2024-01-25 00:45:35

by Abhishek Pandit-Subedi

[permalink] [raw]
Subject: [PATCH v2 0/3] usb: typec: ucsi: Adding support for UCSI 3.0

From: Abhishek Pandit-Subedi <[email protected]>


Hi Heikki,

This series starts the work adding UCSI 3.0 support to the UCSI driver.

There's a couple of pieces to start here:
* Add version checks and limit read size on 1.2.
* Update Connector Status and Connector Capability structures.
* Expose Partner PD revision from Capability data.

These were tested against on a 6.6 kernel running a usermode PPM against
a Realtek Evaluation board.

One additional note: there are a lot more unaligned fields in UCSI now
and the struct definitions are getting a bit out of hand. We can discuss
alternate mechanisms for defining these structs in the patch that
changes these structures.

Thanks,
Abhishek

Changes in v2:
- Changed log message to DEBUG
- Formatting changes and update macro to use brackets.
- Fix incorrect guard condition when checking connector capability.

Abhishek Pandit-Subedi (3):
usb: typec: ucsi: Limit read size on v1.2
usb: typec: ucsi: Update connector cap and status
usb: typec: ucsi: Get PD revision for partner

drivers/usb/typec/ucsi/ucsi.c | 49 +++++++++++++++++++++++++--
drivers/usb/typec/ucsi/ucsi.h | 64 ++++++++++++++++++++++++++++++++---
2 files changed, 107 insertions(+), 6 deletions(-)

--
2.43.0.429.g432eaa2c6b-goog



2024-01-25 00:45:41

by Abhishek Pandit-Subedi

[permalink] [raw]
Subject: [PATCH v2 1/3] usb: typec: ucsi: Limit read size on v1.2

From: Abhishek Pandit-Subedi <[email protected]>

Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was
increased from 16 to 256. In order to avoid overflowing reads for older
systems, add a mechanism to use the read UCSI version to truncate read
sizes on UCSI v1.2.

Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
---
Tested on 6.6 kernel. Dmesg output from this change:
[ 105.058162] ucsi_um_test ucsi_um_test_device.0: Registered UCSI
interface with version 3.0.0


Changes in v2:
- Changed log message to DEBUG

drivers/usb/typec/ucsi/ucsi.c | 26 ++++++++++++++++++++++++--
drivers/usb/typec/ucsi/ucsi.h | 11 +++++++++++
2 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 5392ec698959..a35056ee3e96 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -36,6 +36,19 @@
*/
#define UCSI_SWAP_TIMEOUT_MS 5000

+static int ucsi_read_message_in(struct ucsi *ucsi, void *buf,
+ size_t buf_size)
+{
+ /*
+ * Below UCSI 2.0, MESSAGE_IN was limited to 16 bytes. Truncate the
+ * reads here.
+ */
+ if (ucsi->version <= UCSI_VERSION_1_2)
+ buf_size = min_t(size_t, 16, buf_size);
+
+ return ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, buf, buf_size);
+}
+
static int ucsi_acknowledge_command(struct ucsi *ucsi)
{
u64 ctrl;
@@ -72,7 +85,7 @@ static int ucsi_read_error(struct ucsi *ucsi)
if (ret < 0)
return ret;

- ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, &error, sizeof(error));
+ ret = ucsi_read_message_in(ucsi, &error, sizeof(error));
if (ret)
return ret;

@@ -170,7 +183,7 @@ int ucsi_send_command(struct ucsi *ucsi, u64 command,
length = ret;

if (data) {
- ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, data, size);
+ ret = ucsi_read_message_in(ucsi, data, size);
if (ret)
goto out;
}
@@ -1556,6 +1569,15 @@ int ucsi_register(struct ucsi *ucsi)
if (!ucsi->version)
return -ENODEV;

+ /*
+ * Version format is JJ.M.N (JJ = Major version, M = Minor version,
+ * N = sub-minor version).
+ */
+ dev_dbg(ucsi->dev, "Registered UCSI interface with version %x.%x.%x",
+ UCSI_BCD_GET_MAJOR(ucsi->version),
+ UCSI_BCD_GET_MINOR(ucsi->version),
+ UCSI_BCD_GET_SUBMINOR(ucsi->version));
+
queue_delayed_work(system_long_wq, &ucsi->work, 0);

ucsi_debugfs_register(ucsi);
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 6478016d5cb8..bec920fa6b8a 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -23,6 +23,17 @@ struct dentry;
#define UCSI_CONTROL 8
#define UCSI_MESSAGE_IN 16
#define UCSI_MESSAGE_OUT 32
+#define UCSIv2_MESSAGE_OUT 272
+
+/* UCSI versions */
+#define UCSI_VERSION_1_2 0x0120
+#define UCSI_VERSION_2_0 0x0200
+#define UCSI_VERSION_2_1 0x0210
+#define UCSI_VERSION_3_0 0x0300
+
+#define UCSI_BCD_GET_MAJOR(_v_) (((_v_) >> 8) & 0xFF)
+#define UCSI_BCD_GET_MINOR(_v_) (((_v_) >> 4) & 0x0F)
+#define UCSI_BCD_GET_SUBMINOR(_v_) ((_v_) & 0x0F)

/* Command Status and Connector Change Indication (CCI) bits */
#define UCSI_CCI_CONNECTOR(_c_) (((_c_) & GENMASK(7, 1)) >> 1)
--
2.43.0.429.g432eaa2c6b-goog


2024-01-25 00:56:31

by Abhishek Pandit-Subedi

[permalink] [raw]
Subject: [PATCH v2 3/3] usb: typec: ucsi: Get PD revision for partner

From: Abhishek Pandit-Subedi <[email protected]>

PD major revision for the port partner is described in
GET_CONNECTOR_CAPABILITY and is only valid on UCSI 2.0 and newer. Update
the pd_revision on the partner if the UCSI version is 2.0 or newer.

Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
---
$ cat /sys/class/typec/port2-partner/usb_power_delivery_revision
3.0

Changes in v2:
- Formatting changes and update macro to use brackets.
- Fix incorrect guard condition when checking connector capability.

drivers/usb/typec/ucsi/ucsi.c | 23 +++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.h | 3 +++
2 files changed, 26 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index a35056ee3e96..2b7983d2fdae 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -782,6 +782,7 @@ static int ucsi_register_partner(struct ucsi_connector *con)
}

desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
+ desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);

partner = typec_register_partner(con->port, &desc);
if (IS_ERR(partner)) {
@@ -856,6 +857,27 @@ static void ucsi_partner_change(struct ucsi_connector *con)
con->num, u_role);
}

+static int ucsi_check_connector_capability(struct ucsi_connector *con)
+{
+ u64 command;
+ int ret;
+
+ if (!con->partner || !IS_MIN_VERSION_2_0(con->ucsi))
+ return 0;
+
+ command = UCSI_GET_CONNECTOR_CAPABILITY | UCSI_CONNECTOR_NUMBER(con->num);
+ ret = ucsi_send_command(con->ucsi, command, &con->cap, sizeof(con->cap));
+ if (ret < 0) {
+ dev_err(con->ucsi->dev, "GET_CONNECTOR_CAPABILITY failed (%d)\n", ret);
+ return ret;
+ }
+
+ typec_partner_set_pd_revision(con->partner,
+ UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags));
+
+ return ret;
+}
+
static int ucsi_check_connection(struct ucsi_connector *con)
{
u8 prev_flags = con->status.flags;
@@ -925,6 +947,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
ucsi_register_partner(con);
ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
+ ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);

if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
UCSI_CONSTAT_PWR_OPMODE_PD)
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 94b373378f63..a0c452d09cf6 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -36,6 +36,9 @@ struct dentry;
#define UCSI_BCD_GET_MINOR(_v_) (((_v_) >> 4) & 0x0F)
#define UCSI_BCD_GET_SUBMINOR(_v_) ((_v_) & 0x0F)

+#define IS_MIN_VERSION(ucsi, min_ver) ((ucsi)->version >= (min_ver))
+#define IS_MIN_VERSION_2_0(ucsi) IS_MIN_VERSION(ucsi, UCSI_VERSION_2_0)
+
/* Command Status and Connector Change Indication (CCI) bits */
#define UCSI_CCI_CONNECTOR(_c_) (((_c_) & GENMASK(7, 1)) >> 1)
#define UCSI_CCI_LENGTH(_c_) (((_c_) & GENMASK(15, 8)) >> 8)
--
2.43.0.429.g432eaa2c6b-goog