2024-01-25 10:08:25

by Chintan Vankar

[permalink] [raw]
Subject: [PATCH v3 3/5] arm64: dts: ti: k3-j784s4: Add Main CPSW2G node

From: Siddharth Vadapalli <[email protected]>

Add the device-tree nodes for the Main CPSW2G instance and enable it.

Signed-off-by: Siddharth Vadapalli <[email protected]>
Signed-off-by: Jayesh Choudhary <[email protected]>
Signed-off-by: Chintan Vankar <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 47 ++++++++++++++++++++++++
1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f34b92acc56d..826367ffa3f2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -279,6 +279,29 @@ &wkup_gpio0 {

&main_pmx0 {
bootph-all;
+ main_cpsw2g_default_pins: main-cpsw2g-default-pins {
+ pinctrl-single,pins = <
+ J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
+ J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
+ J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
+ J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
+ J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
+ J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
+ J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
+ J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
+ J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
+ J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
+ J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
+ J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
+ >;
+ };
+
+ main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
+ pinctrl-single,pins = <
+ J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
+ J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
+ >;
+ };
main_uart8_pins_default: main-uart8-default-pins {
bootph-all;
pinctrl-single,pins = <
@@ -808,6 +831,30 @@ &mcu_cpsw_port1 {
phy-handle = <&mcu_phy0>;
};

+&main_cpsw1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_cpsw2g_default_pins>;
+};
+
+&main_cpsw1_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
+
+ main_cpsw1_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+};
+
+&main_cpsw1_port1 {
+ status = "okay";
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&main_cpsw1_phy0>;
+};
+
&mailbox0_cluster0 {
status = "okay";
interrupts = <436>;
--
2.34.1