree(clk_data);
return;
+ }
for (i = 0; i < num; i++) {
struct hisi_mmc_clock *mmc_clk = &hi3620_mmc_clks[i];
--
2.43.0
From: Alex Deucher <[email protected]>
[ Upstream commit 16783d8ef08448815e149e40c82fc1e1fc41ddbf ]
These chips needs the same fix. This was previously not seen
on then since the AGP aperture expanded the system aperture,
but this showed up again when AGP was disabled.
Reviewed-and-tested-by: Jiadong Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c | 4 +++-
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c | 4 +++-
drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c | 4 +++-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++++--
4 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
index 53a2ba5fcf4b..22175da0e16a 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
@@ -102,7 +102,9 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
WREG32_SOC15_RLC(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR,
min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
- if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+ if (adev->apu_flags & (AMD_APU_IS_RAVEN2 |
+ AMD_APU_IS_RENOIR |
+ AMD_APU_IS_GREEN_SARDINE))
/*
* Raven2 has a HW issue that it is unable to use the
* vram which is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR.
diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c
index 55423ff1bb49..95d06da544e2 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c
@@ -139,7 +139,9 @@ gfxhub_v1_2_xcc_init_system_aperture_regs(struct amdgpu_device *adev,
WREG32_SOC15_RLC(GC, GET_INST(GC, i), regMC_VM_SYSTEM_APERTURE_LOW_ADDR,
min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
- if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+ if (adev->apu_flags & (AMD_APU_IS_RAVEN2 |
+ AMD_APU_IS_RENOIR |
+ AMD_APU_IS_GREEN_SARDINE))
/*
* Raven2 has a HW issue that it is unable to use the
* vram which is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR.
diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
index 843219a91736..e3ddd22aa172 100644
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c
@@ -96,7 +96,9 @@ static void mmhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR,
min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
- if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+ if (adev->apu_flags & (AMD_APU_IS_RAVEN2 |
+ AMD_APU_IS_RENOIR |
+ AMD_APU_IS_GREEN_SARDINE))
/*
* Raven2 has a HW issue that it is unable to use the vram which
* is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index cf32502d669f..2ec5705596bf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1257,7 +1257,9 @@ static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_
/* AGP aperture is disabled */
if (agp_bot > agp_top) {
logical_addr_low = adev->gmc.fb_start >> 18;
- if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+ if (adev->apu_flags & (AMD_APU_IS_RAVEN2 |
+ AMD_APU_IS_RENOIR |
+ AMD_APU_IS_GREEN_SARDINE))
/*
* Raven2 has a HW issue that it is unable to use the vram which
* is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
@@ -1269,7 +1271,9 @@ static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_
logical_addr_high = adev->gmc.fb_end >> 18;
} else {
logical_addr_low = min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18;
- if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+ if (adev->apu_flags & (AMD_APU_IS_RAVEN2 |
+ AMD_APU_IS_RENOIR |
+ AMD_APU_IS_GREEN_SARDINE))
/*
* Raven2 has a HW issue that it is unable to use the vram which
* is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
--
2.43.0
From: Namjae Jeon <[email protected]>
[ Upstream commit 6fc0a265e1b932e5e97a038f99e29400a93baad0 ]
smb2_set_ea() can be called in parent inode lock range.
So add get_write argument to smb2_set_ea() not to call nested
mnt_want_write().
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/smb/server/smb2pdu.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index 652ab429bf2e..a2f729675183 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -2311,11 +2311,12 @@ static noinline int create_smb2_pipe(struct ksmbd_work *work)
* @eabuf: set info command buffer
* @buf_len: set info command buffer length
* @path: dentry path for get ea
+ * @get_write: get write access to a mount
*
* Return: 0 on success, otherwise error
*/
static int smb2_set_ea(struct smb2_ea_info *eabuf, unsigned int buf_len,
- const struct path *path)
+ const struct path *path, bool get_write)
{
struct mnt_idmap *idmap = mnt_idmap(path->mnt);
char *attr_name = NULL, *value;
@@ -3003,7 +3004,7 @@ int smb2_open(struct ksmbd_work *work)
rc = smb2_set_ea(&ea_buf->ea,
le32_to_cpu(ea_buf->ccontext.DataLength),
- &path);
+ &path, false);
if (rc == -EOPNOTSUPP)
rc = 0;
else if (rc)
@@ -5992,7 +5993,7 @@ static int smb2_set_info_file(struct ksmbd_work *work, struct ksmbd_file *fp,
return -EINVAL;
return smb2_set_ea((struct smb2_ea_info *)req->Buffer,
- buf_len, &fp->filp->f_path);
+ buf_len, &fp->filp->f_path, true);
}
case FILE_POSITION_INFORMATION:
{
--
2.43.0
From: Namjae Jeon <[email protected]>
[ Upstream commit 3fc74c65b367476874da5fe6f633398674b78e5a ]
Send lease break notification on FILE_RENAME_INFORMATION request.
This patch fix smb2.lease.v2_epoch2 test failure.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/smb/server/oplock.c | 9 +++++++--
fs/smb/server/smb2pdu.c | 1 +
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c
index 9a19d8b06c8c..6bf2b675add9 100644
--- a/fs/smb/server/oplock.c
+++ b/fs/smb/server/oplock.c
@@ -546,6 +546,7 @@ static struct oplock_info *same_client_has_lease(struct ksmbd_inode *ci,
atomic_read(&ci->sop_count)) == 1) {
if (lease->state != SMB2_LEASE_NONE_LE &&
lease->state == (lctx->req_state & lease->state)) {
+ lease->epoch++;
lease->state |= lctx->req_state;
if (lctx->req_state &
SMB2_LEASE_WRITE_CACHING_LE)
@@ -556,13 +557,17 @@ static struct oplock_info *same_client_has_lease(struct ksmbd_inode *ci,
atomic_read(&ci->sop_count)) > 1) {
if (lctx->req_state ==
(SMB2_LEASE_READ_CACHING_LE |
- SMB2_LEASE_HANDLE_CACHING_LE))
+ SMB2_LEASE_HANDLE_CACHING_LE)) {
+ lease->epoch++;
lease->state = lctx->req_state;
+ }
}
if (lctx->req_state && lease->state ==
- SMB2_LEASE_NONE_LE)
+ SMB2_LEASE_NONE_LE) {
+ lease->epoch++;
lease_none_upgrade(opinfo, lctx->req_state);
+ }
}
read_lock(&ci->m_lock);
}
diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index a2f729675183..5a31d47875da 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -5569,6 +5569,7 @@ static int smb2_rename(struct ksmbd_work *work,
if (!file_info->ReplaceIfExists)
flags = RENAME_NOREPLACE;
+ smb_break_all_levII_oplock(work, fp, 0);
rc = ksmbd_vfs_rename(work, &fp->filp->f_path, new_name, flags);
out:
kfree(new_name);
--
2.43.0
From: Dafna Hirschfeld <[email protected]>
[ Upstream commit 0ec346779644039c4c05cfa7f071b1a24e54d8d9 ]
currently the undefined opcode event bit in set only for lower cp and
only if 'write_enable' is true. It should be set anyway and for all
streams in order to report that event to userspace.
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/accel/habanalabs/gaudi2/gaudi2.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/accel/habanalabs/gaudi2/gaudi2.c b/drivers/accel/habanalabs/gaudi2/gaudi2.c
index 819660c684cf..bc6e338ef2fd 100644
--- a/drivers/accel/habanalabs/gaudi2/gaudi2.c
+++ b/drivers/accel/habanalabs/gaudi2/gaudi2.c
@@ -7929,21 +7929,19 @@ static int gaudi2_handle_qman_err_generic(struct hl_device *hdev, u16 event_type
error_count++;
}
- if (i == QMAN_STREAMS && error_count) {
- /* check for undefined opcode */
- if (glbl_sts_val & PDMA0_QM_GLBL_ERR_STS_CP_UNDEF_CMD_ERR_MASK &&
- hdev->captured_err_info.undef_opcode.write_enable) {
+ /* check for undefined opcode */
+ if (glbl_sts_val & PDMA0_QM_GLBL_ERR_STS_CP_UNDEF_CMD_ERR_MASK) {
+ *event_mask |= HL_NOTIFIER_EVENT_UNDEFINED_OPCODE;
+ if (hdev->captured_err_info.undef_opcode.write_enable) {
memset(&hdev->captured_err_info.undef_opcode, 0,
sizeof(hdev->captured_err_info.undef_opcode));
-
- hdev->captured_err_info.undef_opcode.write_enable = false;
hdev->captured_err_info.undef_opcode.timestamp = ktime_get();
hdev->captured_err_info.undef_opcode.engine_id =
gaudi2_queue_id_to_engine_id[qid_base];
- *event_mask |= HL_NOTIFIER_EVENT_UNDEFINED_OPCODE;
}
- handle_lower_qman_data_on_err(hdev, qman_base, *event_mask);
+ if (i == QMAN_STREAMS)
+ handle_lower_qman_data_on_err(hdev, qman_base, *event_mask);
}
}
--
2.43.0
From: Jaegeuk Kim <[email protected]>
[ Upstream commit 9dad4d964291295ef48243d4e03972b85138bc9f ]
1. do roll forward recovery
2. update current segments pointers
3. fix the entire zones' write pointers
4. do checkpoint
Reviewed-by: Daeho Jeong <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/recovery.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 16415c770b45..d0f24ccbd1ac 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -917,6 +917,8 @@ int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
if (!err && fix_curseg_write_pointer && !f2fs_readonly(sbi->sb) &&
f2fs_sb_has_blkzoned(sbi)) {
err = f2fs_fix_curseg_write_pointer(sbi);
+ if (!err)
+ err = f2fs_check_write_pointer(sbi);
ret = err;
}
--
2.43.0
From: Michael Strauss <[email protected]>
[ Upstream commit 5a82b8d6c05f9b30828ede1b103b9ee5cb5c912e ]
[WHY]
Previous fix for multiple displays downstream of DP2 MST hub caused regression
[HOW]
Match sink IDs instead of sink struct addresses
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Michael Strauss <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c
index 2498b8341199..d6a68484153c 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c
@@ -157,6 +157,14 @@ bool is_dp2p0_output_encoder(const struct pipe_ctx *pipe_ctx)
{
/* If this assert is hit then we have a link encoder dynamic management issue */
ASSERT(pipe_ctx->stream_res.hpo_dp_stream_enc ? pipe_ctx->link_res.hpo_dp_link_enc != NULL : true);
+ /* Count MST hubs once by treating only 1st remote sink in topology as an encoder */
+ if (pipe_ctx->stream->link && pipe_ctx->stream->link->remote_sinks[0]) {
+ return (pipe_ctx->stream_res.hpo_dp_stream_enc &&
+ pipe_ctx->link_res.hpo_dp_link_enc &&
+ dc_is_dp_signal(pipe_ctx->stream->signal) &&
+ (pipe_ctx->stream->link->remote_sinks[0]->sink_id == pipe_ctx->stream->sink->sink_id));
+ }
+
return (pipe_ctx->stream_res.hpo_dp_stream_enc &&
pipe_ctx->link_res.hpo_dp_link_enc &&
dc_is_dp_signal(pipe_ctx->stream->signal));
--
2.43.0
From: Hsin-Yi Wang <[email protected]>
[ Upstream commit 9f7843b515811aea6c56527eb195b622e9c01f12 ]
Generic edp gets mode from edid. However, some panels report incorrect
mode in this way, resulting in glitches on panel. Introduce a new quirk
additional_mode to the generic edid to pick a correct hardcoded mode.
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-edp.c | 48 +++++++++++++++++++++++++++++--
1 file changed, 45 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 95c8472d878a..87a69293f594 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -203,6 +203,9 @@ struct edp_panel_entry {
/** @name: Name of this panel (for printing to logs). */
const char *name;
+
+ /** @override_edid_mode: Override the mode obtained by edid. */
+ const struct drm_display_mode *override_edid_mode;
};
struct panel_edp {
@@ -301,6 +304,24 @@ static unsigned int panel_edp_get_display_modes(struct panel_edp *panel,
return num;
}
+static int panel_edp_override_edid_mode(struct panel_edp *panel,
+ struct drm_connector *connector,
+ const struct drm_display_mode *override_mode)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, override_mode);
+ if (!mode) {
+ dev_err(panel->base.dev, "failed to add additional mode\n");
+ return 0;
+ }
+
+ mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ return 1;
+}
+
static int panel_edp_get_non_edid_modes(struct panel_edp *panel,
struct drm_connector *connector)
{
@@ -568,6 +589,9 @@ static int panel_edp_get_modes(struct drm_panel *panel,
{
struct panel_edp *p = to_panel_edp(panel);
int num = 0;
+ bool has_override_edid_mode = p->detected_panel &&
+ p->detected_panel != ERR_PTR(-EINVAL) &&
+ p->detected_panel->override_edid_mode;
/* probe EDID if a DDC bus is available */
if (p->ddc) {
@@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel,
if (!p->edid)
p->edid = drm_get_edid(connector, p->ddc);
-
- if (p->edid)
- num += drm_add_edid_modes(connector, p->edid);
+ if (p->edid) {
+ if (has_override_edid_mode) {
+ /*
+ * override_edid_mode is specified. Use
+ * override_edid_mode instead of from edid.
+ */
+ num += panel_edp_override_edid_mode(p, connector,
+ p->detected_panel->override_edid_mode);
+ } else {
+ num += drm_add_edid_modes(connector, p->edid);
+ }
+ }
pm_runtime_mark_last_busy(panel->dev);
pm_runtime_put_autosuspend(panel->dev);
@@ -1828,6 +1861,15 @@ static const struct panel_delay delay_200_500_e200 = {
.delay = _delay \
}
+#define EDP_PANEL_ENTRY2(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name, _mode) \
+{ \
+ .name = _name, \
+ .panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
+ product_id), \
+ .delay = _delay, \
+ .override_edid_mode = _mode \
+}
+
/*
* This table is used to figure out power sequencing delays for panels that
* are detected by EDID. Entries here may point to entries in the
--
2.43.0
From: Alexander Stein <[email protected]>
[ Upstream commit 3f5f63adeea7e7aa715e101ffe4b4ac9705f9664 ]
To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.
Signed-off-by: Oliver F. Brown <[email protected]>
Signed-off-by: Ranjani Vaidyanathan <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx8qxp.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
index 41f0a45aa162..7d8883916cac 100644
--- a/drivers/clk/imx/clk-imx8qxp.c
+++ b/drivers/clk/imx/clk-imx8qxp.c
@@ -66,6 +66,22 @@ static const char * const lcd_pxl_sels[] = {
"lcd_pxl_bypass_div_clk",
};
+static const char *const lvds0_sels[] = {
+ "clk_dummy",
+ "clk_dummy",
+ "clk_dummy",
+ "clk_dummy",
+ "mipi0_lvds_bypass_clk",
+};
+
+static const char *const lvds1_sels[] = {
+ "clk_dummy",
+ "clk_dummy",
+ "clk_dummy",
+ "clk_dummy",
+ "mipi1_lvds_bypass_clk",
+};
+
static const char * const mipi_sels[] = {
"clk_dummy",
"clk_dummy",
@@ -207,9 +223,9 @@ static int imx8qxp_clk_probe(struct platform_device *pdev)
/* MIPI-LVDS SS */
imx_clk_scu("mipi0_bypass_clk", IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_BYPASS);
imx_clk_scu("mipi0_pixel_clk", IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_PER);
- imx_clk_scu("mipi0_lvds_pixel_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC2);
imx_clk_scu("mipi0_lvds_bypass_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_BYPASS);
- imx_clk_scu("mipi0_lvds_phy_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC3);
+ imx_clk_scu2("mipi0_lvds_pixel_clk", lvds0_sels, ARRAY_SIZE(lvds0_sels), IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC2);
+ imx_clk_scu2("mipi0_lvds_phy_clk", lvds0_sels, ARRAY_SIZE(lvds0_sels), IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC3);
imx_clk_scu2("mipi0_dsi_tx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_MST_BUS);
imx_clk_scu2("mipi0_dsi_rx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_SLV_BUS);
imx_clk_scu2("mipi0_dsi_phy_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_PHY);
@@ -219,9 +235,9 @@ static int imx8qxp_clk_probe(struct platform_device *pdev)
imx_clk_scu("mipi1_bypass_clk", IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_BYPASS);
imx_clk_scu("mipi1_pixel_clk", IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_PER);
- imx_clk_scu("mipi1_lvds_pixel_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC2);
imx_clk_scu("mipi1_lvds_bypass_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_BYPASS);
- imx_clk_scu("mipi1_lvds_phy_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC3);
+ imx_clk_scu2("mipi1_lvds_pixel_clk", lvds1_sels, ARRAY_SIZE(lvds1_sels), IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC2);
+ imx_clk_scu2("mipi1_lvds_phy_clk", lvds1_sels, ARRAY_SIZE(lvds1_sels), IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC3);
imx_clk_scu2("mipi1_dsi_tx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_MST_BUS);
imx_clk_scu2("mipi1_dsi_rx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_SLV_BUS);
--
2.43.0
From: Danylo Piliaiev <[email protected]>
[ Upstream commit 07e6de738aa6f0e873463e9ca88bdb7081c4bfd4 ]
KGSL doesn't support a690 so all reg values were the same as
on a660. Now we know the values and they are different from the
windows driver.
This fixes hangs on D3D12 games and some CTS tests.
Signed-off-by: Danylo Piliaiev <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/568931/
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 7a0220d29a23..500ed2d183fc 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -1312,6 +1312,7 @@ static void a6xx_set_ubwc_config(struct msm_gpu *gpu)
if (adreno_is_a650(adreno_gpu) ||
adreno_is_a660(adreno_gpu) ||
+ adreno_is_a690(adreno_gpu) ||
adreno_is_a730(adreno_gpu) ||
adreno_is_a740_family(adreno_gpu)) {
/* TODO: get ddr type from bootloader and use 2 for LPDDR4 */
@@ -1321,13 +1322,6 @@ static void a6xx_set_ubwc_config(struct msm_gpu *gpu)
uavflagprd_inv = 2;
}
- if (adreno_is_a690(adreno_gpu)) {
- hbb_lo = 2;
- amsbc = 1;
- rgb565_predicator = 1;
- uavflagprd_inv = 2;
- }
-
if (adreno_is_7c3(adreno_gpu)) {
hbb_lo = 1;
amsbc = 1;
@@ -1741,7 +1735,9 @@ static int hw_init(struct msm_gpu *gpu)
/* Setting the primFifo thresholds default values,
* and vccCacheSkipDis=1 bit (0x200) for A640 and newer
*/
- if (adreno_is_a650(adreno_gpu) || adreno_is_a660(adreno_gpu) || adreno_is_a690(adreno_gpu))
+ if (adreno_is_a690(adreno_gpu))
+ gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, 0x00800200);
+ else if (adreno_is_a650(adreno_gpu) || adreno_is_a660(adreno_gpu))
gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, 0x00300200);
else if (adreno_is_a640_family(adreno_gpu) || adreno_is_7c3(adreno_gpu))
gpu_write(gpu, REG_A6XX_PC_DBG_ECO_CNTL, 0x00200200);
@@ -1775,6 +1771,8 @@ static int hw_init(struct msm_gpu *gpu)
if (adreno_is_a730(adreno_gpu) ||
adreno_is_a740_family(adreno_gpu))
gpu_write(gpu, REG_A6XX_RBBM_INTERFACE_HANG_INT_CNTL, (1 << 30) | 0xcfffff);
+ else if (adreno_is_a690(adreno_gpu))
+ gpu_write(gpu, REG_A6XX_RBBM_INTERFACE_HANG_INT_CNTL, (1 << 30) | 0x4fffff);
else if (adreno_is_a619(adreno_gpu))
gpu_write(gpu, REG_A6XX_RBBM_INTERFACE_HANG_INT_CNTL, (1 << 30) | 0x3fffff);
else if (adreno_is_a610(adreno_gpu))
@@ -1808,12 +1806,17 @@ static int hw_init(struct msm_gpu *gpu)
a6xx_set_cp_protect(gpu);
if (adreno_is_a660_family(adreno_gpu)) {
- gpu_write(gpu, REG_A6XX_CP_CHICKEN_DBG, 0x1);
+ if (adreno_is_a690(adreno_gpu))
+ gpu_write(gpu, REG_A6XX_CP_CHICKEN_DBG, 0x00028801);
+ else
+ gpu_write(gpu, REG_A6XX_CP_CHICKEN_DBG, 0x1);
gpu_write(gpu, REG_A6XX_RBBM_GBIF_CLIENT_QOS_CNTL, 0x0);
}
+ if (adreno_is_a690(adreno_gpu))
+ gpu_write(gpu, REG_A6XX_UCHE_CMDQ_CONFIG, 0x90);
/* Set dualQ + disable afull for A660 GPU */
- if (adreno_is_a660(adreno_gpu))
+ else if (adreno_is_a660(adreno_gpu))
gpu_write(gpu, REG_A6XX_UCHE_CMDQ_CONFIG, 0x66906);
else if (adreno_is_a7xx(adreno_gpu))
gpu_write(gpu, REG_A6XX_UCHE_CMDQ_CONFIG,
--
2.43.0
From: Wenjing Liu <[email protected]>
[ Upstream commit 08a32addf17317b9fac55be9b31275cbf6e41fb7 ]
Current implementation will choose to use refclk as dscclk. This is not
recommended by hardware team as refclk is a fixed value which could
cause unnecessary power consumption or it could be not enough for large
DSC timings. So we are adding new interfaces so we could switch to use
dynamically generated DSCCLK by DTO. So DSCCLK is programmable based on
current pixel clock and dispclk.
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: Chaitanya Dhere <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Wenjing Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 25 +++++++++++++++++
drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h | 4 +++
.../gpu/drm/amd/display/dc/link/link_dpms.c | 27 ++++++++++++++++++-
3 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
index c1a9b746c43f..0f0972ad441a 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
@@ -995,9 +995,22 @@ static int calc_mpc_flow_ctrl_cnt(const struct dc_stream_state *stream,
static void update_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable)
{
struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc;
+ struct dc *dc = pipe_ctx->stream->ctx->dc;
struct dc_stream_state *stream = pipe_ctx->stream;
struct pipe_ctx *odm_pipe;
int opp_cnt = 1;
+ struct dccg *dccg = dc->res_pool->dccg;
+ /* It has been found that when DSCCLK is lower than 16Mhz, we will get DCN
+ * register access hung. When DSCCLk is based on refclk, DSCCLk is always a
+ * fixed value higher than 16Mhz so the issue doesn't occur. When DSCCLK is
+ * generated by DTO, DSCCLK would be based on 1/3 dispclk. For small timings
+ * with DSC such as 480p60Hz, the dispclk could be low enough to trigger
+ * this problem. We are implementing a workaround here to keep using dscclk
+ * based on fixed value refclk when timing is smaller than 3x16Mhz (i.e
+ * 48Mhz) pixel clock to avoid hitting this problem.
+ */
+ bool should_use_dto_dscclk = (dccg->funcs->set_dto_dscclk != NULL) &&
+ stream->timing.pix_clk_100hz > 480000;
ASSERT(dsc);
for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe)
@@ -1020,12 +1033,16 @@ static void update_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable)
dsc->funcs->dsc_set_config(dsc, &dsc_cfg, &dsc_optc_cfg);
dsc->funcs->dsc_enable(dsc, pipe_ctx->stream_res.opp->inst);
+ if (should_use_dto_dscclk)
+ dccg->funcs->set_dto_dscclk(dccg, dsc->inst);
for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) {
struct display_stream_compressor *odm_dsc = odm_pipe->stream_res.dsc;
ASSERT(odm_dsc);
odm_dsc->funcs->dsc_set_config(odm_dsc, &dsc_cfg, &dsc_optc_cfg);
odm_dsc->funcs->dsc_enable(odm_dsc, odm_pipe->stream_res.opp->inst);
+ if (should_use_dto_dscclk)
+ dccg->funcs->set_dto_dscclk(dccg, odm_dsc->inst);
}
dsc_cfg.dc_dsc_cfg.num_slices_h *= opp_cnt;
dsc_cfg.pic_width *= opp_cnt;
@@ -1045,9 +1062,13 @@ static void update_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable)
OPTC_DSC_DISABLED, 0, 0);
/* disable DSC block */
+ if (dccg->funcs->set_ref_dscclk)
+ dccg->funcs->set_ref_dscclk(dccg, pipe_ctx->stream_res.dsc->inst);
dsc->funcs->dsc_disable(pipe_ctx->stream_res.dsc);
for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) {
ASSERT(odm_pipe->stream_res.dsc);
+ if (dccg->funcs->set_ref_dscclk)
+ dccg->funcs->set_ref_dscclk(dccg, odm_pipe->stream_res.dsc->inst);
odm_pipe->stream_res.dsc->funcs->dsc_disable(odm_pipe->stream_res.dsc);
}
}
@@ -1130,6 +1151,10 @@ void dcn32_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx *
if (!pipe_ctx->next_odm_pipe && current_pipe_ctx->next_odm_pipe &&
current_pipe_ctx->next_odm_pipe->stream_res.dsc) {
struct display_stream_compressor *dsc = current_pipe_ctx->next_odm_pipe->stream_res.dsc;
+ struct dccg *dccg = dc->res_pool->dccg;
+
+ if (dccg->funcs->set_ref_dscclk)
+ dccg->funcs->set_ref_dscclk(dccg, dsc->inst);
/* disconnect DSC block from stream */
dsc->funcs->dsc_disconnect(dsc);
}
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h b/drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h
index ce2f0c0e82bd..6b44557fcb1a 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h
@@ -201,6 +201,10 @@ struct dccg_funcs {
struct dccg *dccg,
enum streamclk_source src,
uint32_t otg_inst);
+ void (*set_dto_dscclk)(
+ struct dccg *dccg,
+ uint32_t dsc_inst);
+ void (*set_ref_dscclk)(struct dccg *dccg, uint32_t dsc_inst);
};
#endif //__DAL_DCCG_H__
diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
index a3b3aec05d6b..fc08ff8bebc3 100644
--- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
+++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
@@ -776,10 +776,26 @@ static bool dp_set_dsc_on_rx(struct pipe_ctx *pipe_ctx, bool enable)
*/
void link_set_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable)
{
+ /* TODO: Move this to HWSS as this is hardware programming sequence not a
+ * link layer sequence
+ */
struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc;
+ struct dc *dc = pipe_ctx->stream->ctx->dc;
struct dc_stream_state *stream = pipe_ctx->stream;
struct pipe_ctx *odm_pipe;
int opp_cnt = 1;
+ struct dccg *dccg = dc->res_pool->dccg;
+ /* It has been found that when DSCCLK is lower than 16Mhz, we will get DCN
+ * register access hung. When DSCCLk is based on refclk, DSCCLk is always a
+ * fixed value higher than 16Mhz so the issue doesn't occur. When DSCCLK is
+ * generated by DTO, DSCCLK would be based on 1/3 dispclk. For small timings
+ * with DSC such as 480p60Hz, the dispclk could be low enough to trigger
+ * this problem. We are implementing a workaround here to keep using dscclk
+ * based on fixed value refclk when timing is smaller than 3x16Mhz (i.e
+ * 48Mhz) pixel clock to avoid hitting this problem.
+ */
+ bool should_use_dto_dscclk = (dccg->funcs->set_dto_dscclk != NULL) &&
+ stream->timing.pix_clk_100hz > 480000;
DC_LOGGER_INIT(dsc->ctx->logger);
for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe)
@@ -802,11 +818,15 @@ void link_set_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable)
dsc->funcs->dsc_set_config(dsc, &dsc_cfg, &dsc_optc_cfg);
dsc->funcs->dsc_enable(dsc, pipe_ctx->stream_res.opp->inst);
+ if (should_use_dto_dscclk)
+ dccg->funcs->set_dto_dscclk(dccg, dsc->inst);
for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) {
struct display_stream_compressor *odm_dsc = odm_pipe->stream_res.dsc;
odm_dsc->funcs->dsc_set_config(odm_dsc, &dsc_cfg, &dsc_optc_cfg);
odm_dsc->funcs->dsc_enable(odm_dsc, odm_pipe->stream_res.opp->inst);
+ if (should_use_dto_dscclk)
+ dccg->funcs->set_dto_dscclk(dccg, odm_dsc->inst);
}
dsc_cfg.dc_dsc_cfg.num_slices_h *= opp_cnt;
dsc_cfg.pic_width *= opp_cnt;
@@ -856,9 +876,14 @@ void link_set_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable)
}
/* disable DSC block */
+ if (dccg->funcs->set_ref_dscclk)
+ dccg->funcs->set_ref_dscclk(dccg, pipe_ctx->stream_res.dsc->inst);
pipe_ctx->stream_res.dsc->funcs->dsc_disable(pipe_ctx->stream_res.dsc);
- for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe)
+ for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) {
+ if (dccg->funcs->set_ref_dscclk)
+ dccg->funcs->set_ref_dscclk(dccg, odm_pipe->stream_res.dsc->inst);
odm_pipe->stream_res.dsc->funcs->dsc_disable(odm_pipe->stream_res.dsc);
+ }
}
}
--
2.43.0
From: Srinivasan Shanmugam <[email protected]>
[ Upstream commit 4f32504a2f85a7b40fe149436881381f48e9c0c0 ]
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c:377 amdgpu_mca_smu_get_mca_entry() warn: variable dereferenced before check 'mca_funcs' (see line 368)
357 int amdgpu_mca_smu_get_mca_entry(struct amdgpu_device *adev,
enum amdgpu_mca_error_type type,
358 int idx, struct mca_bank_entry *entry)
359 {
360 const struct amdgpu_mca_smu_funcs *mca_funcs =
adev->mca.mca_funcs;
361 int count;
362
363 switch (type) {
364 case AMDGPU_MCA_ERROR_TYPE_UE:
365 count = mca_funcs->max_ue_count;
mca_funcs is dereferenced here.
366 break;
367 case AMDGPU_MCA_ERROR_TYPE_CE:
368 count = mca_funcs->max_ce_count;
mca_funcs is dereferenced here.
369 break;
370 default:
371 return -EINVAL;
372 }
373
374 if (idx >= count)
375 return -EINVAL;
376
377 if (mca_funcs && mca_funcs->mca_get_mca_entry)
^^^^^^^^^
Checked too late!
Cc: Yang Wang <[email protected]>
Cc: Hawking Zhang <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c
index cf33eb219e25..061d88f4480d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c
@@ -351,6 +351,9 @@ int amdgpu_mca_smu_get_mca_entry(struct amdgpu_device *adev, enum amdgpu_mca_err
const struct amdgpu_mca_smu_funcs *mca_funcs = adev->mca.mca_funcs;
int count;
+ if (!mca_funcs || !mca_funcs->mca_get_mca_entry)
+ return -EOPNOTSUPP;
+
switch (type) {
case AMDGPU_MCA_ERROR_TYPE_UE:
count = mca_funcs->max_ue_count;
@@ -365,10 +368,7 @@ int amdgpu_mca_smu_get_mca_entry(struct amdgpu_device *adev, enum amdgpu_mca_err
if (idx >= count)
return -EINVAL;
- if (mca_funcs && mca_funcs->mca_get_mca_entry)
- return mca_funcs->mca_get_mca_entry(adev, type, idx, entry);
-
- return -EOPNOTSUPP;
+ return mca_funcs->mca_get_mca_entry(adev, type, idx, entry);
}
#if defined(CONFIG_DEBUG_FS)
--
2.43.0
From: Srinivasan Shanmugam <[email protected]>
[ Upstream commit bf2ad4fb8adca89374b54b225d494e0b1956dbea ]
Return value of container_of(...) can't be null, so null check is not
required for 'fence'. Hence drop its NULL check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c:93 to_amdgpu_amdkfd_fence() warn: can 'fence' even be NULL?
Cc: Felix Kuehling <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c
index 469785d33791..1ef758ac5076 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c
@@ -90,7 +90,7 @@ struct amdgpu_amdkfd_fence *to_amdgpu_amdkfd_fence(struct dma_fence *f)
return NULL;
fence = container_of(f, struct amdgpu_amdkfd_fence, base);
- if (fence && f->ops == &amdkfd_fence_ops)
+ if (f->ops == &amdkfd_fence_ops)
return fence;
return NULL;
--
2.43.0
From: Nicholas Susanto <[email protected]>
[ Upstream commit 2ce156482a6fef349d2eba98e5070c412d3af662 ]
[Why]
When switching to another HDMI mode, we are unnecesarilly
disabling/enabling FIFO causing both HPO and DIG registers to be set at
the same time when only HPO is supposed to be set.
This can lead to a system hang the next time we change refresh rates as
there are cases when we don't disable OTG/FIFO but FIFO is enabled when
it isn't supposed to be.
[How]
Removing the enable/disable FIFO entirely.
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Nicholas Susanto <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
index d5fde7d23fbf..f3b0af2c0295 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
@@ -126,21 +126,13 @@ static void dcn35_disable_otg_wa(struct clk_mgr *clk_mgr_base, struct dc_state *
continue;
if (pipe->stream && (pipe->stream->dpms_off || dc_is_virtual_signal(pipe->stream->signal) ||
!pipe->stream->link_enc)) {
- struct stream_encoder *stream_enc = pipe->stream_res.stream_enc;
-
if (disable) {
- if (stream_enc && stream_enc->funcs->disable_fifo)
- pipe->stream_res.stream_enc->funcs->disable_fifo(stream_enc);
-
if (pipe->stream_res.tg && pipe->stream_res.tg->funcs->immediate_disable_crtc)
pipe->stream_res.tg->funcs->immediate_disable_crtc(pipe->stream_res.tg);
reset_sync_context_for_pipe(dc, context, i);
} else {
pipe->stream_res.tg->funcs->enable_crtc(pipe->stream_res.tg);
-
- if (stream_enc && stream_enc->funcs->enable_fifo)
- pipe->stream_res.stream_enc->funcs->enable_fifo(stream_enc);
}
}
}
--
2.43.0
From: bo liu <[email protected]>
[ Upstream commit 7aeb259086487417f0fecf66e325bee133e8813a ]
When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards,
the headset type detection circuit will recognize the headset type as CTIA.
At this point, plugout and plugin the headset will get the correct headset
type as OMTP.
The reason for the failure of headset type recognition is that the sound
card creation will enable the VREF voltage of the headset mic, which
interferes with the headset type automatic detection circuit. Plugout and
plugin the headset will restart the headset detection and get the correct
headset type.
The patch is disable the VREF voltage when the headset is not present, and
will enable the VREF voltage when the headset is present.
Signed-off-by: bo liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_conexant.c | 115 ++++++++++++++++++++++++++++++++-
1 file changed, 113 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index a889cccdd607..e8819e8a9876 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -21,6 +21,12 @@
#include "hda_jack.h"
#include "hda_generic.h"
+enum {
+ CX_HEADSET_NOPRESENT = 0,
+ CX_HEADSET_PARTPRESENT,
+ CX_HEADSET_ALLPRESENT,
+};
+
struct conexant_spec {
struct hda_gen_spec gen;
@@ -42,7 +48,8 @@ struct conexant_spec {
unsigned int gpio_led;
unsigned int gpio_mute_led_mask;
unsigned int gpio_mic_led_mask;
-
+ unsigned int headset_present_flag;
+ bool is_cx8070_sn6140;
};
@@ -164,6 +171,27 @@ static void cxt_init_gpio_led(struct hda_codec *codec)
}
}
+static void cx_fixup_headset_recog(struct hda_codec *codec)
+{
+ unsigned int mic_persent;
+
+ /* fix some headset type recognize fail issue, such as EDIFIER headset */
+ /* set micbiasd output current comparator threshold from 66% to 55%. */
+ snd_hda_codec_write(codec, 0x1c, 0, 0x320, 0x010);
+ /* set OFF voltage for DFET from -1.2V to -0.8V, set headset micbias registor
+ * value adjustment trim from 2.2K ohms to 2.0K ohms.
+ */
+ snd_hda_codec_write(codec, 0x1c, 0, 0x3b0, 0xe10);
+ /* fix reboot headset type recognize fail issue */
+ mic_persent = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0x0);
+ if (mic_persent & AC_PINSENSE_PRESENCE)
+ /* enable headset mic VREF */
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24);
+ else
+ /* disable headset mic VREF */
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20);
+}
+
static int cx_auto_init(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
@@ -174,6 +202,9 @@ static int cx_auto_init(struct hda_codec *codec)
cxt_init_gpio_led(codec);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT);
+ if (spec->is_cx8070_sn6140)
+ cx_fixup_headset_recog(codec);
+
return 0;
}
@@ -192,6 +223,77 @@ static void cx_auto_free(struct hda_codec *codec)
snd_hda_gen_free(codec);
}
+static void cx_process_headset_plugin(struct hda_codec *codec)
+{
+ unsigned int val;
+ unsigned int count = 0;
+
+ /* Wait headset detect done. */
+ do {
+ val = snd_hda_codec_read(codec, 0x1c, 0, 0xca0, 0x0);
+ if (val & 0x080) {
+ codec_dbg(codec, "headset type detect done!\n");
+ break;
+ }
+ msleep(20);
+ count++;
+ } while (count < 3);
+ val = snd_hda_codec_read(codec, 0x1c, 0, 0xcb0, 0x0);
+ if (val & 0x800) {
+ codec_dbg(codec, "headset plugin, type is CTIA\n");
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24);
+ } else if (val & 0x400) {
+ codec_dbg(codec, "headset plugin, type is OMTP\n");
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24);
+ } else {
+ codec_dbg(codec, "headphone plugin\n");
+ }
+}
+
+static void cx_update_headset_mic_vref(struct hda_codec *codec, unsigned int res)
+{
+ unsigned int phone_present, mic_persent, phone_tag, mic_tag;
+ struct conexant_spec *spec = codec->spec;
+
+ /* In cx8070 and sn6140, the node 16 can only be config to headphone or disabled,
+ * the node 19 can only be config to microphone or disabled.
+ * Check hp&mic tag to process headset pulgin&plugout.
+ */
+ phone_tag = snd_hda_codec_read(codec, 0x16, 0, AC_VERB_GET_UNSOLICITED_RESPONSE, 0x0);
+ mic_tag = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_UNSOLICITED_RESPONSE, 0x0);
+ if ((phone_tag & (res >> AC_UNSOL_RES_TAG_SHIFT)) ||
+ (mic_tag & (res >> AC_UNSOL_RES_TAG_SHIFT))) {
+ phone_present = snd_hda_codec_read(codec, 0x16, 0, AC_VERB_GET_PIN_SENSE, 0x0);
+ if (!(phone_present & AC_PINSENSE_PRESENCE)) {/* headphone plugout */
+ spec->headset_present_flag = CX_HEADSET_NOPRESENT;
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20);
+ return;
+ }
+ if (spec->headset_present_flag == CX_HEADSET_NOPRESENT) {
+ spec->headset_present_flag = CX_HEADSET_PARTPRESENT;
+ } else if (spec->headset_present_flag == CX_HEADSET_PARTPRESENT) {
+ mic_persent = snd_hda_codec_read(codec, 0x19, 0,
+ AC_VERB_GET_PIN_SENSE, 0x0);
+ /* headset is present */
+ if ((phone_present & AC_PINSENSE_PRESENCE) &&
+ (mic_persent & AC_PINSENSE_PRESENCE)) {
+ cx_process_headset_plugin(codec);
+ spec->headset_present_flag = CX_HEADSET_ALLPRESENT;
+ }
+ }
+ }
+}
+
+static void cx_jack_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ struct conexant_spec *spec = codec->spec;
+
+ if (spec->is_cx8070_sn6140)
+ cx_update_headset_mic_vref(codec, res);
+
+ snd_hda_jack_unsol_event(codec, res);
+}
+
#ifdef CONFIG_PM
static int cx_auto_suspend(struct hda_codec *codec)
{
@@ -205,7 +307,7 @@ static const struct hda_codec_ops cx_auto_patch_ops = {
.build_pcms = snd_hda_gen_build_pcms,
.init = cx_auto_init,
.free = cx_auto_free,
- .unsol_event = snd_hda_jack_unsol_event,
+ .unsol_event = cx_jack_unsol_event,
#ifdef CONFIG_PM
.suspend = cx_auto_suspend,
.check_power_status = snd_hda_gen_check_power_status,
@@ -1042,6 +1144,15 @@ static int patch_conexant_auto(struct hda_codec *codec)
codec->spec = spec;
codec->patch_ops = cx_auto_patch_ops;
+ /* init cx8070/sn6140 flag and reset headset_present_flag */
+ switch (codec->core.vendor_id) {
+ case 0x14f11f86:
+ case 0x14f11f87:
+ spec->is_cx8070_sn6140 = true;
+ spec->headset_present_flag = CX_HEADSET_NOPRESENT;
+ break;
+ }
+
cx_auto_parse_eapd(codec);
spec->gen.own_eapd_ctl = 1;
--
2.43.0
From: Namjae Jeon <[email protected]>
[ Upstream commit bb05367a66a9990d2c561282f5620bb1dbe40c28 ]
If file opened with v2 lease is upgraded with v1 lease, smb server
should response v2 lease create context to client.
This patch fix smb2.lease.v2_epoch2 test failure.
This test case assumes the following scenario:
1. smb2 create with v2 lease(R, LEASE1 key)
2. smb server return smb2 create response with v2 lease context(R,
LEASE1 key, epoch + 1)
3. smb2 create with v1 lease(RH, LEASE1 key)
4. smb server return smb2 create response with v2 lease context(RH,
LEASE1 key, epoch + 2)
i.e. If same client(same lease key) try to open a file that is being
opened with v2 lease with v1 lease, smb server should return v2 lease.
Signed-off-by: Namjae Jeon <[email protected]>
Acked-by: Tom Talpey <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/smb/server/oplock.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c
index 562b180459a1..9a19d8b06c8c 100644
--- a/fs/smb/server/oplock.c
+++ b/fs/smb/server/oplock.c
@@ -1036,6 +1036,7 @@ static void copy_lease(struct oplock_info *op1, struct oplock_info *op2)
lease2->duration = lease1->duration;
lease2->flags = lease1->flags;
lease2->epoch = lease1->epoch++;
+ lease2->version = lease1->version;
}
static int add_lease_global_list(struct oplock_info *opinfo)
--
2.43.0
From: Daniel Vacek <[email protected]>
[ Upstream commit 4f973e211b3b1c6d36f7c6a19239d258856749f9 ]
Releasing the `priv->lock` while iterating the `priv->multicast_list` in
`ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to
remove the items while in the middle of iteration. If the mcast is removed
while the lock was dropped, the for loop spins forever resulting in a hard
lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel):
Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below)
-----------------------------------+-----------------------------------
ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work)
spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...)
list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev)
&priv->multicast_list, list) |
ipoib_mcast_join(dev, mcast) |
spin_unlock_irq(&priv->lock) |
| spin_lock_irqsave(&priv->lock, flags)
| list_for_each_entry_safe(mcast, tmcast,
| &priv->multicast_list, list)
| list_del(&mcast->list);
| list_add_tail(&mcast->list, &remove_list)
| spin_unlock_irqrestore(&priv->lock, flags)
spin_lock_irq(&priv->lock) |
| ipoib_mcast_remove_list(&remove_list)
(Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast,
`priv->multicast_list` and we keep | remove_list, list)
spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done)
the other thread which is blocked |
and the list is still valid on |
it's stack.)
Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent
eventual sleeps.
Unfortunately we could not reproduce the lockup and confirm this fix but
based on the code review I think this fix should address such lockups.
crash> bc 31
PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2"
--
[exception RIP: ipoib_mcast_join_task+0x1b1]
RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002
RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000
work (&priv->mcast_task{,.work})
RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000
&mcast->list
RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000
R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00
mcast
R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8
dev priv (&priv->lock) &priv->multicast_list (aka head)
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
--- <NMI exception stack> ---
#5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib]
#6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967
crash> rx ff646f199a8c7e68
ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work
crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000
(empty)
crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000
mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>,
mcast_mutex.owner.counter = 0xff1c69998efec000
crash> b 8
PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0"
--
#3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646
#4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib]
#5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib]
#6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib]
#7 [ff646f1980153e98] process_one_work+0x1a7 at ffffffff9bf10967
crash> rx ff646f1980153e68
ff646f1980153e68: ff1c6a1a04dc83f0 <<< work = &priv->flush_light
crash> ipoib_dev_priv.flush_light.func,broadcast ff1c6a1a04dc8000
flush_light.func = 0xffffffffc0943820 <ipoib_ib_dev_flush_light>,
broadcast = 0x0,
The mcast(s) on the `remove_list` (the remaining part of the ex `priv->multicast_list`):
crash> list -s ipoib_mcast.done.done ipoib_mcast.list -H ff646f1980153e10 | paste - -
ff1c6a192bd0c200 done.done = 0x0,
ff1c6a192d60ac00 done.done = 0x0,
Reported-by: Yuya Fujita-bishamonten <[email protected]>
Signed-off-by: Daniel Vacek <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 9e6967a40042..319d4288eddd 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -531,21 +531,17 @@ static int ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast)
if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags))
rec.join_state = SENDONLY_FULLMEMBER_JOIN;
}
- spin_unlock_irq(&priv->lock);
multicast = ib_sa_join_multicast(&ipoib_sa_client, priv->ca, priv->port,
- &rec, comp_mask, GFP_KERNEL,
+ &rec, comp_mask, GFP_ATOMIC,
ipoib_mcast_join_complete, mcast);
- spin_lock_irq(&priv->lock);
if (IS_ERR(multicast)) {
ret = PTR_ERR(multicast);
ipoib_warn(priv, "ib_sa_join_multicast failed, status %d\n", ret);
/* Requeue this join task with a backoff delay */
__ipoib_mcast_schedule_join_thread(priv, mcast, 1);
clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
- spin_unlock_irq(&priv->lock);
complete(&mcast->done);
- spin_lock_irq(&priv->lock);
return ret;
}
return 0;
--
2.43.0
From: Farah Kassabri <[email protected]>
[ Upstream commit d1958dce5ab6a3e089c60cf474e8c9b7e96e70ad ]
Stop rescheduling another heartbeat check when EQ heartbeat check fails
as it generates confusing logs in dmesg that the heartbeat fails.
Signed-off-by: Farah Kassabri <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/accel/habanalabs/common/device.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/accel/habanalabs/common/device.c b/drivers/accel/habanalabs/common/device.c
index 9e461c03e705..9290d4374551 100644
--- a/drivers/accel/habanalabs/common/device.c
+++ b/drivers/accel/habanalabs/common/device.c
@@ -1044,18 +1044,19 @@ static bool is_pci_link_healthy(struct hl_device *hdev)
return (vendor_id == PCI_VENDOR_ID_HABANALABS);
}
-static void hl_device_eq_heartbeat(struct hl_device *hdev)
+static int hl_device_eq_heartbeat_check(struct hl_device *hdev)
{
- u64 event_mask = HL_NOTIFIER_EVENT_DEVICE_RESET | HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE;
struct asic_fixed_properties *prop = &hdev->asic_prop;
if (!prop->cpucp_info.eq_health_check_supported)
- return;
+ return 0;
if (hdev->eq_heartbeat_received)
hdev->eq_heartbeat_received = false;
else
- hl_device_cond_reset(hdev, HL_DRV_RESET_HARD, event_mask);
+ return -EIO;
+
+ return 0;
}
static void hl_device_heartbeat(struct work_struct *work)
@@ -1072,10 +1073,9 @@ static void hl_device_heartbeat(struct work_struct *work)
/*
* For EQ health check need to check if driver received the heartbeat eq event
* in order to validate the eq is working.
+ * Only if both the EQ is healthy and we managed to send the next heartbeat reschedule.
*/
- hl_device_eq_heartbeat(hdev);
-
- if (!hdev->asic_funcs->send_heartbeat(hdev))
+ if ((!hl_device_eq_heartbeat_check(hdev)) && (!hdev->asic_funcs->send_heartbeat(hdev)))
goto reschedule;
if (hl_device_operational(hdev, NULL))
--
2.43.0
From: Rob Clark <[email protected]>
[ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]
When we start getting these, we get a *lot*. So ratelimit it to not
flood dmesg.
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 5 ++++-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 1cf7ff6caff4..ff0e3591b44d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -39,6 +39,9 @@
#define DPU_ERROR_ENC(e, fmt, ...) DPU_ERROR("enc%d " fmt,\
(e) ? (e)->base.base.id : -1, ##__VA_ARGS__)
+#define DPU_ERROR_ENC_RATELIMITED(e, fmt, ...) DPU_ERROR_RATELIMITED("enc%d " fmt,\
+ (e) ? (e)->base.base.id : -1, ##__VA_ARGS__)
+
/*
* Two to anticipate panels that can do cmd/vid dynamic switching
* plan is to create all possible physical encoder types, and switch between
@@ -2339,7 +2342,7 @@ static void dpu_encoder_frame_done_timeout(struct timer_list *t)
return;
}
- DPU_ERROR_ENC(dpu_enc, "frame done timeout\n");
+ DPU_ERROR_ENC_RATELIMITED(dpu_enc, "frame done timeout\n");
event = DPU_ENCODER_FRAME_EVENT_ERROR;
trace_dpu_enc_frame_done_timeout(DRMID(drm_enc), event);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
index b6f53ca6e962..f5473d4dea92 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
@@ -51,6 +51,7 @@
} while (0)
#define DPU_ERROR(fmt, ...) pr_err("[dpu error]" fmt, ##__VA_ARGS__)
+#define DPU_ERROR_RATELIMITED(fmt, ...) pr_err_ratelimited("[dpu error]" fmt, ##__VA_ARGS__)
/**
* ktime_compare_safe - compare two ktime structures
--
2.43.0
From: Kieran Bingham <[email protected]>
[ Upstream commit d7b95ad7a8d56248dfc34f861e445fad7a4004f4 ]
The V4L2_CID_HBLANK control is marked as readonly and can only be a
single value.
Set the minimum and maximum value to match the mode value.
Reviewed-by: Umang Jain <[email protected]>
Signed-off-by: Kieran Bingham <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/imx335.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index ec729126274b..964a81bec5a4 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -962,8 +962,8 @@ static int imx335_init_controls(struct imx335 *imx335)
imx335->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_HBLANK,
- IMX335_REG_MIN,
- IMX335_REG_MAX,
+ mode->hblank,
+ mode->hblank,
1, mode->hblank);
if (imx335->hblank_ctrl)
imx335->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
--
2.43.0
From: Relja Vojvodic <[email protected]>
[ Upstream commit 292c2116b2ae84c7e799ae340981e60551b18f5e ]
For certain dual display configs that had one display using a 1080p
mode, the DPM level used to drive the configs regressed from DPM 0 to
DPM 3. This was caused by a missing check that should have only limited
the pipe segments on non-phantom pipes. This caused issues with detile
buffer allocation, which dissallow subvp from being used
Tested-by: Daniel Wheeler <[email protected]>
Reviewed-by: Dillon Varone <[email protected]>
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Relja Vojvodic <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
index bc5f0db23d0c..a9c45174abed 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
@@ -290,7 +290,7 @@ static void override_det_for_subvp(struct dc *dc, struct dc_state *context, uint
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
- if (pipe_ctx->stream && pipe_ctx->plane_state && pipe_ctx->stream->mall_stream_config.type != SUBVP_PHANTOM) {
+ if (pipe_ctx->stream && pipe_ctx->plane_state && pipe_ctx->stream->mall_stream_config.type != SUBVP_PHANTOM != SUBVP_PHANTOM) {
if (pipe_ctx->stream->timing.v_addressable == 1080 && pipe_ctx->stream->timing.h_addressable == 1920) {
if (pipe_segments[i] > 4)
pipe_segments[i] = 4;
--
2.43.0
From: Allen Pan <[email protected]>
[ Upstream commit 0d26644bc57d8737c8e2fb3145366f7d0b941935 ]
[why]
BIOS switches to use USB-C connector type 0x18, but VBIOS's
objectInfo table not supported yet. driver needs to patch it
based on enc_cap from system integration info table.
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Allen Pan <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
index f91e08895275..da94e5309fba 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
@@ -256,6 +256,10 @@ void dcn35_link_encoder_construct(
enc10->base.features.flags.bits.IS_UHBR10_CAPABLE = bp_cap_info.DP_UHBR10_EN;
enc10->base.features.flags.bits.IS_UHBR13_5_CAPABLE = bp_cap_info.DP_UHBR13_5_EN;
enc10->base.features.flags.bits.IS_UHBR20_CAPABLE = bp_cap_info.DP_UHBR20_EN;
+ if (bp_cap_info.DP_IS_USB_C) {
+ /*BIOS not switch to use CONNECTOR_ID_USBC = 24 yet*/
+ enc10->base.features.flags.bits.DP_IS_USB_C = 1;
+ }
} else {
DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
@@ -264,4 +268,5 @@ void dcn35_link_encoder_construct(
}
if (enc10->base.ctx->dc->debug.hdmi20_disable)
enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
+
}
--
2.43.0
From: Ivan Lipski <[email protected]>
[ Upstream commit d6398866a6b47e92319ef6efdb0126a4fbb7796a ]
This reverts commit 44e60b14d5a72f91fd0bdeae8da59ae37a3ca8e5.
Since, it causes a regression in which eDP displays with PSR support,
but no Replay support (Sink support <= 0x03), fail to enable PSR and
consequently all IGT amd_psr tests fail. So, revert this until a more
suitable fix can be found.
This got brought back accidently with the backmerge.
Acked-by: Leo Li <[email protected]>
Signed-off-by: Ivan Lipski <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 22 -------------------
.../amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 9 +-------
drivers/gpu/drm/amd/include/amd_shared.h | 2 --
3 files changed, 1 insertion(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 4e82ee4d74ac..cf32502d669f 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -65,7 +65,6 @@
#include "amdgpu_dm_debugfs.h"
#endif
#include "amdgpu_dm_psr.h"
-#include "amdgpu_dm_replay.h"
#include "ivsrcid/ivsrcid_vislands30.h"
@@ -4345,7 +4344,6 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
enum dc_connection_type new_connection_type = dc_connection_none;
const struct dc_plane_cap *plane;
bool psr_feature_enabled = false;
- bool replay_feature_enabled = false;
int max_overlay = dm->dc->caps.max_slave_planes;
dm->display_indexes_num = dm->dc->caps.max_streams;
@@ -4457,20 +4455,6 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
}
}
- if (!(amdgpu_dc_debug_mask & DC_DISABLE_REPLAY)) {
- switch (adev->ip_versions[DCE_HWIP][0]) {
- case IP_VERSION(3, 1, 4):
- case IP_VERSION(3, 1, 5):
- case IP_VERSION(3, 1, 6):
- case IP_VERSION(3, 2, 0):
- case IP_VERSION(3, 2, 1):
- replay_feature_enabled = true;
- break;
- default:
- replay_feature_enabled = amdgpu_dc_feature_mask & DC_REPLAY_MASK;
- break;
- }
- }
/* loops over all connectors on the board */
for (i = 0; i < link_cnt; i++) {
struct dc_link *link = NULL;
@@ -4519,12 +4503,6 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
amdgpu_dm_update_connector_after_detect(aconnector);
setup_backlight_device(dm, aconnector);
- /*
- * Disable psr if replay can be enabled
- */
- if (replay_feature_enabled && amdgpu_dm_setup_replay(link, aconnector))
- psr_feature_enabled = false;
-
if (psr_feature_enabled)
amdgpu_dm_set_psr_caps(link);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
index cb0b48bb2a7d..d2834ad85a54 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
@@ -29,7 +29,6 @@
#include "dc.h"
#include "amdgpu.h"
#include "amdgpu_dm_psr.h"
-#include "amdgpu_dm_replay.h"
#include "amdgpu_dm_crtc.h"
#include "amdgpu_dm_plane.h"
#include "amdgpu_dm_trace.h"
@@ -124,12 +123,7 @@ static void amdgpu_dm_crtc_vblank_control_worker(struct work_struct *work)
* fill_dc_dirty_rects().
*/
if (vblank_work->stream && vblank_work->stream->link) {
- /*
- * Prioritize replay, instead of psr
- */
- if (vblank_work->stream->link->replay_settings.replay_feature_enabled)
- amdgpu_dm_replay_enable(vblank_work->stream, false);
- else if (vblank_work->enable) {
+ if (vblank_work->enable) {
if (vblank_work->stream->link->psr_settings.psr_version < DC_PSR_VERSION_SU_1 &&
vblank_work->stream->link->psr_settings.psr_allow_active)
amdgpu_dm_psr_disable(vblank_work->stream);
@@ -138,7 +132,6 @@ static void amdgpu_dm_crtc_vblank_control_worker(struct work_struct *work)
#ifdef CONFIG_DRM_AMD_SECURE_DISPLAY
!amdgpu_dm_crc_window_is_activated(&vblank_work->acrtc->base) &&
#endif
- vblank_work->stream->link->panel_config.psr.disallow_replay &&
vblank_work->acrtc->dm_irq_params.allow_psr_entry) {
amdgpu_dm_psr_enable(vblank_work->stream);
}
diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h
index 7f98394338c2..579977f6ad52 100644
--- a/drivers/gpu/drm/amd/include/amd_shared.h
+++ b/drivers/gpu/drm/amd/include/amd_shared.h
@@ -244,7 +244,6 @@ enum DC_FEATURE_MASK {
DC_DISABLE_LTTPR_DP2_0 = (1 << 6), //0x40, disabled by default
DC_PSR_ALLOW_SMU_OPT = (1 << 7), //0x80, disabled by default
DC_PSR_ALLOW_MULTI_DISP_OPT = (1 << 8), //0x100, disabled by default
- DC_REPLAY_MASK = (1 << 9), //0x200, disabled by default for dcn < 3.1.4
};
enum DC_DEBUG_MASK {
@@ -255,7 +254,6 @@ enum DC_DEBUG_MASK {
DC_DISABLE_PSR = 0x10,
DC_FORCE_SUBVP_MCLK_SWITCH = 0x20,
DC_DISABLE_MPO = 0x40,
- DC_DISABLE_REPLAY = 0x50,
DC_ENABLE_DPIA_TRACE = 0x80,
};
--
2.43.0
Hi Sasha,
This patch needs additional patches to work:
dcaca1b5f0d4 ALSA: hda/tas2781: annotate calibration data endianness
c3ca4458cc2f ALSA: hda/tas2781: add TAS2563 support for 14ARB7
c021ca729fe8 ALSA: hda/tas2781: add configurable global i2c address
76f5f55c45b9 ALSA: hda/tas2781: add ptrs to calibration functions
68f7f3ff6c2a ALSA: hda/tas2781: configure the amp after firmware load
Please add these if possible, or drop this patch from 6.6 and 6.7.
Thanks,
Gergo
On Mon, 2024-01-22 at 09:51 -0500, Sasha Levin wrote:
> From: Gergo Koteles <[email protected]>
>
> [ Upstream commit b5cb53fd32779f3a971c45bcd997ae2608aa1086 ]
>
> The 14ARB7 has two tas2563 amplifier on i2c.
> Connect it to the tas2781 driver.
>
> Signed-off-by: Gergo Koteles <[email protected]>
> Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.hu
> Signed-off-by: Takashi Iwai <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> sound/pci/hda/patch_realtek.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 70b17b08d4ff..9606f2448fda 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -6984,6 +6984,12 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc,
> tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781");
> }
>
> +static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc,
> + const struct hda_fixup *fix, int action)
> +{
> + tas2781_generic_fixup(cdc, action, "i2c", "INT8866");
> +}
> +
> /* for alc295_fixup_hp_top_speakers */
> #include "hp_x360_helper.c"
>
> @@ -7454,6 +7460,7 @@ enum {
> ALC236_FIXUP_DELL_DUAL_CODECS,
> ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI,
> ALC287_FIXUP_TAS2781_I2C,
> + ALC287_FIXUP_YOGA7_14ARB7_I2C,
> ALC245_FIXUP_HP_MUTE_LED_COEFBIT,
> ALC245_FIXUP_HP_X360_MUTE_LEDS,
> ALC287_FIXUP_THINKPAD_I2S_SPK,
> @@ -9568,6 +9575,12 @@ static const struct hda_fixup alc269_fixups[] = {
> .chained = true,
> .chain_id = ALC269_FIXUP_THINKPAD_ACPI,
> },
> + [ALC287_FIXUP_YOGA7_14ARB7_I2C] = {
> + .type = HDA_FIXUP_FUNC,
> + .v.func = yoga7_14arb7_fixup_i2c,
> + .chained = true,
> + .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK,
> + },
> [ALC245_FIXUP_HP_MUTE_LED_COEFBIT] = {
> .type = HDA_FIXUP_FUNC,
> .v.func = alc245_fixup_hp_mute_led_coefbit,
> @@ -10221,6 +10234,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
> SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
> SND_PCI_QUIRK(0x17aa, 0x3855, "Legion 7 16ITHG6", ALC287_FIXUP_LEGION_16ITHG6),
> SND_PCI_QUIRK(0x17aa, 0x3869, "Lenovo Yoga7 14IAL7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN),
> + SND_PCI_QUIRK(0x17aa, 0x3870, "Lenovo Yoga 7 14ARB7", ALC287_FIXUP_YOGA7_14ARB7_I2C),
> SND_PCI_QUIRK(0x17aa, 0x387d, "Yoga S780-16 pro Quad AAC", ALC287_FIXUP_TAS2781_I2C),
> SND_PCI_QUIRK(0x17aa, 0x387e, "Yoga S780-16 pro Quad YC", ALC287_FIXUP_TAS2781_I2C),
> SND_PCI_QUIRK(0x17aa, 0x3881, "YB9 dual power mode2 YC", ALC287_FIXUP_TAS2781_I2C),