According to the circuit diagram of User LEDs - RGB described in the
manual hifive-unleashed-a00.pdf[0] and hifive-unmatched-schematics-v3.pdf[1].
The behavior of PWM is acitve-high.
According to the descriptionof PWM for pwmcmp in SiFive FU740-C000 Manual[2].
The pwm algorithm is (PW) pulse active time = (D) duty * (T) period.
The `frac` variable is pulse "inactive" time so we need to invert it.
So this patchset removes active-low in DTS and adds reverse logic to the driver.
Updated patches: 1
New patches: 0
Unchanged patches: 2
Links:
- [0]: https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf
- [1]: https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf
- [2]: https://sifive.cdn.prismic.io/sifive/1a82e600-1f93-4f41-b2d8-86ed8b16acba_fu740-c000-manual-v1p6.pdf
Changed in v7:
- Remove active-low strings from hifive-unleashed-a00.dts file.
Changed in v6:
- Separate the idempotent test bug fixes into a new patch.
- Move the reversing the duty before the line checking
state->enabled.
- Fix the algorithm and change it to take the minimum value first and
then reverse it.
Changed in v5:
- Add the updates to the PWM algorithm based on version 2 back in.
- Replace div64_ul with DIV_ROUND_UP_ULL to correct the error in the
period value of the idempotent test in pwm_apply_state_debug.
Changed in v4:
- Remove previous updates to the PWM algorithm.
Changed in v3:
- Convert the reference link to standard link.
- Move the inverted function before taking the minimum value.
- Change polarity check condition(high and low).
- Pick the biggest period length possible that is not bigger than the
requested period.
Changed in v2:
- Convert the reference link to standard link.
- Fix typo: s/sifive unmatched:/sifive: unmatched:/.
- Remove active-low from hifive-unleashed-a00.dts.
- Include this reference link in the dts and pwm commit messages.
Nylon Chen (3):
riscv: dts: sifive: unleashed/unmatched: Remove PWM controlled LED's
active-low properties
pwm: sifive: change the PWM controlled LED algorithm
pwm: sifive: Fix the error in the idempotent test within the
pwm_apply_state_debug function
arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 12 ++++--------
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 12 ++++--------
drivers/pwm/pwm-sifive.c | 9 +++++----
3 files changed, 13 insertions(+), 20 deletions(-)
--
2.42.0